Huawei E160 Mobile Broadband Modem [Solved]

Issues Related to Networking (Wired and Wireless)

Moderator: Moderators

Huawei E160 Mobile Broadband Modem [Solved]

Postby mikefox7 » Fri Sep 24, 2010 20:55

Hello, please help me someone!

After a fresh sabayon 5.3-amd64 gnome install, my huawei e160 perfectly connects to the internet.
Then, after upgrading all to the actual versions, it's impossible to connect via mobile broadband again.
Maybe the failure is because of the ppp-update, which has been played in then?!

I simply do not know what to change, that my huawei would connect again.
mikefox7
Baby Hen
 
Posts: 9
Joined: Wed Jan 24, 2007 5:29

Re: Huawei E160 Mobile Broadband Modem

Postby Fitzcarraldo » Sat Sep 25, 2010 1:40

Do yuo get any error messages? Try the following command as root user in a Konsole/Terminal window without the modem plugged in:

Code: Select all
dmesg

and then plug in the modem and repeat the above command and post here the new stuff at the end.

Also have a look in the lof file /var/log/messages and see if there are any error messages in there from the date/time when you started seeing the problem. Post any error messages here too.

Also post the output from the following commands entered as the root user:

Code: Select all
lspci
lsusb -v
lsmod
uname -a
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7998
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: Huawei E160 Mobile Broadband Modem

Postby mikefox7 » Sat Sep 25, 2010 14:26

Hello Fitzcarraldo,

at first thank you for your answer!

Here now are the messages I got after the requested commands:

Code: Select all
 [  664.273014] usb 1-1: new high speed USB device using ehci_hcd and address 3
 [  664.399257] usb 1-1: New USB device found, idVendor=12d1, idProduct=1003
 [  664.399261] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
 [  664.399263] usb 1-1: Product: HUAWEI Mobile
 [  664.399265] usb 1-1: Manufacturer: HUAWEI Technology
[  664.401409] scsi10 : usb-storage 1-1:1.0
 [  664.401912] usb 1-1: USB disconnect, address 3
 [  670.104016] usb 1-1: new high speed USB device using ehci_hcd and address 4
 [  670.230205] usb 1-1: New USB device found, idVendor=12d1, idProduct=1003
 [  670.230208] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
 [  670.230211] usb 1-1: Product: HUAWEI Mobile
 [  670.230212] usb 1-1: Manufacturer: HUAWEI Technology
 [  670.233224] scsi13 : usb-storage 1-1:1.2
 [  670.234347] scsi14 : usb-storage 1-1:1.3
 [  670.281630] usbcore: registered new interface driver usbserial
 [  670.281661] USB Serial support registered for generic
 [  670.281693] usbcore: registered new interface driver usbserial_generic
 [  670.281694] usbserial: USB Serial Driver core
 [  670.298276] USB Serial support registered for GSM modem (1-port)
 [  670.298325] option 1-1:1.0: GSM modem (1-port) converter detected
 [  670.298553] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
 [  670.298568] option 1-1:1.1: GSM modem (1-port) converter detected
 [  670.298632] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
 [  670.298652] usbcore: registered new interface driver option
 [  670.298654] option: v0.7.2:USB Driver for GSM modems
 [  671.236469] scsi 13:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
 [  671.238463] scsi 14:0:0:0: Direct-Access     HUAWEI   MMC Storage      2.31 PQ: 0 ANSI: 2
 [  671.257207] sr2: scsi-1 drive
 [  671.257292] sr 13:0:0:0: Attached scsi CD-ROM sr2
 [  671.257416] sr 13:0:0:0: Attached scsi generic sg5 type 5
 [  671.257693] sd 14:0:0:0: Attached scsi generic sg6 type 0
 [  671.266338] sd 14:0:0:0: [sdd] Attached SCSI removable disk
 [  677.881104] sd 14:0:0:0: [sdd] 15954944 512-byte logical blocks: (8.16 GB/7.60 GiB)
 [  677.884225] sd 14:0:0:0: [sdd] Assuming drive cache: write through
 [  677.893975] sd 14:0:0:0: [sdd] Assuming drive cache: write through
 [  677.893979]  sdd: sdd1

Code: Select all
[email protected] ~ $  sudo lspci
00:00.0 Host bridge: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C)
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b1)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
04:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)
05:06.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)

Code: Select all
[email protected] ~ $  sudo lsusb -v
  PortPwrCtrlMask    0xff
Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0303 lowspeed power enable connect
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.35-sabayon ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:13.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.35-sabayon ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:13.4
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.35-sabayon ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:13.3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x12d1 Huawei Technologies Co., Ltd.
  idProduct          0x1003 E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
  bcdDevice            0.00
  iManufacturer           2 HUAWEI Technology
  iProduct                1 HUAWEI Mobile
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          108
    bNumInterfaces          4
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              32
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.35-sabayon ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:13.5
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts            10
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0100 power
   Port 9: 0000.0100 power
   Port 10: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.35-sabayon ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:13.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0012
    No power switching (usb 1.0)
    No overcurrent protection
  bPwrOn2PwrGood        2 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Code: Select all
[email protected] ~ $  sudo lsmod
Passwort:
Module                  Size  Used by
option                 14965  0
usb_wwan                7337  1 option
usbserial              26382  2 option,usb_wwan
ipv6                  238176  28
snd_seq_dummy           1142  0
snd_seq_oss            22175  0
snd_seq_midi_event      4141  1 snd_seq_oss
snd_seq                38483  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          4099  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            29511  0
snd_mixer_oss          11023  1 snd_pcm_oss
vboxdrv              1722000  0
saa7134_alsa            8488  1
tda1004x               11743  1
saa7134_dvb            18334  0
videobuf_dvb            4069  1 saa7134_dvb
dvb_core               73193  1 videobuf_dvb
rc_hauppauge_new        1182  0
ir_kbd_i2c              4414  0
tda827x                 7542  2
tda8290                11388  1
tuner                  16021  1
snd_hda_codec_analog    62494  1
ir_sony_decoder         2622  0
saa7134               142718  2 saa7134_alsa,saa7134_dvb
ir_jvc_decoder          2723  0
nvidia              11076849  24
ir_rc6_decoder          3118  0
ir_rc5_decoder          2686  0
snd_hda_intel          18485  2
v4l2_common            13149  2 tuner,saa7134
videodev               36301  3 tuner,saa7134,v4l2_common
v4l1_compat            10322  1 videodev
v4l2_compat_ioctl32     9411  1 videodev
videobuf_dma_sg         7016  3 saa7134_alsa,saa7134_dvb,saa7134
videobuf_core          12493  3 videobuf_dvb,saa7134,videobuf_dma_sg
snd_hda_codec          61174  2 snd_hda_codec_analog,snd_hda_intel
tpm_tis                 6885  0
ir_nec_decoder          2878  0
ir_common               3737  2 ir_kbd_i2c,saa7134
ir_core                 9639  10 rc_hauppauge_new,ir_kbd_i2c,ir_sony_decoder,saa7134,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,ir_common
tveeprom               12471  1 saa7134
sky2                   41456  0
snd_hwdep               4492  1 snd_hda_codec
snd_pcm                55189  4 snd_pcm_oss,saa7134_alsa,snd_hda_intel,snd_hda_codec
snd_timer              14084  2 snd_seq,snd_pcm
snd                    42922  18 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,saa7134_alsa,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
serio_raw               3383  0
pcspkr                  1534  0
asus_atk0110            7838  0
i2c_piix4               8381  0
tpm                     9435  1 tpm_tis
k10temp                 2549  0
snd_page_alloc          5891  2 snd_hda_intel,snd_pcm
tpm_bios                3904  1 tpm
i2c_core               14468  12 tda1004x,saa7134_dvb,ir_kbd_i2c,tda827x,tda8290,tuner,saa7134,nvidia,v4l2_common,videodev,tveeprom,i2c_piix4
edac_core              26329  0
xts                     2311  0
gf128mul                7391  1 xts
iscsi_tcp               8954  0
tg3                   113477  0
e1000                  92014  0
scsi_wait_scan           741  0
sl811_hcd               9044  0
ohci_hcd               19363  0
uhci_hcd               18965  0
ehci_hcd               32566  0
sx8                    12186  0
imm                     9013  0
parport                31567  1 imm
pata_pcmcia            10234  0
pcmcia                 32919  1 pata_pcmcia

Code: Select all
[email protected] ~ $ sudo uname -a
Passwort:
Linux sabayon-box 2.6.35-sabayon #1 SMP Sun Sep 19 16:34:03 UTC 2010 x86_64 AMD Phenom(tm) 9850 Quad-Core Processor AuthenticAMD GNU/Linux
[email protected] ~ $


I hope this leads to a solution of the problem, thanks in advance again, regards mikefox7
mikefox7
Baby Hen
 
Posts: 9
Joined: Wed Jan 24, 2007 5:29

Re: Huawei E160 Mobile Broadband Modem

Postby Fitzcarraldo » Sat Sep 25, 2010 15:14

Please use the Code button around console output, otherwise lengthy pasted output requires a lot of scrolling up and down a page. Also, please strip out blank lines between individual lines so that it looks like it did on the console (I used Word 2007 and replaced ^p^p with ^p in your post). Anyway, now it is readable.

I cannot see any errors in what you have posted. Please have a look in the file /var/log/messages for messages around the date and time that the problem started, and post the error messages here. Also, how is the modem configured in NetworkManager? Into which fields have you entered values, and which boxes are ticked? I set mine up as follows for another network: Qtel mobile broadband HUAWEI E220 USB modem [Solved] (the lsusb output you posted shows your modem as "idProduct 0x1003 E220 HSDPA Modem / E270 HSDPA/HSUPA Modem", so perhaps the setup is similar to the E220 that I use).

It's a very long shot, but perform the edit in the following post too: Re: Set up system time.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7998
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: Huawei E160 Mobile Broadband Modem

Postby mikefox7 » Sat Sep 25, 2010 18:21

Here is the end of the file "messages" after plugging in the modem and a new try to connect:

Code: Select all
Sep 25 19:00:01 localhost cron[9722]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Sep 25 19:00:01 localhost cron[9723]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly)
Sep 25 19:00:37 localhost sudo: guppy-lanzelot : TTY=pts/0 ; PWD=/home/guppy-lanzelot ; USER=root ; COMMAND=/usr/bin/nautilus
Sep 25 19:00:37 localhost sudo: pam_unix(sudo:session): session opened for user root by guppy-lanzelot(uid=0)
Sep 25 19:01:17 localhost kernel: [ 2423.974016] usb 1-1: new high speed USB device using ehci_hcd and address 3
Sep 25 19:01:17 localhost kernel: [ 2424.100285] usb 1-1: New USB device found, idVendor=12d1, idProduct=1003
Sep 25 19:01:17 localhost kernel: [ 2424.100288] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
Sep 25 19:01:17 localhost kernel: [ 2424.100291] usb 1-1: Product: HUAWEI Mobile
Sep 25 19:01:17 localhost kernel: [ 2424.100292] usb 1-1: Manufacturer: HUAWEI Technology
Sep 25 19:01:17 localhost kernel: [ 2424.102309] scsi10 : usb-storage 1-1:1.0
Sep 25 19:01:17 localhost kernel: [ 2424.102690] usb 1-1: USB disconnect, address 3
Sep 25 19:01:23 localhost kernel: [ 2429.792014] usb 1-1: new high speed USB device using ehci_hcd and address 4
Sep 25 19:01:23 localhost kernel: [ 2429.918258] usb 1-1: New USB device found, idVendor=12d1, idProduct=1003
Sep 25 19:01:23 localhost kernel: [ 2429.918261] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
Sep 25 19:01:23 localhost kernel: [ 2429.918264] usb 1-1: Product: HUAWEI Mobile
Sep 25 19:01:23 localhost kernel: [ 2429.918266] usb 1-1: Manufacturer: HUAWEI Technology
Sep 25 19:01:23 localhost kernel: [ 2429.921280] scsi13 : usb-storage 1-1:1.2
Sep 25 19:01:23 localhost kernel: [ 2429.922403] scsi14 : usb-storage 1-1:1.3
Sep 25 19:01:23 localhost kernel: [ 2430.046238] usbcore: registered new interface driver usbserial
Sep 25 19:01:23 localhost kernel: [ 2430.046250] USB Serial support registered for generic
Sep 25 19:01:23 localhost kernel: [ 2430.046297] usbcore: registered new interface driver usbserial_generic
Sep 25 19:01:23 localhost kernel: [ 2430.046298] usbserial: USB Serial Driver core
Sep 25 19:01:23 localhost kernel: [ 2430.054845] USB Serial support registered for GSM modem (1-port)
Sep 25 19:01:23 localhost kernel: [ 2430.054898] option 1-1:1.0: GSM modem (1-port) converter detected
Sep 25 19:01:23 localhost kernel: [ 2430.055156] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Sep 25 19:01:23 localhost kernel: [ 2430.055169] option 1-1:1.1: GSM modem (1-port) converter detected
Sep 25 19:01:23 localhost kernel: [ 2430.055236] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Sep 25 19:01:23 localhost kernel: [ 2430.055256] usbcore: registered new interface driver option
Sep 25 19:01:23 localhost kernel: [ 2430.055258] option: v0.7.2:USB Driver for GSM modems
Sep 25 19:01:23 localhost modem-manager: (Huawei): (ttyUSB1) deferring support check
Sep 25 19:01:23 localhost modem-manager: (ttyUSB0) opening serial device...
Sep 25 19:01:23 localhost modem-manager: (ttyUSB0): probe requested by plugin 'Huawei'
Sep 25 19:01:24 localhost kernel: [ 2430.924448] scsi 13:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Sep 25 19:01:24 localhost kernel: [ 2430.928334] scsi 14:0:0:0: Direct-Access     HUAWEI   MMC Storage      2.31 PQ: 0 ANSI: 2
Sep 25 19:01:24 localhost kernel: [ 2430.945185] sr2: scsi-1 drive
Sep 25 19:01:24 localhost kernel: [ 2430.945291] sr 13:0:0:0: Attached scsi CD-ROM sr2
Sep 25 19:01:24 localhost kernel: [ 2430.945442] sr 13:0:0:0: Attached scsi generic sg5 type 5
Sep 25 19:01:24 localhost kernel: [ 2430.945752] sd 14:0:0:0: Attached scsi generic sg6 type 0
Sep 25 19:01:24 localhost kernel: [ 2430.955313] sd 14:0:0:0: [sdd] Attached SCSI removable disk
Sep 25 19:01:24 localhost modem-manager: Got failure code 14: SIM busy
Sep 25 19:01:25 localhost modem-manager: (ttyUSB0) closing serial device...
Sep 25 19:01:25 localhost modem-manager: (ttyUSB0) opening serial device...
Sep 25 19:01:25 localhost modem-manager: (Huawei): GSM modem /sys/devices/pci0000:00/0000:00:13.5/usb1/1-1 claimed port ttyUSB0
Sep 25 19:01:25 localhost modem-manager: Added modem /sys/devices/pci0000:00/0000:00:13.5/usb1/1-1
Sep 25 19:01:25 localhost modem-manager: (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:13.5/usb1/1-1
Sep 25 19:01:25 localhost modem-manager: (tty/ttyUSB1): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:13.5/usb1/1-1
Sep 25 19:01:25 localhost modem-manager: (ttyUSB0) closing serial device...
Sep 25 19:01:25 localhost modem-manager: (tty/ttyUSB1): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:13.5/usb1/1-1
Sep 25 19:01:26 localhost modem-manager: (ttyUSB1): re-checking support...
Sep 25 19:01:26 localhost modem-manager: (ttyUSB1) opening serial device...
Sep 25 19:01:31 localhost kernel: [ 2437.823939] sd 14:0:0:0: [sdd] 15954944 512-byte logical blocks: (8.16 GB/7.60 GiB)
Sep 25 19:01:31 localhost kernel: [ 2437.827312] sd 14:0:0:0: [sdd] Assuming drive cache: write through
Sep 25 19:01:31 localhost kernel: [ 2437.837060] sd 14:0:0:0: [sdd] Assuming drive cache: write through
Sep 25 19:01:31 localhost kernel: [ 2437.837064]  sdd: sdd1
Sep 25 19:01:31 localhost modem-manager: (ttyUSB1) closing serial device...
Sep 25 19:01:31 localhost modem-manager: (Huawei): GSM modem /sys/devices/pci0000:00/0000:00:13.5/usb1/1-1 claimed port ttyUSB1
Sep 25 19:01:31 localhost modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:13.5/usb1/1-1 as /org/freedesktop/ModemManager/Modems/0
Sep 25 19:01:31 localhost modem-manager: (/org/freedesktop/ModemManager/Modems/0): data port is ttyUSB0
Sep 25 19:01:31 localhost NetworkManager: <info>  (ttyUSB0): new GSM device (driver: 'option1')
Sep 25 19:01:31 localhost NetworkManager: <info>  (ttyUSB0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep 25 19:01:31 localhost NetworkManager: <info>  (ttyUSB0): now managed
Sep 25 19:01:31 localhost NetworkManager: <info>  (ttyUSB0): device state change: 1 -> 2 (reason 2)
Sep 25 19:01:31 localhost NetworkManager: <info>  (ttyUSB0): deactivating device (reason: 2).
Sep 25 19:01:31 localhost NetworkManager: <info>  (ttyUSB0): device state change: 2 -> 3 (reason 0)
Sep 25 19:03:25 localhost NetworkManager: <info>  Activation (ttyUSB0) starting connection 'o2'
Sep 25 19:03:25 localhost NetworkManager: <info>  (ttyUSB0): device state change: 3 -> 4 (reason 0)
Sep 25 19:03:25 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 25 19:03:25 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
Sep 25 19:03:25 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete.
Sep 25 19:03:25 localhost modem-manager: (ttyUSB0) opening serial device...
Sep 25 19:03:25 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling)
Sep 25 19:03:26 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled)
Sep 25 19:03:26 localhost modem-manager: Registration state changed: 1
Sep 25 19:03:26 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> registered)
Sep 25 19:03:26 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/0: state changed (registered -> connecting)
Sep 25 19:03:26 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/0: state changed (connecting -> connected)
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 2 of 5 (Device Configure) scheduled...
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 2 of 5 (Device Configure) starting...
Sep 25 19:03:26 localhost NetworkManager: <info>  (ttyUSB0): device state change: 4 -> 5 (reason 0)
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 2 of 5 (Device Configure) successful.
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 3 of 5 (IP Configure Start) scheduled.
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 2 of 5 (Device Configure) complete.
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 3 of 5 (IP Configure Start) started...
Sep 25 19:03:26 localhost NetworkManager: <info>  (ttyUSB0): device state change: 5 -> 7 (reason 0)
Sep 25 19:03:26 localhost kernel: [ 2553.177360] PPP generic driver version 2.4.2
Sep 25 19:03:26 localhost NetworkManager: <info>  Starting pppd connection
Sep 25 19:03:26 localhost NetworkManager: <debug> [1285434206.385299] nm_ppp_manager_start(): Command line: /usr/sbin/pppd nodetach lock nodefaultroute ttyUSB0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib64/pppd/2.4.4/nm-pppd-plugin.so
Sep 25 19:03:26 localhost NetworkManager: <debug> [1285434206.402762] nm_ppp_manager_start(): ppp started with pid 9843
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 3 of 5 (IP Configure Start) complete.
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 4 of 5 (IP6 Configure Get) started...
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 4 of 5 (IP6 Configure Get) complete.
Sep 25 19:03:26 localhost pppd[9843]: Plugin /usr/lib64/pppd/2.4.4/nm-pppd-plugin.so is for pppd version 2.4.4, this is 2.4.5
Sep 25 19:03:26 localhost NetworkManager: <WARN>  ppp_exit_code(): ppp pid 9843 exited with error: pppd options error
Sep 25 19:03:26 localhost NetworkManager: <debug> [1285434206.442120] ppp_watch_cb(): ppp pid 9843 cleaned up
Sep 25 19:03:26 localhost NetworkManager: <info>  (ttyUSB0): device state change: 7 -> 9 (reason 14)
Sep 25 19:03:26 localhost NetworkManager: <info>  Marking connection 'o2' invalid.
Sep 25 19:03:26 localhost NetworkManager: <info>  Activation (ttyUSB0) failed.
Sep 25 19:03:26 localhost NetworkManager: <info>  (ttyUSB0): device state change: 9 -> 3 (reason 0)
Sep 25 19:03:26 localhost NetworkManager: <info>  (ttyUSB0): deactivating device (reason: 0).
Sep 25 19:03:26 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
Sep 25 19:03:26 localhost NetworkManager: <info>  (eth0): writing resolv.conf to /sbin/resolvconf
Sep 25 19:03:26 localhost NetworkManager: <info>  Clearing nscd hosts cache.
Sep 25 19:03:26 localhost NetworkManager: <info>  Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Sep 25 19:03:30 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> registered)
Sep 25 19:03:41 localhost NetworkManager: <info>  Activation (ttyUSB0) starting connection 'o2'
Sep 25 19:03:41 localhost NetworkManager: <info>  (ttyUSB0): device state change: 3 -> 4 (reason 0)
Sep 25 19:03:41 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 25 19:03:41 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
Sep 25 19:03:41 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete.
Sep 25 19:04:02 localhost NetworkManager: <WARN>  stage1_prepare_done(): GSM modem connection failed: (32) Serial command timed out
Sep 25 19:04:02 localhost NetworkManager: <info>  (ttyUSB0): device state change: 4 -> 9 (reason 1)
Sep 25 19:04:02 localhost NetworkManager: <info>  Marking connection 'o2' invalid.
Sep 25 19:04:02 localhost NetworkManager: <info>  Activation (ttyUSB0) failed.
Sep 25 19:04:02 localhost NetworkManager: <info>  (ttyUSB0): device state change: 9 -> 3 (reason 0)
Sep 25 19:04:02 localhost NetworkManager: <info>  (ttyUSB0): deactivating device (reason: 0).
Sep 25 19:04:02 localhost NetworkManager: <info>  (eth0): writing resolv.conf to /sbin/resolvconf
Sep 25 19:04:02 localhost NetworkManager: <info>  Clearing nscd hosts cache.
Sep 25 19:04:02 localhost NetworkManager: <info>  Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Sep 25 19:10:01 localhost cron[9932]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Sep 25 19:10:01 localhost run-crons[9941]: (root) CMD (/etc/cron.daily/logrotate.cron)
Sep 25 19:10:02 localhost run-crons[9946]: (root) CMD (/etc/cron.daily/makewhatis)
Sep 25 19:10:15 localhost sSMTP[9944]: Unable to locate mail
Sep 25 19:10:15 localhost sSMTP[9944]: Cannot open mail:25
Sep 25 19:10:15 localhost cron[9931]: (root) MAIL (mailed 439 bytes of output but got status 0x0001
Sep 25 19:10:15 localhost )


When I try to connect with the huawei modem, I do not get any explicit error messages, it simply does not connect!

Regarding Networkmanager: the only thing I changed was to put in the right apn (in my case "webmobil1"), pin query is deactivated. All other entries were being unchanged and this works fine in other linux distros, e.g. ubuntu, fedora or opensuse.
mikefox7
Baby Hen
 
Posts: 9
Joined: Wed Jan 24, 2007 5:29

Re: Huawei E160 Mobile Broadband Modem

Postby Fitzcarraldo » Sat Sep 25, 2010 19:09

Fitzcarraldo wrote:Please use the Code button around console output

I've fixed your latest post to include the 'Code' BBCode (see the Code button at the top of the box where you type your post).

Looking through the output from your /var/log/messages file, you can clearly see that there is a problem. It looks like the problem starts at the following point:

Code: Select all
Sep 25 19:03:26 localhost pppd[9843]: Plugin  /usr/lib64/pppd/2.4.4/nm-pppd-plugin.so is for pppd version 2.4.4, this is 2.4.5

A little googling shows that this is a bug in net-misc/networkmanager-0.8-r1, the latest version of NetworkManager in the Entropy repository.

You need to do two things:

1. To get you going for now, install the latest version of the package (net-misc/networkmanager-0.8-r6) via the Portage package manager, as root user in a Konsole/Terminal window:

Code: Select all
emerge --sync
layman -S
emerge -1v networkmanager
equo rescue spmsync

The first command above synchronises your PC with the Portage 'main tree' repository of ebuilds (scripts for compiling and installing source packages).
The second command above synchronises your PC with the Sabayon overlay repository of ebuilds.
The third command above merges (installs) the package.
The fourth command above is to tell Entropy what you did via Portage.

2. File a bug report (see the link 'Bugs' at the top right of this screen) requesting that the current NetworkManager package in the Entropy repository be bumped to the latest version in Portage in order to fix a bug. Refer in your bug report to Gentoo Bugzilla Bug Report No. 330665. This should hopefully trigger joost to build networkmanager-0.8-r6 and put it in the Entropy repository.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7998
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: Huawei E160 Mobile Broadband Modem

Postby maZayka » Sat Sep 25, 2010 23:18

may be
Code: Select all
equo install usb_modeswitch
Женщина не должна быть дурой, всё отстальное поддается коррекции))
maZayka
Young Hen
 
Posts: 36
Joined: Thu Feb 04, 2010 21:24
Location: Москва

Re: Huawei E160 Mobile Broadband Modem

Postby mikefox7 » Sun Sep 26, 2010 4:30

Hello Fitzcarraldo, your effort solved the problem I had! You're great, thanks a lot!
I did as you wrote and filed a bug report - it was the first time for me - and I hope I did it right.
mikefox7
Baby Hen
 
Posts: 9
Joined: Wed Jan 24, 2007 5:29

Re: Huawei E160 Mobile Broadband Modem [Solved]

Postby Fitzcarraldo » Sun Sep 26, 2010 10:04

You're welcome. Glad it's working again.

When your problem is solved, please mark your threads as solved. To do this click on the EDIT button in the first post and append " [Solved]" to the Subject text. Thanks. Why, and how to add "[Solved]" to your post. Please read. I'll do it for you this time.

I'll move this thread to the Networking and Wireless shed (forum), as that is the more appropriate place for it.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7998
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: Huawei E160 Mobile Broadband Modem [Solved]

Postby magesha » Fri Oct 22, 2010 21:14

Hey Fitzcarraldo,

You are one awesome dude! :lol:

I just had a similar problem, and after updating networkmanager as per your instructions and rebooting, everything worked fine. Just wanted to say thanks!

Mine is Reliance Netconnect, with HUAWEI EC168C modem.

Thanks,
Magesha

EDIT: In two minds if I should make a new thread saying what my problem was and how I solved it, and marking it [SOLVED] for reference. Someone pls let me know if that's appropriate. :)
magesha
Young Hen
 
Posts: 21
Joined: Fri Oct 22, 2010 21:09

Next

Return to Networking and Wireless

Who is online

Users browsing this forum: No registered users and 1 guest

cron