Codec scheda audio [Risolto]

Tutto ciò che è pertinente a Sabayon Linux, indipendentemente dall'architettura e dall'ambiente grafico

Moderator: Moderators

Codec scheda audio [Risolto]

Postby JamesRoot666 » Mon Jun 13, 2011 10:17

Salve manca un ultimo passo per sistemare al completo il mio portatile con Sabayon sopra :D ovvero vorrei sapere quale codec tra questi scritti in questa lista devo utilizzare per la mia scheda audio :) :) il mio portatile è un Toshiba Satellite Pro L40 con scheda audio Intel HD Audio (ICH8) (almeno cosi me l'ha identificata il sistema :mrgreen: :mrgreen: )

Code: Select all
Module snd-hda-intel
     --------------------
   
       Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
         ATI SB450, SB600, RS600,
         VIA VT8251/VT8237A,
         SIS966, ULI M5461
   
       model   - force the model name
       position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
       single_cmd  - Use single immediate commands to communicate with
         codecs (for debugging only)
       enable_msi   - Enable Message Signaled Interrupt (MSI) (default = off)
   
       This module supports one card and autoprobe.
   
       Each codec may have a model table for different configurations.
       If your machine isn't listed there, the default (usually minimal)
       configuration is set up.  You can pass "model=<name>" option to
       specify a certain model in such a case.  There are different
       models depending on the codec chip.
   
        Model name   Description
        ----------    -----------
      ALC880
        3stack   3-jack in back and a headphone out
        3stack-digout   3-jack in back, a HP out and a SPDIF out
        5stack   5-jack in back, 2-jack in front
        5stack-digout   5-jack in back, 2-jack in front, a SPDIF out
        6stack   6-jack in back, 2-jack in front
        6stack-digout   6-jack with a SPDIF out
        w810      3-jack
        z71v      3-jack (HP shared SPDIF)
        asus      3-jack (ASUS Mobo)
        asus-w1v   ASUS W1V
        asus-dig   ASUS with SPDIF out
        asus-dig2   ASUS with SPDIF out (using GPIO2)
        uniwill   3-jack
        fujitsu   Fujitsu Laptops (Pi1536)
        F1734      2-jack
        lg      LG laptop (m1 express dual)
        lg-lw      LG LW20/LW25 laptop
        tcl      TCL S700
        clevo      Clevo laptops (m520G, m665n)
        test      for testing/debugging purpose, almost all controls can be
            adjusted.  Appearing only when compiled with
            $CONFIG_SND_DEBUG=y
        auto      auto-config reading BIOS (default)
   
      ALC260
        hp      HP machines
        hp-3013   HP machines (3013-variant)
        fujitsu   Fujitsu S7020
        acer      Acer TravelMate
        basic      fixed pin assignment (old default model)
        auto      auto-config reading BIOS (default)
   
      ALC262
        fujitsu   Fujitsu Laptop
        hp-bpc   HP xw4400/6400/8400/9400 laptops
        hp-bpc-d7000   HP BPC D7000
        benq      Benq ED8
        hippo      Hippo (ATI) with jack detection, Sony UX-90s
        hippo_1   Hippo (Benq) with jack detection
        basic      fixed pin assignment w/o SPDIF
        auto      auto-config reading BIOS (default)
   
      ALC882/885
        3stack-dig   3-jack with SPDIF I/O
        6stack-dig   6-jack digital with SPDIF I/O
        arima      Arima W820Di1
        macpro   MacPro support
        w2jc      ASUS W2JC
        auto      auto-config reading BIOS (default)
   
      ALC883/888
        3stack-dig   3-jack with SPDIF I/O
        6stack-dig   6-jack digital with SPDIF I/O
        3stack-6ch    3-jack 6-channel
        3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
        6stack-dig-demo  6-jack digital for Intel demo board
        acer      Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
        medion   Medion Laptops
        targa-dig   Targa/MSI
        targa-2ch-dig   Targs/MSI with 2-channel
        laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
        auto      auto-config reading BIOS (default)
   
      ALC861/660
        3stack   3-jack
        3stack-dig   3-jack with SPDIF I/O
        6stack-dig   6-jack with SPDIF I/O
        3stack-660   3-jack (for ALC660)
        uniwill-m31   Uniwill M31 laptop
        toshiba   Toshiba laptop support
        asus      Asus laptop support
        asus-laptop   ASUS F2/F3 laptops
        auto      auto-config reading BIOS (default)
   
      ALC861VD/660VD
        3stack   3-jack
        3stack-dig   3-jack with SPDIF OUT
        6stack-dig   6-jack with SPDIF OUT
        3stack-660   3-jack (for ALC660VD)
        lenovo   Lenovo 3000 C200
        auto      auto-config reading BIOS (default)
   
      CMI9880
        minimal   3-jack in back
        min_fp   3-jack in back, 2-jack in front
        full      6-jack in back, 2-jack in front
        full_dig   6-jack in back, 2-jack in front, SPDIF I/O
        allout   5-jack in back, 2-jack in front, SPDIF out
        auto      auto-config reading BIOS (default)
   
      AD1981
        basic      3-jack (default)
        hp      HP nx6320
        thinkpad   Lenovo Thinkpad T60/X60/Z60
        toshiba   Toshiba U205
   
      AD1986A
        6stack   6-jack, separate surrounds (default)
        3stack   3-stack, shared surrounds
        laptop   2-channel only (FSC V2060, Samsung M50)
        laptop-eapd   2-channel with EAPD (Samsung R65, ASUS A6J)
        ultra      2-channel with EAPD (Samsung Ultra tablet PC)
   
      AD1988
        6stack   6-jack
        6stack-dig   ditto with SPDIF
        3stack   3-jack
        3stack-dig   ditto with SPDIF
        laptop   3-jack with hp-jack automute
        laptop-dig   ditto with SPDIF
        auto      auto-config reading BIOS (default)
     
      Conexant 5045
        laptop   Laptop config
        test      for testing/debugging purpose, almost all controls
            can be adjusted.  Appearing only when compiled with
            $CONFIG_SND_DEBUG=y
   
      Conexant 5047
        laptop   Basic Laptop config
        laptop-hp   Laptop config for some HP models (subdevice 30A5)
        laptop-eapd   Laptop config with EAPD support
        test      for testing/debugging purpose, almost all controls
            can be adjusted.  Appearing only when compiled with
            $CONFIG_SND_DEBUG=y
   
      STAC9200/9205/9254
        ref      Reference board
   
      STAC9220/9221
        ref      Reference board
        3stack   D945 3stack
        5stack   D945 5stack + SPDIF
        macmini   Intel Mac Mini
        macbook   Intel Mac Book
        macbook-pro-v1 Intel Mac Book Pro 1st generation
        macbook-pro   Intel Mac Book Pro 2nd generation
        imac-intel   Intel iMac
   
      STAC9202/9250/9251
        ref      Reference board, base config
        m2-2      Some Gateway MX series laptops
        m6      Some Gateway NX series laptops
        pa6      Gateway NX860 series
   
      STAC9227/9228/9229/927x
        ref      Reference board
        3stack   D965 3stack
        5stack   D965 5stack + SPDIF
   
      STAC9872
        vaio      Setup for VAIO FE550G/SZ110
        vaio-ar Setup for VAIO AR
   
       The model name "genric" is treated as a special case.  When this
       model is given, the driver uses the generic codec parser without
       "codec-patch".  It's sometimes good for testing and debugging.
   
       If the default configuration doesn't work and one of the above
       matches with your device, report it together with the PCI
       subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
       ML (see the section "Links and Addresses").
   
       Note 2: If you get click noises on output, try the module option
          position_fix=1 or 2.  position_fix=1 will use the SD_LPIB
          register value without FIFO size correction as the current
          DMA pointer.  position_fix=2 will make the driver to use
          the position buffer instead of reading SD_LPIB register.
          (Usually SD_LPLIB register is more accurate than the
          position buffer.)
Last edited by JamesRoot666 on Tue Jun 14, 2011 10:15, edited 1 time in total.
JamesRoot666
Simple Hen
 
Posts: 76
Joined: Sat May 21, 2011 9:33

Re: Codec scheda audio

Postby micia » Mon Jun 13, 2011 17:03

Salve, qual è il problema, di preciso?
Non ti si sente l'audio, o l'audio è molto basso?
micia
Sagely Hen
 
Posts: 2718
Joined: Wed Nov 26, 2008 16:41

Re: Codec scheda audio

Postby JamesRoot666 » Mon Jun 13, 2011 17:57

non si sente l'audio :mrgreen:
JamesRoot666
Simple Hen
 
Posts: 76
Joined: Sat May 21, 2011 9:33

Re: Codec scheda audio

Postby micia » Mon Jun 13, 2011 18:01

allora anzitutto prova a eseguire questo comando da terminale:
Code: Select all
alsamixer

ora premi F6, dovrebbe esserci una voce con la tua scheda audio, selezionala.
Noterai che ci sono un sacco di volumi, controlla che siano tutti a un livello accettabile, in particolare, se presenti, i canali Master, Speaker e PCM.
micia
Sagely Hen
 
Posts: 2718
Joined: Wed Nov 26, 2008 16:41

Re: Codec scheda audio

Postby JamesRoot666 » Mon Jun 13, 2011 18:31

ho selezionato la mia scheda ma degli speaker non mi presenta il volume anzi alla voce Item me li indica tutti e 2 off cosa faccio??
JamesRoot666
Simple Hen
 
Posts: 76
Joined: Sat May 21, 2011 9:33

Re: Codec scheda audio

Postby micia » Mon Jun 13, 2011 18:35

che schede ti compaiono? Spesso nella lista capita anche l'HDMI, che non ti interessa.
Hai per caso la possibilità di fare un'istantanea di quella finestra?
micia
Sagely Hen
 
Posts: 2718
Joined: Wed Nov 26, 2008 16:41

Re: Codec scheda audio

Postby JamesRoot666 » Mon Jun 13, 2011 18:41

allora come scheda che posso selezionare mi da unicamente l'HDA Intel
JamesRoot666
Simple Hen
 
Posts: 76
Joined: Sat May 21, 2011 9:33

Re: Codec scheda audio

Postby micia » Mon Jun 13, 2011 18:45

ho una HDA intel pure io, però su alsamixer non mi compare nessuna voce "Item" per quello volevo sapere che cosa ci fosse di preciso su quella finestra.
micia
Sagely Hen
 
Posts: 2718
Joined: Wed Nov 26, 2008 16:41

Re: Codec scheda audio [Risolto]

Postby JamesRoot666 » Tue Jun 14, 2011 10:16

Ho risolto mi sono letto il manuale dell'alsamixer e c'era scritto che per attivare un volume bastava premere il tasto m XD nulla di più semplice :alien: :mrgreen: :mrgreen: :mrgreen: grazie mille lo stesso
JamesRoot666
Simple Hen
 
Posts: 76
Joined: Sat May 21, 2011 9:33


Return to Sabayon Linux Discussioni Generali

Who is online

Users browsing this forum: No registered users and 1 guest