knetworkmanager will not compile [solved]

Anything that pertains to Portage

Moderator: Moderators

knetworkmanager will not compile [solved]

Postby Skippy » Sun May 10, 2009 22:45

Greetings. I'm running 64 bit version - have been using knetworkmanager for many moons. It now needs to be rebuilt as part of revdep-rebuild. However, it will not compile. Output below.

I checked bugs.gentoo.org and found 4 bugs for knetworkmanager, but they don't seem to apply to my situation.

Any ideas please?

On a related note: is there anything else that I can use which will do the same job as knetworkmanage? Give me a gui interface for selecting and connecting to a wireless network?

Thanks very much.

------------------------------

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] media-sound/vkeybd-0.1.17b USE="alsa -ladcca -oss" 0 kB
[ebuild R ] kde-misc/knetworkmanager-0.2.2_p20080528 USE="-arts* -cisco -debug -dialup -openvpn (-pptp) -xinerama*" 0 kB
[ebuild U ] gnome-extra/evolution-exchange-2.24.5 [2.24.2] USE="-debug -doc -static" 0 kB

- - blah blah blah - - start emerge of knetworkmanager - -

knetworkmanager-network.cpp:193: error: 'NM_802_11_CAP_PROTO_WEP' was not declared in this scope
knetworkmanager-network.cpp:195: error: 'NM_802_11_CAP_PROTO_WPA' was not declared in this scope
knetworkmanager-network.cpp:197: error: 'NM_802_11_CAP_PROTO_WPA2' was not declared in this scope
knetworkmanager-network.cpp: In member function 'bool Network::isEncrypted() const':
knetworkmanager-network.cpp:206: error: 'NM_802_11_CAP_PROTO_NONE' was not declared in this scope
make[3]: *** [knetworkmanager-network.lo] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
*
* ERROR: kde-misc/knetworkmanager-0.2.2_p20080528 failed.
* Call stack:
* ebuild.sh, line 48: Called src_compile
* environment, line 4292: Called kde_src_compile
* environment, line 3094: Called kde_src_compile 'all'
* environment, line 3219: Called kde_src_compile 'myconf' 'configure' 'make'
* environment, line 3215: Called die
* The specific snippet of code:
* emake || die "died running emake, $FUNCNAME:make"
* The die message:
* died running emake, kde_src_compile:make
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/usr/portage/distfiles/emerge-logs/kde-misc:knetworkmanager-0.2.2_p20080528:20090429-165645.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-misc/knetworkmanager-0.2.2_p20080528/temp/environment'.
*

>>> Failed to emerge kde-misc/knetworkmanager-0.2.2_p20080528, Log file:

-----------------------------------------------------

Portage 2.1.6.11 (default/linux/amd64/2008.0, gcc-4.3.3, glibc-2.9_p20081201-r2, 2.6.27-sabayon x86_64)
=================================================================
System uname: Linux-2.6.27-sabayon-x86_64-AMD_Turion-tm-_64_X2_Mobile_Technology_TL-50-with-gentoo-2.0.0
Timestamp of tree: Wed, 29 Apr 2009 11:45:01 +0000
distcc 3.0 x86_64-pc-linux-gnu [disabled]
app-shells/bash: 4.0_p17-r1
dev-java/java-config: 1.3.7, 2.1.7
dev-lang/python: 2.5.4-r2, 2.6.2
dev-python/pycrypto: 2.0.1-r6
dev-util/cmake: 2.6.3-r1
sys-apps/baselayout: 2.0.0
sys-apps/openrc: 0.3.0-r2
sys-apps/sandbox: 1.9
sys-devel/autoconf: 2.13, 2.63-r1
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils: 2.19.1-r1
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6a
virtual/os-headers: 2.6.28-r1
ACCEPT_KEYWORDS="amd64 ~amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-Os -march=x86-64 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/share/config/kdm /usr/kde/3.5/shutdown /usr/kde/4.2/env /usr/kde/4.2/share/config /usr/kde/4.2/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/skel /etc/splash /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-Os -march=x86-64 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="collision-protect distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://gentoo.llarian.net/ http://cudlug.cudenver.edu/gentoo/ http://gentoo.mirrors.tds.net/gentoo http://mirror.usu.edu/mirrors/gentoo/"
LANG="en_US.UTF-8"
LC_ALL="en_US.UTF-8"
LDFLAGS="-Wl,-O1"
LINGUAS="en en_GB en_US"
MAKEOPTS="-s -j3"
PKGDIR="/usr/portage/distfiles/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=" "
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="7Zip X a52 aac aalib accessibility acl acpi aiglx aim alsa amd64 artswrappersuid audiofile avahi berkdb bidi bluetooth bzip2 cairo cdda cddb cdr chm cjk cli config_wizard cpudetection cracklib crypt css cups dbox2 dbus device-mapper dga dri dts dv dvb dvd dvdr dvdread dvi encode extramodules fam fame fat ffmpeg fftw firefox flac flash foomatic-db fortran freetype gcj gdbm gif gimpprint gnutls gphoto2 gpm gs gsm gstreamer gtk hal hfs iconv icq ieee1394 imap inotify ipod ipv6 irc irda isdnlog jabber jack jfs jingle joystick jpeg kde kdeenablefinal kdehiddenvisibility kdeprefix kerberos kickoff kipi lame lcd libnotify live lj lm_sensors logitech-mouse lzo mad mail midi mikmod mjpeg mmx mng mozdevelop mp3 mp3rtp mpeg msn mudflap multilib musepack musicbrainz ncurses network new-login nls nptl nptlonly nsplugin ntfs ogg openal openexr opengl openmp pam pcmcia pcre pda perl png povray ppds pppd pulseaudio python qt3 qt3support qt4 quotas rar rdesktop readline reflection reiserfs rss scanner sdl session slp sms speex spell spl sse sse2 ssl startup-notification stream svg sysfs tcpd theora tiff tracker truetype udev unicode usb v4l v4l2 visualization voice vorbis weather wifi wmf x264 xcb xfs xine xinerama xml xorg xpm xprint xulrunner xvid xvmc yahoo zeroconf zlib" ALSA_CARDS="emu10k1x darla20 darla24 emu10k1 gina20 gina24 hdsp hdspm ice1712 indigo indigoio layla20 layla24 mia mixart mona pcxhr rme32 rme96 sb16 sbawe sscape usbusx2y vx222 usb-usx2y" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" APACHE2_MPMS="prefork" CAMERAS="agfa_cl20 casio_qv dimagev dimera3500 kodak_dc120 kodak_dc210 kodak_dc240 kodak_dc3200 kodak_ez200 konica_qm150 panasonic_coolshot panasonic_dc1000 panasonic_dc1580 panasonic_l859 polaroid_pdc320 polaroid_pdc640 polaroid_pdc700 ricoh_g3 sipix_blink sipix_blink2 sipix_web2 sony_dscf1 sony_dscf55 toshiba_pdrm11 adc65 aox barbie canon clicksmart310 digigr8 digita directory enigma13 fuji gsmart300 hp215 iclick jamcam jd11 konica largan lg_gsm mars mustek pccam300 pccam600 ptp2 ricoh samsung sierra smal sonix soundvision spca50x sq905 stv0674 stv0680 sx330z template" ELIBC="glibc" INPUT_DEVICES="evdev keyboard mouse void" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en en_GB en_US" USERLAND="GNU" VIDEO_CARDS="fbdev vesa"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

---------------------------------------------------------------
Last edited by Skippy on Tue May 19, 2009 12:56, edited 1 time in total.
Skippy
Simple Hen
 
Posts: 53
Joined: Sat May 05, 2007 0:19
Location: Fort Collins, Colorado

Re: knetworkmanager will not compile

Postby WarraWarra » Sun May 10, 2009 23:30

Likely this will not fix it but have a look or try installing say wpa_suplicant or searching for mac80211 or similar and install then try again as this is all encryption related.

Ps> amd64 and ~amd64 is this not causing some confusion for portage as surely ~amd64 would include stable as well as testing unstable so only need to have ~amd64 .

Any reason why you are not just using equo to do the work for you.
Code: Select all
equo update ; equo install equo spritz entropy layman portage ; layman -S ; equo conf update ; equo libtest ; equo deptest


" equo deptest " will do more or less the same as " revdep-rebuild -iv "
Make sure equo knows what gentoo is doing " equo database --gentoosync "

You should also be on the 4.* branch of equo " equo world --upgrade 4 " or "equo --upgrade 4 " just check for correct wording / options.

Hope this helps.
WarraWarra
Sagely Hen
 
Posts: 1989
Joined: Wed Jan 03, 2007 21:01
Location: 31.324270, -113.585511

Re: knetworkmanager will not compile

Postby Fitzcarraldo » Mon May 11, 2009 0:50

Yep, what WarraWarra said re ACCEPT_KEYWORDS. Also, Judging by your build log location, I assume you are not using Entropy at all? Anyway...

media-sound/vkeybd is a virtual MIDI keyboard for X. Do you use it? If not, uninstall it: emerge -C vkeybd

Also, do you use evolution-exchange (an Evolution module for connecting to Microsoft Exchange Server)? If not, uninstall that too: emerge -C evolution-exchange

What version of networkmanager have you got installed? Try downgrading it to networkmanager-0.6.4_p20070621 if you have a later version, then try merging knetworkmanager again.

The version of knetworkmanager that you are trying to merge builds OK on my laptop (also ~amd64) with the following packages installed:
linux-sabayon-2.6.29
networkmanager-0.6.4_p20070621
glibc-2.8_p20080602-r1
gcc-4.3.3-r2

(I see you have the 2.6.27 kernel installed. You might want to try upgrading your kernel to 2.6.29 at some point too -- see the SL Wiki article on using genkernel to upgrade a kernel.)

Regarding an alternative to networkmanager/knetworkmanager, wicd gets mentioned a lot in these forums. If you use the SL Forum Search facility you'll find several threads with details on how to install it and get it working. Personally I don't have any trouble at all with NetworkManager and KNetworkManager on two laptops running SL (and another one previously running PCLinuxOS 2007 and lately openSUSE 11.1), so I haven't tried wicd myself, but others seem to find it helps if they can't get NetworkManager working.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7981
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: knetworkmanager will not compile

Postby Skippy » Tue May 12, 2009 20:49

Greetings and thanks to you both.

Regarding the keywords, granted that emerge --info says:
ACCEPT_KEYWORDS="amd64 ~amd64"

when I check make.conf it says:
ACCEPT_KEYWORDS="~amd64"

So where might the additional amd64 be coming from?

------------

I did just remove evolution-exchange as you are correct, I don't need that. Easy fix. The vkeybd I don't use, but intend to - maybe. But that is no big deal either way.

------------

regarding knetworkmanager, my installed version is knetworkmanager-0.2.2_p20080528, the same one which will not compile. I also tried installing versions 0.2.1_p20071228 and 0.2.1_pre20071119. they will not compile either.

could this have anything to do with avahi? I'm having a problem there as well:

emerge -av avahi

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild U ] net-dns/avahi-0.6.25 [0.6.24-r2] USE="autoipd* dbus gdbm gtk howl-compat ipv6 mdnsresponder-compat python qt3 qt4 -bookmarks -doc -mono -test" 0 kB

------------ begin compile -----------------

checking for python platform... linux2
checking for python script directory... ${prefix}/lib64/python2.6/site-packages
checking for python extension module directory... ${exec_prefix}/lib64/python2.6/site-packages
checking for python module gtk... no
configure: error: Could not find Python module gtk

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/net-dns/avahi-0.6.25/work/avahi-0.6.25/config.log
*
* ERROR: net-dns/avahi-0.6.25 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3343: Called econf '--localstatedir=/var' '--with-distro=gentoo' '--disable-python-dbus' '--disable-pygtk' '--disable-xmltoman' '--disable-monodoc' '--enable-glib' '--disable-tests' '--enable-autoipd' '--enable-compat-libdns_sd' '--enable-compat-howl' '--disable-doxygen-doc' '--disable-mono' '--enable-dbus' '--enable-python' '--enable-gtk' '--enable-qt3' '--enable-qt4' '--enable-gdbm' '--enable-python-dbus' '--enable-pygtk'
* ebuild.sh, line 534: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/usr/portage/distfiles/emerge-logs/net-dns:avahi-0.6.25:20090512-194546.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-dns/avahi-0.6.25/temp/environment'.
*

>>> Failed to emerge net-dns/avahi-0.6.25, Log file:

--------------

Or is this totally unrelated?

---------------

Finally, why am I using emerge & revdep-rebuild? Because I removed the Sabayon overlay. My attempts to upgrade my system resulted in one disaster after another until I did so. I've used Gentoo for years, so I know - at least to an intermediate level - how emerge and related things work. Obviously I'm not a Master. :)

Thanks much, Skippy
Skippy
Simple Hen
 
Posts: 53
Joined: Sat May 05, 2007 0:19
Location: Fort Collins, Colorado

Re: knetworkmanager will not compile

Postby Fitzcarraldo » Tue May 12, 2009 21:36

My advice would be to re-add the Sabayon Linux overlay, because the ebuilds for NetworkManager and KNetworkManager are different to the ones in the Portage repository, and you may actually have more luck:

Code: Select all
$ eix knetworkmanager
[U] kde-misc/knetworkmanager
     Available versions:  (~)0.2.1_pre20071119 (~)0.2.1_p20071228 (~)0.2.2_p20080528 (~)0.2.2_p20080528[1] (~)0.7.0_p20090205[1] (~)0.7.0_p20090207[1] {arts cisco debug dialup elibc_FreeBSD openvpn pptp xinerama}
     Installed versions:  0.2.2_p20080528[1](23:39:49 25/04/09)(xinerama -arts -cisco -debug -dialup -elibc_FreeBSD -openvpn -pptp)
     Homepage:            http://en.opensuse.org/Projects/KNetworkManager
     Description:         A KDE frontend for NetworkManager

[1] "sabayon" /usr/local/portage/layman/sabayon


You can see from the output of eix above that I have the version of KNetworkManager installed using the Sabayon Linux overlay ebuild version 0.2.2_p20080528. I have to say the Sabayon Linux overlay is normally very solid. You can re-add it as follows (which you probably know if you're a long-time Gentoo user):

Code: Select all
# emerge --sync
# layman -a sabayon
# layman -S
# emerge -1v =knetworkmanager-0.2.2_p20080528


My NetworkManager package is also installed using the Sabayon Linux overlay ebuild:

Code: Select all
$ eix net-misc/networkmanager
[U] net-misc/networkmanager
     Available versions:  (~)0.6.5-r4[1] (~)0.6.5-r5[1] (~)0.6.5-r6[1] *0.6.5_p20070823 0.6.5_p20070823-r1[1] 0.6.5_p20070823-r2[1] 0.6.6 (~)0.6.6-r1[1] (~)0.7.0 (~)0.7.0-r2[1] (~)0.7.0-r3[1] (~)0.7.1-r1 (~)0.7.1-r2 (~)0.7.1-r11[1] {applet avahi connection-sharing crypt debug dhclient dhcpcd doc gnome gnutls modemmanager nss resolvconf}
     Installed versions:  0.6.6-r1[1](23:19:47 25/04/09)(crypt -debug -doc -gnome)
     Homepage:            http://www.gnome.org/projects/NetworkManager/
     Description:         Network configuration and management in an easy way. Desktop environment independent.

[U] net-misc/networkmanager-openvpn
     Available versions:  (~)0.3.2_p20070621 (~)0.7.0 (~)0.7.1 {crypt debug doc gnome}
     Installed versions:  0.3.2_p20070621(17:29:49 31/01/09)(crypt -debug -doc -gnome)
     Homepage:            http://www.gnome.org/projects/NetworkManager/
     Description:         NetworkManager OpenVPN plugin.

* net-misc/networkmanager-pptp
     Available versions:  [M](~)0.1.0_p20070726 [M](~)0.7.0 [M](~)0.7.1 {crypt debug doc gnome}
     Homepage:            http://www.gnome.org/projects/NetworkManager/
     Description:         NetworkManager PPTP plugin.

[U] net-misc/networkmanager-vpnc
     Available versions:  (~)0.6.4_p20070621 (~)0.7.0 (~)0.7.1 {crypt debug doc gnome}
     Installed versions:  0.6.4_p20070621(17:29:49 31/01/09)(crypt -debug -doc -gnome)
     Homepage:            http://www.gnome.org/projects/NetworkManager/
     Description:         NetworkManager VPNC plugin.

[1] "sabayon" /usr/local/portage/layman/sabayon

Found 4 matches.


Also, which version of layman have you got installed? Here's what I have installed:

Code: Select all
$ eix layman
[I] app-portage/layman
     Available versions:  1.1.1 (~)1.2.3 {git subversion test}
     Installed versions:  1.2.3(17:56:17 28/03/09)(-git -subversion -test)
     Homepage:            http://layman.sourceforge.net
     Description:         A python script for retrieving gentoo overlays.


and what are the contents of your layman.cfg file? The storage path was changed somewhere around version 1.2 (see layman -S does not detect linux-sabayon-2.6.26 [Solved]) and should now be as follows (also needs to match the source directory path that is in your /etc/make.conf):

Code: Select all
$ cat /etc/layman/layman.cfg
[MAIN]

#-----------------------------------------------------------
# Defines the directory where overlays should be installed

storage   : /usr/local/portage/layman

#-----------------------------------------------------------
# Remote overlay lists will be stored here
# layman will append _md5(url).xml to each filename

cache     : %(storage)s/cache

#-----------------------------------------------------------
# The list of locally installed overlays

local_list: %(storage)s/overlays.xml

#-----------------------------------------------------------
# Path to the make.conf file that should be modified by
# layman

make_conf : %(storage)s/make.conf

#-----------------------------------------------------------
# URLs of the remote lists of overlays (one per line) or
# local overlay definitions
#
#overlays  : http://www.gentoo.org/proj/en/overlays/layman-global.txt
#            http://dev.gentoo.org/~wrobel/layman/global-overlays.xml
#            http://mydomain.org/my-layman-list.xml
#            file:///usr/portage/local/layman/my-list.xml

overlays  : http://www.gentoo.org/proj/en/overlays/layman-global.txt

#-----------------------------------------------------------
# Proxy support
#
#proxy  : http://[user:pass@]www.my-proxy.org:3128

#-----------------------------------------------------------
# Strict checking of overlay definitions
#
# Set either to "yes" or "no". If "no" layman will issue
# warnings if an overlay definition is missing either
# description or contact information.
#
nocheck  : yes

#-----------------------------------------------------------
# Umask settings
#
# layman should usually work with a umask of 0022. You should
# only change this setting if you are absolutely certain that
# you know what you are doing.
#
#umask  : 0022


If your source path is different to that in the latest version of layman.cfg, if you change it then you need to re-run the sync, so I'd recommend repeating the syncing to make sure the correct directories are populated:

Code: Select all
# layman -d sabayon
# emerge --sync
# layman -a sabayon
# layman -S


I don't think avahi has anything to do with your problem. Anyway, for what it's worth the version installed on my laptop is:

Code: Select all
$ eix net-dns/avahi
[U] net-dns/avahi
     Available versions:  0.6.24-r2 (~)0.6.25 {autoipd bookmarks dbus doc gdbm gtk howl-compat ipv6 kernel_linux mdnsresponder-compat mono python qt3 qt4 test}
     Installed versions:  0.6.24(19:49:21 31/01/09)(dbus gdbm gtk howl-compat ipv6 kernel_linux mdnsresponder-compat python qt3 qt4 -autoipd -bookmarks -doc -mono -test)
     Homepage:            http://avahi.org/
     Description:         System which facilitates service discovery on a local network


As I said earlier, the versions of NetworkManager and KNetworkManager that are installed on my laptop work very well. No complaints at all.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7981
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: knetworkmanager will not compile

Postby Thev00d00 » Thu May 14, 2009 13:50

Knetworkmanager has been replaced by the plasmoid in newer versions and is no longer maintained afaik.

Knetworkmanager needs NM ~ 0.6.6 to complile really. or < 0.7
Image
Please report Bugs on the Bugzilla, not forum
Please Adopt an Unanswered thread
Website / Blog : v00d00.net
twitter: Follow Me
G+: Circle Me
Thev00d00
Generally Awesome (tm)
 
Posts: 1472
Joined: Wed Feb 21, 2007 15:52
Location: United Kingdom

Re: knetworkmanager will not compile [solved]

Postby Skippy » Mon May 18, 2009 14:31

Ha! Fitzcarraldo, you are the man!

----------------------------------------------------------
root $ emerge -av1 knetworkmanager

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild N ] dev-libs/dbus-qt3-0.9 USE="-debug" 442 kB [1]
[ebuild U ] kde-misc/knetworkmanager-0.7.0_p20090207 [0.2.2_p20080528] USE="-arts* -cisco -debug -dialup -openvpn (-pptp) -xinerama*" 1,065 kB [0=>1]

Total: 2 packages (1 upgrade, 1 new), Size of downloads: 1,507 kB
Portage tree and overlays:
[0] /usr/portage
[1] /usr/local/portage/layman/sabayon
-----------------------------------------------------------

That fixed it. Thanks for all that help and pointing me in the right direction. I'm very grateful to you.

Skippy
Skippy
Simple Hen
 
Posts: 53
Joined: Sat May 05, 2007 0:19
Location: Fort Collins, Colorado

Re: knetworkmanager will not compile

Postby Fitzcarraldo » Mon May 18, 2009 15:39

You're welcome. Glad you got it sorted.

Please don't forget to add "[Solved]" to the title of your first post. You can do this by clicking on the EDIT button in your first post and adding it to the title in the title box. Thanks.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7981
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom


Return to Portage|Emerge Package Managers

Who is online

Users browsing this forum: No registered users and 1 guest

cron