Nvidia Legacy Drivers & 3.8 Kernel Compatibility [Solved]

Anything that pertains to Entropy, Equo or Sulfur

Moderator: Moderators

Post Reply
tonyawards
Growing Hen
Posts: 112
Joined: Sun Nov 23, 2008 4:21

Nvidia Legacy Drivers & 3.8 Kernel Compatibility [Solved]

Post by tonyawards » Tue Mar 19, 2013 3:39

A bit of this was posted on the tail end of an already {Solved] thread, but I'm not sure about these latest nVidia driver set recommendations and their compatibility, so I'm reposting here with additional questions; hoping someone knows what's what with the drivers and older legacy cards...

**************
I have an older (GeForce 6150) nVidia card, and have been stuck with the 304.64 driver & userspace, masked as the last one to support my older card - which has been fine with me so far.

But I have seen that the 3.8 kernel is now in entropy (I'm on 3.7.4), but I don't see a 304.64 driver for 3.8... Is that right?

If so, any idea as to if/when nVidia plans to provide one, or is there another way to get into 3.8 without also getting a black screen for the nth time...?

And now, today - I see that with my *equo upgrade --ask* it wants to pull in these:

Code: Select all

   # (85/177) [sabayonlinux.org] x11-drivers/nvidia-drivers-173.14.36#3.7.0-sabayon
>>     Versions: 304.64 / 3.7.0-sabayon / 3 ===> 173.14.36 / 3.7.0-sabayon / 1
>>      Action:          Downgrade
>>    # (86/177) [sabayonlinux.org] x11-drivers/nvidia-userspace-173.14.36
>>     Versions: 304.64 / NoTag / 1 ===> 173.14.36 / NoTag / 7
Now I'm not sure what will work for my older driver set if the 304.64 is not available for 3.8: the newer 313.18, this 173.14.36, or...?

The latest (#2) repository notice did not appear to apply to my 6150 card (I didn't think), but now I'm not totally sure about that either...

Anyone know what works - should I let the 173.14.36 downgrade be pulled in, and would that work with the 3.8 kernel too? Or unmask and go with 313.18? Or is there an even better idea for the older nVidia cards and the newer kernels?

Thanks, all.
Last edited by tonyawards on Fri Mar 22, 2013 3:58, edited 1 time in total.
SL Version: XI+, just rollin' along / Kernel 3.8.3 | KDE 4.10.1 | HP dv6000z | AMD Turion64 MK-36 | 2GB RAM | nVidia GeForce 6150

colock
Simple Hen
Posts: 56
Joined: Mon Feb 25, 2013 12:01

Re: Nvidia Legacy Card Drivers & 3.8 Kernel Compatibility

Post by colock » Tue Mar 19, 2013 13:07

By feeling, if I were you, I would stick to 304.xx driver, with the latest possible kernel this driver has been built against.

I.e., keep 304.64 with kernel 3.7.

For newer kernels you should do some research, I have no idea.

Matte88
Technological Hen
Posts: 399
Joined: Wed Dec 29, 2010 14:37
Location: @/etc/entropy/repositories.conf.d/entropy_sabayon-limbo

Re: Nvidia Legacy Card Drivers & 3.8 Kernel Compatibility

Post by Matte88 » Tue Mar 19, 2013 16:54

>> [2] [Sun, 17 Mar 2013 07:53:22 +0000] Titolo: Beware AMD Radeon legacy and NVIDIA GeForce legacy users
>> Contenuto:

As it always happens, proprietary video drivers fall short.
This time it's because we are, after one year, upgrading
X.Org to version 1.13. This means that some legacy drivers
have been removed:
- AMD Catalyst 12.6_beta_pre897
- NVIDIA legacy 96.xx
They don't work with the new X.Org, so either you are on your
own or have to switch to open source drivers.
Sorry, it's not our fault.

>> Link: http://www.sabayon.org/
Image
When I became the sun,
I shone life into the man's hearts.

tonyawards
Growing Hen
Posts: 112
Joined: Sun Nov 23, 2008 4:21

Re: Nvidia Legacy Card Drivers & 3.8 Kernel Compatibility

Post by tonyawards » Wed Mar 20, 2013 5:45

Hi Matte88 – thanks for the input, and thanks to you too, colock.

Yes, I had seen that notice yesterday, and was hoping that it did not apply to me. I have been using 304.64, and I just saw that 304.84 has made it into the repository, today apparently. So I just unmasked my old drivers and masked the 313.18 to try, and it's working. Which most likely solves my upgrade issue, as the 304.84 is also available for the 3.8 kernel.

According to nVidia, here:
http://www.nvidia.com/object/unix.html
and
https://nvidia.custhelp.com/app/answers ... /a_id/3142

they do plan to keep up, at least for a while. They're just a bit slow getting these out to the legacy users, I guess.

I'll be doing a kernel switcher to 3.8 shortly, using the 304.84 driver and userspace set, will report back, and hopefully mark this as solved. For now, it's looking as though my old GeForce 6150 may still have a bit of life yet...
SL Version: XI+, just rollin' along / Kernel 3.8.3 | KDE 4.10.1 | HP dv6000z | AMD Turion64 MK-36 | 2GB RAM | nVidia GeForce 6150

Ryuno-Ki
Old Dear Hen
Posts: 494
Joined: Mon Feb 27, 2012 22:15
Location: Southern Germany
Contact:

Re: Nvidia Legacy Card Drivers & 3.8 Kernel Compatibility

Post by Ryuno-Ki » Wed Mar 20, 2013 21:15

tonyawards wrote:I'll be doing a kernel switcher to 3.8 shortly, using the 304.84 driver and userspace set, will report back, and hopefully mark this as solved. For now, it's looking as though my old GeForce 6150 may still have a bit of life yet...
Oh, yeah, I'm using this card as well :)
Kind for you to be a tester :)
German Wiki translator ◆ Want to contribute on the wiki? Ask the Bureaucrats!
Please, mark solved threads ◆ Posts unread and unansweredPackage requests

tonyawards
Growing Hen
Posts: 112
Joined: Sun Nov 23, 2008 4:21

Re: Nvidia Legacy Card Drivers & 3.8 Kernel Compatibility

Post by tonyawards » Fri Mar 22, 2013 3:55

Well, it all works now.

What I had to do was first unmask the 313.18 nVidia driver/userspace set, in order for the kernel-switcher to work. Then, after doing the basic “switch” to the 3.8.3 kernel and pulling in the deps, I had to re-mask the newer drivers, and downgrade back to the 304.84 set.

Did a deptest, which complained about the 3.7.0 nVidia 313.18 set not being there since I had not yet rebooted, but otherwise was fine.

After the driver downgrade, it rebooted right back to the desktop, no black screen.

However, now, after the updates that I did and the kernel-switch, when I shut down I get a black screen, no shutdown graphics or progress scroll, nothing. Pressing f2 makes no difference. Strange. But that may be an issue for a separate thread; I'll look around a bit first.

Otherwise, all is fine, as best as I can tell. So I believe I can mark this solved.
SL Version: XI+, just rollin' along / Kernel 3.8.3 | KDE 4.10.1 | HP dv6000z | AMD Turion64 MK-36 | 2GB RAM | nVidia GeForce 6150

Post Reply