Problem with wireless card

Issues Related to Networking (Wired and Wireless)

Moderator: Moderators

Problem with wireless card

Postby Cineris » Mon Feb 25, 2008 16:58

I finally managed to get Sabayon installed, and now I'm trying to get everything to work. The first thing I want to get to work is the wireless card, so I can get online and finish updating/downloading and such.

I have an Intel Wireless WiFi Link 4965AGN wireless card and I cannot get my network manager to work. Help please!

Need more info, just let me know!
Cineris
Baby Hen
 
Posts: 1
Joined: Mon Feb 25, 2008 5:44

Re: Problem with wireless card

Postby chickpea » Tue Feb 26, 2008 17:47

Please post output of the following:

lspci

lsmod

dmesg

lsusb
chickpea
Sagely Hen
 
Posts: 1084
Joined: Fri Jan 05, 2007 15:08
Location: Washington, DC

Re: Problem with wireless card

Postby bokoio » Thu Feb 28, 2008 22:04

the same situacion

but my card is other. bcm43xx.
.
localhost xxx # lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:06.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
localhost xxx # lsmod
Module Size Used by
nls_iso8859_1 5120 1
nls_cp437 6784 1
snd_seq_dummy 4740 0
snd_seq_oss 30228 0
snd_seq_midi_event 7808 1 snd_seq_oss
snd_seq 47284 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8716 3 snd_seq_dummy,snd_seq_oss,snd_seq
ipv6 254948 14
sisfb 202452 0
ohci_hcd 23684 0
ac 6532 0
battery 13064 0
bcm43xx 113620 0
ieee80211softmac 28032 1 bcm43xx
ieee80211 32328 2 bcm43xx,ieee80211softmac
ieee80211_crypt 6784 1 ieee80211
snd_intel8x0 32412 0
snd_ac97_codec 92196 1 snd_intel8x0
shpchp 32020 0
k8temp 6272 0
ssb 34180 1 ohci_hcd
i2c_sis96x 6148 0
ac97_bus 3200 1 snd_ac97_codec
yenta_socket 25740 1
pcspkr 3968 0
pci_hotplug 28960 1 shpchp
sis900 22528 0
pcmcia 38260 1 ssb
rsrc_nonstatic 13312 1 yenta_socket
i2c_core 24064 1 i2c_sis96x
joydev 10688 0
tg3 101124 0
e1000 112192 0
scsi_wait_scan 2304 0
sl811_hcd 12416 0
uhci_hcd 23696 0
ehci_hcd 32652 0
localhost player # dmesg
version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order. Total pages: 227315
[ 0.000000] Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=UUID=d1116dfc-412d-4b3c-b001-f2b87b706564 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1800.071 MHz processor.
[ 12.882797] Console: colour dummy device 80x25
[ 12.882801] console [tty0] enabled
[ 12.883327] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 12.884195] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.900281] Memory: 889404k/916416k available (6278k kernel code, 26336k reserved, 2374k data, 524k init, 0k highmem)
[ 12.900289] virtual kernel memory layout:
[ 12.900290] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 12.900292] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 12.900293] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
[ 12.900294] lowmem : 0xc0000000 - 0xf7ef0000 ( 894 MB)
[ 12.900295] .init : 0xc097e000 - 0xc0a01000 ( 524 kB)
[ 12.900297] .data : 0xc0721a73 - 0xc09735b4 (2374 kB)
[ 12.900298] .text : 0xc0100000 - 0xc0721a73 (6278 kB)
[ 12.900301] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.900337] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 12.960253] Calibrating delay using timer specific routine.. 3600.96 BogoMIPS (lpj=1800482)
[ 12.960277] Security Framework v1.0.0 initialized
[ 12.960282] SELinux: Initializing.
[ 12.960290] SELinux: Starting in permissive mode
[ 12.960303] selinux_register_security: Registering secondary module capability
[ 12.960305] Capability LSM initialized as secondary
[ 12.960314] Mount-cache hash table entries: 512
[ 12.960443] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[ 12.960452] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 12.960454] CPU: L2 Cache: 128K (64 bytes/line)
[ 12.960457] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
[ 12.960464] Intel machine check architecture supported.
[ 12.960467] Intel machine check reporting enabled on CPU#0.
[ 12.960473] Compat vDSO mapped to ffffe000.
[ 12.960483] Checking 'hlt' instruction... OK.
[ 12.965179] SMP alternatives: switching to UP code
[ 12.966580] Freeing SMP alternatives: 28k freed
[ 12.966596] ACPI: Core revision 20070126
[ 12.970458] CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
[ 12.970479] Total of 1 processors activated (3600.96 BogoMIPS).
[ 12.970635] ENABLING IO-APIC IRQs
[ 12.970827] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 13.082089] Brought up 1 CPUs
[ 13.082318] xor: automatically using best checksumming function: pIII_sse
[ 13.087052] pIII_sse : 5716.000 MB/sec
[ 13.087054] xor: using function: pIII_sse (5716.000 MB/sec)
[ 13.087088] NET: Registered protocol family 16
[ 13.087277] No dock devices found.
[ 13.087431] EISA bus registered
[ 13.087453] ACPI: bus type pci registered
[ 13.087649] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
[ 13.087653] PCI: Using configuration type 1
[ 13.087654] Setting up standard PCI resources
[ 13.091606] ACPI: EC: Look up EC in DSDT
[ 13.091712] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 13.106310] ACPI: Interpreter enabled
[ 13.106315] ACPI: (supports S0 S3 S4 S5)
[ 13.106324] ACPI: Using IOAPIC for interrupt routing
[ 13.108863] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 13.108907] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.109062] Enabling SiS 96x SMBus.
[ 13.109520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.115123] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 13.115199] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11)
[ 13.115269] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
[ 13.115338] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 9 10 11)
[ 13.115421] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 13.115491] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 13.115557] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 13.115628] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 13.115745] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.115772] pnp: PnP ACPI init
[ 13.115781] ACPI: bus type pnp registered
[ 13.117151] pnp: PnP ACPI: found 8 devices
[ 13.117154] ACPI: ACPI bus type pnp unregistered
[ 13.117158] PnPBIOS: Disabled by ACPI PNP
[ 13.117354] SCSI subsystem initialized
[ 13.117378] libata version 2.21 loaded.
[ 13.117538] usbcore: registered new interface driver usbfs
[ 13.117592] usbcore: registered new interface driver hub
[ 13.117630] usbcore: registered new device driver usb
[ 13.117750] PCI: Using ACPI for IRQ routing
[ 13.117754] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.124006] NetLabel: Initializing
[ 13.124008] NetLabel: domain hash size = 128
[ 13.124010] NetLabel: protocols = UNLABELED CIPSOv4
[ 13.124021] NetLabel: unlabeled traffic allowed by default
[ 13.124286] ACPI: RTC can wake from S4
[ 13.124987] Time: tsc clocksource has been installed.
[ 13.127025] pnp: 00:04: ioport range 0x8000-0x807f has been reserved
[ 13.127028] pnp: 00:04: ioport range 0x8080-0x80ff has been reserved
[ 13.127031] pnp: 00:04: ioport range 0x8100-0x811f has been reserved
[ 13.127034] pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 13.127039] pnp: 00:04: iomem range 0xfec00000-0xfecfffff has been reserved
[ 13.127045] pnp: 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 13.127048] pnp: 00:04: iomem range 0xfee00000-0xfeefffff has been reserved
[ 13.127051] pnp: 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 13.157071] PCI: Bridge: 0000:00:01.0
[ 13.157074] IO window: a000-afff
[ 13.157078] MEM window: e2100000-e21fffff
[ 13.157081] PREFETCH window: e8000000-efffffff
[ 13.157085] PCI: Bus 2, cardbus bridge: 0000:00:06.0
[ 13.157087] IO window: 00002400-000024ff
[ 13.157090] IO window: 00002800-000028ff
[ 13.157093] PREFETCH window: 50000000-53ffffff
[ 13.157097] MEM window: 54000000-57ffffff
[ 13.157112] PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
[ 13.157123] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 13.157142] NET: Registered protocol family 2
[ 13.166964] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.167148] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 13.168899] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.169496] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.169500] TCP reno registered
[ 13.172069] checking if image is initramfs... it is
[ 13.562302] Freeing initrd memory: 7630k freed
[ 13.562470] Simple Boot Flag at 0x38 set to 0x1
[ 13.562978] audit: initializing netlink socket (disabled)
[ 13.562994] audit(1204232912.558:1): initialized
[ 13.563047] Total HugeTLB memory allocated, 0
[ 13.565431] VFS: Disk quotas dquot_6.5.1
[ 13.565445] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.565792] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 13.566843] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.567345] NTFS driver 2.1.28 [Flags: R/W].
[ 13.567594] QNX4 filesystem 0.2.3 registered.
[ 13.567598] fuse init (API version 7.8)
[ 13.567916] JFS: nTxBlock = 7010, nTxLock = 56084
[ 13.572791] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 13.573393] SGI XFS Quota Management subsystem
[ 13.573404] Registering unionfs 2.1.11 (for 2.6.23.9)
[ 13.573931] aufs 20071015
[ 13.574014] SELinux: Registering netfilter hooks
[ 13.574134] async_tx: api initialized (async)
[ 13.574260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 13.574263] io scheduler noop registered
[ 13.574266] io scheduler anticipatory registered
[ 13.574268] io scheduler deadline registered
[ 13.574296] io scheduler cfq registered (default)
[ 13.998500] Boot video device is 0000:01:00.0
[ 14.025526] lp: driver loaded but no devices found
[ 14.025636] Real Time Clock Driver v1.12ac
[ 14.025711] toshiba: not a supported Toshiba laptop
[ 14.033133] ppdev: user-space parallel port driver
[ 14.033138] Linux agpgart interface v0.102
[ 14.033220] agpgart: Detected AGP bridge 0
[ 14.034593] agpgart: AGP aperture is 32M @ 0xe0000000
[ 14.034756] vesafb: framebuffer at 0xe8000000, mapped to 0xf8c80000, using 3072k, total 16384k
[ 14.034759] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[ 14.034762] vesafb: protected mode interface info at cbe6:000c
[ 14.034764] vesafb: pmi: set display start = c00cbe96, set palette = c00cbeda
[ 14.034766] vesafb: scrolling: redraw
[ 14.034769] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 14.043626] Console: switching to colour frame buffer device 128x48
[ 14.176977] fbcondecor: console 0 using theme 'sabayon'
[ 14.208762] fbcondecor: switched decor state to 'on' on console 0
[ 14.209314] fb0: VESA VGA frame buffer device
[ 14.209445] input: Power Button (FF) as /class/input/input0
[ 14.209451] ACPI: Power Button (FF) [PWRF]
[ 14.209547] input: Lid Switch as /class/input/input1
[ 14.209549] ACPI: Lid Switch [LID]
[ 14.209629] input: Power Button (CM) as /class/input/input2
[ 14.209632] ACPI: Power Button (CM) [PWRB]
[ 14.209699] input: Sleep Button (CM) as /class/input/input3
[ 14.209702] ACPI: Sleep Button (CM) [SLPB]
[ 14.209879] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.212937] ACPI: Thermal Zone [THRM] (56 C)
[ 14.213029] isapnp: Scanning for PnP cards...
[ 14.524987] isapnp: No Plug & Play device found
[ 14.524992] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.525496] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[ 14.525503] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 17.531276] floppy0: no floppy controllers found
[ 17.531761] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 17.532004] loop: module loaded
[ 17.532006] Compaq SMART2 Driver (v 2.6.0)
[ 17.532051] HP CISS Driver (v 3.6.14)
[ 17.532240] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 17.532290] MM: desc_per_page = 128
[ 17.532539] input: Macintosh mouse button emulation as /class/input/input4
[ 17.532695] Loading iSCSI transport class v2.0-724.
[ 17.532997] iscsi: registered transport (tcp)
[ 17.533204] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 17.533206] Detecting Adaptec I2O RAID controllers...
[ 17.533800] Adaptec aacraid driver 1.1-5[2449]-ms
[ 17.533979] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 17.534164] NCR53c406a: no available ports found
[ 17.534170] sym53c416.c: Version 1.0.0-ac
[ 17.534190] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[ 17.534485] iscsi: registered transport (qla4xxx)
[ 17.534525] QLogic iSCSI HBA Driver
[ 17.534528] Emulex LightPulse Fibre Channel SCSI driver 8.2.2
[ 17.534529] Copyright(c) 2004-2007 Emulex. All rights reserved.
[ 17.534590] seagate: ST0x/TMC-8xx not detected.
[ 17.556238] Failed initialization of WD-7000 SCSI card!
[ 17.912161] DC390: clustering now enabled by default. If you get problems load
[ 17.912163] with "disable_clustering=1" and report to maintainers
[ 17.912230] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 17.912234] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 17.912268] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 17.912336] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 17.912392] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 17.912452] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 17.912487] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
[ 17.912520] nsp32: loading...
[ 17.912555] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 17.912590] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 17.912622] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 17.912664] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 17.912720] osst :I: Tape driver with OnStream support version 0.99.4
[ 17.912721] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 17.914525] pata_sis 0000:00:02.5: version 0.5.2
[ 17.914556] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18
[ 17.914749] scsi2 : pata_sis
[ 17.914848] scsi3 : pata_sis
[ 17.914900] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012000 irq 14
[ 17.914904] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012008 irq 15
[ 18.068687] ata1.00: ATA-6: ST9808210A, 3.01, max UDMA/100
[ 18.068690] ata1.00: 156301488 sectors, multi 16: LBA48
[ 18.074670] ata1.00: configured for UDMA/100
[ 18.379186] ata2.00: ATAPI: MATSHITAUJ-840D, 1.03, max UDMA/33
[ 18.535922] ata2.00: configured for UDMA/33
[ 18.536032] scsi 2:0:0:0: Direct-Access ATA ST9808210A 3.01 PQ: 0 ANSI: 5
[ 18.536179] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 18.536190] sd 2:0:0:0: [sda] Write Protect is off
[ 18.536193] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.536208] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.536250] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 18.536259] sd 2:0:0:0: [sda] Write Protect is off
[ 18.536261] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.536276] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.536280] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 18.611110] sd 2:0:0:0: [sda] Attached SCSI disk
[ 18.611177] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 18.613118] scsi 3:0:0:0: CD-ROM MATSHITA UJ-840D 1.03 PQ: 0 ANSI: 5
[ 18.619155] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 18.619159] Uniform CD-ROM driver Revision: 3.20
[ 18.619231] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 18.619295] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 18.619458] I2O subsystem v1.325
[ 18.619460] i2o: max drivers = 8
[ 18.619559] I2O Configuration OSM v1.323
[ 18.619620] I2O Bus Adapter OSM v1.317
[ 18.619644] I2O Block Device OSM v1.325
[ 18.619776] I2O SCSI Peripheral OSM v1.316
[ 18.619800] I2O ProcFS OSM v1.316
[ 18.619827] Fusion MPT base driver 3.04.05
[ 18.619829] Copyright (c) 1999-2007 LSI Logic Corporation
[ 18.619833] Fusion MPT SPI Host driver 3.04.05
[ 18.619883] Fusion MPT FC Host driver 3.04.05
[ 18.619924] Fusion MPT SAS Host driver 3.04.05
[ 18.619964] Fusion MPT misc device (ioctl) driver 3.04.05
[ 18.620007] mptctl: Registered with Fusion MPT base driver
[ 18.620009] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 18.620012] Fusion MPT LAN driver 3.04.05
[ 18.620345] usbcore: registered new interface driver usblp
[ 18.620348] Initializing USB Mass Storage driver...
[ 18.620379] usbcore: registered new interface driver usb-storage
[ 18.620381] USB Mass Storage support registered.
[ 18.620411] usbcore: registered new interface driver libusual
[ 18.620499] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.623583] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.623588] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.630860] parkbd: no such parport
[ 18.631085] mice: PS/2 mouse device common for all mice
[ 18.663042] input: AT Translated Set 2 keyboard as /class/input/input5
[ 19.233941] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 19.268461] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 19.271024] md: linear personality registered for level -1
[ 19.271026] md: raid0 personality registered for level 0
[ 19.271028] md: raid1 personality registered for level 1
[ 19.271030] md: raid10 personality registered for level 10
[ 19.287355] raid6: int32x1 710 MB/s
[ 19.304303] raid6: int32x2 738 MB/s
[ 19.321298] raid6: int32x4 683 MB/s
[ 19.338248] raid6: int32x8 500 MB/s
[ 19.355236] raid6: mmxx1 1496 MB/s
[ 19.372186] raid6: mmxx2 2722 MB/s
[ 19.389158] raid6: sse1x1 1292 MB/s
[ 19.406127] raid6: sse1x2 2105 MB/s
[ 19.423090] raid6: sse2x1 1960 MB/s
[ 19.440061] raid6: sse2x2 2750 MB/s
[ 19.440063] raid6: using algorithm sse2x2 (2750 MB/s)
[ 19.440066] md: raid6 personality registered for level 6
[ 19.440068] md: raid5 personality registered for level 5
[ 19.440070] md: raid4 personality registered for level 4
[ 19.440072] md: multipath personality registered for level -4
[ 19.440075] md: faulty personality registered for level -5
[ 19.440214] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 19.440389] EISA: Probing bus 0 at eisa.0
[ 19.440397] Cannot allocate resource for EISA slot 1
[ 19.440400] Cannot allocate resource for EISA slot 2
[ 19.440421] Cannot allocate resource for EISA slot 8
[ 19.440422] EISA: Detected 0 cards.
[ 19.440522] cpuidle: using governor ladder
[ 20.439507] cpuidle: using governor menu
[ 20.439554] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 20.439593] usbcore: registered new interface driver hiddev
[ 20.439623] usbcore: registered new interface driver usbhid
[ 20.439625] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 20.439671] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
[ 20.439711] ALSA device list:
[ 20.439713] No soundcards found.
[ 20.439825] TCP bic registered
[ 20.439840] NET: Registered protocol family 1
[ 20.439848] NET: Registered protocol family 17
[ 20.439990] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.00.00)
[ 20.440028] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
[ 20.440031] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
[ 20.440033] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
[ 20.440094] Using IPI No-Shortcut mode
[ 20.440515] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 20.441063] Freeing unused kernel memory: 524k freed
[ 20.807024] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.807038] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 20.807148] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 20.807180] PCI: cache line size of 64 is not supported by device 0000:00:03.2
[ 20.807192] ehci_hcd 0000:00:03.2: irq 19, io mem 0xe2004000
[ 20.812755] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.812918] usb usb1: configuration #1 chosen from 1 choice
[ 20.812961] hub 1-0:1.0: USB hub found
[ 20.812969] hub 1-0:1.0: 6 ports detected
[ 20.959784] USB Universal Host Controller Interface driver v3.0
[ 21.079131] sl811: driver sl811-hcd, 19 May 2005
[ 21.523776] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[ 21.523779] Copyright (c) 1999-2006 Intel Corporation.
[ 23.881599] Switched to high resolution mode on CPU 0
[ 32.605581] TuxOnIce: Resume= parameter is empty. Hibernating will be disabled.
[ 32.788571] kjournald starting. Commit interval 5 seconds
[ 32.788586] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.649328] sis900.c: v1.08.10 Apr. 2 2006
[ 36.649395] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 36.654341] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[ 36.659991] 0000:00:04.0: Using transceiver found at address 13 as default
[ 36.699004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 36.705855] input: PC Speaker as /class/input/input7
[ 36.777029] ohci_hcd: Unknown symbol ssb_device_disable
[ 36.777081] ohci_hcd: Unknown symbol ssb_admatch_base
[ 36.777173] ohci_hcd: Unknown symbol ssb_device_enable
[ 36.777253] ohci_hcd: Unknown symbol ssb_driver_unregister
[ 36.777321] ohci_hcd: Unknown symbol __ssb_driver_register
[ 36.777634] ohci_hcd: Unknown symbol ssb_admatch_size
[ 36.828406] ieee80211_crypt: registered algorithm 'NULL'
[ 36.836542] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 16, 00:16:36:3a:5d:0a.
[ 36.836677] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 36.847409] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
[ 36.847424] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 36.847426] Yenta: Routing CardBus interrupts to PCI
[ 36.847430] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
[ 36.862368] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 36.862372] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 37.006325] bcm43xx driver
[ 37.025271] ACPI: Battery Slot [BAT1] (battery absent)
[ 37.047564] ACPI: AC Adapter [ACAD] (on-line)
[ 37.076781] Yenta: ISA IRQ mask 0x06f8, PCI irq 16
[ 37.076785] Socket status: 30000007
[ 37.334669] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
[ 37.408070] cs: IO port probe 0x100-0x3af: clean.
[ 37.409697] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[ 37.410359] cs: IO port probe 0x820-0x8ff: clean.
[ 37.410940] cs: IO port probe 0xc00-0xcf7: clean.
[ 37.411661] cs: IO port probe 0xa00-0xaff: clean.
[ 38.146589] intel8x0_measure_ac97_clock: measured 50472 usecs
[ 38.146592] intel8x0: clocking to 48000
[ 38.148372] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.151620] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 20
[ 38.169480] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 38.169980] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 38.170000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 38.170467] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 38.170492] ohci_hcd 0000:00:03.0: irq 21, io mem 0xe2002000
[ 38.220617] usb usb2: configuration #1 chosen from 1 choice
[ 38.220645] hub 2-0:1.0: USB hub found
[ 38.220657] hub 2-0:1.0: 3 ports detected
[ 38.321474] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 22
[ 38.321491] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 38.321549] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 38.321566] ohci_hcd 0000:00:03.1: irq 22, io mem 0xe2003000
[ 38.372399] usb usb3: configuration #1 chosen from 1 choice
[ 38.372427] hub 3-0:1.0: USB hub found
[ 38.372437] hub 3-0:1.0: 3 ports detected
[ 38.527199] sisfb: Video ROM found
[ 38.527337] sisfb: Fatal error: Unable to reserve 128MB framebuffer memory
[ 38.527339] sisfb: Is there another framebuffer driver active?
[ 38.582994] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 38.771664] usb 2-2: configuration #1 chosen from 1 choice
[ 38.781803] input: USB OpticalWheel Mouse as /class/input/input8
[ 38.781866] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:03.0-2
[ 41.641412] EXT3 FS on sda6, internal journal
[ 43.068055] kjournald starting. Commit interval 5 seconds
[ 43.068220] EXT3 FS on sda7, internal journal
[ 43.068226] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.174978] Adding 3140668k swap on /dev/sda8. Priority:-1 extents:1 across:3140668k
[ 43.666009] Clocksource tsc unstable (delta = 9372382371 ns)
[ 43.693458] Time: acpi_pm clocksource has been installed.
[ 64.297081] fbcondecor: console 1 using theme 'sabayon'
[ 64.325290] NET: Registered protocol family 10
[ 64.325401] lo: Disabled Privacy Extensions
[ 65.051680] fbcondecor: switched decor state to 'on' on console 1
[ 67.500549] fbcondecor: console 2 using theme 'sabayon'
[ 67.682692] fbcondecor: switched decor state to 'on' on console 2
[ 67.916496] fbcondecor: console 3 using theme 'sabayon'
[ 68.084659] fbcondecor: switched decor state to 'on' on console 3
[ 68.265299] fbcondecor: console 4 using theme 'sabayon'
[ 68.908963] fbcondecor: switched decor state to 'on' on console 4
[ 69.160499] fbcondecor: console 5 using theme 'sabayon'
[ 69.417072] fbcondecor: switched decor state to 'on' on console 5
[ 69.621431] fbcondecor: console 6 using theme 'sabayon'
[ 69.896694] fbcondecor: switched decor state to 'on' on console 6
[ 70.078003] fbcondecor: console 7 using theme 'sabayon'
[ 70.251043] fbcondecor: switched decor state to 'on' on console 7
[ 70.431250] fbcondecor: console 8 using theme 'sabayon'
[ 71.271814] fbcondecor: switched decor state to 'on' on console 8
[ 71.556674] fbcondecor: console 9 using theme 'sabayon'
[ 71.746535] bcm43xx: Radio disabled by hardware
[ 71.893797] fbcondecor: switched decor state to 'on' on console 9
[ 72.017068] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 72.159500] fbcondecor: console 10 using theme 'sabayon'
[ 72.344804] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 72.359544] NFSD: starting 90-second grace period
[ 72.928881] fbcondecor: switched decor state to 'on' on console 10
[ 74.230732] eth0: Media Link On 100mbps full-duplex
[ 74.992428] fbcondecor: console 6 using theme 'sabayon'
[ 75.011578] fbcondecor: switched decor state to 'on' on console 6
[ 84.209720] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 85.208828] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 88.878699] eth0: no IPv6 routers present
[ 167.359135] Marking TSC unstable due to: cpufreq changes.
[ 949.633234] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
[ 949.633241] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 949.643276] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
[ 949.643283] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 949.888319] bcm43xx: Radio hardware status changed to enabled
[ 2158.840282] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[ 2158.840292] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[ 2158.850330] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
[ 2158.850340] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[ 2159.647506] bcm43xx: Radio hardware status changed to disabled
[ 2179.988895] bcm43xx: Radio disabled by hardware
[ 2180.134163] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2243.017605] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
[ 2260.895995] eth0: no IPv6 routers present
[ 2261.248135] eth0: Media Link Off
[ 2268.790384] bcm43xx: Radio disabled by hardware
[ 2268.925997] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2329.312468] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
[ 2364.631710] bcm43xx: Radio disabled by hardware
[ 2364.811302] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2429.521813] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
[ 2614.675570] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
[ 2640.477056] bcm43xx: Radio disabled by hardware
[ 2640.638126] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2701.025429] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
[ 2709.799237] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 2709.915576] usb 1-6: configuration #1 chosen from 1 choice
[ 2709.919268] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2709.920157] usb-storage: device found at 3
[ 2709.920165] usb-storage: waiting for device to settle before scanning
[ 2714.917491] usb-storage: device scan complete
[ 2715.014193] scsi 4:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2 CCS
[ 2715.017640] sd 4:0:0:0: [sdb] 703282608 512-byte hardware sectors (360081 MB)
[ 2715.018886] sd 4:0:0:0: [sdb] Write Protect is off
[ 2715.018897] sd 4:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 2715.018903] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2715.020263] sd 4:0:0:0: [sdb] 703282608 512-byte hardware sectors (360081 MB)
[ 2715.021391] sd 4:0:0:0: [sdb] Write Protect is off
[ 2715.021402] sd 4:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 2715.021408] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2715.021414] sdb: sdb1
[ 2715.038606] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2715.039653] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2776.011219] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[ 2776.011229] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 2776.146785] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
[ 2776.146796] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 3076.075976] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
[ 3101.516249] bcm43xx: Radio disabled by hardware
[ 3101.652165] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 3165.134416] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
[ 3171.579221] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3176.198840] NETDEV WATCHDOG: eth0: transmit timed out
[ 3176.198853] eth0: Transmit timeout, status 00000004 00000000
[ 3176.574661] eth0: Media Link On 100mbps full-duplex
[ 3182.276267] eth0: no IPv6 routers present
[ 3212.949058] eth0: no IPv6 routers present
[ 3326.665336] bcm43xx: Radio disabled by hardware
[ 3326.929536] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 3397.916589] SoftMAC: Authentication timed out with 00:0f:b5:da:49:fa
localhost xxx # lsusb
Bus 002 Device 002: ID 04fc:0005 Sunplus Technology Co., Ltd
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 003: ID 059b:0370 Iomega Corp.
Bus 001 Device 001: ID 0000:0000
bokoio
Baby Hen
 
Posts: 1
Joined: Mon Feb 25, 2008 21:55


Return to Networking and Wireless

Who is online

Users browsing this forum: No registered users and 2 guests

cron