Unable to recognize USB devices [Solved]

Issues Related to Hardware (Sound, Video, Printers, Scanners, Webcams, Touchpads, Keyboards, Sensors, Drives, GRUB, etc.)

Moderator: Moderators

Unable to recognize USB devices [Solved]

Postby MattyC. » Tue Oct 04, 2011 18:06

Hi, I've just installed Sabayon Linux on my notebook ASUS K53SC and it doesn't recognize USB devices ( Mouse, Pen Drives and so on). But if I connect my USB devices during the boot of the system, after that my mouse and my Pen Drive are recognized: however, in every instance, on my connected (but not recognized) mouse appear the red light of working, but the cursor doesn't move anymore, and if I try to write the command lsusb on a terminal there is NO answer, it holds steady and nothing appears.
Somebody can help me? Thanks.
Last edited by MattyC. on Thu Oct 06, 2011 17:50, edited 1 time in total.
MattyC.
Baby Hen
 
Posts: 8
Joined: Sat Feb 20, 2010 16:26

Re: Unable to recognize USB devices

Postby micia » Wed Oct 05, 2011 12:31

Hi MattyC.:
Are you able to get some logs when the problem appears?

From your post I guess that you are at least able to switch VT with Ctrl+Alt+F1, when you do, can you post the contents of:
/var/log/messages
/var/log/Xorg.0.log
?

Or the issue does not allow you to even get a working console?
micia
Sagely Hen
 
Posts: 2718
Joined: Wed Nov 26, 2008 16:41

Re: Unable to recognize USB devices

Postby DanySK » Wed Oct 05, 2011 16:39

He's able to get to a normal KDE session. Just lsusb does not work, the strange is that the PC is perfectly able to boot a Sabayon Live USB made with Unetbootin.
Matty, you may attach your cookbug.
User avatar
DanySK
Technological Hen
 
Posts: 354
Joined: Tue May 22, 2007 10:18
Location: Pennabilli - Cesena

Re: Unable to recognize USB devices

Postby MattyC. » Wed Oct 05, 2011 17:14

Ok, now I post the contents of the commands when I connect my USB Pen Drive
note that my Optical Mouse is recognized and works because I've connected it during the boot of the system.


cat /var/log/messages

Code: Select all
Oct  5 17:58:24 localhost kernel: [ 2784.913565] usb 3-1: new full speed USB device number 5 using xhci_hcd
Oct  5 17:58:24 localhost kernel: [ 2784.928501] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
Oct  5 17:58:24 localhost kernel: [ 2784.928784] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
Oct  5 17:58:24 localhost kernel: [ 2784.928971] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
Oct  5 17:58:24 localhost kernel: [ 2784.929166] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
Oct  5 17:58:24 localhost kernel: [ 2784.929186] usb 3-1: New USB device found, idVendor=066f, idProduct=8000
Oct  5 17:58:24 localhost kernel: [ 2784.929193] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct  5 17:58:24 localhost kernel: [ 2784.929199] usb 3-1: Product: <USB PRODUCT>   
Oct  5 17:58:24 localhost kernel: [ 2784.929204] usb 3-1: Manufacturer: <USB MF>
Oct  5 17:58:24 localhost kernel: [ 2784.929209] usb 3-1: SerialNumber: 23DE907A91648417
Oct  5 17:58:24 localhost kernel: [ 2784.930698] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
Oct  5 17:58:24 localhost kernel: [ 2784.930916] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
Oct  5 17:58:24 localhost kernel: [ 2784.931174] scsi11 : usb-storage 3-1:1.0
Oct  5 17:58:24 localhost udevd[5678]: timeout: killing 'usb_id --export /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/video4linux/video0' [5896]
Oct  5 17:58:25 localhost udevd[6182]: timeout: killing '/lib64/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1 3 2' [8864]
Oct  5 17:58:25 localhost udevd[5678]: timeout: killing 'usb_id --export /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/video4linux/video0' [5896]


cat /var/log/Xorg.0.log

Code: Select all
[    81.530]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    81.530] X Protocol Version 11, Revision 0
[    81.530] Build Operating System: Linux 2.6.38-sabayon x86_64 Gentoo
[    81.530] Current Operating System: Linux sabayon 3.0.0-sabayon #1 SMP Wed Aug 31 05:36:15 UTC 2011 x86_64
[    81.530] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-3.0.0-sabayon ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet dokeymap keymap=it domdadm resume=swap:/dev/mapper/vg_sabayon-lv_swap real_resume=/dev/mapper/vg_sabayon-lv_swap dolvm root=/dev/mapper/vg_sabayon-lv_root docrypt
[    81.530] Build Date: 30 September 2011  08:26:36PM
[    81.530] 
[    81.530] Current version of pixman: 0.22.0
[    81.530]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    81.530] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    81.530] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct  5 17:13:20 2011
[    81.799] (==) Using config file: "/etc/X11/xorg.conf"
[    81.799] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    81.799] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    81.912] (==) ServerLayout "Main Layout"
[    81.912] (**) |-->Screen "Screen 0" (0)
[    81.912] (**) |   |-->Monitor "Generic Monitor"
[    81.912] (**) |   |-->Device "SabayonVga0"
[    81.912] (**) |-->Screen "Screen 1" (1)
[    81.912] (**) |   |-->Monitor "Generic Monitor"
[    81.912] (**) |   |-->Device "SabayonVga1"
[    81.912] (**) Option "AllowMouseOpenFail" "true"
[    81.912] (==) Automatically adding devices
[    81.912] (==) Automatically enabling devices
[    81.992] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    81.992]    Entry deleted from font path.
[    81.992] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    81.992]    Entry deleted from font path.
[    81.992] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    81.992]    Entry deleted from font path.
[    82.015] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    82.015]    Entry deleted from font path.
[    82.015]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    82.020] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    82.020]    Entry deleted from font path.
[    82.020]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    82.020] (==) FontPath set to:
        /usr/share/fonts/misc/
[    82.020] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    82.020] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    82.020] (II) Loader magic: 0x7d7080
[    82.020] (II) Module ABI versions:
[    82.020]    X.Org ANSI C Emulation: 0.4
[    82.020]    X.Org Video Driver: 10.0
[    82.020]    X.Org XInput driver : 12.2
[    82.020]    X.Org Server Extension : 5.0
[    82.021] (--) PCI:*(0:0:2:0) 8086:0116:1043:1682 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[    82.021] (--) PCI: (0:1:0:0) 10de:1051:1043:1762 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    82.021] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    82.021] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    82.021] (II) "dbe" will be loaded by default.
[    82.021] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    82.021] (II) "record" will be loaded by default.
[    82.021] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    82.021] (II) "dri2" will be loaded by default.
[    82.021] (II) LoadModule: "extmod"
[    82.225] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    82.248] (II) Module extmod: vendor="X.Org Foundation"
[    82.248]    compiled for 1.10.4, module version = 1.0.0
[    82.248]    Module class: X.Org Server Extension
[    82.248]    ABI class: X.Org Server Extension, version 5.0
[    82.248] (II) Loading extension MIT-SCREEN-SAVER
[    82.248] (II) Loading extension XFree86-VidModeExtension
[    82.248] (II) Loading extension DPMS
[    82.248] (II) Loading extension XVideo
[    82.248] (II) Loading extension XVideo-MotionCompensation
[    82.248] (II) Loading extension X-Resource
[    82.248] (II) LoadModule: "i2c"
[    82.248] (II) Module "i2c" already built-in
[    82.248] (II) LoadModule: "ddc"
[    82.248] (II) Module "ddc" already built-in
[    82.248] (II) LoadModule: "vbe"
[    82.248] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    82.256] (II) Module vbe: vendor="X.Org Foundation"
[    82.256]    compiled for 1.10.4, module version = 1.1.0
[    82.256]    ABI class: X.Org Video Driver, version 10.0
[    82.256] (II) LoadModule: "dri"
[    82.256] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    82.286] (II) Module dri: vendor="X.Org Foundation"
[    82.286]    compiled for 1.10.4, module version = 1.0.0
[    82.286]    ABI class: X.Org Server Extension, version 5.0
[    82.286] (II) Loading extension XFree86-DRI
[    82.286] (II) LoadModule: "glx"
[    82.286] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    82.305] (II) Module glx: vendor="X.Org Foundation"
[    82.305]    compiled for 1.10.4, module version = 1.0.0
[    82.305]    ABI class: X.Org Server Extension, version 5.0
[    82.305] (==) AIGLX enabled
[    82.305] (II) Loading extension GLX
[    82.305] (II) LoadModule: "synaptics"
[    82.305] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    82.458] (II) Module synaptics: vendor="X.Org Foundation"
[    82.458]    compiled for 1.10.2, module version = 1.4.0
[    82.458]    Module class: X.Org XInput Driver
[    82.458]    ABI class: X.Org XInput driver, version 12.2
[    82.458] (II) LoadModule: "dbe"
[    82.458] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    82.477] (II) Module dbe: vendor="X.Org Foundation"
[    82.477]    compiled for 1.10.4, module version = 1.0.0
[    82.477]    Module class: X.Org Server Extension
[    82.477]    ABI class: X.Org Server Extension, version 5.0
[    82.477] (II) Loading extension DOUBLE-BUFFER
[    82.477] (II) LoadModule: "record"
[    82.477] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    82.500] (II) Module record: vendor="X.Org Foundation"
[    82.500]    compiled for 1.10.4, module version = 1.13.0
[    82.500]    Module class: X.Org Server Extension
[    82.500]    ABI class: X.Org Server Extension, version 5.0
[    82.500] (II) Loading extension RECORD
[    82.500] (II) LoadModule: "dri2"
[    82.501] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    82.505] (II) Module dri2: vendor="X.Org Foundation"
[    82.505]    compiled for 1.10.4, module version = 1.2.0
[    82.505]    ABI class: X.Org Server Extension, version 5.0
[    82.505] (II) Loading extension DRI2
[    82.505] (II) LoadModule: "intel"
[    82.618] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    82.638] (II) Module intel: vendor="X.Org Foundation"
[    82.638]    compiled for 1.10.2.902, module version = 2.15.0
[    82.638]    Module class: X.Org Video Driver
[    82.638]    ABI class: X.Org Video Driver, version 10.0
[    82.638] (II) LoadModule: "nv"
[    82.638] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
[    82.653] (II) Module nv: vendor="X.Org Foundation"
[    82.653]    compiled for 1.10.2, module version = 2.1.18
[    82.653]    Module class: X.Org Video Driver
[    82.653]    ABI class: X.Org Video Driver, version 10.0
[    82.653] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
        Sandybridge, Sandybridge
[    82.655] (++) using VT number 7

[    82.800] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    82.801] (EE) intel(0): NV: The PCI device 0x10de1051 ((null)) at 01@00:00:0 has a kernel module claiming it.
[    82.801] (EE) intel(0): NV: This driver cannot operate until it has been unloaded.
[    82.801] drmOpenDevice: node name is /dev/dri/card0
[    82.801] drmOpenDevice: open result is 8, (OK)
[    82.801] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    82.801] drmOpenDevice: node name is /dev/dri/card0
[    82.801] drmOpenDevice: open result is 8, (OK)
[    82.801] drmOpenByBusid: drmOpenMinor returns 8
[    82.801] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    82.801] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    82.801] (==) intel(0): RGB weight 888
[    82.801] (==) intel(0): Default visual is TrueColor
[    82.801] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
[    82.801] (--) intel(0): Chipset: "Sandybridge"
[    82.801] (**) intel(0): Relaxed fencing enabled
[    82.801] (**) intel(0): Framebuffer tiled
[    82.801] (**) intel(0): Pixmaps tiled
[    82.801] (**) intel(0): 3D buffers tiled
[    82.801] (**) intel(0): SwapBuffers wait disabled
[    82.801] (==) intel(0): video overlay key set to 0x101fe
[    82.801] (II) intel(0): Output LVDS1 using monitor section Generic Monitor
[    82.801] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    82.801] (II) intel(0): Output VGA1 has no monitor section
[    82.824] (II) intel(0): Output HDMI1 has no monitor section
[    82.836] (II) intel(0): Output DP1 has no monitor section
[    82.836] (II) intel(0): EDID for output LVDS1
[    82.836] (II) intel(0): Manufacturer: LGD  Model: 2dc  Serial#: 0
[    82.836] (II) intel(0): Year: 2010  Week: 0
[    82.836] (II) intel(0): EDID Version: 1.3
[    82.836] (II) intel(0): Digital Display Input
[    82.836] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    82.836] (II) intel(0): Gamma: 2.20
[    82.836] (II) intel(0): No DPMS capabilities specified
[    82.836] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    82.836] (II) intel(0): First detailed timing is preferred mode
[    82.836] (II) intel(0): redX: 0.623 redY: 0.369   greenX: 0.346 greenY: 0.610
[    82.836] (II) intel(0): blueX: 0.148 blueY: 0.098   whiteX: 0.313 whiteY: 0.329
[    82.836] (II) intel(0): Manufacturer's mask: 0
[    82.836] (II) intel(0): Supported detailed timing:
[    82.836] (II) intel(0): clock: 70.0 MHz   Image Size:  344 x 194 mm
[    82.836] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[    82.836] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[    82.836] (II) intel(0):  LG Display
[    82.836] (II) intel(0):  LP156WH4-TLA1
[    82.836] (II) intel(0): EDID (in hex):
[    82.836] (II) intel(0):     00ffffffffffff0030e4dc0200000000
[    82.836] (II) intel(0):     00140103802213780aa9059f5e589c26
[    82.836] (II) intel(0):     19505400000001010101010101010101
[    82.836] (II) intel(0):     010101010101581b567e50000e302430
[    82.836] (II) intel(0):     350058c2100000190000000000000000
[    82.836] (II) intel(0):     00000000000000000000000000fe004c
[    82.836] (II) intel(0):     4720446973706c61790a2020000000fe
[    82.836] (II) intel(0):     004c503135365748342d544c41310079
[    82.836] (II) intel(0): EDID vendor "LGD", prod id 732
[    82.836] (II) intel(0): Printing DDC gathered Modelines:
[    82.836] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[    82.836] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    82.836] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    82.836] (II) intel(0): Printing probed modes for output LVDS1
[    82.836] (II) intel(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[    82.836] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    82.836] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    82.836] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    82.836] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    82.836] (II) intel(0): EDID for output VGA1
[    82.859] (II) intel(0): EDID for output HDMI1
[    82.871] (II) intel(0): EDID for output DP1
[    82.871] (II) intel(0): Output LVDS1 connected
[    82.871] (II) intel(0): Output VGA1 disconnected
[    82.871] (II) intel(0): Output HDMI1 disconnected
[    82.871] (II) intel(0): Output DP1 disconnected
[    82.871] (II) intel(0): Using exact sizes for initial modes
[    82.871] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    82.871] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    82.871] (II) intel(0): Kernel page flipping support detected, enabling
[    82.871] (**) intel(0): Display dimensions: (340, 190) mm
[    82.871] (**) intel(0): DPI set to (102, 102)
[    82.871] (II) Loading sub module "fb"
[    82.871] (II) LoadModule: "fb"
[    82.871] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    82.938] (II) Module fb: vendor="X.Org Foundation"
[    82.938]    compiled for 1.10.4, module version = 1.0.0
[    82.938]    ABI class: X.Org ANSI C Emulation, version 0.4
[    82.938] (II) Loading sub module "dri2"
[    82.938] (II) LoadModule: "dri2"
[    82.938] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    82.938] (II) Module dri2: vendor="X.Org Foundation"
[    82.938]    compiled for 1.10.4, module version = 1.2.0
[    82.938]    ABI class: X.Org Server Extension, version 5.0
[    82.938] (==) Depth 24 pixmap format is 32 bpp
[    82.938] (II) intel(0): [DRI2] Setup complete
[    82.938] (II) intel(0): [DRI2]   DRI driver: i965
[    82.938] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    82.966] (II) UXA(0): Driver registered support for the following operations:
[    82.967] (II)         solid
[    82.967] (II)         copy
[    82.967] (II)         composite (RENDER acceleration)
[    82.967] (II)         put_image
[    82.967] (II)         get_image
[    82.967] (==) intel(0): Backing store disabled
[    82.967] (==) intel(0): Silken mouse enabled
[    82.967] (II) intel(0): Initializing HW Cursor
[    83.035] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    83.036] (==) intel(0): DPMS enabled
[    83.036] (==) intel(0): Intel XvMC decoder enabled
[    83.036] (II) intel(0): Set up textured video
[    83.036] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    83.036] (II) intel(0): direct rendering: DRI2 Enabled
[    83.036] (WW) intel(0): Option "LogoPath" is not used
[    83.036] (==) intel(0): hotplug detection: "enabled"
[    83.036] (--) RandR disabled
[    83.036] (II) Initializing built-in extension Generic Event Extension
[    83.036] (II) Initializing built-in extension SHAPE
[    83.036] (II) Initializing built-in extension MIT-SHM
[    83.036] (II) Initializing built-in extension XInputExtension
[    83.036] (II) Initializing built-in extension XTEST
[    83.036] (II) Initializing built-in extension BIG-REQUESTS
[    83.036] (II) Initializing built-in extension SYNC
[    83.036] (II) Initializing built-in extension XKEYBOARD
[    83.036] (II) Initializing built-in extension XC-MISC
[    83.036] (II) Initializing built-in extension XINERAMA
[    83.036] (II) Initializing built-in extension XFIXES
[    83.036] (II) Initializing built-in extension RENDER
[    83.036] (II) Initializing built-in extension RANDR
[    83.036] (II) Initializing built-in extension COMPOSITE
[    83.036] (II) Initializing built-in extension DAMAGE
[    83.418] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    83.418] (II) AIGLX: enabled GLX_INTEL_swap_event
[    83.418] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    83.418] (II) AIGLX: enabled GLX_SGI_make_current_read
[    83.418] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    83.418] (II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
[    83.418] (II) GLX: Initialized DRI2 GL provider for screen 0
[    83.419] (II) intel(0): Setting screen physical size to 361 x 203
[    84.169] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    84.169] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    84.169] (**) Power Button: Applying InputClass "keyboard"
[    84.169] (II) LoadModule: "evdev"
[    84.169] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.207] (II) Module evdev: vendor="X.Org Foundation"
[    84.207]    compiled for 1.10.2, module version = 2.6.0
[    84.207]    Module class: X.Org XInput Driver
[    84.207]    ABI class: X.Org XInput driver, version 12.2
[    84.207] (II) Using input driver 'evdev' for 'Power Button'
[    84.207] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.207] (**) Power Button: always reports core events
[    84.207] (**) Power Button: Device: "/dev/input/event2"
[    84.207] (--) Power Button: Found keys
[    84.207] (II) Power Button: Configuring as keyboard
[    84.207] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    84.207] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    84.207] (**) Option "xkb_rules" "evdev"
[    84.207] (**) Option "xkb_model" "evdev"
[    84.207] (**) Option "xkb_layout" "it"
[    84.207] (WW) Option "xkb_variant" requires an string value
[    84.207] (WW) Option "XkbVariant" requires an string value
[    84.207] (WW) Option "xkb_options" requires an string value
[    84.207] (WW) Option "XkbOptions" requires an string value
[    84.292] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    84.292] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    84.292] (**) Video Bus: Applying InputClass "keyboard"
[    84.292] (II) Using input driver 'evdev' for 'Video Bus'
[    84.292] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.292] (**) Video Bus: always reports core events
[    84.292] (**) Video Bus: Device: "/dev/input/event9"
[    84.292] (--) Video Bus: Found keys
[    84.292] (II) Video Bus: Configuring as keyboard
[    84.292] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[    84.292] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    84.292] (**) Option "xkb_rules" "evdev"
[    84.292] (**) Option "xkb_model" "evdev"
[    84.292] (**) Option "xkb_layout" "it"
[    84.292] (WW) Option "xkb_variant" requires an string value
[    84.292] (WW) Option "XkbVariant" requires an string value
[    84.292] (WW) Option "xkb_options" requires an string value
[    84.292] (WW) Option "XkbOptions" requires an string value
[    84.296] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    84.296] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    84.296] (**) Video Bus: Applying InputClass "keyboard"
[    84.296] (II) Using input driver 'evdev' for 'Video Bus'
[    84.296] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.296] (**) Video Bus: always reports core events
[    84.296] (**) Video Bus: Device: "/dev/input/event8"
[    84.296] (--) Video Bus: Found keys
[    84.296] (II) Video Bus: Configuring as keyboard
[    84.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input8/event8"
[    84.296] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    84.296] (**) Option "xkb_rules" "evdev"
[    84.296] (**) Option "xkb_model" "evdev"
[    84.296] (**) Option "xkb_layout" "it"
[    84.296] (WW) Option "xkb_variant" requires an string value
[    84.296] (WW) Option "XkbVariant" requires an string value
[    84.296] (WW) Option "xkb_options" requires an string value
[    84.296] (WW) Option "XkbOptions" requires an string value
[    84.297] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    84.297] (II) No input driver/identifier specified (ignoring)
[    84.297] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    84.297] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    84.297] (**) Sleep Button: Applying InputClass "keyboard"
[    84.297] (II) Using input driver 'evdev' for 'Sleep Button'
[    84.297] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.297] (**) Sleep Button: always reports core events
[    84.297] (**) Sleep Button: Device: "/dev/input/event1"
[    84.297] (--) Sleep Button: Found keys
[    84.297] (II) Sleep Button: Configuring as keyboard
[    84.297] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    84.297] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    84.297] (**) Option "xkb_rules" "evdev"
[    84.297] (**) Option "xkb_model" "evdev"
[    84.297] (**) Option "xkb_layout" "it"
[    84.297] (WW) Option "xkb_variant" requires an string value
[    84.297] (WW) Option "XkbVariant" requires an string value
[    84.297] (WW) Option "xkb_options" requires an string value
[    84.297] (WW) Option "XkbOptions" requires an string value
[    84.299] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event10)
[    84.299] (II) No input driver/identifier specified (ignoring)
[    84.300] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    84.300] (II) No input driver/identifier specified (ignoring)
[    84.300] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    84.300] (II) No input driver/identifier specified (ignoring)
[    84.302] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[    84.302] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    84.302] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    84.302] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.302] (**) USB Optical Mouse: always reports core events
[    84.302] (**) USB Optical Mouse: Device: "/dev/input/event5"
[    84.302] (--) USB Optical Mouse: Found 3 mouse buttons
[    84.302] (--) USB Optical Mouse: Found scroll wheel(s)
[    84.302] (--) USB Optical Mouse: Found relative axes
[    84.302] (--) USB Optical Mouse: Found x and y relative axes
[    84.302] (II) USB Optical Mouse: Configuring as mouse
[    84.302] (II) USB Optical Mouse: Adding scrollwheel support
[    84.302] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    84.302] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    84.302] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
[    84.302] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[    84.302] (II) USB Optical Mouse: initialized for relative axes.
[    84.302] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    84.302] (**) USB Optical Mouse: (accel) acceleration profile 0
[    84.302] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    84.302] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    84.302] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[    84.302] (II) No input driver/identifier specified (ignoring)
[    84.305] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[    84.305] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    84.305] (**) Asus WMI hotkeys: Applying InputClass "keyboard"
[    84.305] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[    84.305] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.305] (**) Asus WMI hotkeys: always reports core events
[    84.305] (**) Asus WMI hotkeys: Device: "/dev/input/event7"
[    84.305] (--) Asus WMI hotkeys: Found keys
[    84.305] (II) Asus WMI hotkeys: Configuring as keyboard
[    84.305] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event7"
[    84.305] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD)
[    84.305] (**) Option "xkb_rules" "evdev"
[    84.305] (**) Option "xkb_model" "evdev"
[    84.305] (**) Option "xkb_layout" "it"
[    84.305] (WW) Option "xkb_variant" requires an string value
[    84.305] (WW) Option "XkbVariant" requires an string value
[    84.305] (WW) Option "xkb_options" requires an string value
[    84.305] (WW) Option "XkbOptions" requires an string value
[    84.305] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    84.305] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    84.305] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[    84.305] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    84.305] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    84.305] (**) AT Translated Set 2 keyboard: always reports core events
[    84.305] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    84.305] (--) AT Translated Set 2 keyboard: Found keys
[    84.305] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    84.305] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    84.305] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    84.305] (**) Option "xkb_rules" "evdev"
[    84.306] (**) Option "xkb_model" "evdev"
[    84.306] (**) Option "xkb_layout" "it"
[    84.306] (WW) Option "xkb_variant" requires an string value
[    84.306] (WW) Option "XkbVariant" requires an string value
[    84.306] (WW) Option "xkb_options" requires an string value
[    84.306] (WW) Option "XkbOptions" requires an string value
[    84.306] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[    84.306] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    84.306] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    84.306] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    84.306] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    84.306] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    84.306] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    84.306] (**) Option "Device" "/dev/input/event4"
[    84.349] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762
[    84.349] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902
[    84.349] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    84.349] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    84.349] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    84.349] (**) Option "VertEdgeScroll" "1"
[    84.349] (**) Option "VertTwoFingerScroll" "1"
[    84.349] (**) Option "HorizTwoFingerScroll" "1"
[    84.349] (**) Option "TapButton1" "1"
[    84.349] (**) Option "TapButton2" "2"
[    84.349] (**) Option "TapButton3" "3"
[    84.349] (**) Option "CircularScrolling" "0"
[    84.387] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    84.387] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    84.419] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input4/event4"
[    84.419] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    84.419] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    84.419] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    84.419] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    84.419] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    84.419] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    84.419] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    84.419] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    84.419] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    84.419] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    84.419] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    84.419] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    84.419] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    84.419] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    84.419] (**) Option "Device" "/dev/input/mouse0"
[    84.419] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range.  defaulting to 1615 - 5685
[    84.419] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range.  defaulting to 1729 - 4171
[    84.419] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.  defaulting to 0 - 256
[    84.419] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 16
[    84.439] (EE) Query no Synaptics: 6003C8
[    84.439] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[    84.440] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[    84.475] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[    84.475] (II) UnloadModule: "synaptics"
[    84.475] (II) Unloading synaptics
[    84.475] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    84.475] (II) No input driver/identifier specified (ignoring)
[   115.689] (II) intel(0): EDID vendor "LGD", prod id 732
[   115.689] (II) intel(0): Printing DDC gathered Modelines:
[   115.689] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   131.601] (II) intel(0): EDID vendor "LGD", prod id 732
[   131.601] (II) intel(0): Printing DDC gathered Modelines:
[   131.601] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   136.689] (II) AIGLX: Suspending AIGLX clients for VT switch
[   229.016] (II) AIGLX: Resuming AIGLX clients after VT switch
[   229.069] (II) intel(0): EDID vendor "LGD", prod id 732
[   229.069] (II) intel(0): Printing DDC gathered Modelines:
[   229.069] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   229.107] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   233.357] (II) AIGLX: Suspending AIGLX clients for VT switch
[   284.454] (II) AIGLX: Resuming AIGLX clients after VT switch
[   284.506] (II) intel(0): EDID vendor "LGD", prod id 732
[   284.506] (II) intel(0): Printing DDC gathered Modelines:
[   284.506] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   284.542] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   333.427] (II) AIGLX: Suspending AIGLX clients for VT switch
[   341.367] (II) AIGLX: Resuming AIGLX clients after VT switch
[   341.419] (II) intel(0): EDID vendor "LGD", prod id 732
[   341.419] (II) intel(0): Printing DDC gathered Modelines:
[   341.419] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   341.457] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   410.179] (II) AIGLX: Suspending AIGLX clients for VT switch
[   420.689] (II) AIGLX: Resuming AIGLX clients after VT switch
[   420.742] (II) intel(0): EDID vendor "LGD", prod id 732
[   420.742] (II) intel(0): Printing DDC gathered Modelines:
[   420.742] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   420.778] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   422.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[   433.613] (II) AIGLX: Resuming AIGLX clients after VT switch
[   433.665] (II) intel(0): EDID vendor "LGD", prod id 732
[   433.665] (II) intel(0): Printing DDC gathered Modelines:
[   433.665] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   433.702] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   460.767] (II) AIGLX: Suspending AIGLX clients for VT switch
[   466.017] (II) AIGLX: Resuming AIGLX clients after VT switch
[   466.068] (II) intel(0): EDID vendor "LGD", prod id 732
[   466.068] (II) intel(0): Printing DDC gathered Modelines:
[   466.068] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   466.108] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   473.947] (II) AIGLX: Suspending AIGLX clients for VT switch
[   478.603] (II) AIGLX: Resuming AIGLX clients after VT switch
[   478.656] (II) intel(0): EDID vendor "LGD", prod id 732
[   478.656] (II) intel(0): Printing DDC gathered Modelines:
[   478.656] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   478.693] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   486.103] (II) AIGLX: Suspending AIGLX clients for VT switch
[   490.673] (II) AIGLX: Resuming AIGLX clients after VT switch
[   490.725] (II) intel(0): EDID vendor "LGD", prod id 732
[   490.725] (II) intel(0): Printing DDC gathered Modelines:
[   490.725] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   490.763] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   500.045] (II) AIGLX: Suspending AIGLX clients for VT switch
[   520.432] (II) AIGLX: Resuming AIGLX clients after VT switch
[   520.485] (II) intel(0): EDID vendor "LGD", prod id 732
[   520.485] (II) intel(0): Printing DDC gathered Modelines:
[   520.485] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   520.522] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   530.115] (II) AIGLX: Suspending AIGLX clients for VT switch
[   534.673] (II) AIGLX: Resuming AIGLX clients after VT switch
[   534.725] (II) intel(0): EDID vendor "LGD", prod id 732
[   534.725] (II) intel(0): Printing DDC gathered Modelines:
[   534.725] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   534.763] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   541.933] (II) AIGLX: Suspending AIGLX clients for VT switch
[   548.006] (II) AIGLX: Resuming AIGLX clients after VT switch
[   548.058] (II) intel(0): EDID vendor "LGD", prod id 732
[   548.058] (II) intel(0): Printing DDC gathered Modelines:
[   548.058] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   548.097] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   554.805] (II) AIGLX: Suspending AIGLX clients for VT switch
[   561.965] (II) AIGLX: Resuming AIGLX clients after VT switch
[   562.018] (II) intel(0): EDID vendor "LGD", prod id 732
[   562.018] (II) intel(0): Printing DDC gathered Modelines:
[   562.018] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   562.063] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   570.399] (II) AIGLX: Suspending AIGLX clients for VT switch
[   576.317] (II) AIGLX: Resuming AIGLX clients after VT switch
[   576.370] (II) intel(0): EDID vendor "LGD", prod id 732
[   576.370] (II) intel(0): Printing DDC gathered Modelines:
[   576.370] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   576.408] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   583.674] (II) AIGLX: Suspending AIGLX clients for VT switch
[   586.740] (II) AIGLX: Resuming AIGLX clients after VT switch
[   586.792] (II) intel(0): EDID vendor "LGD", prod id 732
[   586.792] (II) intel(0): Printing DDC gathered Modelines:
[   586.792] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   586.829] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   590.640] (II) AIGLX: Suspending AIGLX clients for VT switch
[   595.378] (II) AIGLX: Resuming AIGLX clients after VT switch
[   595.430] (II) intel(0): EDID vendor "LGD", prod id 732
[   595.430] (II) intel(0): Printing DDC gathered Modelines:
[   595.430] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   595.469] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   600.063] (II) AIGLX: Suspending AIGLX clients for VT switch
[   613.576] (II) AIGLX: Resuming AIGLX clients after VT switch
[   613.628] (II) intel(0): EDID vendor "LGD", prod id 732
[   613.628] (II) intel(0): Printing DDC gathered Modelines:
[   613.628] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   613.667] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   621.365] (II) AIGLX: Suspending AIGLX clients for VT switch
[   628.266] (II) AIGLX: Resuming AIGLX clients after VT switch
[   628.318] (II) intel(0): EDID vendor "LGD", prod id 732
[   628.318] (II) intel(0): Printing DDC gathered Modelines:
[   628.318] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   628.358] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   636.281] (II) AIGLX: Suspending AIGLX clients for VT switch
[   643.240] (II) AIGLX: Resuming AIGLX clients after VT switch
[   643.292] (II) intel(0): EDID vendor "LGD", prod id 732
[   643.292] (II) intel(0): Printing DDC gathered Modelines:
[   643.292] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   643.331] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   649.985] (II) AIGLX: Suspending AIGLX clients for VT switch
[   656.389] (II) AIGLX: Resuming AIGLX clients after VT switch
[   656.441] (II) intel(0): EDID vendor "LGD", prod id 732
[   656.441] (II) intel(0): Printing DDC gathered Modelines:
[   656.441] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   656.479] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   662.306] (II) AIGLX: Suspending AIGLX clients for VT switch
[   667.779] (II) AIGLX: Resuming AIGLX clients after VT switch
[   667.830] (II) intel(0): EDID vendor "LGD", prod id 732
[   667.830] (II) intel(0): Printing DDC gathered Modelines:
[   667.830] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   667.869] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   674.883] (II) AIGLX: Suspending AIGLX clients for VT switch
[   681.436] (II) AIGLX: Resuming AIGLX clients after VT switch
[   681.487] (II) intel(0): EDID vendor "LGD", prod id 732
[   681.487] (II) intel(0): Printing DDC gathered Modelines:
[   681.487] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   681.526] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   740.379] (II) AIGLX: Suspending AIGLX clients for VT switch
[   894.974] (II) AIGLX: Resuming AIGLX clients after VT switch
[   895.026] (II) intel(0): EDID vendor "LGD", prod id 732
[   895.026] (II) intel(0): Printing DDC gathered Modelines:
[   895.026] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[   895.063] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   898.614] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1034.247] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1034.299] (II) intel(0): EDID vendor "LGD", prod id 732
[  1034.299] (II) intel(0): Printing DDC gathered Modelines:
[  1034.299] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[  1034.337] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  1163.005] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1253.207] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1253.260] (II) intel(0): EDID vendor "LGD", prod id 732
[  1253.260] (II) intel(0): Printing DDC gathered Modelines:
[  1253.260] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[  1253.303] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  1279.159] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1289.529] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1289.581] (II) intel(0): EDID vendor "LGD", prod id 732
[  1289.581] (II) intel(0): Printing DDC gathered Modelines:
[  1289.581] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[  1289.620] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  1297.904] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1314.395] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1314.447] (II) intel(0): EDID vendor "LGD", prod id 732
[  1314.447] (II) intel(0): Printing DDC gathered Modelines:
[  1314.447] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[  1314.487] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  1398.451] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1511.126] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1511.178] (II) intel(0): EDID vendor "LGD", prod id 732
[  1511.178] (II) intel(0): Printing DDC gathered Modelines:
[  1511.178] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[  1511.219] (--) SynPS/2 Synaptics TouchPad: touchpad found


Yes, Dani, I should do it, but the problem is that the command sudo cookbug stops at:


>> Getting: USB Hardware Devices
MattyC.
Baby Hen
 
Posts: 8
Joined: Sat Feb 20, 2010 16:26

Re: Unable to recognize USB devices

Postby MattyC. » Wed Oct 05, 2011 17:16

sudo dmesg

ed out
Code: Select all
[    2.876226] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.876556] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.876568] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.876576] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.877014] ata2.00: configured for UDMA/100
[    2.878157] ata1.00: configured for UDMA/133
[    2.878373] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0003 PQ: 0 ANSI: 5
[    2.878954] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.879005] sd 0:0:0:0: [sda] Write Protect is off
[    2.879009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.879026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.879137] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.884031] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DS8A5SH   XAA2 PQ: 0 ANSI: 5
[    2.889670] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.889680] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.889946] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.890064] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.918440]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    2.919065] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.340124] Refined TSC clocksource calibration: 1995.466 MHz.
[    3.340135] Switching to clocksource tsc
[    3.438461] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    3.471004] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
[    3.473519] registered taskstats version 1
[    3.480543] rtc_cmos 00:06: setting system clock to 2011-10-05 17:12:02 UTC (1317834722)
[    3.483259] Freeing unused kernel memory: 604k freed
[    3.976244] scsi6 : pata_legacy
[    3.976387] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    4.128653] scsi7 : pata_legacy
[    4.128936] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    4.421486] scsi: <fdomain> Detection failed (no card)
[    4.492923] imm: Version 2.05 (for Linux 2.4.0)
[    4.569531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.569563] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.569623] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.569627] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    4.569741] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.569773] ehci_hcd 0000:00:1a.0: debug port 2
[    4.573645] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    4.573664] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
[    4.583765] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.583813] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.583821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.583827] usb usb1: Product: EHCI Host Controller
[    4.583832] usb usb1: Manufacturer: Linux 3.0.0-sabayon ehci_hcd
[    4.583838] usb usb1: SerialNumber: 0000:00:1a.0
[    4.584324] hub 1-0:1.0: USB hub found
[    4.584330] hub 1-0:1.0: 2 ports detected
[    4.584485] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.584502] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.584506] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    4.584576] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.584602] ehci_hcd 0000:00:1d.0: debug port 2
[    4.588473] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    4.588487] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
[    4.597769] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.597826] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.597833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.597840] usb usb2: Product: EHCI Host Controller
[    4.597854] usb usb2: Manufacturer: Linux 3.0.0-sabayon ehci_hcd
[    4.597856] usb usb2: SerialNumber: 0000:00:1d.0
[    4.598395] hub 2-0:1.0: USB hub found
[    4.598401] hub 2-0:1.0: 2 ports detected
[    4.621408] uhci_hcd: USB Universal Host Controller Interface driver
[    4.638118] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.656476] sl811: driver sl811-hcd, 19 May 2005
[    4.858132] JFS: nTxBlock = 8192, nTxLock = 65536
[    4.886620] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    4.901685] RPC: Registered named UNIX socket transport module.
[    4.901688] RPC: Registered udp transport module.
[    4.901689] RPC: Registered tcp transport module.
[    4.901691] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.950536] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    4.951505] SGI XFS Quota Management subsystem
[    4.972308] fuse init (API version 7.16)
[    4.994136] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.994139] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    5.000971] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    5.000975] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.001285] hub 1-1:1.0: USB hub found
[    5.001320] hub 1-1:1.0: 6 ports detected
[    5.039961] iscsi: registered transport (tcp)
[    5.103549] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    5.217889] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    5.217899] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.218376] hub 2-1:1.0: USB hub found
[    5.218496] hub 2-1:1.0: 6 ports detected
[    5.292622] usb 1-1.2: new high speed USB device number 3 using ehci_hcd
[    5.437590] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5710
[    5.437595] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.437597] usb 1-1.2: Product: USB 2.0 UVC VGA WebCam
[    5.437600] usb 1-1.2: Manufacturer: Azurewave
[    5.437601] usb 1-1.2: SerialNumber: 0x0001
[    5.512566] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
[    5.549711] PM: Starting manual resume from disk
[    5.602452] usb 2-1.2: New USB device found, idVendor=192f, idProduct=0416
[    5.602465] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    5.602476] usb 2-1.2: Product: USB Optical Mouse
[    5.605585] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5
[    5.605968] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    5.742144] VFS: could not find a valid V7 on dm-0.
[    5.811307] UDF-fs: No partition found (1)
[    5.819482] hub 2-1:1.0: over-current condition on port 3
[    5.853750] EXT2-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[    5.865008] EXT3-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[    5.910901] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    6.021524] hub 2-1:1.0: over-current condition on port 4
[    7.715731] fbcondecor: switched decor state to 'off' on console 0
[    8.094815] fbcondecor: console 0 using theme 'sabayon'
[    8.194715] fbcondecor: switched decor state to 'on' on console 0
[   11.504143] udevd[5668]: starting version 171
[   14.363647] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[   14.363808] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   14.365298] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[   14.365448] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[   14.403299] iTCO_vendor_support: vendor-support=0
[   14.415017] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   14.466849] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.542230] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   14.542259] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   14.542355] r8169 0000:05:00.0: setting latency timer to 64
[   14.542425] r8169 0000:05:00.0: irq 42 for MSI/MSI-X
[   14.542572] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900057c6000, 14:da:e9:18:74:bd, XID 0c200000 IRQ 42
[   14.567624] cfg80211: Calling CRDA to update world regulatory domain
[   14.614782] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   14.614920] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   14.614994] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.614998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.632093] asus_wmi: ASUS WMI generic driver loaded
[   14.660754] asus_wmi: Initialization: 0x1
[   14.660921] asus_wmi: SFUN value: 0x1a0af7
[   14.661467] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
[   14.663971] asus_wmi: Backlight controlled by ACPI video driver
[   14.668405] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   14.668632] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.668639] mei 0000:00:16.0: setting latency timer to 64
[   14.686260] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   14.686324] xhci_hcd 0000:04:00.0: setting latency timer to 64
[   14.686329] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   14.686387] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[   14.696071] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
[   14.696152] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[   14.696160] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[   14.696168] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[   14.696176] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[   14.696184] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[   14.696192] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[   14.696200] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[   14.696208] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[   14.696360] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   14.696364] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.696367] usb usb3: Product: xHCI Host Controller
[   14.696370] usb usb3: Manufacturer: Linux 3.0.0-sabayon xhci_hcd
[   14.696374] usb usb3: SerialNumber: 0000:04:00.0
[   14.696487] xHCI xhci_add_endpoint called for root hub
[   14.696490] xHCI xhci_check_bandwidth called for root hub
[   14.696539] hub 3-0:1.0: USB hub found
[   14.696549] hub 3-0:1.0: 2 ports detected
[   14.696636] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   14.696667] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[   14.696690] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[   14.696693] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.696695] usb usb4: Product: xHCI Host Controller
[   14.696697] usb usb4: Manufacturer: Linux 3.0.0-sabayon xhci_hcd
[   14.696699] usb usb4: SerialNumber: 0000:04:00.0
[   14.696758] xHCI xhci_add_endpoint called for root hub
[   14.696760] xHCI xhci_check_bandwidth called for root hub
[   14.696783] hub 4-0:1.0: USB hub found
[   14.696791] hub 4-0:1.0: 2 ports detected
[   14.744136] [drm] Initialized drm 1.1.0 20060810
[   14.775341] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   14.775344] iwlagn: Copyright(c) 2003-2011 Intel Corporation
[   14.775397] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   14.775406] iwlagn 0000:03:00.0: setting latency timer to 64
[   14.775474] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C
[   14.795013] iwlagn 0000:03:00.0: device EEPROM VER=0x166, CALIB=0x6
[   14.795015] iwlagn 0000:03:00.0: Device SKU: 0X9
[   14.795017] iwlagn 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[   14.795026] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   14.795103] iwlagn 0000:03:00.0: irq 51 for MSI/MSI-X
[   14.799241] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.799248] i915 0000:00:02.0: setting latency timer to 64
[   14.799454] Linux media interface: v0.10
[   14.813374] Linux video capture interface: v2.00
[   14.854961] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[   14.854967] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.854969] [drm] Driver supports precise vblank timestamp query.
[   14.855039] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   14.855085] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   14.855102] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.855105] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   14.856834] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[   14.862904] ------------[ cut here ]------------
[   14.862906] kernel BUG at drivers/media/media-entity.c:346!
[   14.862909] invalid opcode: 0000 [#1] SMP
[   14.862911] CPU 0
[   14.862913] Modules linked in: uvcvideo(+) videodev media i915(+) iwlagn v4l2_compat_ioctl32 drm_kms_helper drm snd mac80211 xhci_hcd mei(C) asus_nb_wmi mxm_wmi asus_wmi sparse_keymap pci_hotplug iTCO_wdt i2c_algo_bit cfg80211 video r8169 i2c_i801 snd_page_alloc pcspkr iTCO_vendor_support serio_raw intel_agp intel_gtt joydev i2c_core xts gf128mul sha512_generic sha256_generic sha1_generic aes_x86_64 iscsi_tcp tg3 e1000 fuse xfs nfs nfs_acl auth_rpcgss lockd sunrpc jfs reiserfs ext4 jbd2 ext3 jbd ext2 mbcache scsi_wait_scan sl811_hcd ohci_hcd uhci_hcd ehci_hcd sx8 imm parport pata_pcmcia pcmcia
[   14.862952]
[   14.862955] Pid: 5791, comm: modprobe Tainted: G         C  3.0.0-sabayon #1 ASUSTeK Computer Inc. K53SC/K53SC
[   14.862960] RIP: 0010:[<ffffffffa00ead11>]  [<ffffffffa00ead11>] media_entity_create_link+0x2c/0xde [media]
[   14.862967] RSP: 0018:ffff8801c3165ba8  EFLAGS: 00010246
[   14.862969] RAX: ffff8801c46d0800 RBX: ffff8801c46d0870 RCX: 0000000000000000
[   14.862971] RDX: ffff8801c46d1870 RSI: 0000000000000000 RDI: ffff8801c46d0870
[   14.862974] RBP: ffff8801c3165be8 R08: 0000000000000003 R09: ffff8801c26341c0
[   14.862976] R10: ffff8801c5992000 R11: 0000000000010640 R12: ffff8801c46d1870
[   14.862978] R13: 0000000000000000 R14: ffff8801c46d1870 R15: 0000000000000000
[   14.862981] FS:  00007ff6f69c7700(0000) GS:ffff8801cfa00000(0000) knlGS:0000000000000000
[   14.862984] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   14.862986] CR2: 000000000063423f CR3: 00000001c4f99000 CR4: 00000000000406f0
[   14.862988] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   14.862991] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   14.862994] Process modprobe (pid: 5791, threadinfo ffff8801c3164000, task ffff8801c4648d20)
[   14.862996] Stack:
[   14.862997]  ffff8801c3165be8 ffffffffa00eb02f ffff8801c3165be8 ffff8801c46d1800
[   14.863001]  ffff8801c2e991e0 0000000000000000 ffff8801c46d1870 ffff8801c2e991f8
[   14.863004]  ffff8801c3165c38 ffffffffa04232b6 ffff8801c3165c18 ffffffffffffffff
[   14.863008] Call Trace:
[   14.863012]  [<ffffffffa00eb02f>] ? media_entity_init+0x36/0x8e [media]
[   14.863018]  [<ffffffffa04232b6>] uvc_mc_register_entities+0x164/0x1ee [uvcvideo]
[   14.863024]  [<ffffffffa041d842>] uvc_entity_by_id+0x1fb6/0x2047 [uvcvideo]
[   14.863029]  [<ffffffff812f8c55>] ? rpm_resume+0x84/0x397
[   14.863034]  [<ffffffff8158855a>] usb_probe_interface+0x10c/0x17c
[   14.863039]  [<ffffffff812f2329>] driver_probe_device+0xb2/0x14c
[   14.863042]  [<ffffffff812f241b>] __driver_attach+0x58/0x7c
[   14.863046]  [<ffffffff812f23c3>] ? driver_probe_device+0x14c/0x14c
[   14.863049]  [<ffffffff812f15a0>] bus_for_each_dev+0x51/0x7d
[   14.863053]  [<ffffffff812f2003>] driver_attach+0x19/0x1b
[   14.863056]  [<ffffffff812f1c6f>] bus_add_driver+0xbf/0x210
[   14.863059]  [<ffffffff812f28fe>] driver_register+0x96/0x103
[   14.863063]  [<ffffffff81587787>] usb_register_driver+0x8f/0x139
[   14.863067]  [<ffffffffa0150000>] ? 0xffffffffa014ffff
[   14.863071]  [<ffffffffa0150023>] init_module+0x23/0x3e [uvcvideo]
[   14.863075]  [<ffffffff810002e5>] do_one_initcall+0x7a/0x129
[   14.863079]  [<ffffffff810652cd>] sys_init_module+0x83/0x1cb
[   14.863083]  [<ffffffff816ec73b>] system_call_fastpath+0x16/0x1b
[   14.863085] Code: 48 89 e5 41 57 41 89 cf 41 56 41 55 41 54 49 89 d4 53 48 89 fb 48 83 ec 18 48 85 d2 74 05 48 85 ff 75 02 0f 0b 66 3b 77 3c 72 02 <0f> 0b 66 3b 4a 3c 72 02 0f 0b 89 75 c8 44 89 45 c0 41 be f4 ff
[   14.863110] RIP  [<ffffffffa00ead11>] media_entity_create_link+0x2c/0xde [media]
[   14.863115]  RSP <ffff8801c3165ba8>
[   14.863118] ---[ end trace 21948517d536d054 ]---
[   14.901047] Error: Driver 'pcspkr' is already registered, aborting...
[   14.980868] iwlagn 0000:03:00.0: loaded firmware version 39.31.5.1 build 32895
[   14.980971] Registered led device: phy0-led
[   14.981042] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.066075] checking generic (b0000000 180000) vs hw (b0000000 10000000)
[   15.066079] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   15.066107] Console: switching to colour dummy device 80x25
[   15.066422] fbcon: inteldrmfb (fb0) is primary device
[   15.225073] Console: switching to colour frame buffer device 170x48
[   15.228571] fb0: inteldrmfb frame buffer device
[   15.228572] drm: registered panic notifier
[   15.229716] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[   15.230031] acpi device:51: registered as cooling_device8
[   15.230125] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input8
[   15.230190] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   15.240817] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[   15.241147] acpi device:53: registered as cooling_device9
[   15.241431] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[   15.241484] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.241559] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.241603] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.241707] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[   15.241743] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.249487] nvidia: module license 'NVIDIA' taints kernel.
[   15.633701] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   15.633706] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   15.633711] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[   15.633719] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.633727] nvidia 0000:01:00.0: setting latency timer to 64
[   15.633732] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   15.633905] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
[   15.800544] hda_codec: ALC269VB: BIOS auto-probing.
[   15.804333] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[   15.806719] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.806779] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   15.806833] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   74.788233] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   74.989818] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   75.067979] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: user_xattr
[   78.555177] fbcondecor: console 0 using theme 'sabayon'
[   78.637705] fbcondecor: switched decor state to 'on' on console 0
[   78.685386] fbcondecor: console 1 using theme 'sabayon'
[   78.730911] fbcondecor: switched decor state to 'on' on console 1
[   78.778137] fbcondecor: console 2 using theme 'sabayon'
[   78.823640] fbcondecor: switched decor state to 'on' on console 2
[   78.871245] fbcondecor: console 3 using theme 'sabayon'
[   78.916730] fbcondecor: switched decor state to 'on' on console 3
[   78.964328] fbcondecor: console 4 using theme 'sabayon'
[   79.009777] fbcondecor: switched decor state to 'on' on console 4
[   79.057064] fbcondecor: console 5 using theme 'sabayon'
[   79.102682] fbcondecor: switched decor state to 'on' on console 5
[   79.150357] fbcondecor: console 6 using theme 'sabayon'
[   79.195711] fbcondecor: switched decor state to 'on' on console 6
[   79.242947] fbcondecor: console 7 using theme 'sabayon'
[   79.288249] fbcondecor: switched decor state to 'on' on console 7
[   79.335608] fbcondecor: console 8 using theme 'sabayon'
[   79.381299] fbcondecor: switched decor state to 'on' on console 8
[   79.428551] fbcondecor: console 9 using theme 'sabayon'
[   79.473921] fbcondecor: switched decor state to 'on' on console 9
[   79.521210] fbcondecor: console 10 using theme 'sabayon'
[   79.566640] fbcondecor: switched decor state to 'on' on console 10
[   79.613932] fbcondecor: console 11 using theme 'sabayon'
[   79.659431] fbcondecor: switched decor state to 'on' on console 11
[   84.142191] r8169 0000:05:00.0: eth0: link down
[   84.552770] NET: Registered protocol family 10
[   84.553103] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   84.553128] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   86.470092] wlan0: authenticate with 00:1e:2a:f5:b2:8a (try 1)
[   86.474313] wlan0: authenticated
[   86.487522] wlan0: associate with 00:1e:2a:f5:b2:8a (try 1)
[   86.490949] wlan0: RX AssocResp from 00:1e:2a:f5:b2:8a (capab=0x411 status=0 aid=3)
[   86.490961] wlan0: associated
[   86.497356] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   87.779371] Adding 8126460k swap on /dev/mapper/vg_sabayon-lv_swap.  Priority:-1 extents:1 across:8126460k
[   96.568426] wlan0: no IPv6 routers present
[  114.155894] ata1.00: configured for UDMA/133
[  114.155898] ata1: EH complete
[  115.077342] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[  115.082264] EXT4-fs (sda3): re-mounted. Opts: commit=0
[  115.392251] EXT4-fs (dm-1): re-mounted. Opts: user_xattr,commit=0
[  142.130980] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[  219.981389] fbcondecor: switched decor state to 'off' on console 11
[  220.030269] fbcondecor: console 11 using theme 'sabayon'
[  220.057891] fbcondecor: switched decor state to 'on' on console 11
[  238.191951] fbcondecor: switched decor state to 'off' on console 11
[  238.243568] fbcondecor: console 11 using theme 'sabayon'
[  238.271121] fbcondecor: switched decor state to 'on' on console 11
[  298.117020] chrome_sandbox (8314): /proc/8312/oom_adj is deprecated, please use /proc/8312/oom_score_adj instead.
[  334.811897] fbcondecor: switched decor state to 'off' on console 11
[  334.863339] fbcondecor: console 11 using theme 'sabayon'
[  334.891489] fbcondecor: switched decor state to 'on' on console 11
[  417.517270] fbcondecor: switched decor state to 'off' on console 11
[  417.567514] fbcondecor: console 11 using theme 'sabayon'
[  417.595439] fbcondecor: switched decor state to 'on' on console 11
[ 1049.389216] libfcoe_device_notification: NETDEV_UNREGISTER lo
[ 1156.416039] usb 3-1: new full speed USB device number 2 using xhci_hcd
[ 1156.430898] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1156.431090] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1156.431640] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1156.431842] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1156.431866] usb 3-1: New USB device found, idVendor=066f, idProduct=8000
[ 1156.431873] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1156.431880] usb 3-1: Product: <USB PRODUCT>   
[ 1156.431885] usb 3-1: Manufacturer: <USB MF>
[ 1156.431889] usb 3-1: SerialNumber: 23DE907A91648417
[ 1156.433483] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1156.433699] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1156.434009] scsi8 : usb-storage 3-1:1.0
[ 1158.002362] scsi 8:0:0:0: Direct-Access     SigmaTel MSCN             0100 PQ: 0 ANSI: 4
[ 1158.124022] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 1158.124480] sd 8:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1158.124807] sd 8:0:0:0: [sdb] Write Protect is off
[ 1158.124815] sd 8:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1158.125151] sd 8:0:0:0: [sdb] No Caching mode page present
[ 1158.125156] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1158.126097] sd 8:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1158.126772] sd 8:0:0:0: [sdb] No Caching mode page present
[ 1158.126778] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1158.130952]  sdb: sdb1
[ 1158.132386] sd 8:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1158.133067] sd 8:0:0:0: [sdb] No Caching mode page present
[ 1158.133073] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1158.133079] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 1169.875544] fbcondecor: switched decor state to 'off' on console 11
[ 1169.927852] fbcondecor: console 11 using theme 'sabayon'
[ 1169.955955] fbcondecor: switched decor state to 'on' on console 11
[ 1197.406043] usb 3-1: USB disconnect, device number 2
[ 1210.196928] usb 3-1: new full speed USB device number 3 using xhci_hcd
[ 1210.211846] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1210.212131] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1210.212380] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1210.212568] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1210.212588] usb 3-1: New USB device found, idVendor=066f, idProduct=8000
[ 1210.212596] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1210.212602] usb 3-1: Product: <USB PRODUCT>   
[ 1210.212607] usb 3-1: Manufacturer: <USB MF>
[ 1210.212611] usb 3-1: SerialNumber: 23DE907A91648417
[ 1210.214122] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1210.214372] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1210.214746] scsi9 : usb-storage 3-1:1.0
[ 1211.783652] scsi 9:0:0:0: Direct-Access     SigmaTel MSCN             0100 PQ: 0 ANSI: 4
[ 1211.904896] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 1211.905336] sd 9:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1211.905667] sd 9:0:0:0: [sdb] Write Protect is off
[ 1211.905674] sd 9:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1211.906017] sd 9:0:0:0: [sdb] No Caching mode page present
[ 1211.906022] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 1211.907123] sd 9:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1211.907771] sd 9:0:0:0: [sdb] No Caching mode page present
[ 1211.907777] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 1211.911934]  sdb: sdb1
[ 1211.913202] sd 9:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1211.913905] sd 9:0:0:0: [sdb] No Caching mode page present
[ 1211.913913] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 1211.913919] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 1299.158183] usb 3-1: USB disconnect, device number 3
[ 1408.094914] usb 3-1: new full speed USB device number 4 using xhci_hcd
[ 1408.109820] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1408.110088] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1408.110276] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1408.110483] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1408.110507] usb 3-1: New USB device found, idVendor=066f, idProduct=8000
[ 1408.110515] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1408.110521] usb 3-1: Product: <USB PRODUCT>   
[ 1408.110526] usb 3-1: Manufacturer: <USB MF>
[ 1408.110530] usb 3-1: SerialNumber: 23DE907A91648417
[ 1408.112034] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1408.112271] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 1408.112533] scsi10 : usb-storage 3-1:1.0
[ 1409.681786] scsi 10:0:0:0: Direct-Access     SigmaTel MSCN             0100 PQ: 0 ANSI: 4
[ 1409.802778] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 1409.803244] sd 10:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1409.803594] sd 10:0:0:0: [sdb] Write Protect is off
[ 1409.803604] sd 10:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 1409.803953] sd 10:0:0:0: [sdb] No Caching mode page present
[ 1409.803960] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 1409.805063] sd 10:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1409.805856] sd 10:0:0:0: [sdb] No Caching mode page present
[ 1409.805862] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 1409.810039]  sdb: sdb1
[ 1409.811430] sd 10:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 1409.812279] sd 10:0:0:0: [sdb] No Caching mode page present
[ 1409.812287] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 1409.812293] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 1460.508449] fbcondecor: switched decor state to 'off' on console 11
[ 1460.556552] fbcondecor: console 11 using theme 'sabayon'
[ 1460.623433] fbcondecor: switched decor state to 'on' on console 11
[ 2249.188249] usb 3-1: USB disconnect, device number 4
[ 2784.913565] usb 3-1: new full speed USB device number 5 using xhci_hcd
[ 2784.928501] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 2784.928784] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 2784.928971] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 2784.929166] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 2784.929186] usb 3-1: New USB device found, idVendor=066f, idProduct=8000
[ 2784.929193] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2784.929199] usb 3-1: Product: <USB PRODUCT>   
[ 2784.929204] usb 3-1: Manufacturer: <USB MF>
[ 2784.929209] usb 3-1: SerialNumber: 23DE907A91648417
[ 2784.930698] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 2784.930916] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 2784.931174] scsi11 : usb-storage 3-1:1.0
[ 2786.505347] scsi 11:0:0:0: Direct-Access     SigmaTel MSCN             0100 PQ: 0 ANSI: 4
[ 2786.626425] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 2786.626928] sd 11:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 2786.627294] sd 11:0:0:0: [sdb] Write Protect is off
[ 2786.627302] sd 11:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 2786.627636] sd 11:0:0:0: [sdb] No Caching mode page present
[ 2786.627641] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 2786.628877] sd 11:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 2786.629537] sd 11:0:0:0: [sdb] No Caching mode page present
[ 2786.629544] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 2786.633736]  sdb: sdb1
[ 2786.635041] sd 11:0:0:0: [sdb] 511744 2048-byte logical blocks: (1.04 GB/999 MiB)
[ 2786.635716] sd 11:0:0:0: [sdb] No Caching mode page present
[ 2786.635722] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 2786.635728] sd 11:0:0:0: [sdb] Attached SCSI removable disk
MattyC.
Baby Hen
 
Posts: 8
Joined: Sat Feb 20, 2010 16:26

Re: Unable to recognize USB devices

Postby DanySK » Thu Oct 06, 2011 8:52

http://www.spinics.net/lists/hotplug/msg03916.html

It seems to be a problem at the kernel level.
User avatar
DanySK
Technological Hen
 
Posts: 354
Joined: Tue May 22, 2007 10:18
Location: Pennabilli - Cesena

Re: Unable to recognize USB devices

Postby MattyC. » Thu Oct 06, 2011 17:50

problem solved: I switched back to an older kernel (from 3.0 to 2.6.39) using kernel switcher and the problem dissapear.

Thank you everyone! :)
MattyC.
Baby Hen
 
Posts: 8
Joined: Sat Feb 20, 2010 16:26


Return to Hardware

Who is online

Users browsing this forum: No registered users and 4 guests

cron