audio senza cuffie funziona appena inserisco le cuffie nient

Tutto ciò che è pertinente a Sabayon Linux, indipendentemente dall'architettura e dall'ambiente grafico

Moderator: Moderators

audio senza cuffie funziona appena inserisco le cuffie nient

Postby marzola » Mon Aug 28, 2006 18:11

salve, ho questo strano prob, ho un portatile asus con intel pentium m dothan, allora l'audio funziona finc'e non inserisco le cuffie, nel momento in cui vado ad inserire le cuffie non si sente assolutamente nulla appena le scollego l'audio riprende a funzionare correttamente tramite le casse integrate del portatile.

ps. il connettore jack del portatile fa sia da jack quindi uscita analogica, che uscita ottica tutto nello stesso jack.
marzola
Simple Hen
 
Posts: 60
Joined: Mon Aug 21, 2006 1:48

Postby Dark_MaGe » Tue Aug 29, 2006 10:20

controlla negli switch di kmix ci dovrebbe essere l'impostazione per abilitare solo l'uscita analogica
Dark_MaGe
Your Farmer
 
Posts: 1699
Joined: Thu Jun 29, 2006 8:19
Location: Catania Italy

Postby marzola » Tue Aug 29, 2006 13:45

controllato ma non cambia assolutamente nulla qualsiasi impostazione provo.
marzola
Simple Hen
 
Posts: 60
Joined: Mon Aug 21, 2006 1:48

Postby marzola » Tue Aug 29, 2006 14:15

cosa significa questo? eseguendo un alsarestart

sabayonx86 incomplete # /etc/init.d/alsasound restart
* Storing ALSA Mixer Levels ... [ ok ]
* Unloading ALSA ... [ ok ]
* Unloading ALSA modules ... [ ok ]
* Loading ALSA modules ...
* Could not detect custom ALSA settings. Loading all detected alsa drivers.
marzola
Simple Hen
 
Posts: 60
Joined: Mon Aug 21, 2006 1:48

Postby lxnay » Tue Aug 29, 2006 14:36

secondo me il problema sta nello spinotto.
Ricordo i tempi dei mitici walkman e delle uscite mono... :)
Image
Join us on IRC (chat.freenode.net #sabayon or WebChat)
Submit bugs to our Bug Tracker
Follow me on Twitter
Add me on Facebook
Add me on Google+
lxnay
Land Owner
 
Posts: 3595
Joined: Thu Oct 13, 2005 23:16
Location: Italy

Postby marzola » Tue Aug 29, 2006 14:51

senza offesa x carita non e mia intenzione, xo secondo me te quando non sai cosa dire dai la colpa all'hw, ti assicuro che con debian funziona alla perfezione e con windows idem.

quindi che sia un problema addirittura dello spinotto e come dire che io sono babbo natale.

trovo la tua distro stupenda e x questo sto cercando in tutti i modi di risolvere certi problemi, che secondo me sono dovuti alla giovinezza del progetto, ad es. non riesco in nessun modo a gestire il pentium m sta sempre a palla con le freq, l'audio con le casse integrate del portatile va appena collego le cuffie non si sente nulla, e le cuffie funzionano xche le ho provate sullo stereo, alle volte quando avvio il portatile non mi viene rilevato il wireless, proprio non viene rilevata la scheda anche avendo copiato i firmware che mi avevi in precedenza consigliato, se riavvio di nuovo la volta successiva viene normalmente rilevata.

xo non dire che sono prob hw non e vero se lo fossero andrebbe male anche con una debian o con una knoppix mentre con queste ultime va benissimo tutto, ti dico che ho lasciato il portatile accesso x ben 3 mesi senza batteria collegato alla rete elettrica con una debian con il quale facevo di tutto e non si e mai piantato nulla.

ripeto grande progetto il tuo complimenti davvero, dico solo che ci sono alcune cose da sistemare tutto qui e visto che non voglio abbandonare questa distro chiedo aiuto x risolvere questi fstidiosi prob, non tanto x l'audio ma sopratutto x la cpu che ha la ventola sempre al max!
marzola
Simple Hen
 
Posts: 60
Joined: Mon Aug 21, 2006 1:48

Postby lxnay » Tue Aug 29, 2006 16:58

E' da 10 anni che ficco il naso nel settore dell'hardware quindi, quando dico che è un problema hw, probabilmente potrebbe esserlo, per essere chiari, "probabilmente" != "è".

Non per dire, ma quando vai dal dottore dici semplicemente "sto male" o ad esempio "mi fa male la spalla" ? Se applichi il concetto a questo mondo. Quando hai un problema, cerca di postare almeno un:
Code: Select all
dmesg
lspci

Forse, in questo modo, qualcuno potrebbe aiutarti un po' di più :?:

Per il resto, noto una certa vena polemica che preferisco ignorare (ricorda la differenza fra "è"/"e'" o "e" - altrimenti non capisco un piffero, passami il termine).
Image
Join us on IRC (chat.freenode.net #sabayon or WebChat)
Submit bugs to our Bug Tracker
Follow me on Twitter
Add me on Facebook
Add me on Google+
lxnay
Land Owner
 
Posts: 3595
Joined: Thu Oct 13, 2005 23:16
Location: Italy

Postby marzola » Tue Aug 29, 2006 17:38

mi sembra che hai la coda di paglia o sbaglio? :D

se ti sembra che ho dei toni polemici e ti da fastidio non rispondermi, che ti devo dire, io ho semplicemente detto che io ho dei problema con la tua distro non ho detto tutti hanno dei problemi, non uso gli accenti xche questo e il risultato di quando provo ad usare un accento:

��������+

che roba e???

[4294667.296000] Linux version 2.6.17-reiser4-r1-smp ([email protected]) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Tue Aug 22 08:04:20 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[4294667.296000] BIOS-e820: 000000003ffc0000 - 000000003ffcf000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003ffcf000 - 0000000040000000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000ff780
[4294667.296000] On node 0 totalpages: 262080
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32704 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f69a0
[4294667.296000] ACPI: RSDT (v001 A M I OEMRSDT 0x05000519 MSFT 0x00000097) @ 0x3ffc0000
[4294667.296000] ACPI: FADT (v002 A M I OEMFACP 0x05000519 MSFT 0x00000097) @ 0x3ffc0200
[4294667.296000] ACPI: MADT (v001 A M I OEMAPIC 0x05000519 MSFT 0x00000097) @ 0x3ffc0390
[4294667.296000] ACPI: MCFG (v001 A M I OEMMCFG 0x05000519 MSFT 0x00000097) @ 0x3ffc03f0
[4294667.296000] ACPI: OEMB (v001 A M I AMI_OEM 0x05000519 MSFT 0x00000097) @ 0x3ffcf040
[4294667.296000] ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x02002026) @ 0x3ffc8d90
[4294667.296000] ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bed14000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: dolvm2 root=/dev/ram0 ramdisk=8192 real_root=/dev/hda5 splash=silent,theme:default quiet CONSOLE=/dev/tty1 init=/linuxrc doslowusb vga=791
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Enabling fast FPU save and restore... done.
[4294667.296000] Enabling unmasked SIMD FPU exception support... done.
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[4294667.296000] Detected 1862.263 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour dummy device 80x25
[4294669.817000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294669.817000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.842000] Memory: 1026648k/1048320k available (5578k kernel code, 20940k reserved, 2032k data, 480k init, 130816k highmem)
[4294669.842000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.902000] Calibrating delay using timer specific routine.. 3726.91 BogoMIPS (lpj=1863458)
[4294669.902000] Security Framework v1.0.0 initialized
[4294669.902000] SELinux: Initializing.
[4294669.902000] SELinux: Starting in permissive mode
[4294669.902000] selinux_register_security: Registering secondary module capability
[4294669.902000] Capability LSM initialized as secondary
[4294669.902000] Mount-cache hash table entries: 512
[4294669.902000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[4294669.902000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[4294669.902000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294669.902000] CPU: L2 cache: 2048K
[4294669.902000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[4294669.902000] Intel machine check architecture supported.
[4294669.902000] Intel machine check reporting enabled on CPU#0.
[4294669.902000] Checking 'hlt' instruction... OK.
[4294669.906000] SMP alternatives: switching to UP code
[4294669.906000] Freeing SMP alternatives: 32k freed
[4294669.922000] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[4294669.922000] Total of 1 processors activated (3726.91 BogoMIPS).
[4294669.922000] ENABLING IO-APIC IRQs
[4294669.922000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294670.053000] Brought up 1 CPUs
[4294670.053000] migration_cost=0
[4294670.053000] checking if image is initramfs... it is
[4294670.250000] Freeing initrd memory: 3302k freed
[4294670.250000] NET: Registered protocol family 16
[4294670.250000] EISA bus registered
[4294670.250000] ACPI: bus type pci registered
[4294670.250000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[4294670.250000] PCI: Not using MMCONFIG.
[4294670.250000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[4294670.250000] Setting up standard PCI resources
[4294670.250000] ACPI: Subsystem revision 20060127
[4294670.387000] ACPI: Interpreter enabled
[4294670.387000] ACPI: Using IOAPIC for interrupt routing
[4294670.388000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.388000] PCI: Probing PCI hardware (bus 00)
[4294670.390000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[4294670.390000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[4294670.390000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294670.390000] Boot video device is 0000:03:00.0
[4294670.391000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.391000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.395000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[4294670.399000] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
[4294670.402000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[4294670.402000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[4294670.403000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
[4294670.403000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
[4294670.404000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
[4294670.404000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
[4294670.404000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[4294670.405000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
[4294670.405000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
[4294670.405000] ACPI: Power Resource [GFAN] (off)
[4294670.405000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.405000] pnp: PnP ACPI init
[4294670.410000] pnp: PnP ACPI: found 14 devices
[4294670.410000] PnPBIOS: Disabled by ACPI PNP
[4294670.410000] SCSI subsystem initialized
[4294670.410000] usbcore: registered new driver usbfs
[4294670.410000] usbcore: registered new driver hub
[4294670.410000] PCI: Using ACPI for IRQ routing
[4294670.410000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.417000] TC classifier action (bugs to [email protected] cc [email protected])
[4294670.418000] pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
[4294670.418000] PCI: Bridge: 0000:00:01.0
[4294670.418000] IO window: b000-dfff
[4294670.418000] MEM window: fea00000-feafffff
[4294670.418000] PREFETCH window: cff00000-dfefffff
[4294670.418000] PCI: Bus 2, cardbus bridge: 0000:01:01.0
[4294670.419000] IO window: 0000a000-0000a0ff
[4294670.419000] IO window: 0000a400-0000a4ff
[4294670.419000] PREFETCH window: 50000000-51ffffff
[4294670.419000] MEM window: 54000000-55ffffff
[4294670.419000] PCI: Bridge: 0000:00:1e.0
[4294670.419000] IO window: a000-afff
[4294670.419000] MEM window: fe900000-fe9fffff
[4294670.419000] PREFETCH window: 50000000-52ffffff
[4294670.419000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294670.419000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294670.419000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.419000] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294670.419000] NET: Registered protocol family 2
[4294670.429000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.429000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[4294670.430000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[4294670.431000] TCP: Hash tables configured (established 131072 bind 65536)
[4294670.431000] TCP reno registered
[4294670.431000] Machine check exception polling timer started.
[4294670.434000] audit: initializing netlink socket (disabled)
[4294670.434000] audit(1156862251.433:1): initialized
[4294670.434000] highmem bounce pool size: 64 pages
[4294670.434000] Total HugeTLB memory allocated, 0
[4294670.434000] VFS: Disk quotas dquot_6.5.1
[4294670.434000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.434000] Loading Reiser4. See http://www.namesys.com for a description of Reiser4.
[4294670.434000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[4294670.434000] Coda Kernel/Venus communications, v6.0.0, [email protected]
[4294670.435000] Installing knfsd (copyright (C) 1996 [email protected]).
[4294670.435000] NTFS driver 2.1.27 [Flags: R/W].
[4294670.435000] QNX4 filesystem 0.2.3 registered.
[4294670.435000] fuse init (API version 7.6)
[4294670.435000] JFS: nTxBlock = 8049, nTxLock = 64395
[4294670.441000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[4294670.441000] SGI XFS Quota Management subsystem
[4294670.441000] SELinux: Registering netfilter hooks
[4294670.448000] Initializing Cryptographic API
[4294670.448000] io scheduler noop registered
[4294670.448000] io scheduler anticipatory registered (default)
[4294670.448000] io scheduler deadline registered
[4294670.448000] io scheduler cfq registered
[4294670.449000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294670.449000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294670.449000] assign_interrupt_mode Found MSI capability
[4294670.449000] Allocate Port Service[0000:00:01.0:pcie00]
[4294670.471000] lp: driver loaded but no devices found
[4294670.471000] Real Time Clock Driver v1.12ac
[4294670.471000] toshiba: not a supported Toshiba laptop
[4294670.474000] ppdev: user-space parallel port driver
[4294670.474000] Linux agpgart interface v0.101 (c) Dave Jones
[4294670.475000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 3072k, total 16384k
[4294670.475000] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[4294670.475000] vesafb: protected mode interface info at c000:ae28
[4294670.475000] vesafb: scrolling: redraw
[4294670.475000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[4294670.517000] Console: switching to colour frame buffer device 128x48
[4294670.519000] fbsplash: console 0 using theme 'default'
[4294670.723000] fbsplash: switched splash state to 'on' on console 0
[4294670.723000] fb0: VESA VGA frame buffer device
[4294670.723000] ACPI: AC Adapter [AC0] (on-line)
[4294670.723000] ACPI: Battery Slot [BAT0] (battery absent)
[4294670.723000] ACPI: Power Button (FF) [PWRF]
[4294670.723000] ACPI: Lid Switch [LID]
[4294670.723000] ACPI: Sleep Button (CM) [SLPB]
[4294670.723000] ACPI: Fan [FN00] (off)
[4294670.724000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[4294670.724000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[4294670.724000] Using specific hotkey driver
[4294670.724000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294670.724000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294670.764000] ACPI: Thermal Zone [THRM] (60 C)
[4294670.764000] Asus Laptop ACPI Extras version 0.29
[4294670.764000] no string returned by INIT
[4294670.764000] trying default values, supply the developers with your DSDT
[4294670.764000] ibm_acpi: ec object not found
[4294670.764000] isapnp: Scanning for PnP cards...
[4294671.077000] isapnp: No Plug & Play device found
[4294671.077000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[4294671.077000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.078000] parport: PnPBIOS parport detected.
[4294671.078000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[4294671.312000] lp0: using parport0 (interrupt-driven).
[4294671.312000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[4294671.314000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294671.315000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294671.315000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294671.315000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294671.315000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294671.316000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.316000] parport0: cannot grant exclusive access for device parkbd
[4294671.316000] mice: PS/2 mouse device common for all mice
[4294671.316000] ts: Compaq touchscreen protocol output
[4294671.475000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.149000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[4294672.188000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[4294674.374000] floppy0: no floppy controllers found
[4294674.374000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[4294674.374000] loop: loaded (max 8 devices)
[4294674.374000] Compaq SMART2 Driver (v 2.6.0)
[4294674.374000] HP CISS Driver (v 2.6.10)
[4294674.374000] v2.3 : Micro Memory(tm) PCI memory board block driver
[4294674.374000] MM: desc_per_page = 128
[4294674.375000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294674.375000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294674.375000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[4294674.375000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[4294674.375000] ICH6: chipset revision 4
[4294674.375000] ICH6: not 100% native mode: will probe irqs later
[4294674.375000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[4294674.375000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[4294674.375000] Probing IDE interface ide0...
[4294675.006000] hda: HTS541080G9AT00, ATA DISK drive
[4294675.926000] hdb: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
[4294676.022000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294676.022000] Probing IDE interface ide1...
[4294677.205000] Probing IDE interface ide1...
[4294678.376000] hda: max request size: 512KiB
[4294678.394000] hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
[4294678.394000] hda: cache flushes supported
[4294678.394000] hda: hda1 hda2 < hda5 hda6 >
[4294678.459000] hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294678.459000] Uniform CD-ROM driver Revision: 3.20
[4294678.463000] iscsi: registered transport (tcp)
[4294678.463000] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[4294678.463000] Detecting Adaptec I2O RAID controllers...
[4294678.464000] Adaptec aacraid driver (1.1-5[2409]-mh1)
[4294678.464000] NCR53c406a: no available ports found
[4294678.464000] sym53c416.c: Version 1.0.0-ac
[4294678.464000] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[4294678.464000] Emulex LightPulse Fibre Channel SCSI driver 8.1.6
[4294678.464000] Copyright(c) 2004-2006 Emulex. All rights reserved.
[4294678.633000] Failed initialization of WD-7000 SCSI card!
[4294678.633000] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
[4294678.633000] megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
[4294678.633000] megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
[4294678.633000] GDT-HA: Storage RAID Controller Driver. Version: 3.04
[4294678.633000] GDT-HA: Found 0 PCI Storage RAID Controllers
[4294678.633000] 3ware Storage Controller device driver for Linux v1.26.02.001.
[4294678.633000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[4294678.633000] nsp32: loading...
[4294678.633000] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[4294678.633000] libata version 1.20 loaded.
[4294678.633000] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[4294678.633000] osst :I: Tape driver with OnStream support version 0.99.4
[4294678.633000] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[4294678.633000] I2O subsystem v1.325
[4294678.633000] i2o: max drivers = 8
[4294678.634000] I2O Configuration OSM v1.323
[4294678.634000] I2O Bus Adapter OSM v1.317
[4294678.634000] I2O Block Device OSM v1.325
[4294678.634000] I2O SCSI Peripheral OSM v1.316
[4294678.634000] I2O ProcFS OSM v1.316
[4294678.634000] Fusion MPT base driver 3.03.09
[4294678.634000] Copyright (c) 1999-2005 LSI Logic Corporation
[4294678.634000] Fusion MPT SPI Host driver 3.03.09
[4294678.634000] Fusion MPT FC Host driver 3.03.09
[4294678.634000] Fusion MPT SAS Host driver 3.03.09
[4294678.634000] Fusion MPT misc device (ioctl) driver 3.03.09
[4294678.634000] mptctl: Registered with Fusion MPT base driver
[4294678.634000] mptctl: /dev/mptctl @ (major,minor=10,220)
[4294678.634000] Fusion MPT LAN driver 3.03.09
[4294678.634000] ieee1394: Initialized config rom entry `ip1394'
[4294678.634000] ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 18 (level, low) -> IRQ 18
[4294678.687000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[fe9fe000-fe9fe7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[4294678.694000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294678.694000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294678.694000] usbmon: debugfs is not available
[4294678.694000] usbcore: registered new driver usblp
[4294678.694000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[4294678.694000] Initializing USB Mass Storage driver...
[4294678.694000] usbcore: registered new driver usb-storage
[4294678.694000] USB Mass Storage support registered.
[4294678.694000] usbcore: registered new driver libusual
[4294678.694000] usbcore: registered new driver hiddev
[4294678.694000] usbcore: registered new driver usbhid
[4294678.694000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294678.694000] md: linear personality registered for level -1
[4294678.694000] md: raid0 personality registered for level 0
[4294678.694000] md: raid1 personality registered for level 1
[4294678.694000] md: raid10 personality registered for level 10
[4294678.694000] md: raid5 personality registered for level 5
[4294678.694000] md: raid4 personality registered for level 4
[4294678.694000] raid5: automatically using best checksumming function: pIII_sse
[4294678.699000] pIII_sse : 4960.000 MB/sec
[4294678.699000] raid5: using function: pIII_sse (4960.000 MB/sec)
[4294678.716000] raid6: int32x1 601 MB/s
[4294678.733000] raid6: int32x2 714 MB/s
[4294678.750000] raid6: int32x4 601 MB/s
[4294678.767000] raid6: int32x8 507 MB/s
[4294678.784000] raid6: mmxx1 1855 MB/s
[4294678.801000] raid6: mmxx2 2031 MB/s
[4294678.818000] raid6: sse1x1 1367 MB/s
[4294678.835000] raid6: sse1x2 2109 MB/s
[4294678.852000] raid6: sse2x1 2437 MB/s
[4294678.869000] raid6: sse2x2 2503 MB/s
[4294678.869000] raid6: using algorithm sse2x2 (2503 MB/s)
[4294678.869000] md: raid6 personality registered for level 6
[4294678.869000] md: multipath personality registered for level -4
[4294678.869000] md: faulty personality registered for level -5
[4294678.869000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294678.869000] md: bitmap version 4.39
[4294678.869000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected]
[4294678.869000] EISA: Probing bus 0 at eisa.0
[4294678.869000] Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
[4294678.869000] specify port
[4294678.869000] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[4294678.869000] ALSA device list:
[4294678.869000] No soundcards found.
[4294678.869000] TCP bic registered
[4294678.869000] NET: Registered protocol family 1
[4294678.869000] NET: Registered protocol family 17
[4294678.870000] Using IPI No-Shortcut mode
[4294678.870000] ACPI wakeup devices:
[4294678.870000] P0P1 CBS0 P394 CRD0 CRD1 MPCI TVTU LAN0 USB1 USB2 USB3 USB4 EUSB MC97 AZAL SLPB
[4294678.870000] ACPI: (supports S0 S3 S4 S5)
[4294678.870000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[4294678.870000] Freeing unused kernel memory: 480k freed
[4294679.092000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[4294679.092000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294679.092000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294679.092000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[4294679.093000] ehci_hcd 0000:00:1d.7: debug port 1
[4294679.093000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294679.093000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
[4294679.096000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294679.096000] usb usb1: configuration #1 chosen from 1 choice
[4294679.097000] hub 1-0:1.0: USB hub found
[4294679.097000] hub 1-0:1.0: 8 ports detected
[4294679.272000] USB Universal Host Controller Interface driver v3.0
[4294679.272000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[4294679.272000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294679.272000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294679.272000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[4294679.272000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[4294679.272000] usb usb2: configuration #1 chosen from 1 choice
[4294679.272000] hub 2-0:1.0: USB hub found
[4294679.272000] hub 2-0:1.0: 2 ports detected
[4294679.382000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[4294679.382000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294679.382000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294679.382000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[4294679.382000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[4294679.382000] usb usb3: configuration #1 chosen from 1 choice
[4294679.382000] hub 3-0:1.0: USB hub found
[4294679.382000] hub 3-0:1.0: 2 ports detected
[4294679.522000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[4294679.522000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294679.522000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294679.522000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[4294679.522000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[4294679.522000] usb usb4: configuration #1 chosen from 1 choice
[4294679.522000] hub 4-0:1.0: USB hub found
[4294679.522000] hub 4-0:1.0: 2 ports detected
[4294679.649000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[4294679.649000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294679.649000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294679.649000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[4294679.649000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[4294679.649000] usb usb5: configuration #1 chosen from 1 choice
[4294679.649000] hub 5-0:1.0: USB hub found
[4294679.649000] hub 5-0:1.0: 2 ports detected
[4294679.785000] usb 1-5: new high speed USB device using ehci_hcd and address 3
[4294679.786000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294679.807000] sl811: driver sl811-hcd, 19 May 2005
[4294679.987000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003311958]
[4294679.991000] usb 1-5: configuration #1 chosen from 1 choice
[4294680.304000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[4294680.548000] usb 3-2: configuration #1 chosen from 1 choice
[4294680.554000] hub 3-2:1.0: USB hub found
[4294680.556000] hub 3-2:1.0: 2 ports detected
[4294680.943000] usb 3-2.1: new low speed USB device using uhci_hcd and address 3
[4294681.079000] usb 3-2.1: configuration #1 chosen from 1 choice
[4294681.106000] input: Logitech USB Receiver as /class/input/input2
[4294681.106000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2.1
[4294681.165000] input: Logitech USB Receiver as /class/input/input3
[4294681.165000] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2.1
[4294711.615000] ReiserFS: hda5: found reiserfs format "3.6" with standard journal
[4294712.781000] ReiserFS: hda5: using ordered data mode
[4294712.797000] ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294712.798000] ReiserFS: hda5: checking transaction log (hda5)
[4294712.857000] ReiserFS: hda5: Using r5 hash to sort names
[4294716.081000] sdhci: Secure Digital Host Controller Interface driver, 0.11
[4294716.081000] sdhci: Copyright(c) Pierre Ossman
[4294716.081000] ACPI: PCI Interrupt 0000:01:01.2[C] -> GSI 19 (level, low) -> IRQ 20
[4294716.181000] mmc0: SDHCI at 0xfe9fe800 irq 20 PIO
[4294716.246000] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294716.246000] Yenta: CardBus bridge found at 0000:01:01.0 [1043:1177]
[4294716.247000] ieee80211_crypt: registered algorithm 'NULL'
[4294716.259000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294716.259000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
[4294716.273000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1
[4294716.273000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4294716.813000] Yenta: ISA IRQ mask 0x0438, PCI irq 17
[4294716.813000] Socket status: 30000006
[4294716.813000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[4294716.813000] cs: IO port probe 0xa000-0xafff: clean.
[4294716.813000] pcmcia: parent PCI bridge Memory window: 0xfe900000 - 0xfe9fffff
[4294716.813000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x52ffffff
[4294717.288000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 21
[4294717.288000] skge 1.5 addr 0xfe9f8000 irq 21 chip Yukon-Lite rev 9
[4294717.289000] skge eth0: addr 00:11:d8:f2:33:d2
[4294717.289000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 22
[4294717.289000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294717.293000] agpgart: Detected an Intel 915GM Chipset.
[4294717.310000] agpgart: AGP aperture is 256M @ 0x0
[4294726.809000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[4294726.811000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294726.811000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294730.100000] cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f
[4294730.101000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7
[4294730.102000] cs: IO port probe 0x820-0x8ff: clean.
[4294730.102000] cs: IO port probe 0xc00-0xcf7: clean.
[4294730.103000] cs: IO port probe 0xa00-0xaff: clean.
[4294738.102000] Unable to find swap-space signature
[4294744.557000] skge eth0: enabling interface
[4294754.010000] fbsplash: console 1 using theme 'default'
[4294754.012000] fbsplash: switched splash state to 'on' on console 1
[4294754.063000] fbsplash: console 2 using theme 'default'
[4294754.066000] fbsplash: switched splash state to 'on' on console 2
[4294754.117000] fbsplash: console 3 using theme 'default'
[4294754.119000] fbsplash: switched splash state to 'on' on console 3
[4294754.170000] fbsplash: console 4 using theme 'default'
[4294754.173000] fbsplash: switched splash state to 'on' on console 4
[4294754.247000] fbsplash: console 5 using theme 'default'
[4294754.250000] fbsplash: switched splash state to 'on' on console 5
[4294754.252000] fbsplash: console 11 using theme 'default'
[4294754.255000] fbsplash: switched splash state to 'on' on console 11
[4294757.773000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[4294757.774000] [fglrx] Maximum main memory to use for locked dma buffers: 924 MBytes.
[4294757.774000] [fglrx] module loaded - fglrx 8.27.10 [Jul 27 2006] on minor 0
[4294757.801000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294760.047000] [fglrx] total GART = 134217728
[4294760.047000] [fglrx] free GART = 118226944
[4294760.047000] [fglrx] max single GART = 118226944
[4294760.047000] [fglrx] total LFB = 127889408
[4294760.047000] [fglrx] free LFB = 119697408
[4294760.047000] [fglrx] max single LFB = 119697408
[4294760.047000] [fglrx] total Inv = 0
[4294760.047000] [fglrx] free Inv = 0
[4294760.047000] [fglrx] max single Inv = 0
[4294760.047000] [fglrx] total TIM = 0
[4294879.026000] NET: Registered protocol family 10
[4294879.027000] lo: Disabled Privacy Extensions
[4294879.027000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294879.027000] IPv6 over IPv4 tunneling driver
[4294889.290000] eth1: no IPv6 routers present
[4296835.144000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[4296835.144000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4296888.374000] gameport: kgameportd exiting
[4296889.015000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[4296889.016000] PCI: Setting latency timer of device 0000:00:1b.0 to 64


lspci

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
01:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
01:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
01:01.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
01:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
01:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
03:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)


e permettimi di dirti una cosa, anche io lavoro x un agenzia informatica e sono un programmatore da 6 anni non sono molti ma nemmeno pochi, e se una periferica hw funziona con windows e con linux no, non significa che la periferica funziona male, nel mio caso con debian con knoppix e win xp funziona benissimo, quindi scusa se lo dico ma e impossibile che funzioni male, se cosi fosse credi che funzionerebbe male sia con debian che knoppix che windows.

detto questo se ti offendi x le mie opinioni, e meglio che non risp in un forum, dove ognuno e libero di pensarla come crede. :wink:
marzola
Simple Hen
 
Posts: 60
Joined: Mon Aug 21, 2006 1:48

Postby lxnay » Tue Aug 29, 2006 18:05

marzola wrote:mi sembra che hai la coda di paglia o sbaglio? :D

è una questione di "tatto" che si impara con l'esperienza. Penso che ci saranno molte persone disposte ad aiutarti ;)
Image
Join us on IRC (chat.freenode.net #sabayon or WebChat)
Submit bugs to our Bug Tracker
Follow me on Twitter
Add me on Facebook
Add me on Google+
lxnay
Land Owner
 
Posts: 3595
Joined: Thu Oct 13, 2005 23:16
Location: Italy

Postby Dark_MaGe » Tue Aug 29, 2006 18:05

potresti anche postare un'immagine degli switch che kmix ti da disponibili...? anche io ho una scheda hd sul desktop e ci sono certe impostazioni che cambiano totalmente il funzionamento dell'hw appena le attivi
Dark_MaGe
Your Farmer
 
Posts: 1699
Joined: Thu Jun 29, 2006 8:19
Location: Catania Italy

Next

Return to Sabayon Linux Discussioni Generali

Who is online

Users browsing this forum: francesco21 and 4 guests