Impression HP F4280

Conversations générales au sujet de Sabayon Linux

Moderator: Moderators

Post Reply
Pacifick_FR42
Simple Hen
Posts: 52
Joined: Tue May 04, 2010 16:50

Impression HP F4280

Post by Pacifick_FR42 » Mon Jul 12, 2010 17:28

Bonjours à tous !
Voilà mon petit souci : J'ai installé mon imprimante HP F4280, mais dés que je lance une impression, rien ne s'imprime, dans cups, le statut est : "stopped" que ce soit root ou moi.
Pour l'installation, je suis passé par cups, mais j'ai le même résultat avec l'utilitaire d'impression
Habituellement, cette imprimante est détecté et installé sans rien faire (ubuntu).

Une idée ? :)

turquoise
Old Dear Hen
Posts: 719
Joined: Wed Nov 15, 2006 1:14
Location: Abitibi-Témiscamingue!

Re: Impression HP F4280

Post by turquoise » Thu Jul 15, 2010 0:18

Version de hplip instalée peut-être? La version minimum pour ton modèle est la 3.9.10. Un equo search hplip devrait te renseigner.
Ma philosophie d'apprentissage : essayer, et si ça casse, essayer de réparer.
My learning philosophy: try it, and if it breaks, try to fix it.
Image

Pacifick_FR42
Simple Hen
Posts: 52
Joined: Tue May 04, 2010 16:50

Re: Impression HP F4280

Post by Pacifick_FR42 » Thu Jul 15, 2010 0:49

Version hplip 3.10.5
En mode console quant je lance gnome-cups-manager, j'ai ce message :
gnome-cups-manager
en root :

Code: Select all

An error occurred while loading or saving configuration information for gnome-cups-manager. Some of your configuration settings may not work properly.
DETAIL>>> :Le contact du serveur de configuration a échoué ; causes possibles : vous n'avez pas activé le réseau TCP/IP pour ORBit ou des verrous NFS non valides existent suite à un blocage du système. Voir http://projects.gnome.org/gconf/ pour plus d'informations. (Détails -  1: La connexion à la session a échoué : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
Le contact du serveur de configuration a échoué ; causes possibles : vous n'avez pas activé le réseau TCP/IP pour ORBit ou des verrous NFS non valides existent suite à un blocage du système. Voir http://projects.gnome.org/gconf/ pour plus d'informations. (Détails -  1: La connexion à la session a échoué : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
Le contact du serveur de configuration a échoué ; causes possibles : vous n'avez pas activé le réseau TCP/IP pour ORBit ou des verrous NFS non valides existent suite à un blocage du système. Voir http://projects.gnome.org/gconf/ pour plus d'informations. (Détails -  1: La connexion à la session a échoué : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
Le contact du serveur de configuration a échoué ; causes possibles : vous n'avez pas activé le réseau TCP/IP pour ORBit ou des verrous NFS non valides existent suite à un blocage du système. Voir http://projects.gnome.org/gconf/ pour plus d'informations. (Détails -  1: La connexion à la session a échoué : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
Le contact du serveur de configuration a échoué ; causes possibles : vous n'avez pas activé le réseau TCP/IP pour ORBit ou des verrous NFS non valides existent suite à un blocage du système. Voir http://projects.gnome.org/gconf/ pour plus d'informations. (Détails -  1: La connexion à la session a échoué : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
Le contact du serveur de configuration a échoué ; causes possibles : vous n'avez pas activé le réseau TCP/IP pour ORBit ou des verrous NFS non valides existent suite à un blocage du système. Voir http://projects.gnome.org/gconf/ pour plus d'informations. (Détails -  1: La connexion à la session a échoué : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
Le contact du serveur de configuration a échoué ; causes possibles : vous n'avez pas activé le réseau TCP/IP pour ORBit ou des verrous NFS non valides existent suite à un blocage du système. Voir http://projects.gnome.org/gconf/ pour plus d'informations. (Détails -  1: La connexion à la session a échoué : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)

turquoise
Old Dear Hen
Posts: 719
Joined: Wed Nov 15, 2006 1:14
Location: Abitibi-Témiscamingue!

Re: Impression HP F4280

Post by turquoise » Fri Jul 16, 2010 18:48

Ok, tu as essayé de lancer hp-setup?

J'aimerais aussi voir le résultat de hp-check et/ou hp-check -t .
Ma philosophie d'apprentissage : essayer, et si ça casse, essayer de réparer.
My learning philosophy: try it, and if it breaks, try to fix it.
Image

Pacifick_FR42
Simple Hen
Posts: 52
Joined: Tue May 04, 2010 16:50

Re: Impression HP F4280

Post by Pacifick_FR42 » Fri Jul 16, 2010 19:22

Avec hp-setup (root) :
error: No PPD found for model deskjet_f4200 using old algorithm.
error: No appropriate print PPD file found for model deskjet_f4200_series
Si je fait <Back> & <NEXT> là, il me touve le driver, l'install, mais, idem, n'imprime rien...

hp-check :

Code: Select all

hp-check 

HP Linux Imaging and Printing System (ver. 3.10.5)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.                                                                 
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.                                                          
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).                                                                                                                     

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux sabayon 2.6.34-sabayon #1 SMP Mon May 31 16:33:35 UTC 2010 i686 Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz GenuineIntel GNU/Linux

Distribution:
gentoo 2.0.1

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7 installed.

Checking for CUPS...
Status: le programmateur s’exécute
Version: 1.4.4
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.5 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.10.5

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.10.5
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=no
cups-drv-install=no
cups-ppd-install=no
internal-tag=3.10.4.16
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
error: Could not access file: Aucun fichier ou dossier de ce type

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                              Model                                                 
  ------------------------------------------------------  ------------------------------------------------------
  hp:/usb/Deskjet_F4200_series?serial=CN89R3C3JW05BR      HP Deskjet F4200 series                               

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
Deskjet_F4200 
---------------
Type: Printer
Device URI: hp:/usb/Deskjet_F4200_series?serial=CN89R3C3JW05BR
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/Deskjet_F4200_series?serial=CN89R3C3JW05BR' is a Hewlett-Packard Deskjet_F4200_series all-in-one
device `v4l:/dev/video0' is a Noname USB Camera (046d:08d7) virtual device


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x2504 at 002:008: 
    Device URI: hp:/usb/Deskjet_F4200_series?serial=CN89R3C3JW05BR
    Device node: /dev/bus/usb/002/008
    Mode: 0660
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/002/008
# owner: root
# group: lp
user::rw-
group::rw-
other::---



---------------
| USER GROUPS |
---------------

root bin daemon sys adm disk wheel floppy audio dialout tape video lpadmin sabayon-admin pulse-access pulse-rt pulse


-----------
| SUMMARY |
-----------

No errors or warnings.

Done.
Voilà ;) merci de ton aide.

Post Reply