No direct rendering&XGL unnaturally slow on ATI

[Woodgypsy]

I recently installed Sabayon3.4 32bit and I think something is going wrong with my install. When I am not using XGL, it appears that direct rendering is not working, as .avi files play very sluggish and even moving around open windows is sluggish. Even though it says it is working, and fglrx seems to be working.

glxinfo | grep -i direct
direct rendering: Yes

fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 PRO
OpenGL version string: 2.0.6474 (8.38.6)

Also, when I enable XGL, KDE becomes unnaturally slow, to the point it is not usable at all. Even typing root password for starting accel-manager (to turn off XGL again) takes several minutes. Compiz-fusion does load on startup with XGL unlike others with ATI, but still there's no window decorations. Here's my lspci. Dmesg and xorg.log coming in next posts. I did post this on 3D part, but I am posting here again as I seem to have non-3D problem as well. Thanks for the help.

lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0a.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:0e.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 ND [Radeon 9700 Pro]
01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary)

[Woodgypsy]

here's my dmesg

dmesg
.337659] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.PATA.CHN1._STA] (Node dfc06c20), AE_NOT_FOUND
[ 49.340721] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 49.340725] PCI: Probing PCI hardware (bus 00)
[ 49.340737] Device driver pci0000:00 lacks bus and class support for being resumed.
[ 49.341398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 49.368861] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 *12)
[ 49.368988] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 49.369119] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 49.369233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 49.369342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 49.369456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0
[ 49.369563] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 49.369670] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 49.369790] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 49.369912] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 49.370053] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 49.370174] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 49.370246] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 49.370259] pnp: PnP ACPI init
[ 49.370266] Device driver pnp0 lacks bus and class support for being resumed.
[ 49.370268] ACPI: bus type pnp registered
[ 49.370827] ACPI Error (psargs-0355): [ATFL] Namespace lookup failure, AE_NOT_FOUND
[ 49.370832] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.PATA.CHN1._STA] (Node dfc06c20), AE_NOT_FOUND
[ 49.372457] pnp: PnP ACPI: found 9 devices
[ 49.372459] ACPI: ACPI bus type pnp unregistered
[ 49.372567] SCSI subsystem initialized
[ 49.372588] libata version 2.21 loaded.
[ 49.372656] usbcore: registered new interface driver usbfs
[ 49.372658] USB driver usbfs lacks resume support.
[ 49.372688] usbcore: registered new interface driver hub
[ 49.372718] usbcore: registered new device driver usb
[ 49.372745] PCI: Using ACPI for IRQ routing
[ 49.372748] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 49.390564] NetLabel: Initializing
[ 49.390566] NetLabel: domain hash size = 128
[ 49.390568] NetLabel: protocols = UNLABELED CIPSOv4
[ 49.390580] NetLabel: unlabeled traffic allowed by default
[ 49.390795] ACPI: RTC can wake from S4
[ 49.390820] pnp: 00:00: iomem range 0xd0800-0xd3fff has been reserved
[ 49.390823] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 49.390826] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 49.390829] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 49.390834] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
[ 49.390837] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 49.390980] Time: tsc clocksource has been installed.
[ 49.420937] PCI: Bridge: 0000:00:01.0
[ 49.420940] IO window: 9000-9fff
[ 49.420944] MEM window: f8000000-f9ffffff
[ 49.420948] PREFETCH window: e8000000-f7ffffff
[ 49.420962] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 49.420981] NET: Registered protocol family 2
[ 49.430979] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 49.431111] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 49.432283] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 49.432674] TCP: Hash tables configured (established 131072 bind 65536)
[ 49.432677] TCP reno registered
[ 49.435066] checking if image is initramfs... it is
[ 49.681440] audit: initializing netlink socket (disabled)
[ 49.681452] audit(1185757463.434:1): initialized
[ 49.681508] highmem bounce pool size: 64 pages
[ 49.681511] Total HugeTLB memory allocated, 0
[ 49.681559] VFS: Disk quotas dquot_6.5.1
[ 49.681568] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 49.681627] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 49.681629] Registering unionfs 20060916-2203
[ 49.681631] unionfs: debugging is not enabled
[ 49.681652] Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu
[ 49.681866] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 49.682054] NTFS driver 2.1.28 [Flags: R/W].
[ 49.682086] QNX4 filesystem 0.2.3 registered.
[ 49.682089] fuse init (API version 7.
[ 49.682152] JFS: nTxBlock = 8018, nTxLock = 64144
[ 49.685835] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 49.685967] SGI XFS Quota Management subsystem
[ 49.686001] SELinux: Registering netfilter hooks
[ 49.686105] io scheduler noop registered
[ 49.686107] io scheduler anticipatory registered
[ 49.686109] io scheduler deadline registered
[ 49.686127] io scheduler cfq registered (default)
[ 49.686138] PCI: VIA PCI bridge detected. Disabling DAC.
[ 49.686202] Boot video device is 0000:01:00.0
[ 49.709708] lp: driver loaded but no devices found
[ 49.709791] Real Time Clock Driver v1.12ac
[ 49.713450] ppdev: user-space parallel port driver
[ 49.713453] Linux agpgart interface v0.102 (c) Dave Jones
[ 49.713495] agpgart: Detected AGP bridge 0
[ 49.717383] agpgart: AGP aperture is 128M @ 0xe0000000
[ 49.717473] vesafb: framebuffer at 0xe8000000, mapped to 0xf8d00000, using 3072k, total 131072k
[ 49.717476] vesafb: mode is 1024x768x16, linelength=2048, pages=84
[ 49.717479] vesafb: protected mode interface info at c000:58c8
[ 49.717482] vesafb: pmi: set display start = c00c595c, set palette = c00c59a8
[ 49.717483] vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
[ 49.717489] vesafb: scrolling: redraw
[ 49.717492] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 49.759120] Console: switching to colour frame buffer device 128x48
[ 49.798908] fbsplash: console 0 using theme 'sabayon'
[ 49.971120] fbsplash: switched splash state to 'on' on console 0
[ 49.971402] fb0: VESA VGA frame buffer device
[ 49.971569] input: Power Button (FF) as /class/input/input0
[ 49.971574] ACPI: Power Button (FF) [PWRF]
[ 49.971634] input: Power Button (CM) as /class/input/input1
[ 49.971637] ACPI: Power Button (CM) [PWRB]
[ 49.971686] ACPI: Fan [FAN] (on)
[ 49.972218] ACPI Error (psargs-0355): [ATFL] Namespace lookup failure, AE_NOT_FOUND
[ 49.972224] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.PATA.CHN1._STA] (Node dfc06c20), AE_NOT_FOUND
[ 49.974404] ACPI: Thermal Zone [THRM] (42 C)
[ 49.974463] ibm_acpi: ec object not found
[ 49.974469] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 49.975163] PCI driver parport_pc lacks driver specific resume support.
[ 49.975204] Floppy drive(s): fd0 is 1.44M
[ 52.982454] floppy0: no floppy controllers found
[ 52.982870] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 52.983074] loop: module loaded
[ 52.983076] Compaq SMART2 Driver (v 2.6.0)
[ 52.983109] PCI driver cpqarray lacks driver specific resume support.
[ 52.983112] HP CISS Driver (v 3.6.14)
[ 52.983141] PCI driver cciss lacks driver specific resume support.
[ 52.983166] PCI driver DAC960 lacks driver specific resume support.
[ 52.983243] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 52.983274] PCI driver umem lacks driver specific resume support.
[ 52.983277] MM: desc_per_page = 128
[ 52.983318] Device driver lo lacks bus and class support for being resumed.
[ 52.983365] PCI driver hp100 lacks driver specific resume support.
[ 52.983423] input: Macintosh mouse button emulation as /class/input/input2
[ 52.983446] Loading iSCSI transport class v2.0-724.
[ 52.983527] iscsi: registered transport (tcp)
[ 52.983600] PCI driver arcmsr lacks driver specific resume support.
[ 52.983643] PCI driver aic7xxx lacks driver specific resume support.
[ 52.983690] PCI driver aic79xx lacks driver specific resume support.
[ 52.983692] Adaptec aacraid driver (1.1-5[2437]-mh4)
[ 52.983724] PCI driver aacraid lacks driver specific resume support.
[ 52.983857] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 52.983909] PCI driver aic94xx lacks driver specific resume support.
[ 52.983936] PCI driver ips lacks driver specific resume support.
[ 52.983982] PCI driver qla1280 lacks driver specific resume support.
[ 52.983999] QLogic Fibre Channel HBA Driver
[ 52.984036] PCI driver qla2xxx lacks driver specific resume support.
[ 52.984072] iscsi: registered transport (qla4xxx)
[ 52.984101] PCI driver qla4xxx lacks driver specific resume support.
[ 52.984103] QLogic iSCSI HBA Driver
[ 52.984105] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[ 52.984107] Copyright(c) 2004-2007 Emulex. All rights reserved.
[ 52.984139] PCI driver lpfc lacks driver specific resume support.
[ 52.984165] PCI driver dmx3191d lacks driver specific resume support.
[ 52.984195] PCI driver sym53c8xx lacks driver specific resume support.
[ 52.984227] PCI driver dc395x lacks driver specific resume support.
[ 52.984230] DC390: clustering now enabled by default. If you get problems load
[ 52.984231] with "disable_clustering=1" and report to maintainers
[ 52.984262] PCI driver tmscsim lacks driver specific resume support.
[ 52.984295] PCI driver megaraid_legacy lacks driver specific resume support.
[ 52.984298] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 52.984302] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 52.984331] PCI driver megaraid lacks driver specific resume support.
[ 52.984333] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 52.984365] PCI driver megaraid_sas lacks driver specific resume support.
[ 52.984393] PCI driver atp870u lacks driver specific resume support.
[ 52.984396] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 52.984445] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 52.984476] PCI driver inia100 lacks driver specific resume support.
[ 52.984479] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 52.984506] PCI driver 3w-xxxx lacks driver specific resume support.
[ 52.984509] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 52.984536] PCI driver 3w-9xxx lacks driver specific resume support.
[ 52.984539] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 52.984573] PCI driver ipr lacks driver specific resume support.
[ 52.984575] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 52.984601] PCI driver hptiop lacks driver specific resume support.
[ 52.984604] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 52.984630] PCI driver stex lacks driver specific resume support.
[ 52.984633] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 52.984663] osst :I: Tape driver with OnStream support version 0.99.4
[ 52.984664] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 52.984804] PCI driver sata_svw lacks driver specific resume support.
[ 52.984861] PCI driver sata_promise lacks driver specific resume support.
[ 52.984888] PCI driver sata_qstor lacks driver specific resume support.
[ 52.984966] sata_via 0000:00:0f.0: version 2.2
[ 52.985212] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 52.985215] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 52.985222] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 52.985262] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 52.985323] scsi0 : sata_via
[ 52.985335] Device driver host0 lacks bus and class support for being resumed.
[ 52.985385] scsi1 : sata_via
[ 52.985395] Device driver host1 lacks bus and class support for being resumed.
[ 52.985427] ata1: SATA max UDMA/133 cmd 0x0001a400 ctl 0x0001a802 bmdma 0x0001b400 irq 16
[ 52.985431] ata2: SATA max UDMA/133 cmd 0x0001ac00 ctl 0x0001b002 bmdma 0x0001b408 irq 16
[ 53.186253] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 53.362195] ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
[ 53.362198] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (not used)
[ 53.369202] ata1.00: configured for UDMA/133
[ 53.569875] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 53.580463] Device driver target0:0:0 lacks bus and class support for being resumed.
[ 53.580538] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
[ 53.580617] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 53.580628] sd 0:0:0:0: [sda] Write Protect is off
[ 53.580630] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 53.580643] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.580682] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 53.580689] sd 0:0:0:0: [sda] Write Protect is off
[ 53.580692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 53.580703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.580706] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 53.624857] sd 0:0:0:0: [sda] Attached SCSI disk
[ 53.624907] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 53.624964] PCI driver sata_vsc lacks driver specific resume support.
[ 53.624991] PCI driver sata_sis lacks driver specific resume support.
[ 53.625017] PCI driver sata_sx4 lacks driver specific resume support.
[ 53.625071] PCI driver sata_uli lacks driver specific resume support.
[ 53.625100] PCI driver sata_mv lacks driver specific resume support.
[ 53.625150] PCI driver pdc_adma lacks driver specific resume support.
[ 53.625229] PCI driver pata_artop lacks driver specific resume support.
[ 53.625453] PCI driver pata_hpt37x lacks driver specific resume support.
[ 53.625481] PCI driver pata_hpt3x2n lacks driver specific resume support.
[ 53.625793] PCI driver pata_pdc2027x lacks driver specific resume support.
[ 53.625984] pata_via 0000:00:0f.1: version 0.3.1
[ 53.626009] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 53.626096] scsi2 : pata_via
[ 53.626105] Device driver host2 lacks bus and class support for being resumed.
[ 53.626147] scsi3 : pata_via
[ 53.626153] Device driver host3 lacks bus and class support for being resumed.
[ 53.626188] ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bc00 irq 14
[ 53.626191] ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bc08 irq 15
[ 54.100574] ata3.00: ATAPI: 24X10, P.MJ, max MWDMA2
[ 54.100578] ata3.01: ATAPI: HITACHI DVD-ROM GD-7500, 0006, max UDMA/33
[ 54.257421] ata3.00: configured for MWDMA2
[ 54.430220] ata3.01: configured for UDMA/33
[ 54.592000] Device driver target2:0:0 lacks bus and class support for being resumed.
[ 54.592387] scsi 2:0:0:0: CD-ROM ATAPI CD-R/RW 24X10 P.MJ PQ: 0 ANSI: 5
[ 54.596589] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 54.596592] Uniform CD-ROM driver Revision: 3.20
[ 54.596638] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 54.596685] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 54.596704] Device driver target2:0:1 lacks bus and class support for being resumed.
[ 54.602924] scsi 2:0:1:0: CD-ROM HITACHI DVD-ROM GD-7500 0006 PQ: 0 ANSI: 5
[ 54.622380] sr1: scsi3-mmc drive: 14x/40x cd/rw xa/form2 cdda tray
[ 54.622418] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 54.622463] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 54.622513] PCI driver pata_sl82c105 lacks driver specific resume support.
[ 54.622600] I2O subsystem v1.325
[ 54.622602] i2o: max drivers = 8
[ 54.622676] PCI driver PCI_I2O lacks driver specific resume support.
[ 54.622679] I2O Configuration OSM v1.323
[ 54.622726] I2O Bus Adapter OSM v1.317
[ 54.622745] I2O Block Device OSM v1.325
[ 54.622803] I2O SCSI Peripheral OSM v1.316
[ 54.622822] I2O ProcFS OSM v1.316
[ 54.622847] Fusion MPT base driver 3.04.04
[ 54.622848] Copyright (c) 1999-2007 LSI Logic Corporation
[ 54.622852] Fusion MPT SPI Host driver 3.04.04
[ 54.622891] Fusion MPT FC Host driver 3.04.04
[ 54.622930] Fusion MPT SAS Host driver 3.04.04
[ 54.622966] Fusion MPT misc device (ioctl) driver 3.04.04
[ 54.622994] mptctl: Registered with Fusion MPT base driver
[ 54.622997] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 54.622999] Fusion MPT LAN driver 3.04.04
[ 54.623060] usbcore: registered new interface driver usblp
[ 54.623062] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 54.623065] Initializing USB Mass Storage driver...
[ 54.623090] usbcore: registered new interface driver usb-storage
[ 54.623092] USB Mass Storage support registered.
[ 54.623117] usbcore: registered new interface driver libusual
[ 54.623121] USB driver libusual lacks resume support.
[ 54.623179] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 54.623181] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 54.872681] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 54.876542] parkbd: no such parport
[ 54.876636] PCI driver pcips2 lacks driver specific resume support.
[ 54.876719] mice: PS/2 mouse device common for all mice
[ 54.896535] input: AT Translated Set 2 keyboard as /class/input/input3
[ 54.896728] md: linear personality registered for level -1
[ 54.896731] md: raid0 personality registered for level 0
[ 54.896733] md: raid1 personality registered for level 1
[ 54.896736] md: raid10 personality registered for level 10
[ 54.913568] raid6: int32x1 757 MB/s
[ 54.930607] raid6: int32x2 851 MB/s
[ 54.947564] raid6: int32x4 769 MB/s
[ 54.964527] raid6: int32x8 445 MB/s
[ 54.981501] raid6: mmxx1 1675 MB/s
[ 54.998480] raid6: mmxx2 3003 MB/s
[ 55.015462] raid6: sse1x1 1507 MB/s
[ 55.032439] raid6: sse1x2 2617 MB/s
[ 55.049440] raid6: sse2x1 2511 MB/s
[ 55.066407] raid6: sse2x2 3484 MB/s
[ 55.066409] raid6: using algorithm sse2x2 (3484 MB/s)
[ 55.066412] md: raid6 personality registered for level 6
[ 55.066414] md: raid5 personality registered for level 5
[ 55.066416] md: raid4 personality registered for level 4
[ 55.066419] raid5: automatically using best checksumming function: pIII_sse
[ 55.071398] pIII_sse : 6496.000 MB/sec
[ 55.071400] raid5: using function: pIII_sse (6496.000 MB/sec)
[ 55.071402] md: multipath personality registered for level -4
[ 55.071405] md: faulty personality registered for level -5
[ 55.071511] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 55.071621] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 55.071656] usbcore: registered new interface driver hiddev
[ 55.071658] USB driver hiddev lacks resume support.
[ 55.071681] usbcore: registered new interface driver usbhid
[ 55.071684] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 55.071709] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 55.071742] ALSA device list:
[ 55.071744] No soundcards found.
[ 55.071813] TCP bic registered
[ 55.071822] NET: Registered protocol family 1
[ 55.071825] NET: Registered protocol family 17
[ 55.071888] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
[ 55.071919] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2
[ 55.071922] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6
[ 55.071924] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0xa
[ 55.071967] Using IPI No-Shortcut mode
[ 55.071968] Suspend v2.2.10
[ 55.072004] Suspend2 Checksumming support registered.
[ 55.072026] Suspend2 Userspace Storage Manager support registered.
[ 55.072047] Suspend2 Basic User Interface support registered.
[ 55.072068] Suspend2 Compressor support registered.
[ 55.072088] Suspend2 Block I/O support registered.
[ 55.072111] Suspend2 Swap Allocator support registered.
[ 55.072132] Suspend2 File Allocator support registered.
[ 55.072136] Suspend2 Userspace UI support registered.
[ 55.072245] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 55.181487] ata1: soft resetting port
[ 55.364233] ata1.00: configured for UDMA/133
[ 55.364236] ata1: EH complete
[ 55.364265] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 55.364274] sd 0:0:0:0: [sda] Write Protect is off
[ 55.364277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 55.364288] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 55.463376] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 55.463381] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 55.463388] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 55.463399] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 55.463461] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 55.463507] ehci_hcd 0000:00:10.4: irq 17, io mem 0xfb102000
[ 55.463514] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 55.463637] Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
[ 55.463644] usb usb1: configuration #1 chosen from 1 choice
[ 55.463681] hub 1-0:1.0: USB hub found
[ 55.463688] hub 1-0:1.0: 8 ports detected
[ 55.563949] Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
[ 55.589618] USB Universal Host Controller Interface driver v3.0
[ 55.589708] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 55.589718] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 55.589767] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 55.589791] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000c000
[ 55.589927] Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
[ 55.589934] usb usb2: configuration #1 chosen from 1 choice
[ 55.589970] hub 2-0:1.0: USB hub found
[ 55.589978] hub 2-0:1.0: 2 ports detected
[ 55.690819] Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
[ 55.690873] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 55.690879] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 55.690917] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 55.690934] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000c400
[ 55.691027] Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
[ 55.691033] usb usb3: configuration #1 chosen from 1 choice
[ 55.691063] hub 3-0:1.0: USB hub found
[ 55.691068] hub 3-0:1.0: 2 ports detected
[ 55.791723] Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
[ 55.791774] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 55.791780] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 55.791813] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 55.791830] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000c800
[ 55.791924] Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
[ 55.791931] usb usb4: configuration #1 chosen from 1 choice
[ 55.791961] hub 4-0:1.0: USB hub found
[ 55.791966] hub 4-0:1.0: 2 ports detected
[ 55.892619] Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
[ 55.892672] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 55.892678] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 55.892713] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 55.892730] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000cc00
[ 55.892822] Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.
[ 55.892828] usb usb5: configuration #1 chosen from 1 choice
[ 55.892861] hub 5-0:1.0: USB hub found
[ 55.892868] hub 5-0:1.0: 2 ports detected
[ 55.993520] Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.
[ 56.062989] sl811: driver sl811-hcd, 19 May 2005
[ 56.130378] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 56.162666] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[ 56.162670] Copyright (c) 1999-2006 Intel Corporation.
[ 56.294232] Device driver usbdev2.2_ep00 lacks bus and class support for being resumed.
[ 56.294242] usb 2-1: configuration #1 chosen from 1 choice
[ 56.311270] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
[ 56.311347] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1
[ 56.311382] Device driver usbdev2.2_ep81 lacks bus and class support for being resumed.
[ 56.516978] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 56.664822] Device driver usbdev2.3_ep00 lacks bus and class support for being resumed.
[ 56.664828] usb 2-2: configuration #1 chosen from 1 choice
[ 56.667823] Device driver usbdev2.3_ep81 lacks bus and class support for being resumed.
[ 56.667855] Device driver usbdev2.3_ep82 lacks bus and class support for being resumed.
[ 56.667888] Device driver usbdev2.3_ep83 lacks bus and class support for being resumed.
[ 57.313230] No storage allocator is currently active. Rechecking whether we can use one.
[ 57.313235] Suspend2: Resume2 parameter is empty. Suspending will be disabled.
[ 57.313240] Compression Driver: Argh! Nothing follows me in the pipeline!
[ 57.313242] Compressor didn't initialise okay.
[ 57.313244] Suspend2: Initialise modules failed!
[ 57.417217] kjournald starting. Commit interval 5 seconds
[ 57.417225] EXT3-fs: sda6: orphan cleanup on readonly fs
[ 57.436709] ext3_orphan_cleanup: deleting unreferenced inode 3934815
[ 57.436729] EXT3-fs: sda6: 1 orphan inode deleted
[ 57.436731] EXT3-fs: recovery complete.
[ 57.439094] EXT3-fs: mounted filesystem with ordered data mode.
[ 61.094856] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 61.094865] 3c59x: Donald Becker and others.
[ 61.094870] 0000:00:0e.0: 3Com PCI 3c905C Tornado at f8cfe000.
[ 61.166045] Device driver eth0 lacks bus and class support for being resumed.
[ 61.173891] PCI driver k8temp lacks driver specific resume support.
[ 61.209210] input: PC Speaker as /class/input/input5
[ 61.216397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 61.235190] PCI driver shpchp lacks driver specific resume support.
[ 61.235194] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 61.336829] Device driver i2c-0 lacks bus and class support for being resumed.
[ 61.336848] PCI driver vt596_smbus lacks driver specific resume support.
[ 61.372272] Linux video capture interface: v2.00
[ 61.389253] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.48
[ 61.434053] usb 2-2: SN9C103 PC Camera Controller detected (vid:pid 0x0C45:0x608F)
[ 61.480018] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 61.544933] usb 2-2: OV7630 image sensor detected
[ 61.687787] usb 2-2: Initialization succeeded
[ 61.688021] usb 2-2: V4L2 device registered as /dev/video0
[ 61.688024] usb 2-2: Optional device control through 'sysfs' interface disabled
[ 61.688046] usbcore: registered new interface driver sn9c102
[ 61.688049] USB driver sn9c102 lacks resume support.
[ 61.691097] Device driver usbdev2.3_ep84 lacks bus and class support for being resumed.
[ 61.692495] usbcore: registered new interface driver snd-usb-audio
[ 61.692498] USB driver snd-usb-audio lacks resume support.
[ 62.049572] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 62.049588] PCI: Unable to reserve mem region #1:8000000@e8000000 for device 0000:01:00.0
[ 62.049590] radeonfb (0000:01:00.0): cannot request region 0.
[ 62.049595] radeonfb: probe of 0000:01:00.0 failed with error -16
[ 62.057545] gameport: CS46xx Gameport is pci0000:00:0a.0/gameport0, speed 1612kHz
[ 62.057580] Device driver gameport0 lacks bus and class support for being resumed.
[ 62.073755] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 62.075996] [fglrx] Maximum main memory to use for locked dma buffers: 920 MBytes.
[ 62.076011] [fglrx] module loaded - fglrx 8.38.6 [Jun 22 2007] on minor 0
[ 63.437133] EXT3 FS on sda6, internal journal
[ 63.673377] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 63.673381] vboxdrv: Successfully done.
[ 64.093352] kjournald starting. Commit interval 5 seconds
[ 64.093482] EXT3 FS on sda7, internal journal
[ 64.093487] EXT3-fs: mounted filesystem with ordered data mode.
[ 64.168040] Adding 1236964k swap on /dev/disk/by-uuid/3310ed9f-0940-4348-9a67-7f79853216aa. Priority:-1 extents:1 across:1236964k
[ 82.433177] fbsplash: console 1 using theme 'sabayon'
[ 82.439756] fbsplash: switched splash state to 'on' on console 1
[ 82.464585] fbsplash: console 2 using theme 'sabayon'
[ 82.469923] fbsplash: switched splash state to 'on' on console 2
[ 82.486448] fbsplash: console 3 using theme 'sabayon'
[ 82.494941] fbsplash: switched splash state to 'on' on console 3
[ 82.511413] fbsplash: console 4 using theme 'sabayon'
[ 82.519933] fbsplash: switched splash state to 'on' on console 4
[ 82.541127] fbsplash: console 5 using theme 'sabayon'
[ 82.546921] fbsplash: switched splash state to 'on' on console 5
[ 82.556729] fbsplash: console 11 using theme 'sabayon'
[ 82.562038] fbsplash: switched splash state to 'on' on console 11
[ 86.608905] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 86.608911] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 86.608916] [fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset)
[ 86.609184] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 86.609241] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 86.609326] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 86.609372] [fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
[ 86.614766] [fglrx] total GART = 134217728
[ 86.614774] [fglrx] free GART = 118222848
[ 86.614777] [fglrx] max single GART = 118222848
[ 86.614779] [fglrx] total LFB = 134217728
[ 86.614782] [fglrx] free LFB = 90165248
[ 86.614784] [fglrx] max single LFB = 90165248
[ 86.614786] [fglrx] total Inv = 0
[ 86.614788] [fglrx] free Inv = 0
[ 86.614790] [fglrx] max single Inv = 0
[ 86.614792] [fglrx] total TIM = 0
[ 92.314247] eth0: setting half-duplex.
[ 93.212203] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 94.213287] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 95.310361] eth0: setting full-duplex.
[ 292.143193] Marking TSC unstable due to: cpufreq changes.
[ 292.143970] Time: acpi_pm clocksource has been installed.
[ 700.208876] Clocksource tsc unstable (delta = -175394022 ns)

[Woodgypsy]

Finally, /var/log/Xorg.0.log

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux localhost 2.6.22-sabayon #1 SMP Sat Jul 21 11:00:08 UTC 2007 i686
Build Date: 12 June 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 01:04:58 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Main Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "VESA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Mouse2"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/TTF/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/corefonts
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x8194640
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3188 card 17f2,3148 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1013,6003 card 1681,a010 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:0e:0: chip 10b7,9200 card 17f2,4c00 rev 78 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 17f2,3149 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 17f2,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 17f2,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 17f2,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 17f2,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 17f2,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 17f2,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 17f2,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,4e44 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e64 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xf7ffffff (0x10000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700 Pro] rev 0, Mem @ 0xe8000000/27, 0xf9000000/16, I/O @ 0x9000/8
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary) rev 0, Mem @ 0xf0000000/27, 0xf9010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfb102000 - 0xfb1020ff (0x100) MX[B]
[1] -1 0 0xfb100000 - 0xfb10007f (0x80) MX[B]
[2] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[3] -1 0 0xfb101000 - 0xfb101fff (0x1000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[6] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[8] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[9] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[10] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[11] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[B]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[13] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
[14] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
[15] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
[16] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[17] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[18] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[19] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[1] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfb102000 - 0xfb1020ff (0x100) MX[B]
[1] -1 0 0xfb100000 - 0xfb10007f (0x80) MX[B]
[2] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[3] -1 0 0xfb101000 - 0xfb101fff (0x1000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[6] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[8] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[9] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[10] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[11] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[B]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[13] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
[14] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
[15] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
[16] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[17] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[18] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[19] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[1] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfb102000 - 0xfb1020ff (0x100) MX[B]
[5] -1 0 0xfb100000 - 0xfb10007f (0x80) MX[B]
[6] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[7] -1 0 0xfb101000 - 0xfb101fff (0x1000) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[10] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[11] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[16] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[17] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[18] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[19] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[B]
[20] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[21] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
[22] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
[23] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
[24] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[25] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[26] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[27] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "i2c"(II) Module already built-in
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "ddc"(II) Module already built-in
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.99.903, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.99.903, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E44) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfb102000 - 0xfb1020ff (0x100) MX[B]
[5] -1 0 0xfb100000 - 0xfb10007f (0x80) MX[B]
[6] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[7] -1 0 0xfb101000 - 0xfb101fff (0x1000) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[10] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[11] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[16] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[17] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[18] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[19] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[B]
[20] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[21] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
[22] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
[23] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
[24] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[25] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[26] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[27] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81b1658
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfb102000 - 0xfb1020ff (0x100) MX[B]
[5] -1 0 0xfb100000 - 0xfb10007f (0x80) MX[B]
[6] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[7] -1 0 0xfb101000 - 0xfb101fff (0x1000) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[10] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[11] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[19] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[20] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[21] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[B]
[23] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[24] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
[25] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
[26] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
[27] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[28] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[29] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[30] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9700 PRO" (Chipset = 0x4e44)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xf9000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI R300
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R300
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MEL Model: 4696 Serial#: 16843009
(II) fglrx(0): Year: 2004 Week: 46
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.641 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) fglrx(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 69 kHz, PixClock max 110 MHz
(II) fglrx(0): Monitor name: RDT1710S
(II) fglrx(0): Serial No: 4Y002363TJ
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0034ac964601010101
(II) fglrx(0): 2e0e010380221b78ee2ee5a4574a9c25
(II) fglrx(0): 115054bfee80714f8180010101010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300520e1100001e000000fd00384b1f
(II) fglrx(0): 450b000a202020202020000000fc0052
(II) fglrx(0): 445431373130530a20202020000000ff
(II) fglrx(0): 003459303032333633544a0a20200045
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 29 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(++) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf9000000 - 0xf900ffff (0x10000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xfb102000 - 0xfb1020ff (0x100) MX[B]
[7] -1 0 0xfb100000 - 0xfb10007f (0x80) MX[B]
[8] -1 0 0xfb000000 - 0xfb0fffff (0x100000) MX[B]
[9] -1 0 0xfb101000 - 0xfb101fff (0x1000) MX[B]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[11] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[13] -1 0 0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
[14] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[18] 0 0 0x00009000 - 0x000090ff (0x100) IX[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[22] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[23] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[24] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc0f (0x10) IX[B]
[26] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[27] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B]
[28] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
[29] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B]
[30] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B]
[31] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[32] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[33] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7f6b000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.38.6
(II) fglrx(0): Date: Jun 22 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.22-sabayon
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): Interrupt handler installed at IRQ 19.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): [pci] find AGP GART
(II) fglrx(0): [agp] Mode=0x1f000a0b bridge: 0x1106/0x3188
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000b0a
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xe0000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000302)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] texture shared area handle = 0x00008000
(II) fglrx(0): shared FSAAScale=2
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x00701000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "Protocol" "ImPS/2"
(**) Mouse2: Device: "/dev/input/mice"
(**) Mouse2: Protocol: "ImPS/2"
(**) Option "SendCoreEvents"
(**) Mouse2: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse2: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse2: ZAxisMapping: buttons 4 and 5
(**) Mouse2: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 5"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "jp106"
(**) Keyboard1: XkbModel: "jp106"
(**) Option "XkbLayout" "jp"
(**) Keyboard1: XkbLayout: "jp"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse2" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) Mouse2: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9

[mdmarmer]

The fglrx driver often does not work properly on install -- emerge ati-drivers and see if that works.

What card do you have? Motherboard or laptop model?

Mike

[Woodgypsy]

I emerged ati-drivers, however, it didn't help.

I am using Radeon9500pro AGP. I am using BIOS which enabled overclocking, that is why it reads as 9700. Thanks.

[edgevision]

Code: Select all

(EE) AIGLX: reverting to software rendering

Did you disable XGL using the Acceleration Manager? This line in Xorg.0.log is common on XGL-configured displays. Until you run a 3D desktop manager (such as compiz/beryl/compiz fusion) you will get ridiculously slow window drawing (I'm surprised you were even able to launch a video.)

If you don't want to use a 3D desktop manager, use DRI (disable XGL.)

If you want to use a 3D desktop manager, but get very slow performance under ATI, enable Loose Binding.

[Woodgypsy]

Code: Select all

(EE) AIGLX: reverting to software rendering

Did you disable XGL using the Acceleration Manager? This line in Xorg.0.log is common on XGL-configured displays. Until you run a 3D desktop manager (such as compiz/beryl/compiz fusion) you will get ridiculously slow window drawing (I'm surprised you were even able to launch a video.)

If you don't want to use a 3D desktop manager, use DRI (disable XGL.)

If you want to use a 3D desktop manager, but get very slow performance under ATI, enable Loose Binding.

Yes, I did disable XGL - KDE is way too slow for me otherwise. So is it natural then? In DRI, at least its usable...Sadly, I don't know much about ATI in Linux as I was mostly on laptop which had Nvidia. I think I am going to try loose binding, thank you.

[Dark_MaGe]

try adding this

Code: Select all

Option "VideoOverlay" "on"

to your xorg.conf inside "device" section

[Woodgypsy]

It seems to have helped with video playback. Thank you. I guess the overall slowness is ATI problem then - cannot wait to install it on Nvidia laptop.

[edgevision]

I did disable XGL - KDE is way too slow for me otherwise. So is it natural then? In DRI, at least its usable.

That's because under XGL you have to run Compiz Fusion.

Until you run a 3D desktop manager (such as compiz/beryl/compiz fusion) you will get ridiculously slow window drawing.