problema con la cpu

Tutto ciò che è pertinente a Sabayon Linux, indipendentemente dall'architettura e dall'ambiente grafico

Moderator: Moderators

problema con la cpu

Postby Abacus » Sat Dec 02, 2006 17:39

ho come l'impressione che non mi legga correttamente la cpu, nel senso che credo che usi dei driver generici o qualche cosa di non aposito.
La cpu in questione è un AMD Turion 64 ml-34 a 1.8 ghz ed ho installato sabazon 64 3.2

dmesg restituisce questo

[ 0.000000] Bootdata ok (command line is root=/dev/ram0 ramdisk=8192 real_root=/dev/hda1 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1)
[ 0.000000] Linux version 2.6.18-gentoo-r4 ([email protected]) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #1 SMP Mon Nov 20 16:49:16 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fea0000 (usable)
[ 0.000000] BIOS-e820: 000000003fea0000 - 000000003feae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feae000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6db0
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000003fea81ad
[ 0.000000] ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x000000003feade20
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003feade94
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003feadf6a
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000003feadfc4
[ 0.000000] ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fea0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fea0000
[ 0.000000] On node 0 totalpages: 255767
[ 0.000000] DMA zone: 1594 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 254173 pages, LIFO batch:31
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Built 1 zonelists. Total pages: 255767
[ 0.000000] Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/hda1 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 0.000000] time.c: Detected 1800.100 MHz processor.
[ 15.511488] Console: colour dummy device 80x25
[ 15.512690] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 15.513590] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.513745] Checking aperture...
[ 15.513749] CPU 0: aperture @ 81fe000000 size 32 MB
[ 15.513751] Aperture too small (32 MB)
[ 15.525944] No AGP bridge found
[ 15.541686] Memory: 1013648k/1047168k available (5700k kernel code, 33116k reserved, 2652k data, 284k init)
[ 15.601268] Calibrating delay using timer specific routine.. 3602.36 BogoMIPS (lpj=1801184)
[ 15.601339] Security Framework v1.0.0 initialized
[ 15.601346] SELinux: Initializing.
[ 15.601372] SELinux: Starting in permissive mode
[ 15.601379] selinux_register_security: Registering secondary module capability
[ 15.601381] Capability LSM initialized as secondary
[ 15.601411] Mount-cache hash table entries: 256
[ 15.601614] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.601617] CPU: L2 Cache: 1024K (64 bytes/line)
[ 15.601621] CPU 0/0 -> Node 0
[ 15.601638] SMP alternatives: switching to UP code
[ 15.602254] Freeing SMP alternatives: 52k freed
[ 15.602290] ACPI: Core revision 20060707
[ 15.621009] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 15.631009] Using local APIC timer interrupts.
[ 15.686480] result 12500701
[ 15.686483] Detected 12.500 MHz APIC timer.
[ 15.687167] Brought up 1 CPUs
[ 15.687203] testing NMI watchdog ... OK.
[ 15.697274] migration_cost=0
[ 15.697399] checking if image is initramfs... it is
[ 16.045247] Freeing initrd memory: 7736k freed
[ 16.053794] NET: Registered protocol family 16
[ 16.054019] ACPI: ACPI Dock Station Driver
[ 16.054026] ACPI: bus type pci registered
[ 16.054032] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 16.054037] PCI: Not using MMCONFIG.
[ 16.054045] PCI: Using configuration type 1
[ 16.059021] ACPI: Interpreter enabled
[ 16.059024] ACPI: Using IOAPIC for interrupt routing
[ 16.059562] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.059566] PCI: Probing PCI hardware (bus 00)
[ 16.064584] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[ 16.064993] Boot video device is 0000:01:00.0
[ 16.065880] PCI: Transparent bridge - 0000:00:14.4
[ 16.065960] PCI: Bus #07 (-#0Cool is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[ 16.065963] Please report the result to linux-kernel to fix this permanently
[ 16.066000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.070403] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 16.070674] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 16.070929] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 16.071183] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 16.071438] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 16.071700] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 16.071956] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 16.072215] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 16.072806] ACPI: Embedded Controller [EC0] (gpe 3) interrupt mode.
[ 16.106773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 16.107001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 16.107312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 16.107761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 16.108434] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.108444] pnp: PnP ACPI init
[ 16.118123] pnp: PnP ACPI: found 11 devices
[ 16.118325] SCSI subsystem initialized
[ 16.118386] usbcore: registered new driver usbfs
[ 16.118425] usbcore: registered new driver hub
[ 16.118466] PCI: Using ACPI for IRQ routing
[ 16.118470] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.118478] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 16.118484] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 16.118487] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 16.118491] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 16.118632] PCI-DMA: Disabling IOMMU.
[ 16.119085] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 16.119089] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[ 16.119092] pnp: 00:08: ioport range 0x500-0x51f has been reserved
[ 16.119096] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 16.119127] PCI: Bridge: 0000:00:02.0
[ 16.119130] IO window: 9000-9fff
[ 16.119134] MEM window: c0100000-c01fffff
[ 16.119137] PREFETCH window: c8000000-cfffffff
[ 16.119140] PCI: Bridge: 0000:00:06.0
[ 16.119142] IO window: disabled.
[ 16.119145] MEM window: disabled.
[ 16.119147] PREFETCH window: disabled.
[ 16.119150] PCI: Bridge: 0000:00:07.0
[ 16.119151] IO window: disabled.
[ 16.119154] MEM window: disabled.
[ 16.119156] PREFETCH window: disabled.
[ 16.119168] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 16.119170] IO window: 0000a400-0000a4ff
[ 16.119176] IO window: 0000a800-0000a8ff
[ 16.119183] PREFETCH window: 50000000-51ffffff
[ 16.119189] MEM window: 54000000-55ffffff
[ 16.119195] PCI: Bridge: 0000:00:14.4
[ 16.119199] IO window: a000-afff
[ 16.119206] MEM window: c0200000-c02fffff
[ 16.119212] PREFETCH window: 50000000-52ffffff
[ 16.119225] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.119233] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 16.119240] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 16.119267] GSI 16 sharing vector 0xB1 and IRQ 16
[ 16.119270] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 177
[ 16.119348] NET: Registered protocol family 2
[ 16.128518] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 16.128936] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 16.131120] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 16.132215] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.132218] TCP reno registered
[ 16.135668] audit: initializing netlink socket (disabled)
[ 16.135681] audit(1164973654.557:1): initialized
[ 16.135739] Total HugeTLB memory allocated, 0
[ 16.135861] VFS: Disk quotas dquot_6.5.1
[ 16.135887] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 16.135984] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 16.136003] Coda Kernel/Venus communications, v6.0.0, [email protected]
[ 16.136255] Installing knfsd (copyright (C) 1996 [email protected]).
[ 16.136671] NTFS driver 2.1.27 [Flags: R/W].
[ 16.136723] QNX4 filesystem 0.2.3 registered.
[ 16.136726] fuse init (API version 7.7)
[ 16.136814] JFS: nTxBlock = 7980, nTxLock = 63840
[ 16.143846] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 16.144049] SGI XFS Quota Management subsystem
[ 16.144100] SELinux: Registering netfilter hooks
[ 16.150470] Initializing Cryptographic API
[ 16.150476] io scheduler noop registered
[ 16.150486] io scheduler anticipatory registered (default)
[ 16.150496] io scheduler deadline registered
[ 16.150519] io scheduler cfq registered
[ 16.577310] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.577315] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[ 16.577336] assign_interrupt_mode Found MSI capability
[ 16.577388] Allocate Port Service[0000:00:02.0:pcie00]
[ 16.577436] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 16.577440] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[ 16.577459] assign_interrupt_mode Found MSI capability
[ 16.577483] Allocate Port Service[0000:00:06.0:pcie00]
[ 16.577521] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 16.577524] pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS
[ 16.577544] assign_interrupt_mode Found MSI capability
[ 16.577568] Allocate Port Service[0000:00:07.0:pcie00]
[ 16.603661] lp: driver loaded but no devices found
[ 16.603739] Real Time Clock Driver v1.12ac
[ 16.607840] ppdev: user-space parallel port driver
[ 16.607844] Linux agpgart interface v0.101 (c) Dave Jones
[ 16.607962] vesafb: framebuffer at 0xc8000000, mapped to 0xffffc20000600000, using 3072k, total 16384k
[ 16.607966] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 16.607969] vesafb: scrolling: redraw
[ 16.607972] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 16.617789] Console: switching to colour frame buffer device 128x48
[ 16.628101] fbsplash: console 0 using theme 'sabayon'
[ 16.887263] fbsplash: switched splash state to 'on' on console 0
[ 16.887616] fb0: VESA VGA frame buffer device
[ 16.892914] ACPI: AC Adapter [ADP1] (off-line)
[ 17.077661] ACPI: Battery Slot [BAT0] (battery present)
[ 17.077680] ACPI: Power Button (FF) [PWRF]
[ 17.077690] ACPI: Lid Switch [LID0]
[ 17.077698] ACPI: Sleep Button (CM) [SLPB]
[ 17.078112] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.078470] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.078485] Using specific hotkey driver
[ 17.078546] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 17.136923] ACPI: Thermal Zone [TZS0] (59 C)
[ 17.187402] ACPI: Thermal Zone [TZS1] (34 C)
[ 17.238740] ACPI: Thermal Zone [TZSV] (40 C)
[ 17.238759] ibm_acpi: ec object not found
[ 17.238768] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 17.239083] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 17.239458] GSI 17 sharing vector 0xD9 and IRQ 17
[ 17.239462] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 217
[ 17.239752] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 17.239936] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 17.239991] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 17.240005] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 17.240019] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 17.240031] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 17.240045] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.244664] parkbd: no such parport
[ 17.244792] mice: PS/2 mouse device common for all mice
[ 17.244795] ts: Compaq touchscreen protocol output
[ 17.849235] input: AT Translated Set 2 keyboard as /class/input/input0
[ 18.793751] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 18.826050] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[ 19.398996] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 19.431296] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 19.433615] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 20.250320] floppy0: no floppy controllers found
[ 20.250866] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 20.251138] loop: loaded (max 8 devices)
[ 20.251141] Compaq SMART2 Driver (v 2.6.0)
[ 20.251171] HP CISS Driver (v 3.6.10)
[ 20.251294] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 20.251324] MM: desc_per_page = 128
[ 20.251525] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.251529] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.251585] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 20.251603] GSI 18 sharing vector 0xE1 and IRQ 18
[ 20.251607] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 225
[ 20.251618] ATIIXP: chipset revision 0
[ 20.251620] ATIIXP: not 100% native mode: will probe irqs later
[ 20.251629] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[ 20.251644] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[ 20.251653] Probing IDE interface ide0...
[ 20.515300] hda: ST9100822A, ATA DISK drive
[ 21.126180] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.126228] Probing IDE interface ide1...
[ 21.797097] hdc: MATSHITAUJ-845D, ATAPI CD/DVD-ROM drive
[ 22.102442] ide1 at 0x170-0x177,0x376 on irq 15
[ 22.103449] hda: max request size: 512KiB
[ 22.103912] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[ 22.104060] hda: cache flushes supported
[ 22.104097] hda: hda1 hda2 hda3 < hda5 hda6 > hda4
[ 22.177066] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 22.177072] Uniform CD-ROM driver Revision: 3.20
[ 22.180791] Adaptec aacraid driver (1.1-5[2409]-mh2)
[ 22.180939] QLogic Fibre Channel HBA Driver
[ 22.180977] Emulex LightPulse Fibre Channel SCSI driver 8.1.9
[ 22.180979] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 22.181158] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 22.181162] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
[ 22.181193] megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
[ 22.181258] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 22.181368] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 22.181421] 3ware Storage Controller device driver for Linux v1.26.02.001.
[ 22.181450] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[ 22.181484] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[ 22.181543] libata version 2.00 loaded.
[ 22.181992] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 22.182024] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[ 22.182061] osst :I: Tape driver with OnStream support version 0.99.4
[ 22.182063] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 22.182172] I2O subsystem v1.325
[ 22.182174] i2o: max drivers = 8
[ 22.182265] I2O Configuration OSM v1.323
[ 22.182322] I2O Bus Adapter OSM v1.317
[ 22.182349] I2O Block Device OSM v1.325
[ 22.182420] I2O SCSI Peripheral OSM v1.316
[ 22.182450] I2O ProcFS OSM v1.316
[ 22.182478] Fusion MPT base driver 3.04.01
[ 22.182480] Copyright (c) 1999-2005 LSI Logic Corporation
[ 22.182485] Fusion MPT SPI Host driver 3.04.01
[ 22.182522] Fusion MPT FC Host driver 3.04.01
[ 22.182558] Fusion MPT SAS Host driver 3.04.01
[ 22.182601] Fusion MPT misc device (ioctl) driver 3.04.01
[ 22.182630] mptctl: Registered with Fusion MPT base driver
[ 22.182633] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 22.182635] Fusion MPT LAN driver 3.04.01
[ 22.182654] ieee1394: Initialized config rom entry `ip1394'
[ 22.182758] GSI 19 sharing vector 0xE9 and IRQ 19
[ 22.182762] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 233
[ 22.233073] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 22.233132] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 22.233134] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 22.233180] usbmon: debugfs is not available
[ 22.233209] usbcore: registered new driver usblp
[ 22.233212] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 22.233215] Initializing USB Mass Storage driver...
[ 22.233240] usbcore: registered new driver usb-storage
[ 22.233242] USB Mass Storage support registered.
[ 22.233267] usbcore: registered new driver libusual
[ 22.233297] usbcore: registered new driver hiddev
[ 22.233324] usbcore: registered new driver usbhid
[ 22.233326] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 22.233345] md: linear personality registered for level -1
[ 22.233348] md: raid0 personality registered for level 0
[ 22.233351] md: raid1 personality registered for level 1
[ 22.233353] md: raid10 personality registered for level 10
[ 22.249867] raid6: int64x1 1640 MB/s
[ 22.266829] raid6: int64x2 2078 MB/s
[ 22.283785] raid6: int64x4 2015 MB/s
[ 22.300782] raid6: int64x8 1480 MB/s
[ 22.317730] raid6: sse2x1 2253 MB/s
[ 22.334710] raid6: sse2x2 2984 MB/s
[ 22.351664] raid6: sse2x4 3308 MB/s
[ 22.351666] raid6: using algorithm sse2x4 (3308 MB/s)
[ 22.351669] md: raid6 personality registered for level 6
[ 22.351672] md: raid5 personality registered for level 5
[ 22.351674] md: raid4 personality registered for level 4
[ 22.351677] raid5: automatically using best checksumming function: generic_sse
[ 22.356656] generic_sse: 5496.000 MB/sec
[ 22.356658] raid5: using function: generic_sse (5496.000 MB/sec)
[ 22.356661] md: multipath personality registered for level -4
[ 22.356663] md: faulty personality registered for level -5
[ 22.356666] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 22.356669] md: bitmap version 4.39
[ 22.356758] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
[ 22.356942] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 22.356995] ALSA device list:
[ 22.356996] No soundcards found.
[ 22.357071] TCP bic registered
[ 22.357081] NET: Registered protocol family 1
[ 22.357088] NET: Registered protocol family 17
[ 22.357191] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-34 processors (version 2.00.00)
[ 22.357236] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4
[ 22.357239] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6
[ 22.357241] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
[ 22.357340] ACPI: (supports S0 S3 S4 S5)
[ 22.357375] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 22.357455] Freeing unused kernel memory: 284k freed
[ 22.587692] GSI 20 sharing vector 0x32 and IRQ 20
[ 22.587698] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 50
[ 22.588021] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 22.588163] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 22.588229] ehci_hcd 0000:00:13.2: irq 50, io mem 0xc0002000
[ 22.588242] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.588394] usb usb1: configuration #1 chosen from 1 choice
[ 22.588436] hub 1-0:1.0: USB hub found
[ 22.588444] hub 1-0:1.0: 8 ports detected
[ 22.717694] USB Universal Host Controller Interface driver v3.0
[ 22.737792] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 22.737864] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 50
[ 22.738208] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 22.738337] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 22.738360] ohci_hcd 0000:00:13.0: irq 50, io mem 0xc0000000
[ 22.793084] usb usb2: configuration #1 chosen from 1 choice
[ 22.793132] hub 2-0:1.0: USB hub found
[ 22.793145] hub 2-0:1.0: 4 ports detected
[ 22.893855] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 50
[ 22.894011] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 22.894146] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 22.894171] ohci_hcd 0000:00:13.1: irq 50, io mem 0xc0001000
[ 22.948778] usb usb3: configuration #1 chosen from 1 choice
[ 22.948818] hub 3-0:1.0: USB hub found
[ 22.948831] hub 3-0:1.0: 4 ports detected
[ 23.071501] sl811: driver sl811-hcd, 19 May 2005
[ 23.160610] Registering unionfs 20060916-2203
[ 23.160615] unionfs: debugging is not enabled
[ 23.487014] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678]
[ 24.225533] kjournald starting. Commit interval 5 seconds
[ 24.225545] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.254535] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 28.254539] sdhci: Copyright(c) Pierre Ossman
[ 28.254582] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 28.254608] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 177
[ 28.254974] mmc0: SDHCI at 0xc0209000 irq 177 DMA
[ 28.255187] mmc1: SDHCI at 0xc0208c00 irq 177 DMA
[ 28.255382] mmc2: SDHCI at 0xc0208800 irq 177 DMA
[ 28.409354] NET: Registered protocol family 23
[ 28.605613] nsc-ircc, chip->init
[ 28.605629] nsc-ircc, Found chip at base=0x02e
[ 28.605673] nsc-ircc, driver loaded (Dag Brattli)
[ 28.605680] nsc_ircc_open(), can't get iobase of 0x2f8
[ 28.605728] nsc-ircc, Found chip at base=0x02e
[ 28.605770] nsc-ircc, driver loaded (Dag Brattli)
[ 28.605774] nsc_ircc_open(), can't get iobase of 0x2f8
[ 28.606061] pnp: Device 00:0a disabled.
[ 29.604973] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 29.605007] GSI 22 sharing vector 0x3A and IRQ 22
[ 29.605011] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 58
[ 29.606631] eth0: RTL8169sb/8110sb at 0xffffc20000aa4400, 00:0a:e4:e8:33:62, IRQ 58
[ 30.329405] ieee80211_crypt: registered algorithm 'NULL'
[ 31.300029] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 31.300034] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
[ 31.321717] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[ 31.321747] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 31.321749] Yenta: Routing CardBus interrupts to PCI
[ 31.321756] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[ 31.769001] input: PC Speaker as /class/input/input3
[ 32.922458] Yenta: ISA IRQ mask 0x0ef8, PCI irq 177
[ 32.922465] Socket status: 30000006
[ 32.922468] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
[ 32.922476] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 32.922480] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 32.922483] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x52ffffff
[ 32.924898] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 217
[ 33.438785] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 33.505221] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 217
[ 33.609386] MC'97 1 converters and GPIO not ready (0xff00)
[ 34.531838] bcm43xx driver
[ 34.531960] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 169
[ 40.470939] EXT3 FS on hda1, internal journal
[ 41.174277] Adding 1269092k swap on /dev/hda4. Priority:-1 extents:1 across:1269092k
[ 56.914549] ttyS1: LSR safety check engaged!
[ 58.981678] fbsplash: console 1 using theme 'sabayon'
[ 58.987426] fbsplash: switched splash state to 'on' on console 1
[ 59.029430] fbsplash: console 2 using theme 'sabayon'
[ 59.059231] fbsplash: switched splash state to 'on' on console 2
[ 59.070300] fbsplash: console 3 using theme 'sabayon'
[ 59.076022] fbsplash: switched splash state to 'on' on console 3
[ 59.081997] fbsplash: console 4 using theme 'sabayon'
[ 59.087606] fbsplash: switched splash state to 'on' on console 4
[ 59.093155] fbsplash: console 5 using theme 'sabayon'
[ 59.098876] fbsplash: switched splash state to 'on' on console 5
[ 59.102983] fbsplash: console 11 using theme 'sabayon'
[ 59.108676] fbsplash: switched splash state to 'on' on console 11
[ 62.019168] [drm] Initialized drm 1.0.1 20051102
[ 62.034946] GSI 23 sharing vector 0x42 and IRQ 23
[ 62.034953] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 66
[ 62.065588] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 62.650770] [drm] Setting GART location based on new memory map
[ 62.651577] [drm] Loading R300 Microcode
[ 62.651616] [drm] writeback test succeeded in 1 usecs
[ 82.071449] bcm43xx: InitVals (bcm43xx_initvalXX.fw) file-format error. Please fix your bcm43xx firmware files.
[ 84.602597] bcm43xx: InitVals (bcm43xx_initvalXX.fw) file-format error. Please fix your bcm43xx firmware files.
[ 84.607514] r8169: eth0: link down
[ 94.970571] firmware_loading_store: unexpected value (0)
[ 94.970954] bcm43xx: Error: InitVals "bcm43xx_initval05.fw" not available or load failed.
[ 105.338808] Losing some ticks... checking if CPU frequency changed.
[ 112.443049] APIC error on CPU0: 00(40)
[ 155.651425] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[ 204.357797] APIC error on CPU0: 40(40)
[ 216.740426] APIC error on CPU0: 40(40)
[ 234.348902] APIC error on CPU0: 40(40)
[ 234.594480] APIC error on CPU0: 40(40)



inoltre va a scatti e se apro open office ci mette una eternità, la scheda video la rileva correttamente e carica le xgl

aspetto responso intanto paciocco lol
Abacus
Abacus
Young Hen
 
Posts: 25
Joined: Mon Nov 27, 2006 11:15
Location: Torino

Postby Abacus » Sat Dec 02, 2006 18:13

allora, per prima cosa la cpu legge quella giusta, ma come cpu MHz mi da 800.000 (info date con kinfocenter sul sistema che va a scatti) il che mi sa di strano visto che dovrebbe essere


Turion 64 ML-34 TMDML33BKX5LD 1.80 GHz 1600 MHz 1 MB 90 nm 34 W


le mie domande sono queste:
1- che cos'è quel numero????? e da dove viene???
2- potrebbe essere lui la causa dell'andare a scatti di tutto il sistema????

per meglio capirci riporto i dati sul processore di kinfocenter:

processor 0
vendor_id AuthenticAMD
cpu family 15
model 36
model name AMD Turion(tm) 64 Mobile Technology ML-34
stepping 2
cpu MHz 800.000
cache size 1024 kb
fpu yes
fpu_exception yes
cpuid level 1
wp yes
flags fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ( ma che cosa sono)
bogomips 1601.04
TLB size 1024 4k pages
clflush size 64
cache_alignment 64
address sizes 40 bits physical, 48 bits virtual
power managemen ts fid vid ttp tm stc



boh... Abacus
Abacus
Young Hen
 
Posts: 25
Joined: Mon Nov 27, 2006 11:15
Location: Torino


Return to Sabayon Linux Discussioni Generali

Who is online

Users browsing this forum: No registered users and 1 guest

cron