eth0 not working, forcedeth? [Solved]

Issues Related to Networking (Wired and Wireless)

Moderator: Moderators

eth0 not working, forcedeth? [Solved]

Postby migi » Tue Jun 22, 2010 17:03

Hi, i had a long time mandriva linux and my net card worked with module forcedeth.
I installed now Sabayon 5,3 amd64 K, desktop and audio is working, but internet not.

I have integrated netcard 10/100 Fast Ethernet by Realtek® 8201CL viz. http://www.msi.com/index.php?func=prodd ... incat_no=1

Help :)
migi
Baby Hen
 
Posts: 4
Joined: Tue Jun 22, 2010 16:54

Re: eth0 not working, forcedeth?

Postby Fitzcarraldo » Tue Jun 22, 2010 18:05

Is it just your Web browser that is not working, or can't you ping anything from a Konsole either? Just in case the problem is not due to a module but to the MTU setting or ipv6 being enabled in Firefox, have a read through the following thread on the off-chance that something in there may help: viewtopic.php?f=86&t=19293

Open a Konsole window, log-in as root user, enter the following commands, and paste the outputs here:

Code: Select all
$ su
Password:
# lsmod
# lspci
# dmesg
# ifconfig
# ping -c 10 www.google.com

Please use the Code button to post the results so that your post is not too long.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7985
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: eth0 not working, forcedeth?

Postby migi » Tue Jun 22, 2010 19:00

web browser not working, ping on konsole write unknown host
Code: Select all
sabayon hans # lsmod
Module                  Size  Used by
ipv6                  234062  24
snd_seq_dummy           1126  0
snd_seq_oss            22271  0
snd_seq_midi_event      4125  1 snd_seq_oss
snd_seq                38803  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          4083  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            29495  0
snd_mixer_oss          10991  1 snd_pcm_oss
snd_hda_codec_realtek   240006  1
nvidia              10820340  40
snd_hda_intel          18245  3
snd_hda_codec          60723  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               4492  1 snd_hda_codec
snd_pcm                55461  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              14068  2 snd_seq,snd_pcm
snd                    42577  17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
pcspkr                  1518  0
tpm_tis                 6757  0
tpm                     9307  1 tpm_tis
tpm_bios                3888  1 tpm
snd_page_alloc          5875  2 snd_hda_intel,snd_pcm
forcedeth              43821  0
i2c_nforce2             5051  0
i2c_core               14004  2 nvidia,i2c_nforce2
xts                     2295  0
gf128mul                7375  1 xts
tg3                   111994  0
e1000                  92059  0
scsi_wait_scan           725  0
sl811_hcd               8996  0
ohci_hcd               19171  0
uhci_hcd               18853  0
ehci_hcd               31984  0
sx8                    12106  0
imm                     8933  0
parport                31583  1 imm
pata_pcmcia            10330  0
pcmcia                 33153  1 pata_pcmcia

sabayon hans # lspci
00:00.0 Host bridge: nVidia Corporation Device 07c3 (rev a2)
00:00.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a2)
00:01.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.2 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.3 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.4 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.5 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:01.6 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:02.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1)
00:03.0 ISA bridge: nVidia Corporation MCP73 LPC Bridge (rev a2)
00:03.1 SMBus: nVidia Corporation MCP73 SMBus (rev a1)
00:03.2 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1)
00:03.3 Co-processor: nVidia Corporation MCP73 Co-processor (rev a2)
00:03.4 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation GeForce 7100/nForce 630i USB (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1)
00:08.0 IDE interface: nVidia Corporation MCP73 IDE (rev a1)
00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
00:0a.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0b.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0c.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP73 IDE (rev a2)
00:0f.0 Ethernet controller: nVidia Corporation MCP73 Ethernet (rev a2)
00:10.0 VGA compatible controller: nVidia Corporation C73 [GeForce 7050 / nForce 610i] (rev a2)

sabayon hans # dmesg
 pci 0000:00:03.3: reg 10: [mem 0xfeb80000-0xfebfffff]                                                                                                                             
[    0.160288] pci 0000:00:04.0: reg 10: [mem 0xfeb7f000-0xfeb7ffff]                                                                                                               
[    0.160320] pci 0000:00:04.0: supports D1 D2                                                                                                                                     
[    0.160322] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold                                                                                                         
[    0.160325] pci 0000:00:04.0: PME# disabled                                                                                                                                     
[    0.160351] pci 0000:00:04.1: reg 10: [mem 0xfeb7ec00-0xfeb7ecff]                                                                                                               
[    0.160388] pci 0000:00:04.1: supports D1 D2                                                                                                                                     
[    0.160390] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold                                                                                                         
[    0.160394] pci 0000:00:04.1: PME# disabled                                                                                                                                     
[    0.160440] pci 0000:00:08.0: reg 20: [io  0xffa0-0xffaf]                                                                                                                       
[    0.160485] pci 0000:00:09.0: reg 10: [mem 0xfeb78000-0xfeb7bfff]                                                                                                               
[    0.160520] pci 0000:00:09.0: PME# supported from D3hot D3cold                                                                                                                   
[    0.160523] pci 0000:00:09.0: PME# disabled                                                                                                                                     
[    0.160602] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold                                                                                                         
[    0.160605] pci 0000:00:0b.0: PME# disabled                                                                                                                                     
[    0.160650] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold                                                                                                         
[    0.160653] pci 0000:00:0c.0: PME# disabled                                                                                                                                     
[    0.160697] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold                                                                                                         
[    0.160700] pci 0000:00:0d.0: PME# disabled                                                                                                                                     
[    0.160727] pci 0000:00:0e.0: reg 10: [io  0xe480-0xe487]                                                                                                                       
[    0.160731] pci 0000:00:0e.0: reg 14: [io  0xe400-0xe403]                                                                                                                       
[    0.160736] pci 0000:00:0e.0: reg 18: [io  0xe080-0xe087]                                                                                                                       
[    0.160740] pci 0000:00:0e.0: reg 1c: [io  0xe000-0xe003]                                                                                                                       
[    0.160745] pci 0000:00:0e.0: reg 20: [io  0xdc00-0xdc0f]                                                                                                                       
[    0.160749] pci 0000:00:0e.0: reg 24: [mem 0xfeb7c000-0xfeb7dfff]                                                                                                               
[    0.160793] pci 0000:00:0f.0: reg 10: [mem 0xfeb77000-0xfeb77fff]                                                                                                               
[    0.160798] pci 0000:00:0f.0: reg 14: [io  0xd880-0xd887]                                                                                                                       
[    0.160802] pci 0000:00:0f.0: reg 18: [mem 0xfeb7e800-0xfeb7e8ff]                                                                                                               
[    0.160807] pci 0000:00:0f.0: reg 1c: [mem 0xfeb7e400-0xfeb7e40f]                                                                                                               
[    0.160834] pci 0000:00:0f.0: supports D1 D2                                                                                                                                     
[    0.160836] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold                                                                                                         
[    0.160841] pci 0000:00:0f.0: PME# disabled                                                                                                                                     
[    0.160863] pci 0000:00:10.0: reg 10: [mem 0xfd000000-0xfdffffff]                                                                                                               
[    0.160870] pci 0000:00:10.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.160877] pci 0000:00:10.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.160884] pci 0000:00:10.0: reg 30: [mem 0xfeb40000-0xfeb5ffff pref]
[    0.160976] pci 0000:00:0a.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.160980] pci 0000:00:0a.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.160984] pci 0000:00:0a.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.160987] pci 0000:00:0a.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.160990] pci 0000:00:0a.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.160993] pci 0000:00:0a.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[    0.161055] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[    0.161060] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.161063] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.161068] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.161099] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    0.161103] pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.161106] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.161111] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.161142] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[    0.161146] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.161149] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.161154] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.161172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.161367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.161465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.161525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.161583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.172400] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.173222] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.173426] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.173629] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.173837] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.174047] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.174251] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.174454] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[    0.174662] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.174870] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.175101] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
[    0.175309] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7
[    0.175516] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
[    0.175731] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.175943] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[    0.176160] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.176399] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.176446] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none
[    0.176446] vgaarb: loaded
[    0.176446] SCSI subsystem initialized
[    0.176446] libata version 3.00 loaded.
[    0.177028] usbcore: registered new interface driver usbfs
[    0.177028] usbcore: registered new interface driver hub
[    0.177028] usbcore: registered new device driver usb
[    0.194016] raid6: int64x1   1835 MB/s
[    0.211026] raid6: int64x2   2074 MB/s
[    0.228025] raid6: int64x4   1750 MB/s
[    0.245025] raid6: int64x8   1273 MB/s
[    0.262009] raid6: sse2x1    3656 MB/s
[    0.279002] raid6: sse2x2    3917 MB/s
[    0.296010] raid6: sse2x4    6585 MB/s
[    0.296011] raid6: using algorithm sse2x4 (6585 MB/s)
[    0.296054] ACPI: WMI: Mapper loaded
[    0.296054] PCI: Using ACPI for IRQ routing
[    0.296054] PCI: pci_cache_line_size set to 64 bytes
[    0.296142] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.296145] reserve RAM buffer: 00000000affa0000 - 00000000afffffff
[    0.296164] NetLabel: Initializing
[    0.296164] NetLabel:  domain hash size = 128
[    0.296164] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.296164] NetLabel:  unlabeled traffic allowed by default
[    0.296164] Switching to clocksource tsc
[    0.296396] pnp: PnP ACPI init
[    0.296405] ACPI: bus type pnp registered
[    0.300920] pnp: PnP ACPI: found 13 devices
[    0.300922] ACPI: ACPI bus type pnp unregistered
[    0.300936] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.300939] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.300941] system 00:05: [io  0x4000-0x407f] has been reserved
[    0.300944] system 00:05: [io  0x4080-0x40ff] has been reserved
[    0.300947] system 00:05: [io  0x4400-0x447f] has been reserved
[    0.300949] system 00:05: [io  0x4480-0x44ff] has been reserved
[    0.300952] system 00:05: [io  0x4800-0x487f] has been reserved
[    0.300955] system 00:05: [io  0x4880-0x48ff] has been reserved
[    0.300958] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.300961] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.300964] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[    0.300967] system 00:05: [mem 0xfed02000-0xfed03fff] has been reserved
[    0.300970] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.300973] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.300979] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.300982] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.300988] system 00:0a: [io  0x0a00-0x0adf] has been reserved
[    0.300991] system 00:0a: [io  0x0ae0-0x0aef] has been reserved
[    0.300996] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.301001] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.301004] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[    0.301007] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.301010] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.301013] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.305856] pci 0000:00:0a.0: PCI bridge to [bus 01-01]
[    0.305858] pci 0000:00:0a.0:   bridge window [io  disabled]
[    0.305862] pci 0000:00:0a.0:   bridge window [mem disabled]
[    0.305865] pci 0000:00:0a.0:   bridge window [mem pref disabled]
[    0.305871] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[    0.305872] pci 0000:00:0b.0:   bridge window [io  disabled]
[    0.305876] pci 0000:00:0b.0:   bridge window [mem disabled]
[    0.305879] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    0.305883] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    0.305885] pci 0000:00:0c.0:   bridge window [io  disabled]
[    0.305889] pci 0000:00:0c.0:   bridge window [mem disabled]
[    0.305891] pci 0000:00:0c.0:   bridge window [mem pref disabled]
[    0.305896] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[    0.305898] pci 0000:00:0d.0:   bridge window [io  disabled]
[    0.305901] pci 0000:00:0d.0:   bridge window [mem disabled]
[    0.305904] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    0.305915] pci 0000:00:0a.0: setting latency timer to 64
[    0.305922] pci 0000:00:0b.0: setting latency timer to 64
[    0.305928] pci 0000:00:0c.0: setting latency timer to 64
[    0.305935] pci 0000:00:0d.0: setting latency timer to 64
[    0.305938] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.305940] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[    0.305943] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.305945] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffffffffffff]
[    0.305972] NET: Registered protocol family 2
[    0.306105] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.307483] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.312503] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.313098] TCP: Hash tables configured (established 524288 bind 65536)
[    0.313101] TCP reno registered
[    0.313121] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.313166] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.313341] NET: Registered protocol family 1
[    0.313505] RPC: Registered udp transport module.
[    0.313507] RPC: Registered tcp transport module.
[    0.313509] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.345649] pci 0000:00:10.0: Boot video device
[    0.345655] PCI: CLS 64 bytes, default 64
[    0.345719] Trying to unpack rootfs image as initramfs...
[    0.472731] Freeing initrd memory: 7800k freed
[    0.478650] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.478656] Placing 64MB software IO TLB between ffff88000219b000 - ffff88000619b000
[    0.478658] software IO TLB at phys 0x219b000 - 0x619b000
[    0.480011] audit: initializing netlink socket (disabled)
[    0.480029] type=2000 audit(1277233165.479:1): initialized
[    0.480316] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.483297] VFS: Disk quotas dquot_6.5.2
[    0.483368] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.484185] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.485444] Installing knfsd (copyright (C) 1996 [email protected]).
[    0.486108] Slow work thread pool: Starting up
[    0.486145] Slow work thread pool: Ready
[    0.486201] NTFS driver 2.1.29 [Flags: R/W].
[    0.486390] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.486501] QNX4 filesystem 0.2.3 registered.
[    0.486616] fuse init (API version 7.13)
[    0.486946] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.490903] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.491764] SGI XFS Quota Management subsystem
[    0.492052] Btrfs loaded
[    0.492286] aufs 2-standalone.tree-20100517
[    0.492294] msgmni has been set to 7410
[    0.492733] alg: No test for stdrng (krng)
[    0.492738] async_tx: api initialized (async)
[    0.492872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.492876] io scheduler noop registered
[    0.492878] io scheduler deadline registered
[    0.493012] io scheduler cfq registered (default)
[    0.493243] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.493269]   alloc irq_desc for 24 on node -1
[    0.493271]   alloc kstat_irqs on node -1
[    0.493281] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[    0.493391] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.493414]   alloc irq_desc for 25 on node -1
[    0.493416]   alloc kstat_irqs on node -1
[    0.493422] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[    0.493559] pcieport 0000:00:0d.0: setting latency timer to 64
[    0.493583]   alloc irq_desc for 26 on node -1
[    0.493584]   alloc kstat_irqs on node -1
[    0.493591] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[    0.493768] pcieport 0000:00:0b.0: Requesting control of PCIe PME from ACPI BIOS
[    0.493972] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    0.493977] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    0.493982] pcieport 0000:00:0c.0: Requesting control of PCIe PME from ACPI BIOS
[    0.493996] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    0.493999] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    0.494004] pcieport 0000:00:0d.0: Requesting control of PCIe PME from ACPI BIOS
[    0.494018] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    0.494021] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    0.527951] Linux agpgart interface v0.103
[    0.528373] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011680000, using 1536k, total 1536k
[    0.528376] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    0.528378] vesafb: scrolling: redraw
[    0.528380] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.540620] Console: switching to colour frame buffer device 128x48
[    0.628185] fbcondecor: console 0 using theme 'sabayon'
[    0.692134] fbcondecor: switched decor state to 'on' on console 0
[    0.692897] fb0: VESA VGA frame buffer device
[    0.693184] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.693189] ACPI: Power Button [PWRB]
[    0.693263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.693267] ACPI: Power Button [PWRF]
[    0.696928] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.943143] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.943899] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.932028] floppy0: no floppy controllers found
[    3.933839] brd: module loaded
[    3.934704] loop: module loaded
[    3.934706] Compaq SMART2 Driver (v 2.6.0)
[    3.934790] HP CISS Driver (v 3.6.20)
[    3.935227] MM: desc_per_page = 128
[    3.935456] Loading iSCSI transport class v2.0-870.
[    3.935926] fnic: Cisco FCoE HBA Driver, ver 1.4.0.98
[    3.936245] iscsi: registered transport (tcp)
[    3.936329] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    3.936331] Detecting Adaptec I2O RAID controllers...
[    3.936465] Adaptec aacraid driver 1.1-5[24702]-ms
[    3.936612] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    3.936853] QLogic Fibre Channel HBA Driver: 8.03.02-k2
[    3.936949] iscsi: registered transport (qla4xxx)
[    3.936992] QLogic iSCSI HBA Driver
[    3.936993] Emulex LightPulse Fibre Channel SCSI driver 8.3.10
[    3.936995] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    3.937377] DC390: clustering now enabled by default. If you get problems load
[    3.937379]        with "disable_clustering=1" and report to maintainers
[    3.937470] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    3.937583] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    3.937624] megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
[    3.937672] mpt2sas version 04.100.01.00 loaded
[    3.937813] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    3.937925] 3ware Storage Controller device driver for Linux v1.26.02.002.
[    3.937963] 3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
[    3.938011] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    3.938061] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
[    3.938102] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    3.938149] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    3.938231] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[    3.938271] iscsi: registered transport (cxgb3i)
[    3.938276] Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.0 (Dec 06, 2009)
[    3.938312] iscsi: registered transport (bnx2i)
[    3.938315] VMware PVSCSI driver - version 1.0.1.0-k
[    3.938360] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[    3.938438] osst :I: Tape driver with OnStream support version 0.99.4
[    3.938439] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    3.938705] ahci 0000:00:0e.0: version 3.0
[    3.939117] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    3.939122]   alloc irq_desc for 23 on node -1
[    3.939124]   alloc kstat_irqs on node -1
[    3.939133] ahci 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    3.939178]   alloc irq_desc for 27 on node -1
[    3.939180]   alloc kstat_irqs on node -1
[    3.939187] ahci 0000:00:0e.0: irq 27 for MSI/MSI-X
[    3.939193] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[    3.939243] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    3.939247] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pmp pio
[    3.939250] ahci 0000:00:0e.0: setting latency timer to 64
[    3.939681] scsi0 : ahci
[    3.939913] scsi1 : ahci
[    3.940019] scsi2 : ahci
[    3.940129] scsi3 : ahci
[    3.940313] ata1: SATA max UDMA/133 abar [email protected] port 0xfeb7c100 irq 27
[    3.940316] ata2: SATA max UDMA/133 abar [email protected] port 0xfeb7c180 irq 27
[    3.940319] ata3: SATA max UDMA/133 abar [email protected] port 0xfeb7c200 irq 27
[    3.940322] ata4: SATA max UDMA/133 abar [email protected] port 0xfeb7c280 irq 27
[    3.941313] pata_amd 0000:00:08.0: version 0.4.1
[    3.941363] pata_amd 0000:00:08.0: setting latency timer to 64
[    3.941436] scsi4 : pata_amd
[    3.941557] scsi5 : pata_amd
[    3.942761] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    3.942764] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    3.944811] Fixed MDIO Bus: probed
[    3.944907] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.1 (Feb 22, 2010)
[    3.944957] I2O subsystem v1.325
[    3.944959] i2o: max drivers = 8
[    3.945167] I2O Configuration OSM v1.323
[    3.945325] I2O Bus Adapter OSM v1.317
[    3.945358] I2O Block Device OSM v1.325
[    3.945539] I2O SCSI Peripheral OSM v1.316
[    3.945572] I2O ProcFS OSM v1.316
[    3.945612] Fusion MPT base driver 3.04.14
[    3.945614] Copyright (c) 1999-2008 LSI Corporation
[    3.945619] Fusion MPT SPI Host driver 3.04.14
[    3.945678] Fusion MPT FC Host driver 3.04.14
[    3.945726] Fusion MPT SAS Host driver 3.04.14
[    3.945772] Fusion MPT misc device (ioctl) driver 3.04.14
[    3.945858] mptctl: Registered with Fusion MPT base driver
[    3.945860] mptctl: /dev/mptctl @ (major,minor=10,220)
[    3.945862] Fusion MPT LAN driver 3.04.14
[    3.945960] usbmon: debugfs is not available
[    3.945961] Initializing USB Mass Storage driver...
[    3.946001] usbcore: registered new interface driver usb-storage
[    3.946056] USB Mass Storage support registered.
[    3.946110] usbcore: registered new interface driver libusual
[    3.946152] usbcore: registered new interface driver ums-alauda
[    3.946185] usbcore: registered new interface driver ums-cypress
[    3.946218] usbcore: registered new interface driver ums-datafab
[    3.946254] usbcore: registered new interface driver ums-freecom
[    3.946287] usbcore: registered new interface driver ums-isd200
[    3.946318] usbcore: registered new interface driver ums-jumpshot
[    3.946350] usbcore: registered new interface driver ums-karma
[    3.946383] usbcore: registered new interface driver ums-onetouch
[    3.946417] usbcore: registered new interface driver ums-sddr09
[    3.946449] usbcore: registered new interface driver ums-sddr55
[    3.946481] usbcore: registered new interface driver ums-usbat
[    3.946577] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    3.948817] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.948823] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.949164] mice: PS/2 mouse device common for all mice
[    3.949634] rtc_cmos 00:06: RTC can wake from S4
[    3.949726] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    3.949759] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    3.949796] md: linear personality registered for level -1
[    3.949798] md: raid0 personality registered for level 0
[    3.949800] md: raid1 personality registered for level 1
[    3.949802] md: raid10 personality registered for level 10
[    3.949804] md: raid6 personality registered for level 6
[    3.949806] md: raid5 personality registered for level 5
[    3.949807] md: raid4 personality registered for level 4
[    3.949809] md: multipath personality registered for level -4
[    3.949811] md: faulty personality registered for level -5
[    3.949993] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[    3.950283] cpuidle: using governor ladder
[    3.950285] cpuidle: using governor menu
[    3.950395] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.951452] usbcore: registered new interface driver hiddev
[    3.951487] usbcore: registered new interface driver usbhid
[    3.951489] usbhid: USB HID core driver
[    3.951735] TCP bic registered
[    3.951739] NET: Registered protocol family 17
[    3.952836] TuxOnIce 3.1 (http://tuxonice.net)
[    3.952889] Scanning swap devices for TuxOnIce signature...
[    3.953043] TuxOnIce scan: No image found.
[    3.976242] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    4.245027] ata4: SATA link down (SStatus 0 SControl 300)
[    4.245044] ata2: SATA link down (SStatus 0 SControl 300)
[    4.398150] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.398165] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.398953] ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133
[    4.398956] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.399964] ata1.00: ATAPI: ATAPI   iHAS124   Y, BL0X, max UDMA/100
[    4.399967] ata3.00: configured for UDMA/133
[    4.401953] ata1.00: configured for UDMA/100
[    4.403614] scsi 0:0:0:0: CD-ROM            ATAPI    iHAS124   Y      BL0X PQ: 0 ANSI: 5
[    4.408086] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.408091] Uniform CD-ROM driver Revision: 3.20
[    4.408256] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.408392] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.408544] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
[    4.408740] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    4.408791] sd 2:0:0:0: [sda] Write Protect is off
[    4.408793] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.408815] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.408938]  sda:
[    4.409068] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.409179] ata6: port disabled. ignoring.
[    4.417132]  sda1 sda2
[    4.417475] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.417481] Scanning swap devices for TuxOnIce signature...
[    4.446601] TuxOnIce scan: No image found.
[    4.446616] TuxOnIce: Can't translate "" into a device id yet.
[    4.446619] TuxOnIce: No matching enabled allocator found. Resuming disabled.
[    4.446636] registered taskstats version 1
[    4.446975] rtc_cmos 00:06: setting system clock to 2010-06-22 18:59:29 UTC (1277233169)
[    4.447060] Freeing unused kernel memory: 588k freed
[    4.798308] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    5.022567] scsi: <fdomain> Detection failed (no card)
[    5.081198] imm: Version 2.05 (for Linux 2.4.0)
[    5.163188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.163589] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    5.163594]   alloc irq_desc for 22 on node -1
[    5.163596]   alloc kstat_irqs on node -1
[    5.163604] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    5.163636] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    5.163639] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    5.163666] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    5.163692] ehci_hcd 0000:00:04.1: debug port 1
[    5.163700] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    5.163717] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfeb7ec00
[    5.169026] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    5.169066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.169071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.169075] usb usb1: Product: EHCI Host Controller
[    5.169078] usb usb1: Manufacturer: Linux 2.6.34-sabayon ehci_hcd
[    5.169082] usb usb1: SerialNumber: 0000:00:04.1
[    5.169590] hub 1-0:1.0: USB hub found
[    5.169596] hub 1-0:1.0: 8 ports detected
[    5.194558] uhci_hcd: USB Universal Host Controller Interface driver
[    5.213485] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.213927] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[    5.213932]   alloc irq_desc for 21 on node -1
[    5.213934]   alloc kstat_irqs on node -1
[    5.213942] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[    5.213973] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    5.213976] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    5.213992] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    5.214023] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfeb7f000
[    5.267052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.267055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.267057] usb usb2: Product: OHCI Host Controller
[    5.267059] usb usb2: Manufacturer: Linux 2.6.34-sabayon ohci_hcd
[    5.267061] usb usb2: SerialNumber: 0000:00:04.0
[    5.267351] hub 2-0:1.0: USB hub found
[    5.267357] hub 2-0:1.0: 8 ports detected
[    5.287959] sl811: driver sl811-hcd, 19 May 2005
[    5.369023] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[    5.369026] Copyright (c) 1999-2006 Intel Corporation.
[    9.743819] EXT3-fs (dm-1): error: couldn't mount because of unsupported optional features (240)
[    9.743950] EXT2-fs (dm-1): error: couldn't mount because of unsupported optional features (244)
[    9.744498] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[    9.744504] EXT4-fs (dm-1): write access will be enabled during recovery
[    9.774092] EXT4-fs (dm-1): recovery complete
[    9.774495] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[   11.950319] udev: starting version 154
[   12.094408] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   12.094431] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[   12.106534] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   12.106927] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[   12.106932]   alloc irq_desc for 20 on node -1
[   12.106934]   alloc kstat_irqs on node -1
[   12.106944] forcedeth 0000:00:0f.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[   12.106950] forcedeth 0000:00:0f.0: setting latency timer to 64
[   12.201303] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   12.619575] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:db:e7:1d:73
[   12.619580] forcedeth 0000:00:0f.0: highdma pwrctl mgmt lnktim msi desc-v3
[   12.832747] Error: Driver 'pcspkr' is already registered, aborting...
[   12.972283] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[   12.972315] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[   12.972642] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   12.972647] HDA Intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[   12.972650] hda_intel: Disable MSI for Nvidia chipset
[   12.972717] HDA Intel 0000:00:09.0: setting latency timer to 64
[   13.070104] nvidia: module license 'NVIDIA' taints kernel.
[   13.070108] Disabling lock debugging due to kernel taint
[   13.782149] hda_codec: ALC888: BIOS auto-probing.
[   13.872120] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input5
[   13.972130] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
[   13.972143] nvidia 0000:00:10.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22
[   13.972151] nvidia 0000:00:10.0: setting latency timer to 64
[   13.972154] vgaarb: device changed decodes: PCI:0000:00:10.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   13.972408] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  195.36.24  Thu Apr 22 19:10:14 PDT 2010
[   16.066333] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   16.100402] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[   16.127695] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[   16.160600] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[   21.565230] fbcondecor: console 1 using theme 'sabayon'
[   21.636993] fbcondecor: switched decor state to 'on' on console 1
[   21.822528] fbcondecor: console 2 using theme 'sabayon'
[   22.179475] fbcondecor: switched decor state to 'on' on console 2
[   22.256278] fbcondecor: console 3 using theme 'sabayon'
[   22.328690] fbcondecor: switched decor state to 'on' on console 3
[   22.406175] fbcondecor: console 4 using theme 'sabayon'
[   22.478349] fbcondecor: switched decor state to 'on' on console 4
[   22.596184] fbcondecor: console 5 using theme 'sabayon'
[   22.668500] fbcondecor: switched decor state to 'on' on console 5
[   23.673708] NET: Registered protocol family 10
[   23.673981] lo: Disabled Privacy Extensions
[   24.544329]   alloc irq_desc for 28 on node -1
[   24.544333]   alloc kstat_irqs on node -1
[   24.544344] forcedeth 0000:00:0f.0: irq 28 for MSI/MSI-X
[   33.624358] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[   34.986021] eth0: no IPv6 routers present

sabayon hans # ifconfig
eth0      Link encap:Ethernet  HWaddr 00:19:db:e7:1d:73 
          inet addr:192.168.2.102  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::219:dbff:fee7:1d73/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1180 (1.1 KiB)  TX bytes:1298 (1.2 KiB)
          Interrupt:28

lo        Link encap:Místní smyčka 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2480 (2.4 KiB)  TX bytes:2480 (2.4 KiB)

sabayon hans # ping -c 10 www.google.com
ping: unknown host www.google.com
migi
Baby Hen
 
Posts: 4
Joined: Tue Jun 22, 2010 16:54

Re: eth0 not working, forcedeth?

Postby migi » Wed Jun 23, 2010 9:58

Hi, I remember all computers on my LAN to work DHCP need the DNS nameserver. I try add DNS servers, but its not work. I returned back all changes for sure. But can you say me, how set on sabayon the dns nameservers?
Image

I try dhcpcd command too, but not work.
Code: Select all
sabayon hans # dhcpcd eth0
dhcpcd: version 5.2.2 starting
dhcpcd: eth0: broadcasting for a lease
dhcpcd: eth0: offered 192.168.2.102 from 192.168.2.1
dhcpcd: eth0: acknowledged 192.168.2.102 from 192.168.2.1
dhcpcd: eth0: leased 192.168.2.102 for 946080000 seconds
dhcpcd: forking to background

sabayon hans # ping www.google.com
ping: unknown host www.google.com
migi
Baby Hen
 
Posts: 4
Joined: Tue Jun 22, 2010 16:54

Re: eth0 not working, forcedeth?

Postby Fitzcarraldo » Wed Jun 23, 2010 10:42

DHCP but user-specified DNS servers? Can't you change the router settings instead? Anyway, there are several options for configuring a PC to have user-specified DNS servers with DHCP. Here are a few alternative ways to do it:

1. Click on the NetworkManager icon in Panel, and click on Manage Connections.. Click on the Wired tab. Click on Add... to add a new connection. Click on the IP Address tab. For the Method, select Automatic DHCP (Addresses only). Enter the DNS server addresses in the field.

2. Edit /etc/resolv.conf (either every time you boot up or, alternatively, you could write protect it).

3. Uninstall NetworkManager and install Wicd (see HOWTO: Replace NM with WICD).

4. Edit /etc/dhcp/dhclient.conf and add a line:

Code: Select all
prepend domain-name-servers xxx.xxx.xxx.xxx, yyy.yyy.yyy.yyy;
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7985
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom

Re: eth0 not working, forcedeth?

Postby migi » Wed Jun 23, 2010 11:50

alternative number 1 is working, its so easy, im stupid

thank you so much :P
migi
Baby Hen
 
Posts: 4
Joined: Tue Jun 22, 2010 16:54

Re: eth0 not working, forcedeth?

Postby Fitzcarraldo » Wed Jun 23, 2010 11:57

You're welcome. Glad you got it working.

When you have solved your problem, please mark the thread solved. To do this click on the EDIT button in the first post and append " [Solved]" to the Subject text. Thanks. I'll do it for you this time.

:arrow: Why, and how to add "[Solved]" to your post. Please read.
User avatar
Fitzcarraldo
Sagely Hen
 
Posts: 7985
Joined: Sat Mar 10, 2007 5:40
Location: United Kingdom


Return to Networking and Wireless

Who is online

Users browsing this forum: No registered users and 1 guest