ONDA N501HS HSDPA Card help

Issues Related to Networking (Wired and Wireless)

Moderator: Moderators

ONDA N501HS HSDPA Card help

Postby linkyone » Tue Nov 06, 2007 2:06

I am running sabayon 3.4f on my HP Pavilion DV1410US laptop. Runs great but I cannot find drivers or any config information on how to install my internet card (onda n501hs). i have read in other forums that i have to blacklist ehci_hcd. Well... i went to /etc/modprobe.d/blacklist and added "blacklist ehci_hcd" and I don't think it worked. I am kinda new to this linux thing but i like what i see already, now only if i can get this card working then ill be on a roll! Any suggestions?
linkyone
Baby Hen
 
Posts: 4
Joined: Thu Nov 01, 2007 14:13

Re: ONDA N501HS HSDPA Card help

Postby linkyone » Tue Nov 06, 2007 2:51

update:

when i run tail -f /var/log/messages and plug in the card i get:

Nov 6 02:48:30 HPLinux [ 212.678519] pccard: CardBus card inserted into slot 0
Nov 6 02:48:30 HPLinux [ 212.678964] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
Nov 6 02:48:30 HPLinux [ 212.678976] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 17
Nov 6 02:48:30 HPLinux [ 212.679000] PCI: Setting latency timer of device 0000:07:00.0 to 64
Nov 6 02:48:30 HPLinux [ 212.679005] ohci_hcd 0000:07:00.0: OHCI Host Controller
Nov 6 02:48:30 HPLinux [ 212.679055] ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
Nov 6 02:48:30 HPLinux [ 212.679079] ohci_hcd 0000:07:00.0: irq 17, io mem 0x38000000
Nov 6 02:48:31 HPLinux [ 213.256328] Device driver usbdev6.1_ep00 lacks bus and class support for being resumed.
Nov 6 02:48:31 HPLinux [ 213.256494] usb usb6: configuration #1 chosen from 1 choice
Nov 6 02:48:31 HPLinux [ 213.256691] hub 6-0:1.0: USB hub found
Nov 6 02:48:31 HPLinux [ 213.256761] hub 6-0:1.0: 1 port detected
Nov 6 02:48:31 HPLinux NetworkManager: <debug> [1194317311.344420] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1131_1561').
Nov 6 02:48:31 HPLinux NetworkManager: <debug> [1194317311.353181] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_07_00_0').
Nov 6 02:48:31 HPLinux NetworkManager: <debug> [1194317311.431584] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial').
Nov 6 02:48:31 HPLinux [ 213.408485] Device driver usbdev6.1_ep81 lacks bus and class support for being resumed.
Nov 6 02:48:31 HPLinux [ 213.409454] PCI: Enabling device 0000:07:00.1 (0000 -> 0002)
Nov 6 02:48:31 HPLinux [ 213.409467] ACPI: PCI Interrupt 0000:07:00.1[A] -> GSI 20 (level, low) -> IRQ 17
Nov 6 02:48:31 HPLinux [ 213.409636] PCI: Setting latency timer of device 0000:07:00.1 to 64
Nov 6 02:48:31 HPLinux [ 213.409642] ohci_hcd 0000:07:00.1: OHCI Host Controller
Nov 6 02:48:31 HPLinux [ 213.409928] ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7
Nov 6 02:48:31 HPLinux [ 213.410031] ohci_hcd 0000:07:00.1: irq 17, io mem 0x38001000
Nov 6 02:48:31 HPLinux NetworkManager: <debug> [1194317311.870186] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_07_00_0_usbraw').
Nov 6 02:48:32 HPLinux [ 213.977916] Device driver usbdev7.1_ep00 lacks bus and class support for being resumed.
Nov 6 02:48:32 HPLinux [ 213.978005] usb usb7: configuration #1 chosen from 1 choice
Nov 6 02:48:32 HPLinux [ 213.978153] hub 7-0:1.0: USB hub found
Nov 6 02:48:32 HPLinux [ 213.978169] hub 7-0:1.0: 1 port detected
Nov 6 02:48:32 HPLinux NetworkManager: <debug> [1194317312.448819] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1131_1561_0').
Nov 6 02:48:32 HPLinux NetworkManager: <debug> [1194317312.458595] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_07_00_1').
Nov 6 02:48:32 HPLinux NetworkManager: <debug> [1194317312.537030] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial_0').
Nov 6 02:48:32 HPLinux [ 214.164315] Device driver usbdev7.1_ep81 lacks bus and class support for being resumed.
Nov 6 02:48:32 HPLinux [ 214.171608] PCI: Enabling device 0000:07:00.2 (0000 -> 0002)
Nov 6 02:48:32 HPLinux [ 214.171622] ACPI: PCI Interrupt 0000:07:00.2[A] -> GSI 20 (level, low) -> IRQ 17
Nov 6 02:48:32 HPLinux [ 214.171848] PCI: Setting latency timer of device 0000:07:00.2 to 64
Nov 6 02:48:32 HPLinux [ 214.171854] ehci_hcd 0000:07:00.2: EHCI Host Controller
Nov 6 02:48:32 HPLinux [ 214.172128] ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 8
Nov 6 02:48:32 HPLinux [ 214.192814] ehci_hcd 0000:07:00.2: irq 17, io mem 0x38002000
Nov 6 02:48:32 HPLinux [ 214.192833] ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 6 02:48:32 HPLinux [ 214.192976] Device driver usbdev8.1_ep00 lacks bus and class support for being resumed.
Nov 6 02:48:32 HPLinux [ 214.192988] usb usb8: configuration #1 chosen from 1 choice
Nov 6 02:48:32 HPLinux [ 214.193022] hub 8-0:1.0: USB hub found
Nov 6 02:48:32 HPLinux [ 214.193032] hub 8-0:1.0: 2 ports detected
Nov 6 02:48:32 HPLinux NetworkManager: <debug> [1194317312.952616] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_07_00_1_usbraw').
Nov 6 02:48:33 HPLinux NetworkManager: <debug> [1194317313.017041] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1131_1562').
Nov 6 02:48:33 HPLinux NetworkManager: <debug> [1194317313.027085] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_07_00_2').
Nov 6 02:48:33 HPLinux [ 214.293781] Device driver usbdev8.1_ep81 lacks bus and class support for being resumed.
Nov 6 02:48:33 HPLinux NetworkManager: <debug> [1194317313.120401] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_07_00_2_if0').
Nov 6 02:48:33 HPLinux NetworkManager: <debug> [1194317313.133636] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_0_0_0000_07_00_2_usbraw').
Nov 6 02:48:36 HPLinux [ 214.521521] hub 8-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Nov 6 02:48:37 HPLinux [ 214.587954] hub 8-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Nov 6 02:48:38 HPLinux [ 214.654619] hub 8-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Nov 6 02:48:39 HPLinux [ 214.719775] hub 8-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
linkyone
Baby Hen
 
Posts: 4
Joined: Thu Nov 01, 2007 14:13

Re: ONDA N501HS HSDPA Card help

Postby WarraWarra » Thu Nov 08, 2007 8:44

Just posted a 3g / hsdpa topic in networking that could help. I do not have any of this hardware so can not give a propper yes / no about it but it could help you get started.

Someone else posted a few months ago about their hsdpa and using kppp or similar to get it working in the forums.

Hope this helps.
WarraWarra
Sagely Hen
 
Posts: 1989
Joined: Wed Jan 03, 2007 21:01
Location: 31.324270, -113.585511


Return to Networking and Wireless

Who is online

Users browsing this forum: No registered users and 0 guests

cron