UPDATING SABAYON

Discussion in general that pertains to Sabayon Linux - Must Pertain to Sabayon Linux

Moderator: Moderators

UPDATING SABAYON

Postby JTAL604622 » Mon Nov 20, 2006 3:23

I want to update to the new KDE release. Is there a quick list of instructions of what a gentoo newbie needs to do to update the system to the latest bleeding edge? I looked through the Gentoo instructions but I came from using windows so I get confused easily..lol.

How about a quick rundown of how to update my laptop from the newest Sabayon to todays bleeding edge, and how many days for a 2gig laptop to do this...

Thanks
JTAL604622
Simple Hen
 
Posts: 42
Joined: Sat Nov 18, 2006 17:10

Postby mdmarmer » Mon Nov 20, 2006 3:39

If you want to update to newest KDE, easy -- will take only 4 to 8 hours

emerge kde-meta
if it stops
emerge --resume --skipfirst

Discard all the configuration updates

===

Probably should not update anything else unless you want to take a chance of breaking your system -- version 3.2 will be out in about 10 days -- just reinstall or update to version 3.2

Mike
mdmarmer
Advanced Hen
 
Posts: 240
Joined: Thu Oct 19, 2006 1:46
Location: dayton OH usa

Postby JTAL604622 » Mon Nov 20, 2006 3:42

3.2 already...?

I just got 3.1 from mad tux...lol..

I will have to watch for it and grab the iso from them again. I guess buying from madtux it says the monies I pay go to sabayon..? i hope so....maybe ill donate at 3.2 directly if it can solve my wireless card problem. Works great in Ubuntu, but not here..not sure why.

Thanks, again
JTAL604622
Simple Hen
 
Posts: 42
Joined: Sat Nov 18, 2006 17:10

Postby mdmarmer » Mon Nov 20, 2006 4:04

Post details of your wireless card -- version and chipset --

lspci -vv
lsusb

may help you identify

Mike
mdmarmer
Advanced Hen
 
Posts: 240
Joined: Thu Oct 19, 2006 1:46
Location: dayton OH usa

Postby JTAL604622 » Tue Nov 21, 2006 0:02

Here is my Network info from lspsci -vv ....I see where it ids my network card, compusa wireless card and my broadcom wireless (built in) not sure what all the verbage means though...

Thanks, for any help, I would love to take this around show people at work.

Jonathon

localhost jtal604622 # lspci -vv
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=32M]
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [d0] HyperTransport: Slave or Primary Interface
!!! Possibly incomplete decoding
Command: BaseUnitID=0 UnitCnt=9 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC+ TXO- <CRCErr=0
Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config 1: MLWI=N/C MLWO=N/C LWI=N/C LWO=N/C
Revision ID: 1.02
Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e2100000-e21fffff
Prefetchable memory behind bridge: e8000000-efffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 8100 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin ? routed to IRQ 185
Region 4: I/O ports at 2000 [size=16]

00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 173 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 177
Region 0: I/O ports at 1000 [size=256]
Region 1: I/O ports at 1c00 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 173 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 177
Region 0: I/O ports at 1400 [size=256]
Region 1: I/O ports at 1c80 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 201
Region 0: Memory at e2002000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 209
Region 0: Memory at e2003000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 193
Region 0: Memory at e2004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 173 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 169
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at e2005000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 34000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 34020000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 32000000-33fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001

00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: AMBIT Microsystem Corp. TravelMate 2410
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 217
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=8K]

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 7
BIST result: 00
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e2100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 169
Region 0: I/O ports at 2400 [size=256]
Region 1: Memory at 32000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
JTAL604622
Simple Hen
 
Posts: 42
Joined: Sat Nov 18, 2006 17:10

Postby wolfden » Tue Nov 21, 2006 0:17

Just for future reference PLEASE do not make topics typed in all CAPITAL LETTERS - it's not proper etiquette.

btw 3.2 is due out around the 27th of Nov.
wolfden
Sharecropper
 
Posts: 9051
Joined: Sat Jan 14, 2006 0:55
Location: Midwest USA

Postby JTAL604622 » Tue Nov 21, 2006 0:20

ok almost there my light on my card turns on and it is listed at the top under knetworkmanager.

It is listed there with a bar showing that it can see my network and the signal strength, however when i click on it it says activating wireless netwrok connection, gets to 28% and fails. When i go and look at the details on the card it says no IP address. It looks like it sees it, defines it properly, but cannot determine the DCHP (sp). Any thoughts???
JTAL604622
Simple Hen
 
Posts: 42
Joined: Sat Nov 18, 2006 17:10

Postby JTAL604622 » Tue Nov 21, 2006 0:22

Sorry about that. Did it by accident as I was working in "excel".
JTAL604622
Simple Hen
 
Posts: 42
Joined: Sat Nov 18, 2006 17:10

Postby nattfodd » Tue Nov 21, 2006 1:45

Unless Sabayon uses a funky portage setup, the first step for updating your tree is to run :

Code: Select all
emerge --sync



This will sync your ebuild tree with the latest version, and then you can run something like

Code: Select all
emerge -auvDNt world


to update all your system at once (I'll let you check in man portage the meaning of all those options).
nattfodd
Baby Hen
 
Posts: 1
Joined: Tue Nov 21, 2006 1:37

Broadcom wireless - use ndiswrapper - remove bcm43xx module

Postby mdmarmer » Tue Nov 21, 2006 2:01

This thread should get you going

http://www.sabayonlinux.org/forum/viewt ... t=broadcom

Basically the bcm43xx driver (in the kernel) interferes with the use of ndiswrapper, so you need to set up to do
rmmod bcm43xx
on every boot (I don't think Sabayon uses a blacklist) -- driver will be on wlan0

alternative is to use the native bcm43xx driver, then you need to
emerge bcm43xx-fwcutter
run that program against the .sys firmware from your Windows install or CD
Then the driver will be on eth0 or eth1

Mike
mdmarmer
Advanced Hen
 
Posts: 240
Joined: Thu Oct 19, 2006 1:46
Location: dayton OH usa

Next

Return to Sabayon Linux General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron