problems

Installer Issues via Installer -- Not for global upgrades or upgrading individual packages -- ONLY ISSUES WITH INSTALLATION OF THE OS -- Can't get Sabayon installed, than post here, otherwise use correct forums

Moderator: Moderators

Re: problems

Postby SethBv » Thu Aug 30, 2007 16:50

i will try it and let you know
SethBv
Young Hen
 
Posts: 22
Joined: Mon Aug 27, 2007 15:24

Re: problems

Postby SethBv » Thu Aug 30, 2007 17:05

i did that, and same freeze here is a part /etc/X11/xorg.conf

Code: Select all
# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA"
    Driver      "nv" # do not remove vesa
    #Option "RenderAccel" "on"
    Option "XAANoOffscreenPixmaps"
    #Option "BusType" "PCI"
    #Option "ColorTiling" "on"
    #Option "EnablePageFlip" "on"
EndSection


# **********************************************************************
# Screen sections.
# **********************************************************************

here is "dmesg" output
Code: Select all
 0000:00:01.0
[   31.877459]   IO window: b000-bfff
[   31.877461]   MEM window: fa000000-fcffffff
[   31.877463]   PREFETCH window: d0000000-dfffffff
[   31.877464] PCI: Bridge: 0000:00:1c.0
[   31.877466]   IO window: a000-afff
[   31.877469]   MEM window: fda00000-fdafffff
[   31.877472]   PREFETCH window: fd700000-fd7fffff
[   31.877475] PCI: Bridge: 0000:00:1c.4
[   31.877476]   IO window: e000-efff
[   31.877479]   MEM window: fde00000-fdefffff
[   31.877482]   PREFETCH window: fdd00000-fddfffff
[   31.877485] PCI: Bridge: 0000:00:1c.5
[   31.877487]   IO window: d000-dfff
[   31.877490]   MEM window: fdc00000-fdcfffff
[   31.877492]   PREFETCH window: fdb00000-fdbfffff
[   31.877495] PCI: Bridge: 0000:00:1e.0
[   31.877497]   IO window: c000-cfff
[   31.877500]   MEM window: fd900000-fd9fffff
[   31.877502]   PREFETCH window: fd800000-fd8fffff
[   31.877508] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   31.877511] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   31.877520] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   31.877524] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   31.877533] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[   31.877536] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   31.877546] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[   31.877549] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   31.877555] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   31.877574] NET: Registered protocol family 2
[   31.887963] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[   31.888544] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[   31.891265] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   31.891882] TCP: Hash tables configured (established 262144 bind 65536)
[   31.891884] TCP reno registered
[   31.895146] checking if image is initramfs... it is
[   32.118017] Freeing initrd memory: 4090k freed
[   32.119564] audit: initializing netlink socket (disabled)
[   32.119577] audit(1188500332.500:1): initialized
[   32.119625] Total HugeTLB memory allocated, 0
[   32.119697] VFS: Disk quotas dquot_6.5.1
[   32.119706] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   32.119784] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[   32.119787] Registering unionfs 20060916-2203
[   32.119788] unionfs: debugging is not enabled
[   32.119810] Coda Kernel/Venus communications, v5.3.20, [email protected]
[   32.120045] Installing knfsd (copyright (C) 1996 [email protected]).
[   32.120227] NTFS driver 2.1.28 [Flags: R/W].
[   32.120268] QNX4 filesystem 0.2.3 registered.
[   32.120272] fuse init (API version 7.8)
[   32.120340] JFS: nTxBlock = 8192, nTxLock = 65536
[   32.122912] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   32.123067] SGI XFS Quota Management subsystem
[   32.123102] SELinux:  Registering netfilter hooks
[   32.123200] io scheduler noop registered
[   32.123201] io scheduler anticipatory registered
[   32.123203] io scheduler deadline registered
[   32.123214] io scheduler cfq registered (default)
[   32.124978] Boot video device is 0000:01:00.0
[   32.125076] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   32.125086] assign_interrupt_mode Found MSI capability
[   32.125089] Allocate Port Service[0000:00:01.0:pcie00]
[   32.125122] Allocate Port Service[0000:00:01.0:pcie03]
[   32.125165] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   32.125187] assign_interrupt_mode Found MSI capability
[   32.125189] Allocate Port Service[0000:00:1c.0:pcie00]
[   32.125215] Allocate Port Service[0000:00:1c.0:pcie02]
[   32.125241] Allocate Port Service[0000:00:1c.0:pcie03]
[   32.125294] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   32.125317] assign_interrupt_mode Found MSI capability
[   32.125319] Allocate Port Service[0000:00:1c.4:pcie00]
[   32.125345] Allocate Port Service[0000:00:1c.4:pcie02]
[   32.125370] Allocate Port Service[0000:00:1c.4:pcie03]
[   32.125422] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   32.125445] assign_interrupt_mode Found MSI capability
[   32.125446] Allocate Port Service[0000:00:1c.5:pcie00]
[   32.125475] Allocate Port Service[0000:00:1c.5:pcie02]
[   32.125501] Allocate Port Service[0000:00:1c.5:pcie03]
[   32.146182] lp: driver loaded but no devices found
[   32.146234] Real Time Clock Driver v1.12ac
[   32.147180] intel_rng: FWH not detected
[   32.151386] ppdev: user-space parallel port driver
[   32.151388] Linux agpgart interface v0.102 (c) Dave Jones
[   32.151465] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 3072k, total 262144k
[   32.151468] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[   32.151469] vesafb: scrolling: redraw
[   32.151471] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   32.167297] Console: switching to colour frame buffer device 128x48
[   32.182759] fbsplash: console 0 using theme 'sabayon'
[   32.314807] fbsplash: switched splash state to 'on' on console 0
[   32.315112] fb0: VESA VGA frame buffer device
[   32.315285] input: Power Button (FF) as /class/input/input0
[   32.315289] ACPI: Power Button (FF) [PWRF]
[   32.315339] input: Power Button (CM) as /class/input/input1
[   32.315341] ACPI: Power Button (CM) [PWRB]
[   32.315401] ACPI: Fan [FAN] (on)
[   32.315689] ACPI: SSDT 7FEE7C80, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
[   32.315787] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[   32.315796] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[   32.317966] ACPI: Thermal Zone [THRM] (40 C)
[   32.318028] ibm_acpi: ec object not found
[   32.318034] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   32.318588] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   32.318737] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   32.318899] parport_pc 00:09: reported by Plug and Play ACPI
[   32.318950] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   32.402475] lp0: using parport0 (interrupt-driven).
[   32.402478] lp0: console ready
[   32.402630] PCI driver parport_pc lacks driver specific resume support.
[   32.417248] FDC 0 is a post-1991 82077
[   32.418536] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[   32.418762] loop: module loaded
[   32.418763] Compaq SMART2 Driver (v 2.6.0)
[   32.418794] PCI driver cpqarray lacks driver specific resume support.
[   32.418796] HP CISS Driver (v 3.6.14)
[   32.418822] PCI driver cciss lacks driver specific resume support.
[   32.418848] PCI driver DAC960 lacks driver specific resume support.
[   32.418923] v2.3 : Micro Memory(tm) PCI memory board block driver
[   32.418952] PCI driver umem lacks driver specific resume support.
[   32.418954] MM: desc_per_page = 128
[   32.419004] Device driver lo lacks bus and class support for being resumed.
[   32.419048] PCI driver hp100 lacks driver specific resume support.
[   32.419090] input: Macintosh mouse button emulation as /class/input/input2
[   32.419111] Loading iSCSI transport class v2.0-724.
[   32.419186] iscsi: registered transport (tcp)
[   32.419240] PCI driver arcmsr lacks driver specific resume support.
[   32.419275] PCI driver aic7xxx lacks driver specific resume support.
[   32.419315] PCI driver aic79xx lacks driver specific resume support.
[   32.419317] Adaptec aacraid driver (1.1-5[2437]-mh4)
[   32.419348] PCI driver aacraid lacks driver specific resume support.
[   32.419362] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   32.419404] PCI driver aic94xx lacks driver specific resume support.
[   32.419430] PCI driver ips lacks driver specific resume support.
[   32.419474] PCI driver qla1280 lacks driver specific resume support.
[   32.419483] QLogic Fibre Channel HBA Driver
[   32.419515] PCI driver qla2xxx lacks driver specific resume support.
[   32.419542] iscsi: registered transport (qla4xxx)
[   32.419571] PCI driver qla4xxx lacks driver specific resume support.
[   32.419573] QLogic iSCSI HBA Driver
[   32.419574] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[   32.419575] Copyright(c) 2004-2007 Emulex.  All rights reserved.
[   32.419607] PCI driver lpfc lacks driver specific resume support.
[   32.419634] PCI driver dmx3191d lacks driver specific resume support.
[   32.419664] PCI driver sym53c8xx lacks driver specific resume support.
[   32.419697] PCI driver dc395x lacks driver specific resume support.
[   32.419699] DC390: clustering now enabled by default. If you get problems load
[   32.419700]  with "disable_clustering=1" and report to maintainers
[   32.419729] PCI driver tmscsim lacks driver specific resume support.
[   32.419761] PCI driver megaraid_legacy lacks driver specific resume support.
[   32.419764] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[   32.419766] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[   32.419796] PCI driver megaraid lacks driver specific resume support.
[   32.419798] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[   32.419828] PCI driver megaraid_sas lacks driver specific resume support.
[   32.419855] PCI driver atp870u lacks driver specific resume support.
[   32.419857] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[   32.419987] GDT-HA: Found 0 PCI Storage RAID Controllers
[   32.420016] PCI driver inia100 lacks driver specific resume support.
[   32.420017] 3ware Storage Controller device driver for Linux v1.26.02.002.
[   32.420045] PCI driver 3w-xxxx lacks driver specific resume support.
[   32.420046] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[   32.420072] PCI driver 3w-9xxx lacks driver specific resume support.
[   32.420073] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[   32.420104] PCI driver ipr lacks driver specific resume support.
[   32.420105] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[   32.420130] PCI driver hptiop lacks driver specific resume support.
[   32.420132] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[   32.420157] PCI driver stex lacks driver specific resume support.
[   32.420160] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[   32.420189] osst :I: Tape driver with OnStream support version 0.99.4
[   32.420190] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   32.420298] ahci 0000:04:00.0: version 2.2
[   32.420315] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   33.134958] Device driver 0001292000061782 lacks bus and class support for being resumed.
[   33.135003] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0001292000061782]
[   33.421542] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[   33.421546] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[   33.421552] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   33.421625] scsi0 : ahci
[   33.421638] Device driver host0 lacks bus and class support for being resumed.
[   33.421695] ata1: SATA max UDMA/133 cmd 0xffffc20000330100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 17
[   33.724537] ata1: SATA link down (SStatus 0 SControl 300)
[   33.724605] PCI driver sata_svw lacks driver specific resume support.
[   33.724645] ata_piix 0000:00:1f.1: version 2.11
[   33.724657] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   33.724679] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   33.724723] scsi1 : ata_piix
[   33.724735] Device driver host1 lacks bus and class support for being resumed.
[   33.724797] scsi2 : ata_piix
[   33.724805] Device driver host2 lacks bus and class support for being resumed.
[   33.724835] ata2: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fb00 irq 14
[   33.724838] ata3: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fb08 irq 15
[   33.881163] ata2.00: ATA-6: WDC WD1600JB-00GVC0, 08.02D08, max UDMA/100
[   33.881167] ata2.00: 312581808 sectors, multi 16: LBA48
[   33.888316] ata2.00: configured for UDMA/100
[   33.888333] ata3: port disabled. ignoring.
[   33.888367] Device driver target1:0:0 lacks bus and class support for being resumed.
[   33.888452] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
[   33.888574] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   33.888584] sd 1:0:0:0: [sda] Write Protect is off
[   33.888586] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.888602] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.888642] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   33.888651] sd 1:0:0:0: [sda] Write Protect is off
[   33.888653] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.888669] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.888671]  sda: sda1
[   33.899054] sd 1:0:0:0: [sda] Attached SCSI disk
[   33.899131] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   33.899156] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   33.899169] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[   33.899190] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   33.899220] scsi3 : ata_piix
[   33.899231] Device driver host3 lacks bus and class support for being resumed.
[   33.899300] scsi4 : ata_piix
[   33.899309] Device driver host4 lacks bus and class support for being resumed.
[   33.899339] ata4: SATA max UDMA/133 cmd 0x000000000001fa00 ctl 0x000000000001f902 bmdma 0x000000000001f600 irq 19
[   33.899342] ata5: SATA max UDMA/133 cmd 0x000000000001f800 ctl 0x000000000001f702 bmdma 0x000000000001f608 irq 19
[   34.226557] ata4.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133
[   34.226561] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   34.226566] ata4.01: ATAPI: HL-DT-STDVD-RAM GSA-H30N, 1.01, max UDMA/100
[   34.233841] ata4.00: configured for UDMA/133
[   34.390969] ata4.01: configured for UDMA/100
[   34.577896] ata5.00: ATA-7: ST3120813AS, 2AAA, max UDMA/133
[   34.577899] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   34.652824] ata5.00: configured for UDMA/133
[   34.652839] Device driver target3:0:0 lacks bus and class support for being resumed.
[   34.652906] scsi 3:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[   34.653020] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   34.653039] sd 3:0:0:0: [sdb] Write Protect is off
[   34.653043] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   34.653071] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.653101] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   34.653110] sd 3:0:0:0: [sdb] Write Protect is off
[   34.653112] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   34.653127] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.653129]  sdb: sdb1 sdb2 sdb3
[   34.654927] sd 3:0:0:0: [sdb] Attached SCSI disk
[   34.655008] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   34.655026] Device driver target3:0:1 lacks bus and class support for being resumed.
[   34.656761] scsi 3:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H30N 1.01 PQ: 0 ANSI: 5
[   34.860846] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   34.860850] Uniform CD-ROM driver Revision: 3.20
[   34.860909] sr 3:0:1:0: Attached scsi CD-ROM sr0
[   34.860986] sr 3:0:1:0: Attached scsi generic sg2 type 5
[   34.861014] Device driver target4:0:0 lacks bus and class support for being resumed.
[   34.861088] scsi 4:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
[   34.861161] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[   34.861170] sd 4:0:0:0: [sdc] Write Protect is off
[   34.861172] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   34.861187] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.861219] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
[   34.861231] sd 4:0:0:0: [sdc] Write Protect is off
[   34.861233] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   34.861249] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.861251]  sdc: sdc1 sdc2
[   34.875770] sd 4:0:0:0: [sdc] Attached SCSI disk
[   34.875819] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   34.875866] PCI driver sata_promise lacks driver specific resume support.
[   34.875892] PCI driver sata_qstor lacks driver specific resume support.
[   34.875997] PCI driver sata_vsc lacks driver specific resume support.
[   34.876026] PCI driver sata_sis lacks driver specific resume support.
[   34.876052] PCI driver sata_sx4 lacks driver specific resume support.
[   34.876107] PCI driver sata_uli lacks driver specific resume support.
[   34.876137] PCI driver sata_mv lacks driver specific resume support.
[   34.876188] PCI driver pdc_adma lacks driver specific resume support.
[   34.876263] PCI driver pata_artop lacks driver specific resume support.
[   34.876488] PCI driver pata_hpt37x lacks driver specific resume support.
[   34.876516] PCI driver pata_hpt3x2n lacks driver specific resume support.
[   34.876822] PCI driver pata_pdc2027x lacks driver specific resume support.
[   34.877029] PCI driver pata_sl82c105 lacks driver specific resume support.
[   34.877109] I2O subsystem v1.325
[   34.877111] i2o: max drivers = 8
[   34.877193] PCI driver PCI_I2O lacks driver specific resume support.
[   34.877195] I2O Configuration OSM v1.323
[   34.877243] I2O Bus Adapter OSM v1.317
[   34.877265] I2O Block Device OSM v1.325
[   34.877333] I2O SCSI Peripheral OSM v1.316
[   34.877353] I2O ProcFS OSM v1.316
[   34.877374] Fusion MPT base driver 3.04.04
[   34.877375] Copyright (c) 1999-2007 LSI Logic Corporation
[   34.877378] Fusion MPT SPI Host driver 3.04.04
[   34.877410] Fusion MPT FC Host driver 3.04.04
[   34.877444] Fusion MPT SAS Host driver 3.04.04
[   34.877477] Fusion MPT misc device (ioctl) driver 3.04.04
[   34.877501] mptctl: Registered with Fusion MPT base driver
[   34.877503] mptctl: /dev/mptctl @ (major,minor=10,220)
[   34.877505] Fusion MPT LAN driver 3.04.04
[   34.877575] usbcore: registered new interface driver usblp
[   34.877577] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[   34.877578] Initializing USB Mass Storage driver...
[   34.877605] usbcore: registered new interface driver usb-storage
[   34.877606] USB Mass Storage support registered.
[   34.877631] usbcore: registered new interface driver libusual
[   34.877633] USB driver libusual lacks resume support.
[   34.877693] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   34.877695] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   34.877975] serio: i8042 KBD port at 0x60,0x64 irq 1
[   34.877980] serio: i8042 AUX port at 0x60,0x64 irq 12
[   34.877986] parport0: cannot grant exclusive access for device parkbd
[   34.878060] PCI driver pcips2 lacks driver specific resume support.
[   34.878161] mice: PS/2 mouse device common for all mice
[   34.899567] input: AT Translated Set 2 keyboard as /class/input/input3
[   34.956332] md: linear personality registered for level -1
[   34.956335] md: raid0 personality registered for level 0
[   34.956338] md: raid1 personality registered for level 1
[   34.956340] md: raid10 personality registered for level 10
[   34.972923] raid6: int64x1   2250 MB/s
[   34.989920] raid6: int64x2   2738 MB/s
[   35.006903] raid6: int64x4   2582 MB/s
[   35.023906] raid6: int64x8   1734 MB/s
[   35.040891] raid6: sse2x1    3656 MB/s
[   35.057880] raid6: sse2x2    4351 MB/s
[   35.074865] raid6: sse2x4    7156 MB/s
[   35.074866] raid6: using algorithm sse2x4 (7156 MB/s)
[   35.074868] md: raid6 personality registered for level 6
[   35.074870] md: raid5 personality registered for level 5
[   35.074871] md: raid4 personality registered for level 4
[   35.074873] raid5: automatically using best checksumming function: generic_sse
[   35.079856]    generic_sse:  8824.000 MB/sec
[   35.079857] raid5: using function: generic_sse (8824.000 MB/sec)
[   35.079859] md: multipath personality registered for level -4
[   35.079860] md: faulty personality registered for level -5
[   35.079904] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
[   35.080025] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   35.080051] usbcore: registered new interface driver hiddev
[   35.080053] USB driver hiddev lacks resume support.
[   35.080074] usbcore: registered new interface driver usbhid
[   35.080076] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   35.080096] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[   35.080132] ALSA device list:
[   35.080133]   No soundcards found.
[   35.080182] TCP bic registered
[   35.080188] NET: Registered protocol family 1
[   35.080191] NET: Registered protocol family 17
[   35.082025] Suspend v2.2.10
[   35.082400] Suspend2 Checksumming support registered.
[   35.082429] Suspend2 Userspace Storage Manager support registered.
[   35.082451] Suspend2 Basic User Interface support registered.
[   35.082474] Suspend2 Compressor support registered.
[   35.082496] Suspend2 Block I/O support registered.
[   35.082517] Suspend2 Swap Allocator support registered.
[   35.082539] Suspend2 File Allocator support registered.
[   35.082543] Suspend2 Userspace UI support registered.
[   35.082669] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   35.082675] Freeing unused kernel memory: 396k freed
[   35.492089] ata1: soft resetting port
[   35.492098] ata1: SATA link down (SStatus 0 SControl 300)
[   35.492106] ata1: EH complete
[   35.590270] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[   35.591040] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   35.591044] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   35.591137] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   35.591159] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   35.591166] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[   35.595037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   35.595142] Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
[   35.595149] usb usb1: configuration #1 chosen from 1 choice
[   35.595181] hub 1-0:1.0: USB hub found
[   35.595185] hub 1-0:1.0: 8 ports detected
[   35.696151] Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
[   35.715232] USB Universal Host Controller Interface driver v3.0
[   35.715297] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[   35.715305] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   35.715307] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   35.715347] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   35.715368] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[   35.715466] Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
[   35.715473] usb usb2: configuration #1 chosen from 1 choice
[   35.715507] hub 2-0:1.0: USB hub found
[   35.715511] hub 2-0:1.0: 2 ports detected
[   35.817149] Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
[   35.817219] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   35.817226] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   35.817229] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   35.817276] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   35.817297] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[   35.817412] Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
[   35.817419] usb usb3: configuration #1 chosen from 1 choice
[   35.817451] hub 3-0:1.0: USB hub found
[   35.817454] hub 3-0:1.0: 2 ports detected
[   35.919171] Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
[   35.919238] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   35.919245] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   35.919248] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   35.919296] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   35.919319] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[   35.919434] Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
[   35.919440] usb usb4: configuration #1 chosen from 1 choice
[   35.919470] hub 4-0:1.0: USB hub found
[   35.919474] hub 4-0:1.0: 2 ports detected
[   36.021196] Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
[   36.021262] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   36.021269] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   36.021272] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   36.021321] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   36.021344] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[   36.021457] Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.
[   36.021463] usb usb5: configuration #1 chosen from 1 choice
[   36.021495] hub 5-0:1.0: USB hub found
[   36.021499] hub 5-0:1.0: 2 ports detected
[   36.123216] Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.
[   36.170759] sl811: driver sl811-hcd, 19 May 2005
[   36.248135] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[   36.248137] Copyright (c) 1999-2006 Intel Corporation.
[   36.263128] usb 4-1: new low speed USB device using uhci_hcd and address 2
[   36.431278] Device driver usbdev4.2_ep00 lacks bus and class support for being resumed.
[   36.431288] usb 4-1: configuration #1 chosen from 1 choice
[   36.456360] input: A4Tech Wireless Battery Free Optical Mouse as /class/input/input4
[   36.456475] input: USB HID v1.10 Mouse [A4Tech Wireless Battery Free Optical Mouse] on usb-0000:00:1d.2-1
[   36.456535] Device driver usbdev4.2_ep81 lacks bus and class support for being resumed.
[   36.662892] usb 4-2: new full speed USB device using uhci_hcd and address 3
[   36.834104] Device driver usbdev4.3_ep00 lacks bus and class support for being resumed.
[   36.834123] usb 4-2: configuration #1 chosen from 1 choice
[   36.842043] Device driver usbdev4.3_ep81 lacks bus and class support for being resumed.
[   36.842089] Device driver usbdev4.3_ep02 lacks bus and class support for being resumed.
[   36.847042] Device driver usbdev4.3_ep83 lacks bus and class support for being resumed.
[   36.847091] Device driver usbdev4.3_ep04 lacks bus and class support for being resumed.
[   36.849051] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x00B2
[   36.855037] hiddev1: USB HID v1.00 Device [Lexmark  3300 Series] on usb-0000:00:1d.2-2
[   36.855072] Device driver usbdev4.3_ep89 lacks bus and class support for being resumed.
[   37.611852] No storage allocator is currently active. Rechecking whether we can use one.
[   37.638909] Suspend2: SwapAllocator: Signature found.
[   37.638912] Suspend2: Resuming enabled.
[   37.642724] Suspend2: Failed to initialise the lzf compression transform.
[   37.642877] Suspend2: Normal swapspace found.
[   37.647704] EXT3-fs: INFO: recovery required on readonly filesystem.
[   37.647706] EXT3-fs: write access will be enabled during recovery.
[   39.127092] kjournald starting.  Commit interval 5 seconds
[   39.127104] EXT3-fs: dm-0: orphan cleanup on readonly fs
[   39.127111] ext3_orphan_cleanup: deleting unreferenced inode 14319714
[   39.127133] ext3_orphan_cleanup: deleting unreferenced inode 14319701
[   39.127141] EXT3-fs: dm-0: 2 orphan inodes deleted
[   39.127143] EXT3-fs: recovery complete.
[   39.144703] EXT3-fs: mounted filesystem with ordered data mode.
[   41.380543] input: PC Speaker as /class/input/input5
[   41.491254] r8169 Gigabit Ethernet driver 2.2LK loaded
[   41.491273] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   41.491293] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   41.491467] Device driver eth0 lacks bus and class support for being resumed.
[   41.491483] eth0: RTL8168b/8111b at 0xffffc20000336000, 00:01:29:d7:6d:38, IRQ 16
[   41.498871] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[   41.498898] Device driver i2c-0 lacks bus and class support for being resumed.
[   41.499237] iTCO_vendor_support: vendor-support=0
[   41.499743] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   41.501989] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   41.502020] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   41.502125] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   41.502885] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   41.555465] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[   41.845667] nvidia: module license 'NVIDIA' taints kernel.
[   42.099199] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   42.099205] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   42.099274] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.09  Sat May 26 00:43:07 PDT 2007
[   44.438089] EXT3 FS on dm-0, internal journal
[   44.616623] vboxdrv: Trying to deactivate NMI watchdog permanently...
[   44.616626] vboxdrv: Successfully done.
[   45.092022] kjournald starting.  Commit interval 5 seconds
[   45.092354] EXT3 FS on sdc1, internal journal
[   45.092358] EXT3-fs: mounted filesystem with ordered data mode.
[   45.164202] Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
[   58.781661] fbsplash: console 1 using theme 'sabayon'
[   58.785671] fbsplash: switched splash state to 'on' on console 1
[   58.791032] fbsplash: console 2 using theme 'sabayon'
[   58.794854] fbsplash: switched splash state to 'on' on console 2
[   58.802551] fbsplash: console 3 using theme 'sabayon'
[   58.806396] fbsplash: switched splash state to 'on' on console 3
[   58.812240] fbsplash: console 4 using theme 'sabayon'
[   58.816072] fbsplash: switched splash state to 'on' on console 4
[   58.822335] fbsplash: console 5 using theme 'sabayon'
[   58.826151] fbsplash: switched splash state to 'on' on console 5
[   58.831623] fbsplash: console 11 using theme 'sabayon'
[   58.835054] fbsplash: switched splash state to 'on' on console 11
[   66.450898] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[   67.308459] r8169: eth0: link up
[   67.308467] r8169: eth0: link up
[   67.453032] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.

and here is the output of "lspci"
Code: Select all
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub (rev c0)
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port (rev c0)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)

question is: why does it run flawlesly on the LiveDVD and after u install it problems start to appear?
SethBv
Young Hen
 
Posts: 22
Joined: Mon Aug 27, 2007 15:24

Re: problems

Postby DontPanic » Thu Aug 30, 2007 17:54

OK, you can probably restore you xorg.conf back to nvidia. That seems to not be the problem.

When your system 'freezes', can you hit Ctrl-Alt-F1, and get to a console ? (note, if this works, Ctrl-Alt-F7 would get you back to the frozen graphical interface). Or is your system locked up hard?

Also, I'm seeing kdm errors in the log file you posted referring to memory corruption. If you haven't already done so, please run memtest to confirm your memory is sound.

Next, I have a small homework assignment for you. Do a search through the Sabayon-Linux Forums on 'cheat codes'. Scattered throughout the forums are various tips for adding a 'cheat code' when you boot up to disable, enable, set or configure something. Try a few of the ones that look most promising, and see if they help.

Get back to me on how these go.
Gigabyte GA-P35-DS3L - Intel(R) Core(TM)2 Duo CPU E6750@ 2.66GHz
nVidia GeForce 7600 GS
2 GB RAM
DontPanic
Old Dear Hen
 
Posts: 742
Joined: Mon Jul 09, 2007 20:29
Location: Mobile, AL, USA

Re: problems

Postby SethBv » Thu Aug 30, 2007 18:00

i may try to ssh from another machine but i disabled the ssh-server on installation and i have no idea how to enable it cuzz i really have no experience with gentoo
SethBv
Young Hen
 
Posts: 22
Joined: Mon Aug 27, 2007 15:24

Re: problems

Postby SethBv » Thu Aug 30, 2007 18:06

nevermind with the ssh server, its the plain old /etc/init.d/sshd start command :D (i am on sabayon right now, on fluxbox. Not because it doesn't freeze, cuzz it does..but not that often lol)
SethBv
Young Hen
 
Posts: 22
Joined: Mon Aug 27, 2007 15:24

Re: problems

Postby SethBv » Thu Aug 30, 2007 19:59

the system is locked up for good, i tryed to login thru ssh from another computer and no response, i tryed Ctrl+Alt+F1 and nothing, i did a memtest too but when i saw one hour and thirty minutes passed i stopped it, it was pass 3 and errors 0, so..my guess is that there aren't any problems with compiz/nvidia drivers and there are some problems with the kernel or something
Last edited by SethBv on Thu Aug 30, 2007 22:23, edited 1 time in total.
SethBv
Young Hen
 
Posts: 22
Joined: Mon Aug 27, 2007 15:24

Re: problems

Postby DontPanic » Thu Aug 30, 2007 20:58

Try a couple of the boot cheat codes. Here are some links:

http://wiki.sabayonlinux.org/index.php?title=Tips#Cheat_Codes
http://wiki.sabayonlinux.org/index.php?title=Sabayon_Linux

I see several people recommend the 'noapic' cheat code.
Another interesting cheat code would be 'console'. This takes you to the boring non-graphical console login. Login and run 'top' for a while, and see if you lock up just on console mode. This way is also handy if you have to do some manual emerge's to fix something.
'noaccelmanager' might be another interesting test.
Gigabyte GA-P35-DS3L - Intel(R) Core(TM)2 Duo CPU E6750@ 2.66GHz
nVidia GeForce 7600 GS
2 GB RAM
DontPanic
Old Dear Hen
 
Posts: 742
Joined: Mon Jul 09, 2007 20:29
Location: Mobile, AL, USA

Previous

Return to Installer Issues - Calamares **Not for Package Manager Stuff**

Who is online

Users browsing this forum: No registered users and 1 guest