coudn't start kdeinit

Tutto ciò che è pertinente a Sabayon Linux, indipendentemente dall'architettura e dall'ambiente grafico

Moderator: Moderators

coudn't start kdeinit

Postby silvio » Sat Dec 02, 2006 12:49

Complimenti a tutti gli sviluppatori di Sabayon per l'ottimo lavoro svolto.Splendida la grafica e lodevole il desiderio di rendere subito fruibile il sistema con tanti programmi e tutti gli orpelli necessari(flashplayer codec video etc..).Vengo al problema per cui ho postato.Dopo aver installato Sabayon ho seguito questi step:emerge --sync emerge portage etc-update poi emerge firestarter e dopo sono cominciati i problemi come da titolo.Il sistema non si avviava e kde non partiva restituendomi una schermata bianca con il messaggio indicato nel titolo.Riuscivo ad avviare fluxbox e gnome anche se quest'ultimo mi restituiva diversi messaggi di errore.L'accelerazione 3D funziona perfettamente e anche tutti gli effetti grafici(cubo che ruota,finestre di gomma..)La mia scheda video è una Nvidia GeForce 6200 e il processore è un Celeron 2.7G con 512 MB di ram.Mi scuso per la lunghezza del post ma ho cercato di inserire tutti i dati.
Output di dmesg
SMP Mon Nov 20 14:35:43 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] On node 0 totalpages: 130992
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] Normal zone: 126896 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fac80
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000524 MSFT 0x00000097) @ 0x1ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x06000524 MSFT 0x00000097) @ 0x1ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x06000524 MSFT 0x00000097) @ 0x1ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x06000524 MSFT 0x00000097) @ 0x1ffc0040
[ 0.000000] ACPI: DSDT (v001 P4V80 P4V80000 0x00000000 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[ 0.000000] Detected 2666.812 MHz processor.
[ 21.261614] Built 1 zonelists. Total pages: 130992
[ 21.261619] Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/hdb1 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1
[ 21.262014] mapped APIC to ffffd000 (fee00000)
[ 21.262018] mapped IOAPIC to ffffc000 (fec00000)
[ 21.262021] Enabling fast FPU save and restore... done.
[ 21.262025] Enabling unmasked SIMD FPU exception support... done.
[ 21.262030] Initializing CPU#0
[ 21.262127] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 21.262240] Console: colour dummy device 80x25
[ 21.262570] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.262929] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.273436] Memory: 502820k/523968k available (5336k kernel code, 20612k reserved, 2090k data, 476k init, 0k highmem)
[ 21.273441] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.332939] Calibrating delay using timer specific routine.. 5338.15 BogoMIPS (lpj=2669079)
[ 21.332982] Security Framework v1.0.0 initialized
[ 21.332987] SELinux: Initializing.
[ 21.333003] SELinux: Starting in permissive mode
[ 21.333012] selinux_register_security: Registering secondary module capability
[ 21.333015] Capability LSM initialized as secondary
[ 21.333031] Mount-cache hash table entries: 512
[ 21.333168] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 21.333181] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 21.333189] monitor/mwait feature present.
[ 21.333192] using mwait in idle threads.
[ 21.333200] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 21.333203] CPU: L2 cache: 256K
[ 21.333206] CPU: Hyper-Threading is disabled
[ 21.333208] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
[ 21.333221] Compat vDSO mapped to ffffe000.
[ 21.333237] Checking 'hlt' instruction... OK.
[ 21.337229] SMP alternatives: switching to UP code
[ 21.337876] Freeing SMP alternatives: 28k freed
[ 21.337883] ACPI: Core revision 20060707
[ 21.340610] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01
[ 21.340657] Total of 1 processors activated (5338.15 BogoMIPS).
[ 21.341421] ENABLING IO-APIC IRQs
[ 21.341740] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.452660] Brought up 1 CPUs
[ 21.452732] migration_cost=0
[ 21.452899] checking if image is initramfs... it is
[ 21.831730] Freeing initrd memory: 7660k freed
[ 21.832156] NET: Registered protocol family 16
[ 21.832358] EISA bus registered
[ 21.832366] ACPI: bus type pci registered
[ 21.832459] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 21.832468] PCI: Using configuration type 1
[ 21.832471] Setting up standard PCI resources
[ 21.850080] ACPI: Interpreter enabled
[ 21.850086] ACPI: Using IOAPIC for interrupt routing
[ 21.851692] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.851699] PCI: Probing PCI hardware (bus 00)
[ 21.856097] Boot video device is 0000:01:00.0
[ 21.856184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.870561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 21.879311] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.879657] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.879975] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.880302] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.880657] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.880977] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.881293] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.881629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.881753] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.881777] pnp: PnP ACPI init
[ 21.888063] pnp: PnP ACPI: found 14 devices
[ 21.888071] PnPBIOS: Disabled by ACPI PNP
[ 21.888312] SCSI subsystem initialized
[ 21.888446] usbcore: registered new driver usbfs
[ 21.888506] usbcore: registered new driver hub
[ 21.888572] PCI: Using ACPI for IRQ routing
[ 21.888577] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.894928] PCI: Bridge: 0000:00:01.0
[ 21.894931] IO window: disabled.
[ 21.894938] MEM window: f3e00000-f7efffff
[ 21.894943] PREFETCH window: d3d00000-f3cfffff
[ 21.894970] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.895002] NET: Registered protocol family 2
[ 21.903406] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.903523] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.903623] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.903673] TCP: Hash tables configured (established 16384 bind 8192)
[ 21.903676] TCP reno registered
[ 21.910848] audit: initializing netlink socket (disabled)
[ 21.910866] audit(1165056697.844:1): initialized
[ 21.910930] Total HugeTLB memory allocated, 0
[ 21.911024] VFS: Disk quotas dquot_6.5.1
[ 21.911048] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.911108] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 21.911125] Coda Kernel/Venus communications, v6.0.0, [email protected]
[ 21.911567] Installing knfsd (copyright (C) 1996 [email protected] ).
[ 21.911837] NTFS driver 2.1.27 [Flags: R/W].
[ 21.911875] QNX4 filesystem 0.2.3 registered.
[ 21.911878] fuse init (API version 7.7)
[ 21.912021] JFS: nTxBlock = 3989, nTxLock = 31916
[ 21.915532] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 21.915731] SGI XFS Quota Management subsystem
[ 21.915783] SELinux: Registering netfilter hooks
[ 21.922331] Initializing Cryptographic API
[ 21.922340] io scheduler noop registered
[ 21.922362] io scheduler anticipatory registered (default)
[ 21.922371] io scheduler deadline registered
[ 21.922387] io scheduler cfq registered
[ 21.922476] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 21.998389] lp: driver loaded but no devices found
[ 21.998531] Real Time Clock Driver v1.12ac
[ 21.998608] toshiba: not a supported Toshiba laptop
[ 22.006122] ppdev: user-space parallel port driver
[ 22.006327] vesafb: framebuffer at 0xe0000000, mapped to 0xe0a80000, using 3072k, total 262144k
[ 22.006332] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 22.006335] vesafb: protected mode interface info at c000:d3a0
[ 22.006339] vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440
[ 22.006341] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 22.006360] vesafb: scrolling: redraw
[ 22.006363] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 22.033832] Console: switching to colour frame buffer device 128x48
[ 22.060675] fbsplash: console 0 using theme 'sabayon'
[ 22.277510] fbsplash: switched splash state to 'on' on console 0
[ 22.277952] fb0: VESA VGA frame buffer device
[ 22.278025] ACPI: Power Button (FF) [PWRF]
[ 22.278063] ACPI: Power Button (CM) [PWRB]
[ 22.278155] Using specific hotkey driver
[ 22.278314] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 22.278321] ACPI: Getting cpuindex for acpiid 0x2
[ 22.282026] ibm_acpi: ec object not found
[ 22.282065] isapnp: Scanning for PnP cards...
[ 22.592466] isapnp: No Plug & Play device found
[ 22.592472] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 22.592664] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.593007] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.594200] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.594632] parport: PnPBIOS parport detected.
[ 22.594740] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 22.678222] lp0: using parport0 (interrupt-driven).
[ 22.678469] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 22.678747] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.678764] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.678776] parport0: cannot grant exclusive access for device parkbd
[ 22.679056] mice: PS/2 mouse device common for all mice
[ 22.679060] ts: Compaq touchscreen protocol output
[ 22.679296] Floppy drive(s): fd0 is 1.44M
[ 22.695907] FDC 0 is a post-1991 82077
[ 22.697917] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 22.698393] loop: loaded (max 8 devices)
[ 22.698397] Compaq SMART2 Driver (v 2.6.0)
[ 22.698464] HP CISS Driver (v 3.6.10)
[ 22.698686] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 22.698741] MM: desc_per_page = 128
[ 22.713115] input: AT Translated Set 2 keyboard as /class/input/input0
[ 23.576479] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
[ 23.581538] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.581544] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.581595] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 23.581625] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[ 23.581633] PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
[ 23.581662] VP_IDE: chipset revision 6
[ 23.581664] VP_IDE: not 100% native mode: will probe irqs later
[ 23.581677] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 23.581686] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[ 23.581705] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 23.581719] Probing IDE interface ide0...
[ 23.967453] hda: Maxtor 6K040L0, ATA DISK drive
[ 24.221717] hdb: Maxtor 6E040L0, ATA DISK drive
[ 24.273081] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.273251] Probing IDE interface ide1...
[ 25.065279] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[ 25.371587] ide1 at 0x170-0x177,0x376 on irq 15
[ 25.373417] hda: max request size: 128KiB
[ 25.382652] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 25.382793] hda: cache flushes supported
[ 25.382848] hda: hda1 hda2 < hda5 >
[ 25.408823] hdb: max request size: 128KiB
[ 25.415077] hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 25.415210] hdb: cache flushes supported
[ 25.415257] hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 >
[ 25.450491] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 25.450502] Uniform CD-ROM driver Revision: 3.20
[ 25.458318] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 25.458321] Detecting Adaptec I2O RAID controllers...
[ 25.458888] Adaptec aacraid driver (1.1-5[2409]-mh2)
[ 25.459277] NCR53c406a: no available ports found
[ 25.459281] sym53c416.c: Version 1.0.0-ac
[ 25.459308] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[ 25.459485] Emulex LightPulse Fibre Channel SCSI driver 8.1.9
[ 25.459489] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 25.481990] Failed initialization of WD-7000 SCSI card!
[ 25.482170] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 25.482175] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
[ 25.482227] megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
[ 25.482348] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 25.482467] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 25.482565] 3ware Storage Controller device driver for Linux v1.26.02.001.
[ 25.482625] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[ 25.482677] nsp32: loading...
[ 25.482730] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[ 25.482818] libata version 2.00 loaded.
[ 25.483278] sata_via 0000:00:0f.0: version 2.0
[ 25.483301] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[ 25.483308] PCI: VIA IRQ fixup for 0000:00:0f.0, from 11 to 9
[ 25.483348] sata_via 0000:00:0f.0: routed to hard irq line 9
[ 25.483435] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
[ 25.483473] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
[ 25.483495] scsi2 : sata_via
[ 25.684383] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 25.694595] ATA: abnormal status 0x7F on port 0xEC07
[ 25.694614] scsi3 : sata_via
[ 25.894775] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 25.904972] ATA: abnormal status 0x7F on port 0xE407
[ 25.905421] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 25.905476] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[ 25.905539] osst :I: Tape driver with OnStream support version 0.99.4
[ 25.905541] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 25.905713] I2O subsystem v1.325
[ 25.905716] i2o: max drivers = 8
[ 25.905888] I2O Configuration OSM v1.323
[ 25.905989] I2O Bus Adapter OSM v1.317
[ 25.906036] I2O Block Device OSM v1.325
[ 25.906173] I2O SCSI Peripheral OSM v1.316
[ 25.906218] I2O ProcFS OSM v1.316
[ 25.906268] Fusion MPT base driver 3.04.01
[ 25.906271] Copyright (c) 1999-2005 LSI Logic Corporation
[ 25.906276] Fusion MPT SPI Host driver 3.04.01
[ 25.906362] Fusion MPT FC Host driver 3.04.01
[ 25.906430] Fusion MPT SAS Host driver 3.04.01
[ 25.906498] Fusion MPT misc device (ioctl) driver 3.04.01
[ 25.906558] mptctl: Registered with Fusion MPT base driver
[ 25.906562] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 25.906565] Fusion MPT LAN driver 3.04.01
[ 25.906580] ieee1394: Initialized config rom entry `ip1394'
[ 25.906747] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 25.906750] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 25.906803] usbmon: debugfs is not available
[ 25.906851] usbcore: registered new driver usblp
[ 25.906855] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 25.906858] Initializing USB Mass Storage driver...
[ 25.906905] usbcore: registered new driver usb-storage
[ 25.906908] USB Mass Storage support registered.
[ 25.906950] usbcore: registered new driver libusual
[ 25.906994] usbcore: registered new driver hiddev
[ 25.907037] usbcore: registered new driver usbhid
[ 25.907040] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 25.907069] md: linear personality registered for level -1
[ 25.907072] md: raid0 personality registered for level 0
[ 25.907074] md: raid1 personality registered for level 1
[ 25.907077] md: raid10 personality registered for level 10
[ 25.923149] raid6: int32x1 710 MB/s
[ 25.940080] raid6: int32x2 707 MB/s
[ 25.957097] raid6: int32x4 613 MB/s
[ 25.974035] raid6: int32x8 472 MB/s
[ 25.990924] raid6: mmxx1 1585 MB/s
[ 26.007880] raid6: mmxx2 1648 MB/s
[ 26.024826] raid6: sse1x1 960 MB/s
[ 26.041804] raid6: sse1x2 1050 MB/s
[ 26.058741] raid6: sse2x1 1992 MB/s
[ 26.075679] raid6: sse2x2 1714 MB/s
[ 26.075682] raid6: using algorithm sse2x1 (1992 MB/s)
[ 26.075687] md: raid6 personality registered for level 6
[ 26.075689] md: raid5 personality registered for level 5
[ 26.075691] md: raid4 personality registered for level 4
[ 26.075696] raid5: automatically using best checksumming function: pIII_sse
[ 26.080660] pIII_sse : 4276.000 MB/sec
[ 26.080663] raid5: using function: pIII_sse (4276.000 MB/sec)
[ 26.080666] md: multipath personality registered for level -4
[ 26.080669] md: faulty personality registered for level -5
[ 26.080672] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 26.080675] md: bitmap version 4.39
[ 26.080860] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
[ 26.081200] EISA: Probing bus 0 at eisa.0
[ 26.081324] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 26.081505] specify port
[ 26.081512] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[ 26.082189] ALSA device list:
[ 26.082192] No soundcards found.
[ 26.082357] TCP bic registered
[ 26.082378] NET: Registered protocol family 1
[ 26.082388] NET: Registered protocol family 17
[ 26.082582] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 26.082588] Using IPI No-Shortcut mode
[ 26.082657] Time: tsc clocksource has been installed.
[ 26.082699] ACPI: (supports S0 S1 S3 S4 S5)
[ 26.082738] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 26.083347] Freeing unused kernel memory: 476k freed
[ 26.362014] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[ 26.362024] PCI: VIA IRQ fixup for 0000:00:10.4, from 10 to 1
[ 26.362058] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 26.362166] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 26.362226] ehci_hcd 0000:00:10.4: irq 177, io mem 0xf7fff800
[ 26.362234] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.362454] usb usb1: configuration #1 chosen from 1 choice
[ 26.362524] hub 1-0:1.0: USB hub found
[ 26.362537] hub 1-0:1.0: 8 ports detected
[ 26.508900] USB Universal Host Controller Interface driver v3.0
[ 26.509072] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[ 26.509081] PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
[ 26.509111] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.509197] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 26.509228] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c400
[ 26.509440] usb usb2: configuration #1 chosen from 1 choice
[ 26.509536] hub 2-0:1.0: USB hub found
[ 26.509549] hub 2-0:1.0: 2 ports detected
[ 26.610930] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[ 26.610938] PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1
[ 26.610966] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 26.611041] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 26.611071] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000c800
[ 26.611280] usb usb3: configuration #1 chosen from 1 choice
[ 26.611355] hub 3-0:1.0: USB hub found
[ 26.611369] hub 3-0:1.0: 2 ports detected
[ 26.712606] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[ 26.712614] PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
[ 26.712642] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 26.712714] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 26.712743] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000cc00
[ 26.712967] usb usb4: configuration #1 chosen from 1 choice
[ 26.713039] hub 4-0:1.0: USB hub found
[ 26.713053] hub 4-0:1.0: 2 ports detected
[ 26.814308] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[ 26.814316] PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 1
[ 26.814344] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 26.814419] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 26.814449] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d000
[ 26.814674] usb usb5: configuration #1 chosen from 1 choice
[ 26.814750] hub 5-0:1.0: USB hub found
[ 26.814764] hub 5-0:1.0: 2 ports detected
[ 26.946139] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 26.980318] sl811: driver sl811-hcd, 19 May 2005
[ 27.136894] Registering unionfs 20060916-2203
[ 27.136898] unionfs: debugging is not enabled
[ 27.177241] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
[ 27.177246] Copyright (c) 1999-2006 Intel Corporation.
[ 28.262902] kjournald starting. Commit interval 5 seconds
[ 28.262920] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.632455] via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
[ 36.634803] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
[ 36.634813] PCI: VIA IRQ fixup for 0000:00:12.0, from 10 to 9
[ 36.637150] eth0: VIA Rhine II at 0x1d400, 00:13:8f:21:6b:2b, IRQ 185.
[ 36.637870] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[ 38.362209] Linux agpgart interface v0.101 (c) Dave Jones
[ 38.374576] agpgart: Detected VIA P4M800CE chipset
[ 40.257292] agpgart: AGP aperture is 64M @ 0xf8000000
[ 40.259847] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 193
[ 43.026037] input: PC Speaker as /class/input/input2
[ 45.366052] nvidia: module license 'NVIDIA' taints kernel.
[ 45.621712] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[ 45.622061] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9629 Wed Nov 1 19:30:07 PST 2006
[ 56.404978] EXT3 FS on hdb1, internal journal
[ 57.256475] Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k
[ 57.278159] Adding 1028120k swap on /dev/hdb5. Priority:-2 extents:1 across:1028120k
[ 79.989140] fbsplash: console 1 using theme 'sabayon'
[ 79.995210] fbsplash: switched splash state to 'on' on console 1
[ 80.105372] fbsplash: console 2 using theme 'sabayon'
[ 80.111408] fbsplash: switched splash state to 'on' on console 2
[ 80.218147] fbsplash: console 3 using theme 'sabayon'
[ 80.224178] fbsplash: switched splash state to 'on' on console 3
[ 80.275827] fbsplash: console 4 using theme 'sabayon'
[ 80.281840] fbsplash: switched splash state to 'on' on console 4
[ 80.303690] fbsplash: console 5 using theme 'sabayon'
[ 80.427288] fbsplash: switched splash state to 'on' on console 5
[ 80.432327] fbsplash: console 11 using theme 'sabayon'
[ 80.438338] fbsplash: switched splash state to 'on' on console 11
[ 82.958055] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 82.958289] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 82.958461] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 101.710375] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

e questo è il responso di lspci
0.000000] Linux version 2.6.18-gentoo-r4 ([email protected]) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #1 SMP Mon Nov 20 14:35:43 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] On node 0 totalpages: 130992
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] Normal zone: 126896 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fac80
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000524 MSFT 0x00000097) @ 0x1ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x06000524 MSFT 0x00000097) @ 0x1ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x06000524 MSFT 0x00000097) @ 0x1ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x06000524 MSFT 0x00000097) @ 0x1ffc0040
[ 0.000000] ACPI: DSDT (v001 P4V80 P4V80000 0x00000000 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[ 0.000000] Detected 2666.812 MHz processor.
[ 21.261614] Built 1 zonelists. Total pages: 130992
[ 21.261619] Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/hdb1 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1
[ 21.262014] mapped APIC to ffffd000 (fee00000)
[ 21.262018] mapped IOAPIC to ffffc000 (fec00000)
[ 21.262021] Enabling fast FPU save and restore... done.
[ 21.262025] Enabling unmasked SIMD FPU exception support... done.
[ 21.262030] Initializing CPU#0
[ 21.262127] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 21.262240] Console: colour dummy device 80x25
[ 21.262570] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.262929] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.273436] Memory: 502820k/523968k available (5336k kernel code, 20612k reserved, 2090k data, 476k init, 0k highmem)
[ 21.273441] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.332939] Calibrating delay using timer specific routine.. 5338.15 BogoMIPS (lpj=2669079)
[ 21.332982] Security Framework v1.0.0 initialized
[ 21.332987] SELinux: Initializing.
[ 21.333003] SELinux: Starting in permissive mode
[ 21.333012] selinux_register_security: Registering secondary module capability
[ 21.333015] Capability LSM initialized as secondary
[ 21.333031] Mount-cache hash table entries: 512
[ 21.333168] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 21.333181] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 21.333189] monitor/mwait feature present.
[ 21.333192] using mwait in idle threads.
[ 21.333200] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 21.333203] CPU: L2 cache: 256K
[ 21.333206] CPU: Hyper-Threading is disabled
[ 21.333208] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
[ 21.333221] Compat vDSO mapped to ffffe000.
[ 21.333237] Checking 'hlt' instruction... OK.
[ 21.337229] SMP alternatives: switching to UP code
[ 21.337876] Freeing SMP alternatives: 28k freed
[ 21.337883] ACPI: Core revision 20060707
[ 21.340610] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01
[ 21.340657] Total of 1 processors activated (5338.15 BogoMIPS).
[ 21.341421] ENABLING IO-APIC IRQs
[ 21.341740] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.452660] Brought up 1 CPUs
[ 21.452732] migration_cost=0
[ 21.452899] checking if image is initramfs... it is
[ 21.831730] Freeing initrd memory: 7660k freed
[ 21.832156] NET: Registered protocol family 16
[ 21.832358] EISA bus registered
[ 21.832366] ACPI: bus type pci registered
[ 21.832459] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 21.832468] PCI: Using configuration type 1
[ 21.832471] Setting up standard PCI resources
[ 21.850080] ACPI: Interpreter enabled
[ 21.850086] ACPI: Using IOAPIC for interrupt routing
[ 21.851692] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.851699] PCI: Probing PCI hardware (bus 00)
[ 21.856097] Boot video device is 0000:01:00.0
[ 21.856184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.870561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 21.879311] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.879657] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.879975] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.880302] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.880657] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.880977] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.881293] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.881629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.881753] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.881777] pnp: PnP ACPI init
[ 21.888063] pnp: PnP ACPI: found 14 devices
[ 21.888071] PnPBIOS: Disabled by ACPI PNP
[ 21.888312] SCSI subsystem initialized
[ 21.888446] usbcore: registered new driver usbfs
[ 21.888506] usbcore: registered new driver hub
[ 21.888572] PCI: Using ACPI for IRQ routing
[ 21.888577] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.894928] PCI: Bridge: 0000:00:01.0
[ 21.894931] IO window: disabled.
[ 21.894938] MEM window: f3e00000-f7efffff
[ 21.894943] PREFETCH window: d3d00000-f3cfffff
[ 21.894970] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.895002] NET: Registered protocol family 2
[ 21.903406] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.903523] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.903623] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.903673] TCP: Hash tables configured (established 16384 bind 8192)
[ 21.903676] TCP reno registered
[ 21.910848] audit: initializing netlink socket (disabled)
[ 21.910866] audit(1165056697.844:1): initialized
[ 21.910930] Total HugeTLB memory allocated, 0
[ 21.911024] VFS: Disk quotas dquot_6.5.1
[ 21.911048] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.911108] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 21.911125] Coda Kernel/Venus communications, v6.0.0, [email protected]
[ 21.911567] Installing knfsd (copyright (C) 1996 [email protected] ).
[ 21.911837] NTFS driver 2.1.27 [Flags: R/W].
[ 21.911875] QNX4 filesystem 0.2.3 registered.
[ 21.911878] fuse init (API version 7.7)
[ 21.912021] JFS: nTxBlock = 3989, nTxLock = 31916
[ 21.915532] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 21.915731] SGI XFS Quota Management subsystem
[ 21.915783] SELinux: Registering netfilter hooks
[ 21.922331] Initializing Cryptographic API
[ 21.922340] io scheduler noop registered
[ 21.922362] io scheduler anticipatory registered (default)
[ 21.922371] io scheduler deadline registered
[ 21.922387] io scheduler cfq registered
[ 21.922476] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 21.998389] lp: driver loaded but no devices found
[ 21.998531] Real Time Clock Driver v1.12ac
[ 21.998608] toshiba: not a supported Toshiba laptop
[ 22.006122] ppdev: user-space parallel port driver
[ 22.006327] vesafb: framebuffer at 0xe0000000, mapped to 0xe0a80000, using 3072k, total 262144k
[ 22.006332] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 22.006335] vesafb: protected mode interface info at c000:d3a0
[ 22.006339] vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440
[ 22.006341] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 22.006360] vesafb: scrolling: redraw
[ 22.006363] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 22.033832] Console: switching to colour frame buffer device 128x48
[ 22.060675] fbsplash: console 0 using theme 'sabayon'
[ 22.277510] fbsplash: switched splash state to 'on' on console 0
[ 22.277952] fb0: VESA VGA frame buffer device
[ 22.278025] ACPI: Power Button (FF) [PWRF]
[ 22.278063] ACPI: Power Button (CM) [PWRB]
[ 22.278155] Using specific hotkey driver
[ 22.278314] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 22.278321] ACPI: Getting cpuindex for acpiid 0x2
[ 22.282026] ibm_acpi: ec object not found
[ 22.282065] isapnp: Scanning for PnP cards...
[ 22.592466] isapnp: No Plug & Play device found
[ 22.592472] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 22.592664] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.593007] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.594200] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.594632] parport: PnPBIOS parport detected.
[ 22.594740] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 22.678222] lp0: using parport0 (interrupt-driven).
[ 22.678469] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 22.678747] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.678764] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.678776] parport0: cannot grant exclusive access for device parkbd
[ 22.679056] mice: PS/2 mouse device common for all mice
[ 22.679060] ts: Compaq touchscreen protocol output
[ 22.679296] Floppy drive(s): fd0 is 1.44M
[ 22.695907] FDC 0 is a post-1991 82077
[ 22.697917] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 22.698393] loop: loaded (max 8 devices)
[ 22.698397] Compaq SMART2 Driver (v 2.6.0)
[ 22.698464] HP CISS Driver (v 3.6.10)
[ 22.698686] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 22.698741] MM: desc_per_page = 128
[ 22.713115] input: AT Translated Set 2 keyboard as /class/input/input0
[ 23.576479] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
[ 23.581538] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.581544] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.581595] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 23.581625] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[ 23.581633] PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
[ 23.581662] VP_IDE: chipset revision 6
[ 23.581664] VP_IDE: not 100% native mode: will probe irqs later
[ 23.581677] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 23.581686] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[ 23.581705] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 23.581719] Probing IDE interface ide0...
[ 23.967453] hda: Maxtor 6K040L0, ATA DISK drive
[ 24.221717] hdb: Maxtor 6E040L0, ATA DISK drive
[ 24.273081] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.273251] Probing IDE interface ide1...
[ 25.065279] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[ 25.371587] ide1 at 0x170-0x177,0x376 on irq 15
[ 25.373417] hda: max request size: 128KiB
[ 25.382652] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 25.382793] hda: cache flushes supported
[ 25.382848] hda: hda1 hda2 < hda5 >
[ 25.408823] hdb: max request size: 128KiB
[ 25.415077] hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 25.415210] hdb: cache flushes supported
[ 25.415257] hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 >
[ 25.450491] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 25.450502] Uniform CD-ROM driver Revision: 3.20
[ 25.458318] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 25.458321] Detecting Adaptec I2O RAID controllers...
[ 25.458888] Adaptec aacraid driver (1.1-5[2409]-mh2)
[ 25.459277] NCR53c406a: no available ports found
[ 25.459281] sym53c416.c: Version 1.0.0-ac
[ 25.459308] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[ 25.459485] Emulex LightPulse Fibre Channel SCSI driver 8.1.9
[ 25.459489] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 25.481990] Failed initialization of WD-7000 SCSI card!
[ 25.482170] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 25.482175] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
[ 25.482227] megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
[ 25.482348] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 25.482467] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 25.482565] 3ware Storage Controller device driver for Linux v1.26.02.001.
[ 25.482625] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[ 25.482677] nsp32: loading...
[ 25.482730] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[ 25.482818] libata version 2.00 loaded.
[ 25.483278] sata_via 0000:00:0f.0: version 2.0
[ 25.483301] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[ 25.483308] PCI: VIA IRQ fixup for 0000:00:0f.0, from 11 to 9
[ 25.483348] sata_via 0000:00:0f.0: routed to hard irq line 9
[ 25.483435] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
[ 25.483473] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
[ 25.483495] scsi2 : sata_via
[ 25.684383] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 25.694595] ATA: abnormal status 0x7F on port 0xEC07
[ 25.694614] scsi3 : sata_via
[ 25.894775] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 25.904972] ATA: abnormal status 0x7F on port 0xE407
[ 25.905421] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 25.905476] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[ 25.905539] osst :I: Tape driver with OnStream support version 0.99.4
[ 25.905541] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 25.905713] I2O subsystem v1.325
[ 25.905716] i2o: max drivers = 8
[ 25.905888] I2O Configuration OSM v1.323
[ 25.905989] I2O Bus Adapter OSM v1.317
[ 25.906036] I2O Block Device OSM v1.325
[ 25.906173] I2O SCSI Peripheral OSM v1.316
[ 25.906218] I2O ProcFS OSM v1.316
[ 25.906268] Fusion MPT base driver 3.04.01
[ 25.906271] Copyright (c) 1999-2005 LSI Logic Corporation
[ 25.906276] Fusion MPT SPI Host driver 3.04.01
[ 25.906362] Fusion MPT FC Host driver 3.04.01
[ 25.906430] Fusion MPT SAS Host driver 3.04.01
[ 25.906498] Fusion MPT misc device (ioctl) driver 3.04.01
[ 25.906558] mptctl: Registered with Fusion MPT base driver
[ 25.906562] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 25.906565] Fusion MPT LAN driver 3.04.01
[ 25.906580] ieee1394: Initialized config rom entry `ip1394'
[ 25.906747] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 25.906750] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 25.906803] usbmon: debugfs is not available
[ 25.906851] usbcore: registered new driver usblp
[ 25.906855] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 25.906858] Initializing USB Mass Storage driver...
[ 25.906905] usbcore: registered new driver usb-storage
[ 25.906908] USB Mass Storage support registered.
[ 25.906950] usbcore: registered new driver libusual
[ 25.906994] usbcore: registered new driver hiddev
[ 25.907037] usbcore: registered new driver usbhid
[ 25.907040] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 25.907069] md: linear personality registered for level -1
[ 25.907072] md: raid0 personality registered for level 0
[ 25.907074] md: raid1 personality registered for level 1
[ 25.907077] md: raid10 personality registered for level 10
[ 25.923149] raid6: int32x1 710 MB/s
[ 25.940080] raid6: int32x2 707 MB/s
[ 25.957097] raid6: int32x4 613 MB/s
[ 25.974035] raid6: int32x8 472 MB/s
[ 25.990924] raid6: mmxx1 1585 MB/s
[ 26.007880] raid6: mmxx2 1648 MB/s
[ 26.024826] raid6: sse1x1 960 MB/s
[ 26.041804] raid6: sse1x2 1050 MB/s
[ 26.058741] raid6: sse2x1 1992 MB/s
[ 26.075679] raid6: sse2x2 1714 MB/s
[ 26.075682] raid6: using algorithm sse2x1 (1992 MB/s)
[ 26.075687] md: raid6 personality registered for level 6
[ 26.075689] md: raid5 personality registered for level 5
[ 26.075691] md: raid4 personality registered for level 4
[ 26.075696] raid5: automatically using best checksumming function: pIII_sse
[ 26.080660] pIII_sse : 4276.000 MB/sec
[ 26.080663] raid5: using function: pIII_sse (4276.000 MB/sec)
[ 26.080666] md: multipath personality registered for level -4
[ 26.080669] md: faulty personality registered for level -5
[ 26.080672] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 26.080675] md: bitmap version 4.39
[ 26.080860] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
[ 26.081200] EISA: Probing bus 0 at eisa.0
[ 26.081324] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 26.081505] specify port
[ 26.081512] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[ 26.082189] ALSA device list:
[ 26.082192] No soundcards found.
[ 26.082357] TCP bic registered
[ 26.082378] NET: Registered protocol family 1
[ 26.082388] NET: Registered protocol family 17
[ 26.082582] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 26.082588] Using IPI No-Shortcut mode
[ 26.082657] Time: tsc clocksource has been installed.
[ 26.082699] ACPI: (supports S0 S1 S3 S4 S5)
[ 26.082738] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 26.083347] Freeing unused kernel memory: 476k freed
[ 26.362014] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[ 26.362024] PCI: VIA IRQ fixup for 0000:00:10.4, from 10 to 1
[ 26.362058] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 26.362166] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 26.362226] ehci_hcd 0000:00:10.4: irq 177, io mem 0xf7fff800
[ 26.362234] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.362454] usb usb1: configuration #1 chosen from 1 choice
[ 26.362524] hub 1-0:1.0: USB hub found
[ 26.362537] hub 1-0:1.0: 8 ports detected
[ 26.508900] USB Universal Host Controller Interface driver v3.0
[ 26.509072] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[ 26.509081] PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
[ 26.509111] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.509197] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 26.509228] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c400
[ 26.509440] usb usb2: configuration #1 chosen from 1 choice
[ 26.509536] hub 2-0:1.0: USB hub found
[ 26.509549] hub 2-0:1.0: 2 ports detected
[ 26.610930] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[ 26.610938] PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1
[ 26.610966] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 26.611041] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 26.611071] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000c800
[ 26.611280] usb usb3: configuration #1 chosen from 1 choice
[ 26.611355] hub 3-0:1.0: USB hub found
[ 26.611369] hub 3-0:1.0: 2 ports detected
[ 26.712606] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[ 26.712614] PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
[ 26.712642] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 26.712714] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 26.712743] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000cc00
[ 26.712967] usb usb4: configuration #1 chosen from 1 choice
[ 26.713039] hub 4-0:1.0: USB hub found
[ 26.713053] hub 4-0:1.0: 2 ports detected
[ 26.814308] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[ 26.814316] PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 1
[ 26.814344] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 26.814419] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 26.814449] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d000
[ 26.814674] usb usb5: configuration #1 chosen from 1 choice
[ 26.814750] hub 5-0:1.0: USB hub found
[ 26.814764] hub 5-0:1.0: 2 ports detected
[ 26.946139] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 26.980318] sl811: driver sl811-hcd, 19 May 2005
[ 27.136894] Registering unionfs 20060916-2203
[ 27.136898] unionfs: debugging is not enabled
[ 27.177241] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
[ 27.177246] Copyright (c) 1999-2006 Intel Corporation.
[ 28.262902] kjournald starting. Commit interval 5 seconds
[ 28.262920] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.632455] via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
[ 36.634803] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
[ 36.634813] PCI: VIA IRQ fixup for 0000:00:12.0, from 10 to 9
[ 36.637150] eth0: VIA Rhine II at 0x1d400, 00:13:8f:21:6b:2b, IRQ 185.
[ 36.637870] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[ 38.362209] Linux agpgart interface v0.101 (c) Dave Jones
[ 38.374576] agpgart: Detected VIA P4M800CE chipset
[ 40.257292] agpgart: AGP aperture is 64M @ 0xf8000000
[ 40.259847] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 193
[ 43.026037] input: PC Speaker as /class/input/input2
[ 45.366052] nvidia: module license 'NVIDIA' taints kernel.
[ 45.621712] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[ 45.622061] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9629 Wed Nov 1 19:30:07 PST 2006
[ 56.404978] EXT3 FS on hdb1, internal journal
[ 57.256475] Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k
[ 57.278159] Adding 1028120k swap on /dev/hdb5. Priority:-2 extents:1 across:1028120k
[ 79.989140] fbsplash: console 1 using theme 'sabayon'
[ 79.995210] fbsplash: switched splash state to 'on' on console 1
[ 80.105372] fbsplash: console 2 using theme 'sabayon'
[ 80.111408] fbsplash: switched splash state to 'on' on console 2
[ 80.218147] fbsplash: console 3 using theme 'sabayon'
[ 80.224178] fbsplash: switched splash state to 'on' on console 3
[ 80.275827] fbsplash: console 4 using theme 'sabayon'
[ 80.281840] fbsplash: switched splash state to 'on' on console 4
[ 80.303690] fbsplash: console 5 using theme 'sabayon'
[ 80.427288] fbsplash: switched splash state to 'on' on console 5
[ 80.432327] fbsplash: console 11 using theme 'sabayon'
[ 80.438338] fbsplash: switched splash state to 'on' on console 11
[ 82.958055] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 82.958289] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 82.958461] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 101.710375] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
silvio
Baby Hen
 
Posts: 19
Joined: Sat Dec 02, 2006 12:06

Return to Sabayon Linux Discussioni Generali

Who is online

Users browsing this forum: No registered users and 1 guest