connessione wireless ora vicina a funzionare (rr4 rc1)

Tutto ciò che è pertinente a Sabayon Linux, indipendentemente dall'architettura e dall'ambiente grafico

Moderator: Moderators

connessione wireless ora vicina a funzionare (rr4 rc1)

Postby bambino_finocchio » Wed Jun 21, 2006 19:08

Grazie infinite per aver messo i driver atmel sulla rc1 ora mi rileva il controller usb askey
vede la linea il segnale ottimo ma come mi connetto ? su kwifimanager mi trova la rete santis.... ma non ottiene l ip locale infondo al log dmesg si lamenta di non trovare un router ipv6....
ecco i log
Code: Select all

rr4user@rr4dvd ~ $ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11-DS  ESSID:"Santis*******"
          Mode:Managed  Frequency:2.437 GHz  Access Point: 00:90:96:44:6B:8F
          Bit Rate:11 Mb/s   Tx-Power=15 dBm
          Retry limit:8   RTS thr=1536 B   Fragment thr=1536 B
          Power Management period:19.968s  mode:All packets received
          Link Quality=0/0  Signal level=37/255  Noise level=0/0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

sit0      no wireless extensions.


rr4user@rr4dvd ~ $ lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 003: ID 059f:0351 LaCie, Ltd
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 045e:028e Microsoft Corp.
Bus 004 Device 001: ID 0000:0000
Bus 004 Device 002: ID 046d:0920 Logitech, Inc. QuickCam Express
Bus 003 Device 001: ID 0000:0000
Bus 003 Device 002: ID 046d:c03d Logitech, Inc.
Bus 005 Device 004: ID 069a:0321 Askey Computer Corp. Dynalink WLL013 / Compex WLU11A 802.11b Adapter
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 003: ID 03f0:1604 Hewlett-Packard DeskJet 940c
rr4user@rr4dvd ~ $                   

rr4user@rr4dvd ~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:11:2F:77:29:ED
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:20

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:339 errors:0 dropped:0 overruns:0 frame:0
          TX packets:339 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:53667 (52.4 Kb)  TX bytes:53667 (52.4 Kb)

wlan0     Link encap:Ethernet  HWaddr 00:90:96:4B:3D:91
          inet6 addr: fe80::290:96ff:fe4b:3d91/64 Scope:Link
          UP BROADCAST RUNNING  MTU:1500  Metric:1
          RX packets:236 errors:0 dropped:0 overruns:0 frame:0
          TX packets:249 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:315887 (308.4 Kb)  TX bytes:15658 (15.2 Kb)





var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76_usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12beta23-fw_dwl loading
[4294800.616000] i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
[4294800.721000] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 20
[4294800.721000] skge 1.5 addr 0xf7ffc000 irq 20 chip Yukon-Lite rev 7
[4294800.721000] skge eth0: addr 00:11:2f:77:29:ed
[4294801.106000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta23-fw_dwl
[4294801.108000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503-fw_skel.c: Atmel at76c503 (RFMD) Wireless LAN Driver v0.12beta23-fw_dwl loading
[4294804.476000] nvidia: module license 'NVIDIA' taints kernel.
[4294804.485000] usbcore: registered new driver at76c503-rfmd
[4294804.786000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[4294804.786000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15 13:06:38 PDT 2006
[4294805.038000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
[4294805.038000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294805.393000] AC'97 0 analog subsections not ready
[4294805.457000] intel8x0_measure_ac97_clock: measured 51959 usecs
[4294805.457000] intel8x0: clocking to 48000
[4294806.747000] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[4294806.881000] usb 5-1: device firmware changed
[4294806.881000] usb 5-1: USB disconnect, address 2
[4294806.881000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503-fw_skel.c: wlan0 disconnecting
[4294806.881000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503-fw_skel.c: at76c503-rfmd disconnected
[4294806.984000] usb 5-1: new full speed USB device using uhci_hcd and address 4
[4294807.126000] usb 5-1: configuration #1 chosen from 1 choice
[4294807.317000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: $Id: at76c503.c,v 1.74 2005/03/08 01:33:14 jal2 Exp $ compiled Jun 17 2006 19:40:15
[4294807.317000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: firmware version 1.101.2 #84 (fcs_len 4)
[4294807.318000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: device's MAC 00:90:96:4b:3d:91, regulatory domain MKK1 (Japan) (id 65)
[4294807.319000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: registered wlan0
[4294836.779000] skge eth0: enabling interface
[4294836.986000] Bridge firewalling registered
[4294841.292000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c:2926 assertion dev->istate == INIT failed
[4294842.029000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c:2897 assertion dev->istate == SCANNING failed
[4294845.582000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c:2926 assertion dev->istate == INIT failed
[4294924.157000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294924.157000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294924.157000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294927.309000] Bluetooth: Core ver 2.8
[4294927.309000] NET: Registered protocol family 31
[4294927.309000] Bluetooth: HCI device and connection manager initialized
[4294927.309000] Bluetooth: HCI socket layer initialized
[4294927.603000] Bluetooth: L2CAP ver 2.8
[4294927.603000] Bluetooth: L2CAP socket layer initialized
[4294927.908000] Bluetooth: RFCOMM socket layer initialized
[4294927.908000] Bluetooth: RFCOMM TTY layer initialized
[4294927.908000] Bluetooth: RFCOMM ver 1.7
[4294938.992000] ppdev0: registered pardevice
[4294939.033000] ppdev0: unregistered pardevice
[4294940.524000] ppdev0: registered pardevice
[4294940.568000] ppdev0: unregistered pardevice
[4294945.516000] NET: Registered protocol family 10
[4294945.516000] lo: Disabled Privacy Extensions
[4294945.516000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294945.517000] IPv6 over IPv4 tunneling driver
[4294949.078000] fbsplash: console 1 using theme 'default'
[4294949.083000] fbsplash: switched splash state to 'on' on console 1
[4294949.088000] fbsplash: console 2 using theme 'default'
[4294949.094000] fbsplash: switched splash state to 'on' on console 2
[4294949.099000] fbsplash: console 3 using theme 'default'
[4294949.104000] fbsplash: switched splash state to 'on' on console 3
[4294949.109000] fbsplash: console 4 using theme 'default'
[4294949.114000] fbsplash: switched splash state to 'on' on console 4
[4294949.119000] fbsplash: console 5 using theme 'default'
[4294949.125000] fbsplash: switched splash state to 'on' on console 5
[4294949.130000] fbsplash: console 6 using theme 'default'
[4294949.214000] fbsplash: switched splash state to 'on' on console 6
[4294949.219000] fbsplash: console 7 using theme 'default'
[4294949.224000] fbsplash: switched splash state to 'on' on console 7
[4294949.229000] fbsplash: console 8 using theme 'default'
[4294949.234000] fbsplash: switched splash state to 'on' on console 8
[4294949.239000] fbsplash: console 9 using theme 'default'
[4294949.245000] fbsplash: switched splash state to 'on' on console 9
[4294949.250000] fbsplash: console 10 using theme 'default'
[4294949.255000] fbsplash: switched splash state to 'on' on console 10
[4294951.958000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c:2926 assertion dev->istate == INIT failed
[4294952.690000] /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c: /var/tmp/portage/at76c503a-0.12_beta23-r3/work/at76c503a-0.12.beta23.orig/at76c503.c:2897 assertion dev->istate == SCANNING failed
[4294954.325000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[4294964.976000] wlan0: no IPv6 routers present
[4295145.800000] wlan0: no IPv6 routers present
[4295843.142000] wlan0: no IPv6 routers present
[4296021.273000] wlan0: no IPv6 routers present





bambino_finocchio
Simple Hen
 
Posts: 66
Joined: Wed Jun 14, 2006 18:20

Postby lxnay » Thu Jun 22, 2006 0:10

Prego!
Sinceramente, ottieni degli errori un po' strani in dmesg?
Stai usando il DVD in modalità Live?
da un bell'INIT FAILED.

Se non sbaglio il dispositivo è usb wireless? Com'è configurata la rete? WEP, WPA, DHCP?
lxnay
Land Owner
 
Posts: 3595
Joined: Thu Oct 13, 2005 23:16
Location: Italy

Postby bambino_finocchio » Thu Jun 22, 2006 14:21

si sto usando il dvd in modalità live !
senza cifratura wep in modalita managed ... dhcp
kwificonfig in suse funziona allo stesso modo solo che li riesce a ottenere ( e infatti lo indica ) l ip locale
192.168.1.4 mentre con la live rr4 vede la rete ma non l ip locale anche se lo in teoria quando fa il boot lo ottiene ...
forse dovrei provare a installarla e vedere che succede... ma devo masteriszzare un bel po di cose prima
cmq sto impazzendo perchè non vedo l ora di abbandonare suse 10 che è un polentone pieno di roba che non me ne faccio niente !
mah speriamo in tony almeno ...
grazie cmq ! faro altri tentativi
bambino_finocchio
Simple Hen
 
Posts: 66
Joined: Wed Jun 14, 2006 18:20

trovato

Postby bambino_finocchio » Fri Jun 23, 2006 20:33

ho capito che succede ...
il problema riguarda il driver atmel se rilancio rr4 dopo aver usato xp (la connessione con xp)
kwifi riesce a ottenere quel maledetto ip locale e quindi tutto funziona , mentre se lancio rr4 dopo aver usato suse ... nisba !

farò qualche altra ricerca
cmq sono troppo contento questo livedvd funziona alla grande !
appena ho tempo tolgo sta suse che è veramente pesante e brutta !
grazie lxnay
bambino_finocchio
Simple Hen
 
Posts: 66
Joined: Wed Jun 14, 2006 18:20

Postby Dark_MaGe » Thu Jun 29, 2006 9:02

puoi provare anche usando wifi-radar...non è malaccio sai
Dark_MaGe
Your Farmer
 
Posts: 1699
Joined: Thu Jun 29, 2006 8:19
Location: Catania Italy

Postby bambino_finocchio » Thu Jun 29, 2006 20:45

grazie per l informazione indaghero
bambino_finocchio
Simple Hen
 
Posts: 66
Joined: Wed Jun 14, 2006 18:20


Return to Sabayon Linux Discussioni Generali

Who is online

Users browsing this forum: No registered users and 1 guest