Installing Sabayon

If you are new to Linux or new to Sabayon Linux and just not sure where to post, here ya go. Post without fear of being told to RTFM :-)

Moderator: Moderators

Re: Installing Sabayon

Postby Luposz » Tue Apr 27, 2010 1:46

Thanks a lot for your answer =3
I'll do that and... I'll post if that fix the error
Thanks a lot ^^
Luposz
Young Hen
 
Posts: 34
Joined: Sun Apr 25, 2010 5:26

Re: Installing Sabayon

Postby donnie » Tue Apr 27, 2010 1:52

4 or 8 speed must help. Also, USB and Unetbootin.
donnie
 

Re: Installing Sabayon

Postby Luposz » Tue Apr 27, 2010 2:13

=(
I just burn a DVD with 4x
Doesn't work =/
The same error still =/
u_u

I really don't know what is it =/
I download 3 different isos...
=/
Grrr... I think Linux it's not for me u_u
Luposz
Young Hen
 
Posts: 34
Joined: Sun Apr 25, 2010 5:26

Re: Installing Sabayon

Postby joeoden » Wed Apr 28, 2010 11:57

I downloaded Sabayon_Linux_DAILY_amd64_K.iso and made sure the md5sum was correct before burning it to a rewritable dvd disc using K3b
The burn process was successful according to K3b, I didn't check the md5sum and placed the dvd disc in my backup desktop and yes I ended up with the following error
isolinux: Disk Error 10, AX = 4200, drive FE

So I placed the dvd in my HP CQ61 Notebook and it did not work

So I grabbed a blank (LG) dvd disc and burnt another copy, allowing it to burn at the fastest speed, when it was finished, I placed the disc in my backup desktop and rebooted, the live dvd booted with no problems so I installed Sabayon_Linux_DAILY_amd64_K on to the the hard disk and it works OK

Now while Sabayon was being installed, I place the rewritable disc in my main desktop computer and attempted to create an image of that disc so that I could check the md5sum, the copy was unsuccessfully
Here is the K3b debugging output
    Devices
    -----------------------
    DVDRW SATA 20X20X12X 9A31 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [TAO, Restricted Overwrite, Layer Jump] [%7]

    K3b::DataTrackReader
    -----------------------
    reading sectors 0 to 1084714 with sector size 2048. Length: 1084715 sectors, 2221496320 bytes.
    using buffer size of 64 blocks.
    Problem while reading. Retrying from sector 2752.
    Problem while reading. Retrying from sector 2816.
    Problem while reading. Retrying from sector 2880.
    Problem while reading. Retrying from sector 2944.
    Read a total of 2944 sectors (6029312 bytes)

    System
    -----------------------
    K3b Version: 1.70.0
    KDE Version: 4.4.2 (KDE 4.4.2)
    QT Version: 4.6.2
    Kernel: 2.6.33-sabayon
As you can see there was quite a few errors reading the disc so I couldn't create an image to check the md5sum

So to put it plain English the problem is the DVD Disc is faulty

The best way to make sure you have a successful burn is to pay a few dollars more and purchase decent disc(s) I mainly use LG or HP and when my supplier is out of stock I get Kodak, to many faulty disc(s) when using the cheap ones
joeoden
Old Dear Hen
 
Posts: 477
Joined: Sun Mar 15, 2009 10:35
Location: Back in the 'swamp land' Moe, Australia 38°10′20″S 146°16′04″E

Previous

Return to Beginners|Newbies Area

Who is online

Users browsing this forum: No registered users and 1 guest