Sabayon Community

by **slayer** » Tue Aug 29, 2006 13:54

ADMIN EDIT - APPENDED SOLVED TO TITLE

Hello im new, im trying to install from the live cd when it starts to search for sabayon this is what it said
Thanks

File "/opt/anaconda/usr/lib/anaconda/gui.py", line 874, in nextClicked
self.dispatch.gotoNext()
File "/opt/anaconda/usr/lib/anaconda/dispatch.py", line 179, in gotoNext
self.moveStep()
File "/opt/anaconda/usr/lib/anaconda/dispatch.py", line 247, in moveStep
rc = apply(func, self.bindArgs(args))
File "/opt/anaconda/usr/lib/anaconda/upgrade.py", line 49, in findRootParts
id.rootParts = findExistingRoots(intf, id, chroot)
File "/opt/anaconda/usr/lib/anaconda/upgrade.py", line 80, in findExistingRoots
upgradeany = upgradeany)
File "/opt/anaconda/usr/lib/anaconda/partedUtils.py", line 656, in findExistingRootPartitions
isys.umount(mountpoint)
File "/opt/anaconda/usr/lib/anaconda/isys.py", line 217, in umount
os.rmdir(what)
OSError: [Errno 16] Device or resource busy: '/mnt/gentoo'

by **lxnay** » Tue Aug 29, 2006 14:36

you did something weird.
Please reboot and retry.

by **cvill64** » Tue Aug 29, 2006 16:01

If you submit a bug report, no need to submit here

by **slayer** » Tue Aug 29, 2006 23:55

ok i reboot and updated the installer but the same thing happens im using the installer supplied with sabayon,
Thanks

by **cvill64** » Wed Aug 30, 2006 0:06

Output of dmesg and lpsci please

by **slayer** » Wed Aug 30, 2006 0:31

sabayonuser@sabayonx86 ~ $ lpsci
bash: lpsci: command not found

[4294667.296000] Linux version 2.6.17-reiser4-r1-smp (root@phobos) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Tue Aug 22 08:04:20 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e8000 - 00000000000ec000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 0000000017f00000 (usable)
[4294667.296000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 383MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 98048
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] Normal zone: 93952 pages, LIFO batch:31
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e8010
[4294667.296000] ACPI: RSDT (v001 COMPAQ CARS6C31 0x00000001 0x00000000) @ 0x000e8080
[4294667.296000] ACPI: FADT (v001 COMPAQ CARS6C31 0x00000001 0x00000000) @ 0x000e80cc
[4294667.296000] ACPI: SSDT (v001 COMPAQ CARS6C3 0x00000001 MSFT 0x01000007) @ 0x000e8187
[4294667.296000] ACPI: DSDT (v001 COMPAQ DSDTTBL 0x00000001 MSFT 0x01000007) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0xee08
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 17f00000:e80c0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/ram0 initrd=/boot/smp.igz init=/linuxrc cdroot doslowusb looptype=squashfs max_loop=64 loop=/livecd.squashfs splash=silent,theme:default vga=791 CONSOLE=/dev/tty1 quiet BOOT_IMAGE=/boot/smp
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (0130a000)
[4294667.296000] Enabling fast FPU save and restore... done.
[4294667.296000] Enabling unmasked SIMD FPU exception support... done.
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[4294667.296000] Detected 930.586 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour dummy device 80x25
[4294667.695000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.696000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294667.732000] Memory: 376292k/392192k available (5578k kernel code, 15424k reserved, 2032k data, 480k init, 0k highmem)
[4294667.732000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.792000] Calibrating delay using timer specific routine.. 1861.77 BogoMIPS (lpj=930889)
[4294667.792000] Security Framework v1.0.0 initialized
[4294667.792000] SELinux: Initializing.
[4294667.792000] SELinux: Starting in permissive mode
[4294667.792000] selinux_register_security: Registering secondary module capability
[4294667.792000] Capability LSM initialized as secondary
[4294667.792000] Mount-cache hash table entries: 512
[4294667.792000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.792000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.792000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294667.792000] CPU: L2 cache: 256K
[4294667.792000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[4294667.792000] Intel machine check architecture supported.
[4294667.792000] Intel machine check reporting enabled on CPU#0.
[4294667.792000] Checking 'hlt' instruction... OK.
[4294667.796000] SMP alternatives: switching to UP code
[4294667.797000] Freeing SMP alternatives: 32k freed
[4294667.801000] ACPI: setting ELCR to 0200 (from 0828)
[4294667.803000] CPU0: Intel Pentium III (Coppermine) stepping 06
[4294667.803000] SMP motherboard not detected.
[4294667.803000] Local APIC not detected. Using dummy APIC emulation.
[4294667.803000] Brought up 1 CPUs
[4294667.803000] migration_cost=0
[4294667.803000] checking if image is initramfs... it is
[4294668.332000] Freeing initrd memory: 3302k freed
[4294668.333000] NET: Registered protocol family 16
[4294668.333000] EISA bus registered
[4294668.333000] ACPI: bus type pci registered
[4294668.334000] PCI: PCI BIOS revision 2.10 entry at 0xfa134, last bus=1
[4294668.334000] Setting up standard PCI resources
[4294668.340000] ACPI: Subsystem revision 20060127
[4294668.343000] ACPI: Interpreter enabled
[4294668.343000] ACPI: Using PIC for interrupt routing
[4294668.344000] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15)
[4294668.345000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15)
[4294668.346000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 15)
[4294668.346000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15)
[4294668.346000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.346000] PCI: Probing PCI hardware (bus 00)
[4294668.347000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.349000] PCI quirk: region ee00-ee7f claimed by ICH4 ACPI/GPIO/TCO
[4294668.349000] PCI quirk: region ee80-eebf claimed by ICH4 GPIO
[4294668.350000] Boot video device is 0000:01:0b.0
[4294668.350000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.350000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.356000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.356000] pnp: PnP ACPI init
[4294668.362000] pnp: PnP ACPI: found 14 devices
[4294668.362000] PnPBIOS: Disabled by ACPI PNP
[4294668.363000] SCSI subsystem initialized
[4294668.363000] usbcore: registered new driver usbfs
[4294668.363000] usbcore: registered new driver hub
[4294668.363000] PCI: Using ACPI for IRQ routing
[4294668.363000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.387000] TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
[4294668.389000] pnp: 00:02: ioport range 0x3f7-0x3f7 has been reserved
[4294668.389000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[4294668.389000] pnp: 00:02: ioport range 0x400-0x47f has been reserved
[4294668.389000] PCI: Bridge: 0000:00:1e.0
[4294668.389000] IO window: 1000-1fff
[4294668.389000] MEM window: 40000000-411fffff
[4294668.389000] PREFETCH window: 48000000-4fffffff
[4294668.389000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.389000] NET: Registered protocol family 2
[4294668.399000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294668.399000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[4294668.399000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[4294668.400000] TCP: Hash tables configured (established 16384 bind 8192)
[4294668.400000] TCP reno registered
[4294668.400000] Machine check exception polling timer started.
[4294668.409000] audit: initializing netlink socket (disabled)
[4294668.409000] audit(1156863959.408:1): initialized
[4294668.410000] Total HugeTLB memory allocated, 0
[4294668.410000] VFS: Disk quotas dquot_6.5.1
[4294668.410000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.410000] Loading Reiser4. See http://www.namesys.com for a description of Reiser4.
[4294668.410000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[4294668.410000] Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
[4294668.411000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[4294668.411000] NTFS driver 2.1.27 [Flags: R/W].
[4294668.411000] QNX4 filesystem 0.2.3 registered.
[4294668.411000] fuse init (API version 7.6)
[4294668.412000] JFS: nTxBlock = 2966, nTxLock = 23732
[4294668.416000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[4294668.417000] SGI XFS Quota Management subsystem
[4294668.417000] SELinux: Registering netfilter hooks
[4294668.423000] Initializing Cryptographic API
[4294668.423000] io scheduler noop registered
[4294668.423000] io scheduler anticipatory registered (default)
[4294668.423000] io scheduler deadline registered
[4294668.423000] io scheduler cfq registered
[4294668.491000] lp: driver loaded but no devices found
[4294668.491000] Real Time Clock Driver v1.12ac
[4294668.492000] toshiba: not a supported Toshiba laptop
[4294668.503000] ppdev: user-space parallel port driver
[4294668.503000] Linux agpgart interface v0.101 (c) Dave Jones
[4294668.503000] vesafb: framebuffer at 0x48000000, mapped to 0xd8a00000, using 3072k, total 65536k
[4294668.503000] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[4294668.503000] vesafb: protected mode interface info at c000:e4e0
[4294668.503000] vesafb: scrolling: redraw
[4294668.503000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[4294668.553000] Console: switching to colour frame buffer device 128x48
[4294668.557000] fbsplash: console 0 using theme 'default'
[4294669.079000] fbsplash: switched splash state to 'on' on console 0
[4294669.079000] fb0: VESA VGA frame buffer device
[4294669.080000] ACPI: Power Button (FF) [PWRF]
[4294669.080000] ACPI: Power Button (CM) [PBTN]
[4294669.080000] Using specific hotkey driver
[4294669.082000] ibm_acpi: ec object not found
[4294669.082000] isapnp: Scanning for PnP cards...
[4294669.394000] isapnp: No Plug & Play device found
[4294669.394000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[4294669.395000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.396000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.397000] PCI: Enabling device 0000:01:09.0 (0000 -> 0001)
[4294669.397000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[4294669.397000] PCI: setting IRQ 5 as level-triggered
[4294669.397000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294669.404000] pnp: Device 00:09 activated.
[4294669.404000] parport: PnPBIOS parport detected.
[4294669.404000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294669.487000] lp0: using parport0 (interrupt-driven).
[4294669.487000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[4294669.489000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.490000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.490000] parport0: cannot grant exclusive access for device parkbd
[4294669.490000] mice: PS/2 mouse device common for all mice
[4294669.490000] ts: Compaq touchscreen protocol output
[4294669.490000] Floppy drive(s): fd0 is 1.44M
[4294669.505000] FDC 0 is a post-1991 82077
[4294669.507000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[4294669.513000] loop: loaded (max 64 devices)
[4294669.513000] Compaq SMART2 Driver (v 2.6.0)
[4294669.514000] HP CISS Driver (v 2.6.10)
[4294669.514000] v2.3 : Micro Memory(tm) PCI memory board block driver
[4294669.514000] MM: desc_per_page = 128
[4294669.524000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294669.524000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.524000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.525000] ICH: IDE controller at PCI slot 0000:00:1f.1
[4294669.525000] ICH: chipset revision 2
[4294669.525000] ICH: not 100% native mode: will probe irqs later
[4294669.525000] ide0: BM-DMA at 0x2020-0x2027, BIOS settings: hda:DMA, hdb:pio
[4294669.525000] ide1: BM-DMA at 0x2028-0x202f, BIOS settings: hdc:pio, hdd:DMA
[4294669.525000] Probing IDE interface ide0...
[4294669.789000] hda: Maxtor 4D040H2, ATA DISK drive
[4294670.153000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
[4294670.401000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294670.401000] Probing IDE interface ide1...
[4294671.328000] hdd: CDD4801 CD-R/RW, ATAPI CD/DVD-ROM drive
[4294671.379000] ide1 at 0x170-0x177,0x376 on irq 15
[4294671.381000] hda: max request size: 128KiB
[4294671.383000] hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[4294671.383000] hda: cache flushes not supported
[4294671.383000] hda: hda1
[4294671.395000] hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
[4294671.395000] Uniform CD-ROM driver Revision: 3.20
[4294671.403000] iscsi: registered transport (tcp)
[4294671.404000] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[4294671.404000] Detecting Adaptec I2O RAID controllers...
[4294671.404000] Adaptec aacraid driver (1.1-5[2409]-mh1)
[4294671.405000] NCR53c406a: no available ports found
[4294671.405000] sym53c416.c: Version 1.0.0-ac
[4294671.405000] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[4294671.405000] Emulex LightPulse Fibre Channel SCSI driver 8.1.6
[4294671.405000] Copyright(c) 2004-2006 Emulex. All rights reserved.
[4294671.427000] Failed initialization of WD-7000 SCSI card!
[4294671.427000] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
[4294671.427000] megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
[4294671.427000] megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
[4294671.427000] GDT-HA: Storage RAID Controller Driver. Version: 3.04
[4294671.427000] GDT-HA: Found 0 PCI Storage RAID Controllers
[4294671.427000] 3ware Storage Controller device driver for Linux v1.26.02.001.
[4294671.427000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[4294671.427000] nsp32: loading...
[4294671.427000] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[4294671.428000] libata version 1.20 loaded.
[4294671.429000] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[4294671.429000] osst :I: Tape driver with OnStream support version 0.99.4
[4294671.429000] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[4294671.429000] I2O subsystem v1.325
[4294671.429000] i2o: max drivers = 8
[4294671.429000] I2O Configuration OSM v1.323
[4294671.429000] I2O Bus Adapter OSM v1.317
[4294671.430000] I2O Block Device OSM v1.325
[4294671.430000] I2O SCSI Peripheral OSM v1.316
[4294671.430000] I2O ProcFS OSM v1.316
[4294671.430000] Fusion MPT base driver 3.03.09
[4294671.430000] Copyright (c) 1999-2005 LSI Logic Corporation
[4294671.430000] Fusion MPT SPI Host driver 3.03.09
[4294671.430000] Fusion MPT FC Host driver 3.03.09
[4294671.430000] Fusion MPT SAS Host driver 3.03.09
[4294671.430000] Fusion MPT misc device (ioctl) driver 3.03.09
[4294671.430000] mptctl: Registered with Fusion MPT base driver
[4294671.430000] mptctl: /dev/mptctl @ (major,minor=10,220)
[4294671.430000] Fusion MPT LAN driver 3.03.09
[4294671.430000] ieee1394: Initialized config rom entry `ip1394'
[4294671.430000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294671.430000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294671.431000] usbmon: debugfs is not available
[4294671.431000] usbcore: registered new driver usblp
[4294671.431000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[4294671.431000] Initializing USB Mass Storage driver...
[4294671.431000] usbcore: registered new driver usb-storage
[4294671.431000] USB Mass Storage support registered.
[4294671.431000] usbcore: registered new driver libusual
[4294671.431000] usbcore: registered new driver hiddev
[4294671.431000] usbcore: registered new driver usbhid
[4294671.431000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294671.431000] md: linear personality registered for level -1
[4294671.431000] md: raid0 personality registered for level 0
[4294671.431000] md: raid1 personality registered for level 1
[4294671.431000] md: raid10 personality registered for level 10
[4294671.431000] md: raid5 personality registered for level 5
[4294671.431000] md: raid4 personality registered for level 4
[4294671.431000] raid5: automatically using best checksumming function: pIII_sse
[4294671.436000] pIII_sse : 1916.000 MB/sec
[4294671.436000] raid5: using function: pIII_sse (1916.000 MB/sec)
[4294671.453000] raid6: int32x1 285 MB/s
[4294671.470000] raid6: int32x2 324 MB/s
[4294671.487000] raid6: int32x4 269 MB/s
[4294671.504000] raid6: int32x8 250 MB/s
[4294671.521000] raid6: mmxx1 828 MB/s
[4294671.538000] raid6: mmxx2 949 MB/s
[4294671.555000] raid6: sse1x1 761 MB/s
[4294671.572000] raid6: sse1x2 984 MB/s
[4294671.572000] raid6: using algorithm sse1x2 (984 MB/s)
[4294671.572000] md: raid6 personality registered for level 6
[4294671.572000] md: multipath personality registered for level -4
[4294671.572000] md: faulty personality registered for level -5
[4294671.572000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294671.572000] md: bitmap version 4.39
[4294671.572000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[4294671.572000] EISA: Probing bus 0 at eisa.0
[4294671.573000] Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
[4294671.573000] specify port
[4294671.573000] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[4294671.574000] ALSA device list:
[4294671.574000] No soundcards found.
[4294671.574000] TCP bic registered
[4294671.574000] NET: Registered protocol family 1
[4294671.574000] NET: Registered protocol family 17
[4294671.574000] Using IPI No-Shortcut mode
[4294671.574000] ACPI wakeup devices:
[4294671.574000] PBTN PCI0 USB0 BUS1
[4294671.574000] ACPI: (supports S0 S1 S5)
[4294671.574000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[4294671.576000] Freeing unused kernel memory: 480k freed
[4294672.234000] USB Universal Host Controller Interface driver v3.0
[4294672.235000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294672.235000] PCI: setting IRQ 11 as level-triggered
[4294672.235000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294672.235000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294672.235000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[4294672.235000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[4294672.235000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000eec0
[4294672.236000] usb usb1: configuration #1 chosen from 1 choice
[4294672.236000] hub 1-0:1.0: USB hub found
[4294672.236000] hub 1-0:1.0: 2 ports detected
[4294672.392000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294672.455000] sl811: driver sl811-hcd, 19 May 2005
[4294672.543000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[4294672.683000] usb 1-1: configuration #1 chosen from 1 choice
[4294672.686000] hub 1-1:1.0: USB hub found
[4294672.689000] hub 1-1:1.0: 4 ports detected
[4294672.973000] usb 1-1.2: new full speed USB device using uhci_hcd and address 3
[4294673.088000] usb 1-1.2: configuration #1 chosen from 1 choice
[4294673.091000] scsi2 : SCSI emulation for USB Mass Storage devices
[4294673.091000] usb-storage: device found at 3
[4294673.091000] usb-storage: waiting for device to settle before scanning
[4294678.732000] Vendor: ST380011 Model: A Rev: 8.01
[4294678.732000] Type: Direct-Access ANSI SCSI revision: 00
[4294678.736000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294678.741000] sda: Write Protect is off
[4294678.741000] sda: Mode Sense: 10 00 00 00
[4294678.742000] sda: assuming drive cache: write through
[4294678.746000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294678.751000] sda: Write Protect is off
[4294678.751000] sda: Mode Sense: 10 00 00 00
[4294678.751000] sda: assuming drive cache: write through
[4294678.752000] sda: sda1 < sda5 sda6 >
[4294678.798000] sd 2:0:0:0: Attached scsi disk sda
[4294678.798000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[4294678.799000] usb-storage: device scan complete
[4294704.013000] attempt to access beyond end of device
[4294704.013000] sda1: rw=0, want=66, limit=2
[4294704.013000] isofs_fill_super: bread failed, dev=sda1, iso_blknum=16, block=32
[4294704.789000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294704.803000] Unable to load NLS charset iso8859-1
[4294704.816000] Unable to load NLS charset iso8859-1
[4294705.437000] ISO 9660 Extensions: RRIP_1991A
[4294765.379000] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 890kHz
[4294768.405000] 8139too Fast Ethernet driver 0.9.27
[4294768.405000] PCI: Enabling device 0000:01:0a.0 (0004 -> 0007)
[4294768.406000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294768.406000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294768.406000] eth0: RealTek RTL8139 at 0xd8d14000, 00:10:b5:d3:be:92, IRQ 11
[4294768.406000] eth0: Identified 8139 chip type 'RTL-8139B'
[4294769.685000] nvidia: module license 'NVIDIA' taints kernel.
[4294769.705000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294769.706000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[4294769.972000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294773.265000] i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
[4294773.272000] agpgart: Detected an Intel i810 E Chipset.
[4294773.277000] agpgart: detected 4MB dedicated video ram.
[4294773.311000] agpgart: AGP aperture is 64M @ 0x44000000
[4294773.519000] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[4294775.896000] i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
[4294829.270000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294930.679000] fbsplash: console 1 using theme 'default'
[4294930.726000] fbsplash: switched splash state to 'on' on console 1
[4294930.754000] fbsplash: console 2 using theme 'default'
[4294930.764000] fbsplash: switched splash state to 'on' on console 2
[4294930.780000] fbsplash: console 3 using theme 'default'
[4294930.790000] fbsplash: switched splash state to 'on' on console 3
[4294930.802000] fbsplash: console 4 using theme 'default'
[4294931.056000] fbsplash: switched splash state to 'on' on console 4
[4294931.276000] fbsplash: console 5 using theme 'default'
[4294931.286000] fbsplash: switched splash state to 'on' on console 5
[4294931.295000] fbsplash: console 11 using theme 'default'
[4294931.305000] fbsplash: switched splash state to 'on' on console 11
[4294943.669000] Bluetooth: Core ver 2.8
[4294943.670000] NET: Registered protocol family 31
[4294943.670000] Bluetooth: HCI device and connection manager initialized
[4294943.670000] Bluetooth: HCI socket layer initialized
[4294944.337000] Bluetooth: L2CAP ver 2.8
[4294944.337000] Bluetooth: L2CAP socket layer initialized
[4294945.272000] Bluetooth: RFCOMM socket layer initialized
[4294945.272000] Bluetooth: RFCOMM TTY layer initialized
[4294945.272000] Bluetooth: RFCOMM ver 1.7
[4294977.243000] NET: Registered protocol family 10
[4294977.243000] lo: Disabled Privacy Extensions
[4294977.243000] IPv6 over IPv4 tunneling driver
[4294987.344000] eth0: no IPv6 routers present
[4295468.863000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4295468.990000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4295505.656000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4295509.786000] kjournald starting. Commit interval 5 seconds
[4295509.787000] EXT3-fs: mounted filesystem with ordered data mode.
[4295510.361000] kjournald starting. Commit interval 5 seconds
[4295510.364000] EXT3 FS on sda5, internal journal
[4295510.365000] EXT3-fs: mounted filesystem with ordered data mode.
[4295567.120000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4295567.246000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4295588.335000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4295591.377000] kjournald starting. Commit interval 5 seconds
[4295591.378000] EXT3-fs: mounted filesystem with ordered data mode.
[4296058.399000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4296058.526000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4296088.142000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4296091.293000] kjournald starting. Commit interval 5 seconds
[4296091.293000] EXT3-fs: mounted filesystem with ordered data mode.
[4297107.504000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4297107.632000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4297119.928000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4297123.017000] kjournald starting. Commit interval 5 seconds
[4297123.017000] EXT3-fs: mounted filesystem with ordered data mode.
[4297164.018000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4297164.145000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4297174.824000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4297177.906000] kjournald starting. Commit interval 5 seconds
[4297177.906000] EXT3-fs: mounted filesystem with ordered data mode.
[4306341.799000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4306341.926000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4306387.921000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4306391.960000] kjournald starting. Commit interval 5 seconds
[4306391.961000] EXT3-fs: mounted filesystem with ordered data mode.
[4306643.144000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4306643.281000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4306659.470000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4306662.489000] kjournald starting. Commit interval 5 seconds
[4306662.490000] EXT3-fs: mounted filesystem with ordered data mode.
[4307051.543000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4307051.671000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4307062.939000] program python is using a deprecated SCSI ioctl, please convert it to SG_IO
[4307066.127000] kjournald starting. Commit interval 5 seconds
[4307066.128000] EXT3-fs: mounted filesystem with ordered data mode.
sabayonuser@sabayonx86 ~ $

by **slayer** » Wed Aug 30, 2006 0:47

hay i was reading down the code I dont know what all of it means but I saw where it said [4294673.091000] usb-storage: waiting for device to settle before scanning so i unpluged my external hard drive im past the error im at begin installion yaaaa
ill post back and let you know (thanks)

by **cvill64** » Wed Aug 30, 2006 1:58

lol, a simple little thing to look at can be a big help, hope it works for you

Also, the command is lspci, sorry, that's my highest spelling mistake in this forum

by **slayer** » Wed Aug 30, 2006 2:39

Yesssssssssssssssssssss it did work
this is so cool
a friend is up for a new computer he does'nt know windows, all he wants is something that is secure from viruses he is looking at apple but there high dollar.
system76 has ubuntu on their computers
he wants to look at linux this is what im goning to show him.
this is slick yes thank you for making this I tried gentoo about 5years ago I got it to install tried for a week to configure it befor I gave up
Im as new as you can get thanks
im liking this

by **cvill64** » Wed Aug 30, 2006 4:08

kick ass! Can't wait to get another convert....I mean...user..yes...user only

Have fun sabayoning!

Sabayon Community

help live cd install (anaconda) [SOLVED]

help live cd install (anaconda) [SOLVED]

Who is online