Sabayon upgrade failure

Discussion in general that pertains to Sabayon Linux - Must Pertain to Sabayon Linux

Moderator: Moderators

Post Reply
User avatar
Lazydog
Simple Hen
Posts: 81
Joined: Sat Sep 15, 2012 3:21

Sabayon upgrade failure

Post by Lazydog » Sun Mar 31, 2019 7:57

I am running The following Sabayon system:

Code: Select all

Gentoo Base System release 2.6
DISTRIB_ID="Sabayon"
NAME=Sabayon
ID=sabayon
PRETTY_NAME="Sabayon/Linux"
ANSI_COLOR="1;32"
HOME_URL="https://www.sabayon.org/"
SUPPORT_URL="https://forum.sabayon.org/"
BUG_REPORT_URL="https://bugs.sabayon.org/"
Sabayon Linux amd64 18.10
Sabayon amd64 release 18.10
System runs fast and fine. When I do an update to the system it becomes very slow and stops booting at the CLI telling me that I am in emergency mode and I should look a the log file.

Here is the LOG FILE

I'm hoping someone can help me figure out why the system is doing what it is.

Thanks.
--
Regards
Robert


Image

Fitzcarraldo
Sagely Hen
Posts: 8193
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom
Contact:

Re: Sabayon upgrade failure

Post by Fitzcarraldo » Sun Mar 31, 2019 13:33

If you search for "error" in your logfile, you will find the following:

Code: Select all

Mar 28 07:22:54 sabayon kernel: udisks-lvm-pv-e[797]: segfault at 0 ip 000056388437b069 sp 00007fff7a60c3f0 error 4 in udisks-lvm-pv-export[56388437a000+2000]
Looks a likely candidate for your problem. I would try re-installing but specify the partitions explicitly without LVM, with ext4 as the filesystem for the root partition (and for the boot partition if you decide to have a separate boot partition; and for the home partition if you decide to have a separate home partition).

User avatar
Lazydog
Simple Hen
Posts: 81
Joined: Sat Sep 15, 2012 3:21

Re: Sabayon upgrade failure

Post by Lazydog » Sun Mar 31, 2019 19:38

Thanks, how would an upgrade cause this? I have a backup of my system and I can revert, that's what I'm logged into now, and everything works fine. Only after the upgrade do I have this problem.
--
Regards
Robert


Image

Fitzcarraldo
Sagely Hen
Posts: 8193
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom
Contact:

Re: Sabayon upgrade failure

Post by Fitzcarraldo » Sun Mar 31, 2019 20:35

My guess would be the kernel.

User avatar
Lazydog
Simple Hen
Posts: 81
Joined: Sat Sep 15, 2012 3:21

Re: Sabayon upgrade failure

Post by Lazydog » Sun Mar 31, 2019 21:36

OK, but I haven't upgraded the kernel yet. You think if I upgraded the kernel first that would fix the issue? I'm currently running 4.18.11
--
Regards
Robert


Image

joost
Sagely Hen
Posts: 2742
Joined: Fri Nov 17, 2006 12:11
Location: The Netherlands
Contact:

Re: Sabayon upgrade failure

Post by joost » Sun Mar 31, 2019 22:02

4.18.x is EOL. Move to at least 4.19.x

(not even sure if problem is caused by the kernel, but just saying)
My blog | Mastodon | Please support Sabayon: Become a Patron

User avatar
Lazydog
Simple Hen
Posts: 81
Joined: Sat Sep 15, 2012 3:21

Re: Sabayon upgrade failure

Post by Lazydog » Sun Mar 31, 2019 22:33

Love to but doing so cause the system to want to upgrade. I might try this and see if the issue is removed when going to 4.20. Thnx.
--
Regards
Robert


Image

User avatar
albfneto
Sagely Hen
Posts: 1909
Joined: Fri Nov 16, 2007 1:15
Location: Ribeirão Preto City, São Paulo State, Brazil
Contact:

Re: Sabayon upgrade failure

Post by albfneto » Mon Apr 01, 2019 18:05

Seems to me kernel problems, or errors in the file systems.

I reccomend you to try this:

Give Boot with s Live DVD or a Live pendrive (pendrive of boot, for installation of Sabayon)

Them, booted, correct the HD partitions but on the boot of the Live DVD...

Code: Select all

# fsck /dev/sdXY
# fsck /dev/sdWZ
sdXY ís your root partition, /, in wich Sabayon is installed, example... sda2...
sdWZ is you /home partition, example sda3...

After corrected, reboot the comp, remove the Live DVD ou Live pendrive and try to upgarde again.
ALBERTO FEDERMAN NETO
albfneto
[email protected]
Favorite Distros: Sabayon, Gentoo, Mageia and OpenSUSE

User avatar
Lazydog
Simple Hen
Posts: 81
Joined: Sat Sep 15, 2012 3:21

Re: Sabayon upgrade failure

Post by Lazydog » Thu Apr 04, 2019 21:29

albfneto wrote:
Mon Apr 01, 2019 18:05
Seems to me kernel problems, or errors in the file systems.

I reccomend you to try this:

Give Boot with s Live DVD or a Live pendrive (pendrive of boot, for installation of Sabayon)

Them, booted, correct the HD partitions but on the boot of the Live DVD...

Code: Select all

# fsck /dev/sdXY
# fsck /dev/sdWZ
sdXY ís your root partition, /, in wich Sabayon is installed, example... sda2...
sdWZ is you /home partition, example sda3...

After corrected, reboot the comp, remove the Live DVD ou Live pendrive and try to upgarde again.
OK, the problem only happens after I upgrade. If I don't upgrade then everything works without issues. So I do not believe the file system is the problem unless something changed from one version to another.

I've upgraded and booted into the system. So maybe there is something here I can llook at or post that might give someone an idea what is really not working?
--
Regards
Robert


Image

User avatar
Lazydog
Simple Hen
Posts: 81
Joined: Sat Sep 15, 2012 3:21

Re: Sabayon upgrade failure

Post by Lazydog » Sat Apr 13, 2019 0:49

I tried several things.

1. FSCK and that did not fix anything
2. Reinstall and the problem still exists

Thinking back this happened in the past also which was why I installed Gentoo for a while, about 3 years I run it. I got tired of fighting updates on Gentoo so I reinstalled Sabayon for the last ~3 years it run without issue but now with newer hardware I shouldn't have these issues. I'm at a loss of how to fix this. I might have to start looking at another OS if I cannot get this fixed.

I'm using my Laptop now and really don't want to upgrade it until the desktop works. :(
--
Regards
Robert


Image

Post Reply