Yet another resolution Question,

Compiz, KDE, Gnome, Fluxbox, etc...

Moderator: Moderators

Yet another resolution Question,

Postby poisomike87 » Fri Feb 01, 2008 4:39

Hello, I joined in august and have been using sabayon on and off since august.

here is my problem,

I have a laptop A compaq presario V5204NRhttp://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&dlc=en&product=3197922&lang=en&docname=c00700119

I did a clean install today, and got everything working. I saved the big problem for last, and that would be my resolution problems.

I know there are several other threads devoted around here about issues regarding the Intel 945G chipset and I have waded through most of them and tried them all, I got everything to work fine then I emerged corky customized that and restarted X.

Everything went back tot he way it was and will not go back.


Here is my xorg.conf


Code: Select all
Section "Files"


    #FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath    "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath    "/usr/share/fonts/corefonts"

EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************

Section "Module"

    Load   "dbe"
    Load   "i2c"
    Load   "glx"
    Load   "ddc"
    Load   "type1"
    Load   "freetype"
    Load   "extmod"
    Load   "synaptics"
    Load   "vbe"
   Load        "dri"

EndSection


# **********************************************************************
# Server flags section.  This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"

     Option    "AllowMouseOpenFail" "true"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"
    Identifier      "Synaptics1"
    Driver      "synaptics"
    Option      "SendCoreEvents"   "true"
    Option      "Device"      "/dev/psaux"
    Option      "Protocol"      "auto-dev"
    Option      "HorizScrollDelta"   "0"
    Option      "SHMConfig"      "on"
    # For ALPS/MacBook TouchPads
    #Option      "MaxSpeed"      "0.7"
    #Option      "MinSpeed"      "0.18"
    #Option      "AccelFactor"      "0.08"
    #Option      "TopEdge"      "120"
    #Option      "LeftEdge"      "120"
    #Option      "BottomEdge"      "830"
    #Option      "RightEdge"      "650"
    #Option      "FingerLow"      "25"
    #Option      "FingerHigh"      "30"
    # MacBook touchpad
    #Option      "MaxTapTime"      "180"
    #Option      "MaxTapMove"      "220"
    #Option      "MaxDoubleTapTime"   "180"
    #Option      "VertScrollDelta"   "20"
    #Option      "HorizScrollDelta"   "50"
    #Option      "TapButton2"      "3"
    #Option      "TapButton3"      "2"
    #Option      "VertTwoFingerScroll"   "1"

    # Do you keep moving the mouse while typing? Try this trick.
    #synclient TouchpadOff=1 disable your synaptics touchpad
    #synclient TouchpadOff=0 enable your synaptics touchpad
EndSection


Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"
   
    Option   "AutoRepeat"   "500 5"
    Option      "XkbModel"   "pc105"
    Option   "XkbLayout"   "us"
    Option      "XkbRules"      "xorg"
    # Macintosh keyboard
    #Option   "XkbOptions"   "lv3:rwin_switch"

EndSection


Section "InputDevice"
  Driver        "wacom"
  Identifier    "wacom1"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "wacom2"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "wacom3"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver   "mouse"

    Option   "Device"   "/dev/psaux"
    Option   "Protocol"   "ImPS/2"
    Option   "ZAxisMapping"   "4 5"
     
EndSection

Section "InputDevice"
    Identifier   "Mouse2"
    Driver   "mouse"
    Option   "Protocol"   "ImPS/2"
    Option   "Device"   "/dev/input/mice"
    Option    "ZAxisMapping" "4 5"
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier   "Generic Monitor"
    #Option      "DPMS"

    VertRefresh 43 - 60
    HorizSync   28 - 80
   
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA"
    Driver      "i810" # do not remove vesa
    #Option "RenderAccel" "on"
    #Option "XAANoOffscreenPixmaps"
    #Option "BusType" "PCI"
    #Option "ColorTiling" "on"
    #Option "EnablePageFlip" "on"
EndSection


# **********************************************************************
# Screen sections.
# **********************************************************************

Section "Screen"

# The Identifier, Device and Monitor lines must be present

    Identifier   "Screen 1"
    Device   "VESA"
    Monitor   "Generic Monitor"
    #Option "AddARGBGLXVisuals" "true"

# The favoured Depth and/or Bpp may be specified here

   DefaultDepth 24

SubSection "Display"
Depth 8
ViewPort 0 0
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubsection

SubSection "Display"
Depth 16
ViewPort 0 0
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubsection

SubSection "Display"
Depth 24
ViewPort 0 0
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubsection

EndSection


Section "ServerLayout"
# The Identifier line must be present

    Identifier   "Main Layout"
    Screen 0    "Screen 1"
    InputDevice   "Mouse1" "CorePointer"
    InputDevice   "Mouse2" "SendCoreEvents"
    InputDevice "Synaptics1" "SendCoreEvents"
    #InputDevice "wacom1" "SendCoreEvents"
    #InputDevice "wacom2" "SendCoreEvents"
    #InputDevice "wacom3" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
    Mode 0666
EndSection

Section "Extensions"
   #Option "Composite" "Enable"
EndSection



and my 915 Resolution file

Code: Select all
# Copyright 1999-2006 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-apps/915resolution/files/confd,v 1.3 2007/04/17 16:52:24 genstef Exp $

# Config file for /etc/init.d/915resolution
# based on the config file included with sys-apps/855resolution

# this example will replace mode "4d" with 1280x768x24
replace="'4d 1280 768 24'"

# to replace more than one mode do something like this
#replace="'4d 1280 768 24' '5c 1400 1050 16'"

# if you want to log the output add the file here.
# this will be overwritten at every boot
log="/var/log/915resolution"
replace[0]="38"
with[0]="1280 800"


I have tried everything to no avail, is there something that I a missing?
poisomike87
Baby Hen
 
Posts: 1
Joined: Mon Aug 27, 2007 1:39

Return to 3D Desktops and Window Managers

Who is online

Users browsing this forum: No registered users and 2 guests