Volume

Tutto ciò che è pertinente a Sabayon Linux, indipendentemente dall'architettura e dall'ambiente grafico

Moderator: Moderators

Volume

Postby Neo85 » Sat Sep 16, 2006 10:19

Ciao a tutti sono nuovo

ho scarivcato la live e fatto partire con le impostazioni per xgl. Andava lentissima ma funzionava l'audio. L'ho installata e gli effetti funzionano ma l'audio si ostina non funzionare rimanendo a 0 e se provo con kmix a alzarlo ritorna a 0 inesorabilmente... Inltre mi rimane aperta una bella finestra con stritto volume 0 % al centro dell schermo in modo che non riesco a vedere niente...

Qualcuno ha idee?

Ciao a tutti e grazie (bella l'idea di xgl)
Neo85
Baby Hen
 
Posts: 3
Joined: Sat Sep 16, 2006 8:34

Postby Dark_MaGe » Sat Sep 16, 2006 13:16

probabilmente qualcosa non è andato bene durante l'installazione, la prima cosa da fare è controllare che md5sum sia quello del sito, e seconda cosa da fare verificare i dati scritti sul cd se entrambi vanno bene reinstalla, in ogni caso è sempre utile postare l'output di lspci lsmod e dmesg
Dark_MaGe
Your Farmer
 
Posts: 1699
Joined: Thu Jun 29, 2006 8:19
Location: Catania Italy

Postby Neo85 » Sat Sep 16, 2006 13:58

Dark_MaGe wrote:probabilmente qualcosa non è andato bene durante l'installazione, la prima cosa da fare è controllare che md5sum sia quello del sito, e seconda cosa da fare verificare i dati scritti sul cd se entrambi vanno bene reinstalla, in ogni caso è sempre utile postare l'output di lspci lsmod e dmesg


md5sum e' giusto ora sto scaricando il dvd magari metto a posto le cose... In ogni caso non posso postare niente perche' quella finestra mi rende inutilizzabile il sistema... Spero con il dvd di mettere a posto!

Vi faccio sapere
Neo85
Baby Hen
 
Posts: 3
Joined: Sat Sep 16, 2006 8:34

Postby Dark_MaGe » Sat Sep 16, 2006 15:14

prova a premere ctrl+alt+backspace e così si chiude xorg, dopo di che accedi alla console e controlla i file che ti ho detto, se non riesci neppure a fare quello fai caricare fino al login di kdm, se neppure quello va, fai unboot interattivo e fermati prima del caricamento di kdm
Dark_MaGe
Your Farmer
 
Posts: 1699
Joined: Thu Jun 29, 2006 8:19
Location: Catania Italy

Postby Neo85 » Mon Sep 18, 2006 8:07

Dark_MaGe wrote:probabilmente qualcosa non è andato bene durante l'installazione, la prima cosa da fare è controllare che md5sum sia quello del sito, e seconda cosa da fare verificare i dati scritti sul cd se entrambi vanno bene reinstalla, in ogni caso è sempre utile postare l'output di lspci lsmod e dmesg


localhost simon # lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev
03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 0
3)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) U
SB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) U
SB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) U
SB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Co
ntroller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (re
v 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 0
1)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH
4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Mode
m Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 [Mobility Fi
reGL 9000] (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Eth
ernet (rev 02)
02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
localhost simon # lsmod
Module Size Used by
ipv6 202784 8
snd_seq_dummy 3588 0
snd_seq_oss 26624 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 42832 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 3 snd_seq_dummy,snd_seq_oss,snd_seq
fglrx 385356 41
pcmcia 28076 0
joydev 8128 0
bcm5700 128172 0
intel_agp 18844 1
i8xx_tco 6424 0
snd_intel8x0 26524 1
tg3 88708 0
yenta_socket 21388 4
slamr 431912 0
rsrc_nonstatic 10624 1 yenta_socket
radeonfb 88768 0
i2c_algo_bit 8200 1 radeonfb
i2c_core 15744 2 radeonfb,i2c_algo_bit
snd_intel8x0m 13452 1
snd_ac97_codec 79648 2 snd_intel8x0,snd_intel8x0m
snd_ac97_bus 2816 1 snd_ac97_codec
serio_raw 5764 0
sl811_hcd 10368 0
ohci_hcd 16644 0
uhci_hcd 18440 0
ehci_hcd 24072 0
localhost simon # dmesg
[4294667.296000] Linux version 2.6.17-reiser4-r1-smp ([email protected]) (gcc version
4.1.1 (Gentoo 4.1.1)) #1 SMP Tue Aug 22 08:04:20 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[4294667.296000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001ffae000 (usable)
[4294667.296000] BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved)
[4294667.296000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 130990
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] Normal zone: 126894 pages, LIFO batch:31
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 DELL ) @ 0x00
0fdf00
[4294667.296000] ACPI: RSDT (v001 DELL CPi R 0x27d30c0f ASL 0x00000061) @
0x1fff0000
[4294667.296000] ACPI: FADT (v001 DELL CPi R 0x27d30c0f ASL 0x00000061) @
0x1fff0400
[4294667.296000] ACPI: ASF! (v016 DELL CPi R 0x27d30c0f ASL 0x00000061) @
0x1fff0800
[4294667.296000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @
0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:de
da0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: dolvm2 root=/dev/ram0 ramdisk=8192 real_ro
ot=/dev/VolGroup00/LogVol00 splash=silent,theme:default quiet CONSOLE=/dev/tty1
init=/linuxrc doslowusb vga=791 noapic
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (0140a000)
[4294667.296000] Enabling fast FPU save and restore... done.
[4294667.296000] Enabling unmasked SIMD FPU exception support... done.
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[4294667.296000] Detected 1395.620 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour dummy device 80x25
[4294667.525000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.525000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294667.542000] Memory: 506980k/523960k available (5578k kernel code, 16448k re
served, 2032k data, 480k init, 0k highmem)
[4294667.542000] Checking if this processor honours the WP bit even in superviso
r mode... Ok.
[4294667.602000] Calibrating delay using timer specific routine.. 2792.68 BogoMI
PS (lpj=1396342)
[4294667.602000] Security Framework v1.0.0 initialized
[4294667.602000] SELinux: Initializing.
[4294667.602000] SELinux: Starting in permissive mode
[4294667.602000] selinux_register_security: Registering secondary module capabi
lity
[4294667.602000] Capability LSM initialized as secondary
[4294667.602000] Mount-cache hash table entries: 512
[4294667.602000] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 0
0000000 00000180 00000000 00000000
[4294667.602000] CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00
000000 00000180 00000000 00000000
[4294667.602000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294667.602000] CPU: L2 cache: 1024K
[4294667.602000] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040
00000180 00000000 00000000
[4294667.602000] Intel machine check architecture supported.
[4294667.602000] Intel machine check reporting enabled on CPU#0.
[4294667.602000] Checking 'hlt' instruction... OK.
[4294667.606000] SMP alternatives: switching to UP code
[4294667.606000] Freeing SMP alternatives: 32k freed
[4294667.615000] ACPI: setting ELCR to 0200 (from 0800)
[4294667.617000] CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
[4294667.617000] SMP motherboard not detected.
[4294667.617000] Local APIC not detected. Using dummy APIC emulation.
[4294667.617000] Brought up 1 CPUs
[4294667.617000] migration_cost=0
[4294667.617000] checking if image is initramfs... it is
[4294667.936000] Freeing initrd memory: 3302k freed
[4294667.936000] NET: Registered protocol family 16
[4294667.936000] EISA bus registered
[4294667.936000] ACPI: bus type pci registered
[4294667.953000] PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2
[4294667.953000] Setting up standard PCI resources
[4294667.954000] ACPI: Subsystem revision 20060127
[4294667.966000] ACPI: Interpreter enabled
[4294667.966000] ACPI: Using PIC for interrupt routing
[4294667.967000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294667.967000] PCI: Probing PCI hardware (bus 00)
[4294667.967000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294667.990000] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[4294667.990000] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[4294667.990000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294667.990000] Boot video device is 0000:01:00.0
[4294667.990000] PCI: Transparent bridge - 0000:00:1e.0
[4294667.990000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#
02) (try 'pci=assign-busses')
[4294667.990000] Please report the result to linux-kernel to fix this permanentl
y
[4294667.990000] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#
02) (try 'pci=assign-busses')
[4294667.990000] Please report the result to linux-kernel to fix this permanentl
y
[4294667.990000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.015000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[4294668.015000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[4294668.015000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[4294668.016000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[4294668.016000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 1
5) *0, disabled.
[4294668.016000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[4294668.018000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294668.019000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[4294668.020000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.020000] pnp: PnP ACPI init
[4294668.055000] pnp: PnP ACPI: found 13 devices
[4294668.055000] PnPBIOS: Disabled by ACPI PNP
[4294668.055000] SCSI subsystem initialized
[4294668.055000] usbcore: registered new driver usbfs
[4294668.055000] usbcore: registered new driver hub
[4294668.055000] PCI: Using ACPI for IRQ routing
[4294668.055000] PCI: If a device doesn't work, try "pci=routeirq". If it helps
, post a report
[4294668.061000] TC classifier action (bugs to [email protected] cc [email protected]
berus.ca)
[4294668.067000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[4294668.067000] pnp: 00:02: ioport range 0x800-0x805 could not be reserved
[4294668.067000] pnp: 00:02: ioport range 0x808-0x80f could not be reserved
[4294668.067000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[4294668.067000] pnp: 00:03: ioport range 0x806-0x807 has been reserved
[4294668.067000] pnp: 00:03: ioport range 0x810-0x85f could not be reserved
[4294668.067000] pnp: 00:03: ioport range 0x860-0x87f has been reserved
[4294668.067000] pnp: 00:03: ioport range 0x880-0x8bf has been reserved
[4294668.067000] pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
[4294668.067000] pnp: 00:08: ioport range 0x900-0x97f has been reserved
[4294668.067000] PCI: Bridge: 0000:00:01.0
[4294668.067000] IO window: c000-cfff
[4294668.067000] MEM window: fc000000-fdffffff
[4294668.067000] PREFETCH window: e8000000-efffffff
[4294668.067000] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[4294668.067000] IO window: 0000d000-0000d0ff
[4294668.067000] IO window: 0000d400-0000d4ff
[4294668.067000] PREFETCH window: 30000000-31ffffff
[4294668.067000] MEM window: f6000000-f7ffffff
[4294668.067000] PCI: Bus 7, cardbus bridge: 0000:02:01.1
[4294668.068000] IO window: 0000d800-0000d8ff
[4294668.068000] IO window: 0000dc00-0000dcff
[4294668.068000] PREFETCH window: 32000000-33ffffff
[4294668.068000] MEM window: f8000000-f9ffffff
[4294668.068000] PCI: Bridge: 0000:00:1e.0
[4294668.068000] IO window: d000-efff
[4294668.068000] MEM window: f6000000-fbffffff
[4294668.068000] PREFETCH window: 30000000-33ffffff
[4294668.068000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.068000] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
[4294668.068000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294668.068000] PCI: setting IRQ 11 as level-triggered
[4294668.068000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (l
evel, low) -> IRQ 11
[4294668.068000] PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
[4294668.068000] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (l
evel, low) -> IRQ 11
[4294668.068000] NET: Registered protocol family 2
[4294668.077000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294668.077000] TCP established hash table entries: 16384 (order: 5, 131072 byt
es)
[4294668.077000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[4294668.077000] TCP: Hash tables configured (established 16384 bind 8192)
[4294668.077000] TCP reno registered
[4294668.077000] Machine check exception polling timer started.
[4294668.081000] audit: initializing netlink socket (disabled)
[4294668.081000] audit(1158486751.080:1): initialized
[4294668.081000] Total HugeTLB memory allocated, 0
[4294668.081000] VFS: Disk quotas dquot_6.5.1
[4294668.082000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.082000] Loading Reiser4. See http://www.namesys.com for a description of Reise
r4.
[4294668.082000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[4294668.082000] Coda Kernel/Venus communications, v6.0.0, [email protected]
[4294668.082000] Installing knfsd (copyright (C) 1996 [email protected] ).
[4294668.082000] NTFS driver 2.1.27 [Flags: R/W].
[4294668.082000] QNX4 filesystem 0.2.3 registered.
[4294668.082000] fuse init (API version 7.6)
[4294668.083000] JFS: nTxBlock = 3987, nTxLock = 31903
[4294668.088000] SGI XFS with ACLs, security attributes, realtime, large block n
umbers, no debug enabled
[4294668.088000] SGI XFS Quota Management subsystem
[4294668.088000] SELinux: Registering netfilter hooks
[4294668.095000] Initializing Cryptographic API
[4294668.095000] io scheduler noop registered
[4294668.095000] io scheduler anticipatory registered (default)
[4294668.095000] io scheduler deadline registered
[4294668.095000] io scheduler cfq registered
[4294668.128000] lp: driver loaded but no devices found
[4294668.128000] Real Time Clock Driver v1.12ac
[4294668.129000] toshiba: not a supported Toshiba laptop
[4294668.129000] i8k: unable to get SMM BIOS version
[4294668.129000] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto ([email protected]
ebian.org)
[4294668.133000] ppdev: user-space parallel port driver
[4294668.133000] Linux agpgart interface v0.101 (c) Dave Jones
[4294668.133000] vesafb: framebuffer at 0xe8000000, mapped to 0xe0a80000, using
3072k, total 32704k
[4294668.133000] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[4294668.133000] vesafb: protected mode interface info at c000:57f3
[4294668.133000] vesafb: scrolling: redraw
[4294668.133000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[4294668.192000] Console: switching to colour frame buffer device 128x48
[4294668.194000] fbsplash: console 0 using theme 'default'
[4294668.521000] fbsplash: switched splash state to 'on' on console 0
[4294668.521000] fb0: VESA VGA frame buffer device
[4294668.522000] ACPI: AC Adapter [AC] (on-line)
[4294668.795000] ACPI: Battery Slot [BAT0] (battery present)
[4294668.795000] ACPI: Battery Slot [BAT1] (battery absent)
[4294668.795000] ACPI: Lid Switch [LID]
[4294668.795000] ACPI: Power Button (CM) [PBTN]
[4294668.795000] ACPI: Sleep Button (CM) [SBTN]
[4294668.796000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[4294668.796000] Using specific hotkey driver
[4294668.796000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[4294668.796000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294668.809000] ACPI: Thermal Zone [THM] (49 C)
[4294668.809000] ibm_acpi: ec object not found
[4294668.809000] isapnp: Scanning for PnP cards...
[4294669.121000] isapnp: No Plug & Play device found
[4294669.121000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharin
g disabled
[4294669.121000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.122000] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.123000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[4294669.123000] PCI: setting IRQ 5 as level-triggered
[4294669.123000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (le
vel, low) -> IRQ 5
[4294669.123000] parport: PnPBIOS parport detected.
[4294669.123000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTA
TE,COMPAT,ECP,DMA]
[4294669.206000] lp0: using parport0 (interrupt-driven).
[4294669.206000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 ir
q 1,12
[4294669.209000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.210000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.210000] parport0: cannot grant exclusive access for device parkbd
[4294669.210000] mice: PS/2 mouse device common for all mice
[4294669.210000] ts: Compaq touchscreen protocol output
[4294669.220000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294669.827000] input: DualPoint Stick as /class/input/input1
[4294669.863000] input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input2
[4294672.221000] floppy0: no floppy controllers found
[4294672.221000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blo
cksize
[4294672.221000] loop: loaded (max 8 devices)
[4294672.221000] Compaq SMART2 Driver (v 2.6.0)
[4294672.221000] HP CISS Driver (v 2.6.10)
[4294672.222000] v2.3 : Micro Memory(tm) PCI memory board block driver
[4294672.222000] MM: desc_per_page = 128
[4294672.222000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.222000] ide: Assuming 33MHz system bus speed for PIO modes; override wi
th idebus=xx
[4294672.222000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[4294672.222000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294672.223000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294672.223000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (l
evel, low) -> IRQ 11
[4294672.223000] ICH4: chipset revision 1
[4294672.223000] ICH4: not 100% native mode: will probe irqs later
[4294672.223000] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:
pio
[4294672.223000] ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:
pio
[4294672.223000] Probing IDE interface ide0...
[4294672.487000] hda: HTS548040M9AT00, ATA DISK drive
[4294673.099000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.099000] Probing IDE interface ide1...
[4294673.771000] hdc: HL-DT-STDVD-ROM GDR8082N, ATAPI CD/DVD-ROM drive
[4294674.077000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.078000] hda: max request size: 512KiB
[4294674.097000] hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255
/63, UDMA(100)
[4294674.097000] hda: cache flushes supported
[4294674.097000] hda: hda1 hda2
[4294674.108000] hdc: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
[4294674.108000] Uniform CD-ROM driver Revision: 3.20
[4294674.120000] iscsi: registered transport (tcp)
[4294674.120000] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[4294674.120000] Detecting Adaptec I2O RAID controllers...
[4294674.121000] Adaptec aacraid driver (1.1-5[2409]-mh1)
[4294674.121000] NCR53c406a: no available ports found
[4294674.121000] sym53c416.c: Version 1.0.0-ac
[4294674.121000] qlogicfas: no cards were found, please specify I/O address and
IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[4294674.121000] Emulex LightPulse Fibre Channel SCSI driver 8.1.6
[4294674.121000] Copyright(c) 2004-2006 Emulex. All rights reserved.
[4294674.143000] Failed initialization of WD-7000 SCSI card!
[4294674.143000] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 20
05)
[4294674.143000] megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
[4294674.143000] megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
[4294674.143000] GDT-HA: Storage RAID Controller Driver. Version: 3.04
[4294674.143000] GDT-HA: Found 0 PCI Storage RAID Controllers
[4294674.143000] 3ware Storage Controller device driver for Linux v1.26.02.001.
[4294674.143000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.
007.
[4294674.143000] nsp32: loading...
[4294674.143000] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29
, 2006)
[4294674.143000] libata version 1.20 loaded.
[4294674.144000] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[4294674.144000] osst :I: Tape driver with OnStream support version 0.99.4
[4294674.144000] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[4294674.144000] I2O subsystem v1.325
[4294674.144000] i2o: max drivers = 8
[4294674.144000] I2O Configuration OSM v1.323
[4294674.144000] I2O Bus Adapter OSM v1.317
[4294674.144000] I2O Block Device OSM v1.325
[4294674.144000] I2O SCSI Peripheral OSM v1.316
[4294674.144000] I2O ProcFS OSM v1.316
[4294674.144000] Fusion MPT base driver 3.03.09
[4294674.144000] Copyright (c) 1999-2005 LSI Logic Corporation
[4294674.144000] Fusion MPT SPI Host driver 3.03.09
[4294674.144000] Fusion MPT FC Host driver 3.03.09
[4294674.144000] Fusion MPT SAS Host driver 3.03.09
[4294674.144000] Fusion MPT misc device (ioctl) driver 3.03.09
[4294674.144000] mptctl: Registered with Fusion MPT base driver
[4294674.144000] mptctl: /dev/mptctl @ (major,minor=10,220)
[4294674.144000] Fusion MPT LAN driver 3.03.09
[4294674.144000] ieee1394: Initialized config rom entry `ip1394'
[4294674.144000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294674.144000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294674.144000] usbmon: debugfs is not available
[4294674.144000] usbcore: registered new driver usblp
[4294674.144000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driv
er
[4294674.144000] Initializing USB Mass Storage driver...
[4294674.144000] usbcore: registered new driver usb-storage
[4294674.144000] USB Mass Storage support registered.
[4294674.144000] usbcore: registered new driver libusual
[4294674.145000] usbcore: registered new driver hiddev
[4294674.145000] usbcore: registered new driver usbhid
[4294674.145000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294674.145000] md: linear personality registered for level -1
[4294674.145000] md: raid0 personality registered for level 0
[4294674.145000] md: raid1 personality registered for level 1
[4294674.145000] md: raid10 personality registered for level 10
[4294674.145000] md: raid5 personality registered for level 5
[4294674.145000] md: raid4 personality registered for level 4
[4294674.145000] raid5: automatically using best checksumming function: pIII_sse
[4294674.150000] pIII_sse : 3712.000 MB/sec
[4294674.150000] raid5: using function: pIII_sse (3712.000 MB/sec)
[4294674.167000] raid6: int32x1 449 MB/s
[4294674.184000] raid6: int32x2 550 MB/s
[4294674.201000] raid6: int32x4 457 MB/s
[4294674.218000] raid6: int32x8 382 MB/s
[4294674.235000] raid6: mmxx1 1402 MB/s
[4294674.252000] raid6: mmxx2 1562 MB/s
[4294674.269000] raid6: sse1x1 1027 MB/s
[4294674.286000] raid6: sse1x2 1605 MB/s
[4294674.303000] raid6: sse2x1 1820 MB/s
[4294674.320000] raid6: sse2x2 1910 MB/s
[4294674.320000] raid6: using algorithm sse2x2 (1910 MB/s)
[4294674.320000] md: raid6 personality registered for level 6
[4294674.320000] md: multipath personality registered for level -4
[4294674.320000] md: faulty personality registered for level -5
[4294674.320000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294674.320000] md: bitmap version 4.39
[4294674.320000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected]
edhat.com
[4294674.320000] EISA: Probing bus 0 at eisa.0
[4294674.320000] Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed
Mar 22 10:27:24 2006 UTC).
[4294674.320000] specify port
[4294674.320000] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[4294674.321000] ALSA device list:
[4294674.321000] No soundcards found.
[4294674.321000] TCP bic registered
[4294674.321000] NET: Registered protocol family 1
[4294674.321000] NET: Registered protocol family 17
[4294674.357000] Using IPI No-Shortcut mode
[4294674.357000] ACPI wakeup devices:
[4294674.357000] LID PBTN PCI0 USB0 USB1 USB2 USB3 MODM PCIE
[4294674.357000] ACPI: (supports S0 S1 S3 S4 S5)
[4294674.357000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[4294674.357000] Freeing unused kernel memory: 480k freed
[4294674.607000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[4294674.607000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (l
evel, low) -> IRQ 11
[4294674.607000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294674.607000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294674.608000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus num
ber 1
[4294674.608000] ehci_hcd 0000:00:1d.7: debug port 1
[4294674.608000] PCI: cache line size of 32 is not supported by device 0000:00:1
d.7
[4294674.608000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
[4294674.612000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 De
c 2004
[4294674.612000] usb usb1: configuration #1 chosen from 1 choice
[4294674.612000] hub 1-0:1.0: USB hub found
[4294674.612000] hub 1-0:1.0: 6 ports detected
[4294674.743000] USB Universal Host Controller Interface driver v3.0
[4294674.744000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (l
evel, low) -> IRQ 11
[4294674.744000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294674.744000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294674.744000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus num
ber 2
[4294674.744000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[4294674.744000] usb usb2: configuration #1 chosen from 1 choice
[4294674.744000] hub 2-0:1.0: USB hub found
[4294674.744000] hub 2-0:1.0: 2 ports detected
[4294674.845000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (l
evel, low) -> IRQ 11
[4294674.845000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294674.845000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294674.845000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus num
ber 3
[4294674.845000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[4294674.845000] usb usb3: configuration #1 chosen from 1 choice
[4294674.845000] hub 3-0:1.0: USB hub found
[4294674.845000] hub 3-0:1.0: 2 ports detected
[4294674.946000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294674.946000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (l
evel, low) -> IRQ 11
[4294674.946000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294674.946000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294674.946000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus num
ber 4
[4294674.946000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[4294674.946000] usb usb4: configuration #1 chosen from 1 choice
[4294674.946000] hub 4-0:1.0: USB hub found
[4294674.946000] hub 4-0:1.0: 2 ports detected
[4294675.070000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) D
river (PCI)
[4294675.096000] sl811: driver sl811-hcd, 19 May 2005
[4294706.839000] kjournald starting. Commit interval 5 seconds
[4294706.839000] EXT3-fs: mounted filesystem with ordered data mode.
[4294710.530000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (le
vel, low) -> IRQ 5
[4294710.530000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[4294710.645000] MC'97 1 converters and GPIO not ready (0xff00)
[4294710.989000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (l
evel, low) -> IRQ 11
[4294710.989000] PCI: Unable to reserve mem region #1:[email protected] for devic
e 0000:01:00.0
[4294710.989000] radeonfb (0000:01:00.0): cannot request region 0.
[4294710.989000] radeonfb: probe of 0000:01:00.0 failed with error -16
[4294711.022000] slamr: module license 'Smart Link Ltd.' taints kernel.
[4294711.024000] slamr: SmartLink AMRMO modem.
[4294711.024000] slamr: device 8086:24c6 is grabbed by another driver
[4294711.103000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (l
evel, low) -> IRQ 11
[4294711.103000] Yenta: CardBus bridge found at 0000:02:01.0 [1028:011d]
[4294711.103000] Yenta O2: res at 0x94/0xD4: 00/ea
[4294711.103000] Yenta O2: enabling read prefetch/write burst
[4294711.126000] i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayou
t=0)
[4294711.231000] Yenta: ISA IRQ mask 0x0418, PCI irq 11
[4294711.231000] Socket status: 30000006
[4294711.231000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[4294711.231000] cs: IO port probe 0xd000-0xefff: clean.
[4294711.232000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbfffff
f
[4294711.232000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33fffff
f
[4294711.259000] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (l
evel, low) -> IRQ 11
[4294711.259000] Yenta: CardBus bridge found at 0000:02:01.1 [1028:011d]
[4294711.384000] Yenta: ISA IRQ mask 0x0418, PCI irq 11
[4294711.384000] Socket status: 30000410
[4294711.384000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[4294711.384000] cs: IO port probe 0xd000-0xefff: clean.
[4294711.385000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbfffff
f
[4294711.385000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33fffff
f
[4294711.385000] tg3.c:v3.59 (June 8, 2006)
[4294711.385000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (l
evel, low) -> IRQ 11
[4294711.429000] eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MH
z:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:dd:18:59
[4294711.429000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpe
ed[1] TSOcap[1]
[4294711.429000] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[4294711.439000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (le
vel, low) -> IRQ 5
[4294711.439000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294712.150000] pccard: PCMCIA card inserted into slot 1
[4294712.647000] intel8x0_measure_ac97_clock: measured 198504 usecs
[4294712.647000] intel8x0: clocking to 48000
[4294712.675000] agpgart: Detected an Intel 855PM Chipset.
[4294712.684000] agpgart: AGP aperture is 128M @ 0xe0000000
[4294720.919000] cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0x
fa1fffff 0xfae00000-0xfb3fffff
[4294720.923000] pcmcia: registering new device pcmcia1.0
[4294721.008000] cs: IO port probe 0x100-0x3af: clean.
[4294721.009000] cs: IO port probe 0x3e0-0x4ff: clean.
[4294721.009000] cs: IO port probe 0x820-0x8ff: clean.
[4294721.009000] cs: IO port probe 0xc00-0xcf7: clean.
[4294721.010000] cs: IO port probe 0xa00-0xaff: clean.
[4294721.066000] cs: IO port probe 0x100-0x3af: clean.
[4294721.067000] cs: IO port probe 0x3e0-0x4ff: clean.
[4294721.068000] cs: IO port probe 0x820-0x8ff: clean.
[4294721.068000] cs: IO port probe 0xc00-0xcf7: clean.
[4294721.068000] cs: IO port probe 0xa00-0xaff: clean.
[4294729.549000] EXT3 FS on dm-0, internal journal
[4294729.982000] kjournald starting. Commit interval 5 seconds
[4294729.982000] EXT3 FS on hda1, internal journal
[4294729.982000] EXT3-fs: mounted filesystem with ordered data mode.
[4294730.134000] Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1
extents:1 across:1048568k
[4294739.111000] PM: Writing back config space on device 0000:02:00.0 at offset
b (was 164714e4, writing 81261028)
[4294739.111000] PM: Writing back config space on device 0000:02:00.0 at offset
3 (was 0, writing 4008)
[4294739.111000] PM: Writing back config space on device 0000:02:00.0 at offset
2 (was 2000000, writing 2000002)
[4294739.111000] PM: Writing back config space on device 0000:02:00.0 at offset
1 (was 2b00000, writing 2b00104)
[4294739.111000] PM: Writing back config space on device 0000:02:00.0 at offset
0 (was 164714e4, writing 16a614e4)
[4294741.344000] tg3: eth0: Link is up at 10 Mbps, half duplex.
[4294741.344000] tg3: eth0: Flow control is off for TX and off for RX.
[4294747.417000] fbsplash: console 1 using theme 'default'
[4294747.420000] fbsplash: switched splash state to 'on' on console 1
[4294747.492000] fbsplash: console 2 using theme 'default'
[4294747.495000] fbsplash: switched splash state to 'on' on console 2
[4294747.532000] fbsplash: console 3 using theme 'default'
[4294747.535000] fbsplash: switched splash state to 'on' on console 3
[4294747.548000] fbsplash: console 4 using theme 'default'
[4294747.552000] fbsplash: switched splash state to 'on' on console 4
[4294747.560000] fbsplash: console 5 using theme 'default'
[4294747.564000] fbsplash: switched splash state to 'on' on console 5
[4294747.567000] fbsplash: console 11 using theme 'default'
[4294747.570000] fbsplash: switched splash state to 'on' on console 11
[4294751.123000] [fglrx] Maximum main memory to use for locked dma buffers: 427
MBytes.
[4294751.123000] [fglrx] module loaded - fglrx 8.27.10 [Jul 27 2006] on minor 0
[4294751.164000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (l
evel, low) -> IRQ 11
[4294754.137000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[4294754.137000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[4294754.137000] [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
[4294754.137000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294754.137000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294754.137000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294754.138000] [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
[4294754.150000] [fglrx] total GART = 134217728
[4294754.150000] [fglrx] free GART = 118222848
[4294754.150000] [fglrx] max single GART = 118222848
[4294754.150000] [fglrx] total LFB = 28307456
[4294754.150000] [fglrx] free LFB = 22016000
[4294754.150000] [fglrx] max single LFB = 22016000
[4294754.150000] [fglrx] total Inv = 0
[4294754.150000] [fglrx] free Inv = 0
[4294754.150000] [fglrx] max single Inv = 0
[4294754.150000] [fglrx] total TIM = 0
[4294887.080000] NET: Registered protocol family 10
[4294887.080000] lo: Disabled Privacy Extensions
[4294887.080000] IPv6 over IPv4 tunneling driver
[4294897.643000] eth0: no IPv6 routers present
Neo85
Baby Hen
 
Posts: 3
Joined: Sat Sep 16, 2006 8:34


Return to Sabayon Linux Discussioni Generali

Who is online

Users browsing this forum: No registered users and 1 guest

cron