rt73 c1 (D-Link DWL-G122) doesn't work

[phlo]

How do i get it working?

tried already emerge rt73 but portage seems to try to load an old driver.
I also tried to use the driver from rt2x00 but the Networkmanager is not finding the adapter.
an iwlist wlan0 scan shows my Access-point.
But how do i connect?
I use WPA_PSK

thanks

phlo

[Dark_MaGe]

can you provide us an lsusb ? I'm actually using a rt73 card and here it works out of the box with the inkernel drivers, so I think you've messed something...btw are you using knetworkmanager to connect?????????

[phlo]

Oh sorry for the poor informations.
Now some more details.

I am useing SabayonLinux 3.4 loop2b.
localhost ~ # lsusb
Bus 001 Device 003: ID 07d1:3c03 D-Link System

ok I messd something up on my desktop.
Now I tried it again on my laptop (also SL 3.4 loop2b)
when I int plug the usb then the link led is on and I can see it on the knetworkmanager. But I can't connect to my hotspot. I am useing wpa and it also shows as wpa, but its not connecting to it.

any suggestions how i can get some more informations (debug) why its not working? /var/log/messages is not showing much.


5 (Device Configure) starting...
Jun 17 20:54:42 localhost NetworkManager: <info> Activation (wlan0/wireless): a
ccess point 'phlonet' is encrypted, and a key exists. No new key needed.
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'INTERFAC
E_ADD wlan0 wext /var/run/wpa_supplicant '
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was 'OK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'AP_SCAN
1'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was 'OK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'ADD_NETW
ORK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was '0'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'SET_NETW
ORK 0 ssid 70686c6f6e6574'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was 'OK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'SET_NETW
ORK 0 proto WPA'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was 'OK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'SET_NETW
ORK 0 key_mgmt WPA-PSK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was 'OK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'SET_NETW
ORK 0 psk <key>'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was 'OK'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: sending command 'ENABLE_N
ETWORK 0'
Jun 17 20:54:43 localhost NetworkManager: <info> SUP: response was 'OK'
Jun 17 20:54:43 localhost NetworkManager: <info> Activation (wlan0) Stage 2 of
5 (Device Configure) complete.


Jun 17 20:55:43 localhost NetworkManager: <info> Activation (wlan0/wireless): association took too long (>60s), failing activation.
Jun 17 20:55:43 localhost NetworkManager: <info> Activation (wlan0) failure scheduled...
Jun 17 20:55:43 localhost NetworkManager: <info> Activation (wlan0) failed for access point (phlonet)
Jun 17 20:55:43 localhost NetworkManager: <info> Activation (wlan0) failed.
Jun 17 20:55:43 localhost NetworkManager: <info> Deactivating device wlan0.


Any help would be great!!


thanx

phlo