Fotocamera Dig. USB

Tutto ciò che è pertinente a Sabayon Linux, indipendentemente dall'architettura e dall'ambiente grafico

Moderator: Moderators

Fotocamera Dig. USB

Postby py67 » Wed Nov 29, 2006 20:43

...Ottima, direi il complimento per questa distro, ma..., si permettetemelo, la mia fotocamera digitale che viene riconosciuta non vuole essere montata da utente in f-spot, e Digikam non la riconosce, altre distro naturalmente la rilevano e la gestiscono egregiamente.

La fotocamera in questione e la Canon Powershot s60.

PS: Ho appena installato la 3.2
py67
Simple Hen
 
Posts: 57
Joined: Wed Dec 28, 2005 15:01

Postby lxnay » Thu Nov 30, 2006 0:19

qual'è l'errore?
mi puoi dare l'output di "lsusb" con la fotocamera collegata?

grazie :)
Image
Join us on IRC (chat.freenode.net #sabayon or WebChat)
Submit bugs to our Bug Tracker
Follow me on Twitter
Add me on Facebook
Add me on Google+
lxnay
Land Owner
 
Posts: 3595
Joined: Thu Oct 13, 2005 23:16
Location: Italy

Postby py67 » Thu Nov 30, 2006 5:28

Ecco qua:

sabayonx86 py67 # lsusb
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 005: ID 04a9:30b2 Canon, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 6253:0100
Bus 002 Device 003: ID 045e:009d Microsoft Corp.
sabayonx86 py67 #
py67
Simple Hen
 
Posts: 57
Joined: Wed Dec 28, 2005 15:01

Postby lxnay » Thu Nov 30, 2006 9:10

ok, bene, potrei chiederti anche "dmesg" ?
Image
Join us on IRC (chat.freenode.net #sabayon or WebChat)
Submit bugs to our Bug Tracker
Follow me on Twitter
Add me on Facebook
Add me on Google+
lxnay
Land Owner
 
Posts: 3595
Joined: Thu Oct 13, 2005 23:16
Location: Italy

Postby py67 » Thu Nov 30, 2006 12:57

Scusami se non ti ho postato subito le info che mi hai chiesto, ecco dmsg:

sabayonx86 py67 # dmesg
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:90000000)
[ 0.000000] Detected 2058.605 MHz processor.
[ 25.883784] Built 1 zonelists. Total pages: 262128
[ 25.883788] Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/hda2 quiet init=/linuxrc splash=silent,theme:sabayon CONSOLE=/dev/tty1 vga=0x318
[ 25.884005] mapped APIC to ffffd000 (fee00000)
[ 25.884008] mapped IOAPIC to ffffc000 (fec00000)
[ 25.884011] Enabling fast FPU save and restore... done.
[ 25.884013] Enabling unmasked SIMD FPU exception support... done.
[ 25.884016] Initializing CPU#0
[ 25.884050] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 25.884096] spurious 8259A interrupt: IRQ7.
[ 25.884118] Console: colour dummy device 80x25
[ 25.884436] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 25.884847] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 25.902606] Memory: 1022656k/1048512k available (5336k kernel code, 25108k reserved, 2090k data, 476k init, 131008k highmem)
[ 25.902610] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 25.961976] Calibrating delay using timer specific routine.. 4118.41 BogoMIPS (lpj=2059208)
[ 25.962010] Security Framework v1.0.0 initialized
[ 25.962015] SELinux: Initializing.
[ 25.962027] SELinux: Starting in permissive mode
[ 25.962032] selinux_register_security: Registering secondary module capability
[ 25.962035] Capability LSM initialized as secondary
[ 25.962046] Mount-cache hash table entries: 512
[ 25.962144] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 25.962150] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 25.962157] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 25.962160] CPU: L2 Cache: 512K (64 bytes/line)
[ 25.962162] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 25.962170] Compat vDSO mapped to ffffe000.
[ 25.962179] Checking 'hlt' instruction... OK.
[ 25.966229] SMP alternatives: switching to UP code
[ 25.966516] Freeing SMP alternatives: 28k freed
[ 25.966519] ACPI: Core revision 20060707
[ 25.971847] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[ 25.971865] Total of 1 processors activated (4118.41 BogoMIPS).
[ 25.972003] ENABLING IO-APIC IRQs
[ 25.972172] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 26.083877] Brought up 1 CPUs
[ 26.083906] migration_cost=0
[ 26.084011] checking if image is initramfs... it is
[ 26.408624] Freeing initrd memory: 7660k freed
[ 26.408850] NET: Registered protocol family 16
[ 26.408986] EISA bus registered
[ 26.408989] ACPI: bus type pci registered
[ 26.408995] PCI: Using MMCONFIG
[ 26.409017] PCI: No mmconfig possible on 0:18
[ 26.409333] Setting up standard PCI resources
[ 26.418561] ACPI: Interpreter enabled
[ 26.418563] ACPI: Using IOAPIC for interrupt routing
[ 26.418955] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 26.418958] PCI: Probing PCI hardware (bus 00)
[ 26.422138] PCI: Transparent bridge - 0000:00:09.0
[ 26.422354] Boot video device is 0000:05:00.0
[ 26.422417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 26.473604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 26.474988] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 26.475242] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.475499] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 26.475751] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 26.476005] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.476257] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 26.476526] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.476777] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 26.477029] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 26.477296] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.477554] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 26.477804] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 26.478056] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.478315] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.478579] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.478837] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.479129] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 26.479411] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 26.479698] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 26.479979] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 26.480198] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 26.480500] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 26.480795] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 26.481087] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 26.481382] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 26.481680] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 26.481973] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 26.482265] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 26.482569] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 26.482871] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 26.483172] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 26.483478] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 26.485608] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 26.485617] pnp: PnP ACPI init
[ 26.489728] pnp: PnP ACPI: found 12 devices
[ 26.489732] PnPBIOS: Disabled by ACPI PNP
[ 26.489863] SCSI subsystem initialized
[ 26.489908] usbcore: registered new driver usbfs
[ 26.489930] usbcore: registered new driver hub
[ 26.489957] PCI: Using ACPI for IRQ routing
[ 26.489961] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 26.490521] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[ 26.490524] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 26.490527] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 26.490530] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[ 26.490533] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 26.490536] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 26.490560] PCI: Bridge: 0000:00:09.0
[ 26.490562] IO window: b000-cfff
[ 26.490565] MEM window: f3000000-f30fffff
[ 26.490567] PREFETCH window: disabled.
[ 26.490570] PCI: Bridge: 0000:00:0b.0
[ 26.490572] IO window: a000-afff
[ 26.490574] MEM window: disabled.
[ 26.490576] PREFETCH window: disabled.
[ 26.490578] PCI: Bridge: 0000:00:0c.0
[ 26.490580] IO window: 9000-9fff
[ 26.490582] MEM window: disabled.
[ 26.490584] PREFETCH window: disabled.
[ 26.490586] PCI: Bridge: 0000:00:0d.0
[ 26.490589] IO window: 8000-8fff
[ 26.490591] MEM window: disabled.
[ 26.490592] PREFETCH window: disabled.
[ 26.490596] PCI: Bridge: 0000:00:0e.0
[ 26.490597] IO window: disabled.
[ 26.490600] MEM window: f0000000-f2ffffff
[ 26.490603] PREFETCH window: e0000000-efffffff
[ 26.490609] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 26.490616] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 26.490621] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 26.490626] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 26.490631] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 26.490648] NET: Registered protocol family 2
[ 26.500486] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 26.500624] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 26.501412] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 26.501805] TCP: Hash tables configured (established 131072 bind 65536)
[ 26.501808] TCP reno registered
[ 26.504395] audit: initializing netlink socket (disabled)
[ 26.504407] audit(1164870417.815:1): initialized
[ 26.504477] highmem bounce pool size: 64 pages
[ 26.504480] Total HugeTLB memory allocated, 0
[ 26.504528] VFS: Disk quotas dquot_6.5.1
[ 26.504547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.504586] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 26.504597] Coda Kernel/Venus communications, v6.0.0, [email protected]
[ 26.504741] Installing knfsd (copyright (C) 1996 [email protected]).
[ 26.504909] NTFS driver 2.1.27 [Flags: R/W].
[ 26.504936] QNX4 filesystem 0.2.3 registered.
[ 26.504938] fuse init (API version 7.7)
[ 26.504991] JFS: nTxBlock = 8052, nTxLock = 64419
[ 26.507782] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 26.507917] SGI XFS Quota Management subsystem
[ 26.507950] SELinux: Registering netfilter hooks
[ 26.512456] Initializing Cryptographic API
[ 26.512461] io scheduler noop registered
[ 26.512476] io scheduler anticipatory registered (default)
[ 26.512484] io scheduler deadline registered
[ 26.512503] io scheduler cfq registered
[ 26.547392] PCI: Linking AER extended capability on 0000:00:0b.0
[ 26.547395] PCI: Linking AER extended capability on 0000:00:0c.0
[ 26.547399] PCI: Linking AER extended capability on 0000:00:0d.0
[ 26.547402] PCI: Linking AER extended capability on 0000:00:0e.0
[ 26.547541] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 26.547544] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 26.547558] assign_interrupt_mode Found MSI capability
[ 26.547590] Allocate Port Service[0000:00:0b.0:pcie00]
[ 26.547619] Allocate Port Service[0000:00:0b.0:pcie03]
[ 26.547650] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 26.547652] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 26.547666] assign_interrupt_mode Found MSI capability
[ 26.547678] Allocate Port Service[0000:00:0c.0:pcie00]
[ 26.547701] Allocate Port Service[0000:00:0c.0:pcie03]
[ 26.547726] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 26.547729] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 26.547742] assign_interrupt_mode Found MSI capability
[ 26.547755] Allocate Port Service[0000:00:0d.0:pcie00]
[ 26.547777] Allocate Port Service[0000:00:0d.0:pcie03]
[ 26.547804] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 26.547806] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 26.547819] assign_interrupt_mode Found MSI capability
[ 26.547831] Allocate Port Service[0000:00:0e.0:pcie00]
[ 26.547855] Allocate Port Service[0000:00:0e.0:pcie03]
[ 26.569996] lp: driver loaded but no devices found
[ 26.570055] Real Time Clock Driver v1.12ac
[ 26.570087] toshiba: not a supported Toshiba laptop
[ 26.574551] ppdev: user-space parallel port driver
[ 26.574638] vesafb: framebuffer at 0xe0000000, mapped to 0xf8d00000, using 6144k, total 262144k
[ 26.574641] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 26.574644] vesafb: protected mode interface info at c000:d6f0
[ 26.574647] vesafb: pmi: set display start = c00cd726, set palette = c00cd790
[ 26.574649] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 26.574659] vesafb: scrolling: redraw
[ 26.574662] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 26.592657] Console: switching to colour frame buffer device 128x48
[ 26.610832] fbsplash: console 0 using theme 'sabayon'
[ 26.808006] fbsplash: switched splash state to 'on' on console 0
[ 26.808317] fb0: VESA VGA frame buffer device
[ 26.808358] ACPI: Power Button (FF) [PWRF]
[ 26.808365] ACPI: Power Button (CM) [PWRB]
[ 26.808423] Using specific hotkey driver
[ 26.808517] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 26.808522] ACPI: Getting cpuindex for acpiid 0x1
[ 26.811607] ibm_acpi: ec object not found
[ 26.811622] isapnp: Scanning for PnP cards...
[ 27.122992] isapnp: No Plug & Play device found
[ 27.122996] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 27.123092] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.123277] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 27.123710] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.123872] parport: PnPBIOS parport detected.
[ 27.123908] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 27.207749] lp0: using parport0 (interrupt-driven).
[ 27.207861] PNP: No PS/2 controller found. Probing ports directly.
[ 27.209536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 27.209754] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 27.209759] parport0: cannot grant exclusive access for device parkbd
[ 27.209880] mice: PS/2 mouse device common for all mice
[ 27.209882] ts: Compaq touchscreen protocol output
[ 30.218605] floppy0: no floppy controllers found
[ 30.218945] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 30.219123] loop: loaded (max 8 devices)
[ 30.219125] Compaq SMART2 Driver (v 2.6.0)
[ 30.219152] HP CISS Driver (v 3.6.10)
[ 30.219233] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 30.219255] MM: desc_per_page = 128
[ 30.219619] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 30.219622] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 30.219652] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 30.219670] NFORCE-CK804: chipset revision 242
[ 30.219672] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 30.219676] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[ 30.219678] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[ 30.219682] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[ 30.219687] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 30.219695] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 30.219701] Probing IDE interface ide0...
[ 30.484405] hda: Maxtor 6Y160P0, ATA DISK drive
[ 30.740142] hdb: WDC WD102AA, ATA DISK drive
[ 30.793448] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 30.793498] Probing IDE interface ide1...
[ 31.057815] hdc: Maxtor 6L250R0, ATA DISK drive
[ 31.466394] hdd: LITE-ON DVDRW LDW-411S, ATAPI CD/DVD-ROM drive
[ 31.521752] ide1 at 0x170-0x177,0x376 on irq 15
[ 31.522452] hda: max request size: 512KiB
[ 31.535906] hda: Host Protected Area detected.
[ 31.535907] current capacity is 320170943 sectors (163927 MB)
[ 31.535908] native capacity is 320173056 sectors (163928 MB)
[ 31.559539] hda: Host Protected Area disabled.
[ 31.559542] hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133)
[ 31.559671] hda: cache flushes supported
[ 31.559695] hda: hda1 hda2 hda3 < hda5 hda6 >
[ 31.618938] hdb: max request size: 128KiB
[ 31.635695] hdb: Host Protected Area detected.
[ 31.635696] current capacity is 20041967 sectors (10261 MB)
[ 31.635697] native capacity is 20044080 sectors (10262 MB)
[ 31.637535] hdb: Host Protected Area disabled.
[ 31.637537] hdb: 20044080 sectors (10262 MB) w/2048KiB Cache, CHS=19885/16/63
[ 31.637541] hdb: cache flushes not supported
[ 31.637554] hdb: hdb1 hdb2 hdb3
[ 31.652394] hdc: max request size: 512KiB
[ 31.673809] hdc: Host Protected Area detected.
[ 31.673811] current capacity is 490232639 sectors (250999 MB)
[ 31.673812] native capacity is 490234752 sectors (251000 MB)
[ 31.696042] hdc: Host Protected Area disabled.
[ 31.696044] hdc: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133)
[ 31.697574] hdc: cache flushes supported
[ 31.697587] hdc: hdc1 hdc2
[ 31.717069] hdd: ATAPI 47X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 31.717074] Uniform CD-ROM driver Revision: 3.20
[ 31.729216] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 31.729218] Detecting Adaptec I2O RAID controllers...
[ 31.729456] Adaptec aacraid driver (1.1-5[2409]-mh2)
[ 31.729611] NCR53c406a: no available ports found
[ 31.729614] sym53c416.c: Version 1.0.0-ac
[ 31.729626] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[ 31.729685] Emulex LightPulse Fibre Channel SCSI driver 8.1.9
[ 31.729687] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 31.752032] Failed initialization of WD-7000 SCSI card!
[ 31.752096] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 31.752099] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
[ 31.752124] megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
[ 31.752167] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 31.752218] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 31.752257] 3ware Storage Controller device driver for Linux v1.26.02.001.
[ 31.752279] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[ 31.752302] nsp32: loading...
[ 31.752322] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[ 31.752363] libata version 2.00 loaded.
[ 31.752687] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 31.752711] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[ 31.752736] osst :I: Tape driver with OnStream support version 0.99.4
[ 31.752738] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 31.752810] I2O subsystem v1.325
[ 31.752812] i2o: max drivers = 8
[ 31.752870] I2O Configuration OSM v1.323
[ 31.752909] I2O Bus Adapter OSM v1.317
[ 31.752926] I2O Block Device OSM v1.325
[ 31.752976] I2O SCSI Peripheral OSM v1.316
[ 31.752993] I2O ProcFS OSM v1.316
[ 31.753011] Fusion MPT base driver 3.04.01
[ 31.753012] Copyright (c) 1999-2005 LSI Logic Corporation
[ 31.753016] Fusion MPT SPI Host driver 3.04.01
[ 31.753045] Fusion MPT FC Host driver 3.04.01
[ 31.753071] Fusion MPT SAS Host driver 3.04.01
[ 31.753097] Fusion MPT misc device (ioctl) driver 3.04.01
[ 31.753120] mptctl: Registered with Fusion MPT base driver
[ 31.753122] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 31.753124] Fusion MPT LAN driver 3.04.01
[ 31.753135] ieee1394: Initialized config rom entry `ip1394'
[ 31.753194] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 31.753196] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 31.753217] usbmon: debugfs is not available
[ 31.753236] usbcore: registered new driver usblp
[ 31.753239] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 31.753241] Initializing USB Mass Storage driver...
[ 31.753258] usbcore: registered new driver usb-storage
[ 31.753262] USB Mass Storage support registered.
[ 31.753279] usbcore: registered new driver libusual
[ 31.753297] usbcore: registered new driver hiddev
[ 31.753314] usbcore: registered new driver usbhid
[ 31.753316] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 31.753331] md: linear personality registered for level -1
[ 31.753333] md: raid0 personality registered for level 0
[ 31.753336] md: raid1 personality registered for level 1
[ 31.753338] md: raid10 personality registered for level 10
[ 31.770113] raid6: int32x1 812 MB/s
[ 31.787095] raid6: int32x2 839 MB/s
[ 31.804056] raid6: int32x4 757 MB/s
[ 31.821086] raid6: int32x8 507 MB/s
[ 31.838048] raid6: mmxx1 1703 MB/s
[ 31.855006] raid6: mmxx2 3027 MB/s
[ 31.872008] raid6: sse1x1 1550 MB/s
[ 31.888986] raid6: sse1x2 2617 MB/s
[ 31.905955] raid6: sse2x1 2582 MB/s
[ 31.922937] raid6: sse2x2 3121 MB/s
[ 31.922939] raid6: using algorithm sse2x2 (3121 MB/s)
[ 31.922941] md: raid6 personality registered for level 6
[ 31.922944] md: raid5 personality registered for level 5
[ 31.922946] md: raid4 personality registered for level 4
[ 31.922948] raid5: automatically using best checksumming function: pIII_sse
[ 31.927926] pIII_sse : 6528.000 MB/sec
[ 31.927928] raid5: using function: pIII_sse (6528.000 MB/sec)
[ 31.927930] md: multipath personality registered for level -4
[ 31.927933] md: faulty personality registered for level -5
[ 31.927935] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 31.927937] md: bitmap version 4.39
[ 31.928008] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
[ 31.928164] EISA: Probing bus 0 at eisa.0
[ 31.928214] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 31.928277] specify port
[ 31.928281] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[ 31.928533] ALSA device list:
[ 31.928534] No soundcards found.
[ 31.928600] TCP bic registered
[ 31.928611] NET: Registered protocol family 1
[ 31.928616] NET: Registered protocol family 17
[ 31.928672] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
[ 31.928762] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 31.928764] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 31.928767] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 31.928770] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 31.928773] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
[ 31.928775] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 31.928814] Using IPI No-Shortcut mode
[ 31.928858] ACPI: (supports S0 S1 S4 S5)
[ 31.928884] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 31.928925] Time: tsc clocksource has been installed.
[ 31.929165] Freeing unused kernel memory: 476k freed
[ 32.126893] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[ 32.126901] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 217
[ 32.126912] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 32.126915] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 32.126967] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 32.126990] ehci_hcd 0000:00:02.1: debug port 1
[ 32.126994] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 32.127003] ehci_hcd 0000:00:02.1: irq 217, io mem 0xfeb00000
[ 32.127008] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 32.127101] usb usb1: configuration #1 chosen from 1 choice
[ 32.127131] hub 1-0:1.0: USB hub found
[ 32.127138] hub 1-0:1.0: 10 ports detected
[ 32.257291] USB Universal Host Controller Interface driver v3.0
[ 32.277599] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 32.277974] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 32.277981] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 225
[ 32.277993] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 32.277996] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 32.278035] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 32.278050] ohci_hcd 0000:00:02.0: irq 225, io mem 0xf3100000
[ 32.331514] usb usb2: configuration #1 chosen from 1 choice
[ 32.331547] hub 2-0:1.0: USB hub found
[ 32.331554] hub 2-0:1.0: 10 ports detected
[ 32.455624] sl811: driver sl811-hcd, 19 May 2005
[ 32.547322] Registering unionfs 20060916-2203
[ 32.547326] unionfs: debugging is not enabled
[ 32.573410] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
[ 32.573413] Copyright (c) 1999-2006 Intel Corporation.
[ 32.798950] usb 2-7: new low speed USB device using ohci_hcd and address 2
[ 32.992952] usb 2-7: configuration #1 chosen from 1 choice
[ 33.009919] input: Twinhan Tech Remote Control as /class/input/input0
[ 33.009950] input: USB HID v1.10 Keyboard [Twinhan Tech Remote Control] on usb-0000:00:02.0-7
[ 33.019896] input: Twinhan Tech Remote Control as /class/input/input1
[ 33.019955] input: USB HID v1.10 Mouse [Twinhan Tech Remote Control] on usb-0000:00:02.0-7
[ 33.281452] usb 2-9: new low speed USB device using ohci_hcd and address 3
[ 33.473510] usb 2-9: configuration #1 chosen from 1 choice
[ 33.483526] input: Microsoft Microsoft Wireless Optical Desktop 2.10 as /class/input/input2
[ 33.483554] input: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop 2.10] on usb-0000:00:02.0-9
[ 33.515540] input: Microsoft Microsoft Wireless Optical Desktop 2.10 as /class/input/input3
[ 33.515606] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop 2.10] on usb-0000:00:02.0-9
[ 33.626511] kjournald starting. Commit interval 5 seconds
[ 33.626519] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.645564] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
[ 44.647147] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 44.647155] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 233
[ 44.647160] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 44.647167] forcedeth: using HIGHDMA
[ 45.161026] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0
[ 45.353926] Linux agpgart interface v0.101 (c) Dave Jones
[ 45.771045] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[ 45.771052] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) -> IRQ 50
[ 45.771075] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 46.084307] intel8x0_measure_ac97_clock: measured 51697 usecs
[ 46.084311] intel8x0: clocking to 46820
[ 46.089499] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 46.089517] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 46.541071] input: PC Speaker as /class/input/input4
[ 47.301450] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 47.301458] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 58
[ 47.418604] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 47.427929] flexcop-pci: will use the HW PID filter.
[ 47.427935] flexcop-pci: card revision 2
[ 47.428171] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 47.428177] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 66
[ 47.432057] DVB: registering new adapter (FlexCop Digital TV device).
[ 47.433499] b2c2-flexcop: MAC address = 00:d0:d7:06:21:64
[ 47.433662] b2c2-flexcop: i2c master_xfer failed
[ 47.604371] nvidia: module license 'NVIDIA' taints kernel.
[ 47.858880] b2c2-flexcop: i2c master_xfer failed
[ 47.859154] b2c2-flexcop: i2c master_xfer failed
[ 47.859157] mt352_read_register: readreg error (reg=127, ret==-121)
[ 47.859429] b2c2-flexcop: i2c master_xfer failed
[ 47.859431] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
[ 47.859434] Unknown/Unsupported NXT chip: 00 00 00 00 00
[ 47.859707] b2c2-flexcop: i2c master_xfer failed
[ 47.859710] lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
[ 47.859983] b2c2-flexcop: i2c master_xfer failed
[ 47.860256] b2c2-flexcop: i2c master_xfer failed
[ 47.860258] stv0297_readreg: readreg error (reg == 0x80, ret == -121)
[ 47.860383] b2c2-flexcop: found the vp310 (aka mt312) at i2c address: 0x0e
[ 47.860386] DVB: registering frontend 0 (Zarlink VP310 DVB-S)...
[ 47.861735] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S (old version)' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 47.918144] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 47.918152] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 74
[ 47.918160] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 47.918353] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9629 Wed Nov 1 19:30:07 PST 2006
[ 65.471747] EXT3 FS on hda2, internal journal
[ 66.772917] kjournald starting. Commit interval 5 seconds
[ 66.773231] EXT3 FS on hda5, internal journal
[ 66.773235] EXT3-fs: mounted filesystem with ordered data mode.
[ 66.874766] NTFS volume version 3.1.
[ 66.913899] kjournald starting. Commit interval 5 seconds
[ 66.913999] EXT3 FS on hdc2, internal journal
[ 66.914003] EXT3-fs: mounted filesystem with ordered data mode.
[ 66.982688] Adding 979924k swap on /dev/hda6. Priority:-1 extents:1 across:979924k
[ 66.983032] Adding 262576k swap on /dev/hdb2. Priority:-2 extents:1 across:262576k
[ 87.753357] fbsplash: console 1 using theme 'sabayon'
[ 87.783581] fbsplash: switched splash state to 'on' on console 1
[ 87.794357] fbsplash: console 2 using theme 'sabayon'
[ 87.798278] fbsplash: switched splash state to 'on' on console 2
[ 87.805290] fbsplash: console 3 using theme 'sabayon'
[ 87.809227] fbsplash: switched splash state to 'on' on console 3
[ 87.813968] fbsplash: console 4 using theme 'sabayon'
[ 87.817897] fbsplash: switched splash state to 'on' on console 4
[ 87.822632] fbsplash: console 5 using theme 'sabayon'
[ 87.826570] fbsplash: switched splash state to 'on' on console 5
[ 87.829822] fbsplash: console 11 using theme 'sabayon'
[ 87.833762] fbsplash: switched splash state to 'on' on console 11
[ 106.874907] hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 106.874914] hdb: drive_cmd: error=0x04 { DriveStatusError }
[ 106.874918] ide: failed opcode was: 0xef
[ 106.876157] hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 106.876164] hdb: drive_cmd: error=0x04 { DriveStatusError }
[ 106.876167] ide: failed opcode was: 0xef
[ 82.777000] Time: acpi_pm clocksource has been installed.
[ 202.447000] usb 2-3: new full speed USB device using ohci_hcd and address 4
[ 202.636000] usb 2-3: configuration #1 chosen from 1 choice
[ 222.693000] usb 2-3: USB disconnect, address 4
[ 345.208000] usb 2-3: new full speed USB device using ohci_hcd and address 5
[ 345.399000] usb 2-3: configuration #1 chosen from 1 choice
[ 529.452000] usb 2-3: USB disconnect, address 5
[20817.299000] usb 2-3: new full speed USB device using ohci_hcd and address 6
[20817.487000] usb 2-3: configuration #1 chosen from 1 choice
py67
Simple Hen
 
Posts: 57
Joined: Wed Dec 28, 2005 15:01

Postby Dark_MaGe » Thu Nov 30, 2006 18:11

se non ricordo male le canon necessitano di un driver a parte per funzionare anche su windows, in quanto non vengono riconosciute come memorie di massa a differenza della stragrande maggioranza delle altre macchine fotografiche digitali
Dark_MaGe
Your Farmer
 
Posts: 1699
Joined: Thu Jun 29, 2006 8:19
Location: Catania Italy

Postby py67 » Thu Nov 30, 2006 18:22

Dark_MaGe wrote:se non ricordo male le canon necessitano di un driver a parte per funzionare anche su windows, in quanto non vengono riconosciute come memorie di massa a differenza della stragrande maggioranza delle altre macchine fotografiche digitali


Puo' darsi, ma nelle versioni precedenti di Sabayon, vedi 3.0, 3.1 non ho mai avuto problemi, mi sembra più un problema di permessi, con Slackware avevo patito le pene dell'inferno ma dopo aver installato a modo Digikam e mi sembra libgphoto2 e poi aver settato i vari permessi tutto si era risolto, qui io non vedo il gruppo camera che di solito è associato alle fotocamere. :(

Proverò a ricompilare Digikam le varie dipendenze e ricontrollero' i permessi.

Ultima curiosità ma la versione musicale che leggo al boot del CD è quello che penso? Cioè un kernel patchato per il real-time?
py67
Simple Hen
 
Posts: 57
Joined: Wed Dec 28, 2005 15:01


Return to Sabayon Linux Discussioni Generali

Who is online

Users browsing this forum: No registered users and 3 guests

cron