WPA2 EAP-TLS

If you are new to Linux or new to Sabayon Linux and just not sure where to post, here ya go. Post without fear of being told to RTFM :-)

Moderator: Moderators

WPA2 EAP-TLS

Postby king1326 » Fri Apr 23, 2010 16:57

Hello,

I've been having issues trying to connect to my school's network with Sabayon 5 Gnome.
Attempts using NetworkManager and the wpa_supplicant have been unsuccesful. With NM, the dialog box Authentication "required" with network settings keeps popping up
with wpa_supplicant the connection times out


Network:
------------------------------------------------------
The network I am trying to connect to is WPA2 with TLS


My wpa_supplicant.conf configured as shown on the school website is as follows

network={
ssid="WPI-Wireless"
key_mgmt=WPA-EAP
proto=WPA2
pairwise=CCMP
group=CCMP TKIP
eap=TLS
identity="******"
ca_cert="/home/awb/linux_cert/netops-ca.pem.cer"
client_cert="/home/awb/linux_cert/Wireless-User.pem"
private_key="/home/awb/linux_cert/Wireless_User.pem"
private_key_passwd="********"
}

Computer:
Asus eee 1000h
Wireless card = RT2860


Other Info
------------------------------

I have installed the RT2860 firmware off sulfur. I can now see wireless networks but not connect to them.

Code: Select all
GLaDOS awb # iwconfig

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bgn  Mode:Managed  Frequency:2.412 GHz 
          Access Point: Not-Associated   Tx-Power=5 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off


Code: Select all
GLaDOS awb # wpa_supplicant -Dwext -iwlan0 -c /etc/wpa_supplicant.conf

ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCSIWSCAN]: Device or resource busy
Failed to initiate AP scan.
Trying to associate with 00:15:e8:df:d0:c0 (SSID='WPI-Wireless' freq=2462 MHz)
Trying to associate with 00:20:d8:25:1e:00 (SSID='WPI-Wireless' freq=2462 MHz)
Authentication with 00:20:d8:25:1e:00 timed out.
Trying to associate with 00:20:d8:25:1e:00 (SSID='WPI-Wireless' freq=2462 MHz)
Authentication with 00:20:d8:25:1e:00 timed out.


I tried installing the driver file from ralink. when I go to make the file it gives me

Code: Select all
GLaDOS 2010_01_29_RT2860_Linux_STA_v2.3.0.0 # make

make -C tools
make[1]: Entering directory `/home/awb/b2010_01_29_RT2860_Linux_STA_v2.3.0.0/2010_01_29_RT2860_Linux_STA_v2.3.0.0/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/awb/b2010_01_29_RT2860_Linux_STA_v2.3.0.0/2010_01_29_RT2860_Linux_STA_v2.3.0.0/tools'
/home/awb/b2010_01_29_RT2860_Linux_STA_v2.3.0.0/2010_01_29_RT2860_Linux_STA_v2.3.0.0/tools/bin2h
cp -f os/linux/Makefile.6 /home/awb/b2010_01_29_RT2860_Linux_STA_v2.3.0.0/2010_01_29_RT2860_Linux_STA_v2.3.0.0/os/linux/Makefile
make -C /lib/modules/2.6.33-sabayon/build SUBDIRS=/home/awb/b2010_01_29_RT2860_Linux_STA_v2.3.0.0/2010_01_29_RT2860_Linux_STA_v2.3.0.0/os/linux modules
make[1]: Entering directory `/usr/src/linux-2.6.33-sabayon'
Makefile:309: /usr/src/linux-2.6.33-sabayon/scripts/Kbuild.include: No such file or directory
Makefile:535: /usr/src/linux-2.6.33-sabayon/arch/x86/Makefile: No such file or directory
make[1]: *** No rule to make target `/usr/src/linux-2.6.33-sabayon/arch/x86/Makefile'.  Stop.
make[1]: Leaving directory `/usr/src/linux-2.6.33-sabayon'
make: *** [LINUX] Error 2




I am a fairly new linux user who has been attempting to use Sabayon for several months on and off with out much luck. Any help or advise would be appreciated.


Thanks!
king1326
Baby Hen
 
Posts: 8
Joined: Fri Nov 27, 2009 7:52

Return to Beginners|Newbies Area

Who is online

Users browsing this forum: No registered users and 2 guests