Nvidia problem [Solved]

Discussion in general that pertains to Sabayon Linux - Must Pertain to Sabayon Linux

Moderator: Moderators

Re: Nvidia problem [Solved]

Postby jaguar1637 » Thu Jan 11, 2018 1:09

The installation is put on a USB key

In fact, after booting on the USB key, the system does not recognize the hardware / Graphical card from the Acer Helios 300 w/ Nvidia GTX 1060
I am lost at this step and do not know which item to choose
** DEFAULT or
*** Isntall Sabayon Mate (rel 18.1)

Whatever my choice, the installation failed
any idea ?
jaguar1637
Simple Hen
 
Posts: 62
Joined: Sun Jul 26, 2009 9:11
Location: Toulouse - France

Re: Nvidia problem [Solved]

Postby jaguar1637 » Tue Jan 16, 2018 8:05

so, I need to install the distribution Sabayon_Linux_16.11_amd64_MATE
on an Acer Helios 300 w/ a GC Nvidia gtx 1060
but I suck while booting on a USB created by Unebuiltin

If I select one of the item : "Installation of Sabayon Mate" or "Default"
the installation fails , with a xorg error like

Conditions : - when I launch the following command "Default"
/ubnkern initrd=/ubninit overlayfs cdroot splash quiet --

the message I got
INFO: rcu_sched detected stalls on CPUs/tasks
o0-...: (2 GPs behind) idle=65e/0/0 softirq=26/26 fqs=0
o1-...: (5 GPs behind) idle=b62/0/0 softirq=15/17 fqs=0
o2-...: (1 GPs behind) idle=a5a/0/0 softirq=20/20 fqs=0
o5-...: (5 GPs behind) idle=794/0/0 softirq=16/18 fqs=0
o'detected by 3, t=60002 giffies, g=-287, c=288, q=30)
rcu_sched kthread starved for 60002 jiffies! g18446744073709551329 c18446744073709551328 f0x0 RCU_GP_WAIT_FQS(3) -> state=0x1
____________________________________

5 years ago, I got the same problem on an old Acer w/ Nvidia GC
so, I did a Sabayon Gnome installation first
and after, I made a new installation without modifying the file-system's sizes
w/ a previous Sabayon Mate (10 if I remember..)

So, today, in 2018, the same issue occurs each time, I want to install sabayon on a ACER w/ Nvidia Gc

Any idea ?
jaguar1637
Simple Hen
 
Posts: 62
Joined: Sun Jul 26, 2009 9:11
Location: Toulouse - France

Re: Nvidia problem [Solved]

Postby sabayonino » Tue Jan 16, 2018 11:49

Hi

Unetbootinh has some incompatibility running Sabayon ISOs

Please can you try RosaImageWriter

It works fine.

tnx
[Che Cos'è Il Calcolo Distribuito (BOINC)

BOINC ready ! Sabayon+BOINC = BILD ,my Sabayon spin :cyclops: - Ready to crunch for the Science everywhere :)
User avatar
sabayonino
Sagely Hen
 
Posts: 3141
Joined: Sun Sep 21, 2008 1:12
Location: Italy

Re: Nvidia problem [Solved]

Postby gentmixer » Sun Jan 21, 2018 22:50

Hi...
In the newest nvidia-drivers the "userspace" is integrated inside... Remove eventually all "userspaces" and emerge nvidia-drivers-390.12 from Gentoo repositories (easier) or immediately from Nvidia (more complicated procedure because mismatch of kernel version).
gentmixer
Simple Hen
 
Posts: 42
Joined: Wed Jan 17, 2018 17:21

Re: Nvidia problem [Solved]

Postby sabayonino » Mon Jan 22, 2018 17:29

"nvidia-userspace" in Sabayon is splitted to its own package.
[Che Cos'è Il Calcolo Distribuito (BOINC)

BOINC ready ! Sabayon+BOINC = BILD ,my Sabayon spin :cyclops: - Ready to crunch for the Science everywhere :)
User avatar
sabayonino
Sagely Hen
 
Posts: 3141
Joined: Sun Sep 21, 2008 1:12
Location: Italy

Re: Nvidia problem [Solved]

Postby gentmixer » Fri Jan 26, 2018 17:03

Splitted, but not working (probably masked now nvidia-drivers-387.*). One can revert from the not splitted to the splitted userspace freely in the future... No an additional troubles, installing from Sabayon repos only.
gentmixer
Simple Hen
 
Posts: 42
Joined: Wed Jan 17, 2018 17:21

Re: Nvidia problem [Solved]

Postby sabayonino » Fri Jan 26, 2018 18:16

mask
x11-drivers/nvidia-drivers-387.34

Install
x11-drivers/nvidia-drivers-384.98
x11-drivers/nvidia-userspace-384.98

PS : which kernel you're running ?

Threre are in sabayonlinux.org repo
Code: Select all
sys-kernel/linux-sabayon-4.1.48
sys-kernel/linux-sabayon-4.14.14
sys-kernel/linux-sabayon-4.4.112
sys-kernel/linux-sabayon-4.9.77


consider to switch the kernel (one of these) and install the nvidia-drivers-384.xx

Code: Select all
x11-drivers/nvidia-drivers-384.98#4.1.0-sabayon
x11-drivers/nvidia-drivers-384.98#4.14.0-sabayon
x11-drivers/nvidia-drivers-384.98#4.4.0-sabayon
x11-drivers/nvidia-drivers-384.98#4.9.0-sabayon

Code: Select all
x11-drivers/nvidia-userspace-384.98
[Che Cos'è Il Calcolo Distribuito (BOINC)

BOINC ready ! Sabayon+BOINC = BILD ,my Sabayon spin :cyclops: - Ready to crunch for the Science everywhere :)
User avatar
sabayonino
Sagely Hen
 
Posts: 3141
Joined: Sun Sep 21, 2008 1:12
Location: Italy

Re: Nvidia problem [Solved]

Postby jaguar1637 » Tue Jan 30, 2018 19:15

ok ok so, I just downloaded the MATE 18.2 and stored it w/ the RIM software.

and still , same problem, I am unable to install this release.
First, it shows it got a difficulty to understand which type of screen I got, it"s a full HD1080
After, the installation failed
when I tried to launch the startx command, the desktop is just a simple window

My question is :
which parameter should I put in the grub command at the begin of the installation ?

please, help, otherwise, I think only geeks are able to install a Gentoo release, if they got a pc w/ Nvidia GC
jaguar1637
Simple Hen
 
Posts: 62
Joined: Sun Jul 26, 2009 9:11
Location: Toulouse - France

Re: Nvidia problem [Solved]

Postby jaguar1637 » Fri Feb 02, 2018 23:09

ok when I boot from the USB key, I got this

Start sabayon 18.2 Mate

initrd=/boot/sabayon.igz overlayfs cdroot splash quiet -- sabayon opengl=nvidia

nothing more, except this

sabayon:

so, I log as root
# startx

X.Org X Server 1.19.5
kernel command line:

initrd=/boot/sabayon.igz overlayfs cdroot splash quiet -- sabayon opengl=nvidia
dovirtio vconsole.keymap=fr vconsole.keymap.variant=oss
Build Date: 06 November 2017

Current version of pixman: 0.34.0

ERROR; Error querying enabled displays on GPU 0(Missing Extension)

_________________________________________________________
pls help
jaguar1637
Simple Hen
 
Posts: 62
Joined: Sun Jul 26, 2009 9:11
Location: Toulouse - France

Re: Nvidia problem [Solved]

Postby jaguar1637 » Sat Feb 03, 2018 15:26

ok I tried this option instead

xdriver=nvidia
and also xdriver=vesa
xdriver=fb
without any success

so, I am wandering which option I should put during the installation of Sabayon Mate when ther is a Nvidia GC 1060
jaguar1637
Simple Hen
 
Posts: 62
Joined: Sun Jul 26, 2009 9:11
Location: Toulouse - France

PreviousNext

Return to Sabayon Linux General Discussion

Who is online

Users browsing this forum: No registered users and 4 guests

cron