Suggerimento - Che non riguarda Sabayon

[ErMejo]

Volevo chiedere onde evitare una lista lunghissima di script/errori riportati da utenti una finestra, dove magari nello spazio del post non esce una fila di 20 pagine da sopra a sotto e si racchiuderebbe invece in questa finestrella.

Non sò bene i termini di come questa finestra si chiami, mi sono limitato a spiegare su cosa fosse.

[Dark_MaGe]

dipende da phpBB, non so se esiste un modulo che permetta di farlo...lxnay lo conosce di sicuro meglio di me

[Bronzo]

Volevo chiedere onde evitare una lista lunghissima di script/errori riportati da utenti una finestra, dove magari nello spazio del post non esce una fila di 20 pagine da sopra a sotto e si racchiuderebbe invece in questa finestrella.

Non sò bene i termini di come questa finestra si chiami, mi sono limitato a spiegare su cosa fosse.

Basta allegare un file di testo con il codice dentro così si evitano anche le faccine

[ErMejo]

Non credo sia un file da allegare

BO! Lo avevo visto sul forum di ubuntu e serviva parecchio, per post che sembravano davvero papiri. Sullo Shed italiano l'ho visto in un post e mi è subito ritornato in mente.

E' una cosa che serve sicuramente per migliorare l'aspetto del forum.

Ciauz!

[Bronzo]

Non credo sia un file da allegare

BO! Lo avevo visto sul forum di ubuntu e serviva parecchio, per post che sembravano davvero papiri. Sullo Shed italiano l'ho visto in un post e mi è subito ritornato in mente.

E' una cosa che serve sicuramente per migliorare l'aspetto del forum.

Ciauz!

Non mi sono spiegato, basta che chi ha bisogno di postare molto codice non lo scriva nel form ma lo alleghi al forum in uf file di testo semplice [semplice e pratico ]

[ErMejo]

s: switching to UP code
[ 18.346921] ACPI: Core revision 20060707
[ 18.364574] Using local APIC timer interrupts.
[ 18.419168] result 10390645
[ 18.419170] Detected 10.390 MHz APIC timer.
[ 18.420209] SMP alternatives: switching to SMP code
[ 18.420385] Booting processor 1/2 APIC 0x1
[ 18.430835] Initializing CPU#1
[ 18.490935] Calibrating delay using timer specific routine.. 3657.52 BogoMIPS (lpj=1828761)
[ 18.490942] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.490944] CPU: L2 cache: 2048K
[ 18.490947] CPU 1/1 -> Node 0
[ 18.490949] CPU: Physical Processor ID: 0
[ 18.490950] CPU: Processor Core ID: 1
[ 18.490956] CPU1: Thermal monitoring enabled (TM2)
[ 18.491269] Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
[ 18.491931] CPU 1: Syncing TSC to CPU 0.
[ 18.492117] CPU 1: synchronized TSC with CPU 0 (last diff -5 cycles, maxerr 924 cycles)
[ 18.492133] Brought up 2 CPUs
[ 18.492183] testing NMI watchdog ... OK.
[ 18.502186] time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer.
[ 18.502188] time.c: Detected 1828.754 MHz processor.
[ 18.522544] migration_cost=36
[ 18.522900] NET: Registered protocol family 16
[ 18.523222] ACPI: ACPI Dock Station Driver
[ 18.523230] ACPI: bus type pci registered
[ 18.523616] PCI: Using MMCONFIG at f8000000
[ 18.531211] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [VISTA ] OemTableId [FJNB1AF ] [20060707]
[ 18.536763] ACPI: Interpreter enabled
[ 18.536766] ACPI: Using IOAPIC for interrupt routing
[ 18.537208] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.537213] PCI: Probing PCI hardware (bus 00)
[ 18.538098] Boot video device is 0000:00:02.0
[ 18.538574] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 18.538578] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 18.539454] PCI: Transparent bridge - 0000:00:1e.0
[ 18.539531] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
[ 18.539533] Please report the result to linux-kernel to fix this permanently
[ 18.539578] PCI: Bus #0d (-#10) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
[ 18.539581] Please report the result to linux-kernel to fix this permanently
[ 18.539636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.544634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 18.550926] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 18.551222] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 18.551512] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 18.551802] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 18.552100] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 18.552387] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 18.552676] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 18.552972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 18.555240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 18.555565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 18.555990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 18.557337] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.557347] pnp: PnP ACPI init
[ 18.564389] pnp: PnP ACPI: found 13 devices
[ 18.564605] SCSI subsystem initialized
[ 18.564647] libata version 2.00 loaded.
[ 18.564725] usbcore: registered new interface driver usbfs
[ 18.564763] usbcore: registered new interface driver hub
[ 18.564812] usbcore: registered new device driver usb
[ 18.564855] PCI: Using ACPI for IRQ routing
[ 18.564857] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.564865] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[ 18.564871] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[ 18.564874] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[ 18.564877] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3
[ 18.564880] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3
[ 18.564883] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3
[ 18.564920] PCI: Cannot allocate resource region 0 of device 0000:06:00.0
[ 18.564989] NetLabel: Initializing
[ 18.564991] NetLabel: domain hash size = 128
[ 18.564993] NetLabel: protocols = UNLABELED CIPSOv4
[ 18.565008] NetLabel: unlabeled traffic allowed by default
[ 18.565014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 18.565018] hpet0: 3 64-bit timers, 14318180 Hz
[ 18.566041] PCI-GART: No AMD northbridge found.
[ 18.566687] ieee1394: Initialized config rom entry `ip1394'
[ 18.566822] ACPI: PCI Interrupt 0000:08:03.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.618014] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0201000-f02017ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 18.621125] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 18.621134] PCI: Bridge: 0000:00:1c.0
[ 18.621137] IO window: 2000-2fff
[ 18.621142] MEM window: f0100000-f01fffff
[ 18.621146] PREFETCH window: 90000000-900fffff
[ 18.621150] PCI: Bridge: 0000:00:1c.1
[ 18.621152] IO window: disabled.
[ 18.621156] MEM window: disabled.
[ 18.621160] PREFETCH window: disabled.
[ 18.621171] PCI: Bridge: 0000:00:1c.3
[ 18.621173] IO window: disabled.
[ 18.621178] MEM window: 90100000-901fffff
[ 18.621181] PREFETCH window: disabled.
[ 18.621196] PCI: Bus 9, cardbus bridge: 0000:08:03.0
[ 18.621198] IO window: 00003000-000030ff
[ 18.621203] IO window: 00003400-000034ff
[ 18.621207] PREFETCH window: 88000000-8bffffff
[ 18.621212] MEM window: 94000000-97ffffff
[ 18.621216] PCI: Bus 13, cardbus bridge: 0000:08:03.1
[ 18.621218] IO window: 00003800-000038ff
[ 18.621223] IO window: 00003c00-00003cff
[ 18.621227] PREFETCH window: 8c000000-8fffffff
[ 18.621232] MEM window: 98000000-9bffffff
[ 18.621236] PCI: Bridge: 0000:00:1e.0
[ 18.621239] IO window: 3000-3fff
[ 18.621244] MEM window: f0200000-f02fffff
[ 18.621248] PREFETCH window: 88000000-8fffffff
[ 18.621268] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 18.621273] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.621291] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 18.621297] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 18.621314] PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)
[ 18.621318] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 18.621325] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 18.621335] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 18.621349] ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.621365] PCI: Enabling device 0000:08:03.1 (0080 -> 0083)
[ 18.621369] ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.621409] NET: Registered protocol family 2
[ 18.631750] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.632021] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 18.634855] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 18.635721] TCP: Hash tables configured (established 262144 bind 65536)
[ 18.635725] TCP reno registered
[ 18.639855] checking if image is initramfs... it is
[ 18.934457] Freeing initrd memory: 4158k freed
[ 18.936824] Simple Boot Flag at 0x7b set to 0x1
[ 18.937627] audit: initializing netlink socket (disabled)
[ 18.937646] audit(1177430020.624:1): initialized
[ 18.937721] Total HugeTLB memory allocated, 0
[ 18.937846] VFS: Disk quotas dquot_6.5.1
[ 18.937867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 18.937995] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 18.938012] Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
[ 18.938282] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.938562] NTFS driver 2.1.28 [Flags: R/W].
[ 18.938618] QNX4 filesystem 0.2.3 registered.
[ 18.938621] fuse init (API version 7.Cool
[ 18.938709] JFS: nTxBlock = 8192, nTxLock = 65536
[ 18.942580] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 18.942831] SGI XFS Quota Management subsystem
[ 18.943046] GFS2 (built Mar 13 2007 19:45:37) installed
[ 18.943085] SELinux: Registering netfilter hooks
[ 18.951208] io scheduler noop registered
[ 18.951211] io scheduler anticipatory registered
[ 18.951213] io scheduler deadline registered
[ 18.951230] io scheduler cfq registered (default)
[ 18.951573] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.951617] assign_interrupt_mode Found MSI capability
[ 18.951620] Allocate Port Service[0000:00:1c.0:pcie00]
[ 18.951660] Allocate Port Service[0000:00:1c.0:pcie02]
[ 18.951695] Allocate Port Service[0000:00:1c.0:pcie03]
[ 18.951797] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 18.951841] assign_interrupt_mode Found MSI capability
[ 18.951843] Allocate Port Service[0000:00:1c.1:pcie00]
[ 18.951881] Allocate Port Service[0000:00:1c.1:pcie02]
[ 18.951914] Allocate Port Service[0000:00:1c.1:pcie03]
[ 18.952013] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 18.952057] assign_interrupt_mode Found MSI capability
[ 18.952060] Allocate Port Service[0000:00:1c.3:pcie00]
[ 18.952097] Allocate Port Service[0000:00:1c.3:pcie02]
[ 18.952135] Allocate Port Service[0000:00:1c.3:pcie03]
[ 18.980294] lp: driver loaded but no devices found
[ 18.980365] Real Time Clock Driver v1.12ac
[ 18.980466] intel_rng: FWH not detected
[ 18.984819] ppdev: user-space parallel port driver
[ 18.984823] Linux agpgart interface v0.101 (c) Dave Jones
[ 18.984950] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20010680000, using 3072k, total 7872k
[ 18.984953] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[ 18.984956] vesafb: scrolling: redraw
[ 18.984958] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 18.999987] Console: switching to colour frame buffer device 128x48
[ 19.015040] fbsplash: console 0 using theme 'sabayon'
[ 19.175053] fbsplash: switched splash state to 'on' on console 0
[ 19.175445] fb0: VESA VGA frame buffer device
[ 19.175628] ACPI: AC Adapter [AC] (on-line)
[ 19.175698] ACPI: Battery Slot [CMB1] (battery absent)
[ 19.175771] ACPI: Battery Slot [CMB2] (battery absent)
[ 19.175848] input: Power Button (FF) as /class/input/input0
[ 19.175856] ACPI: Power Button (FF) [PWRF]
[ 19.175926] input: Lid Switch as /class/input/input1
[ 19.175933] ACPI: Lid Switch [LID]
[ 19.175985] input: Power Button (CM) as /class/input/input2
[ 19.175989] ACPI: Power Button (CM) [PWRB]
[ 19.176043] input: Sleep Button (CM) as /class/input/input3
[ 19.176048] ACPI: Sleep Button (CM) [SLPB]
[ 19.176451] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.176553] Using specific hotkey driver
[ 19.177246] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [FUJ ] OemTableId [FJNB1AFW] [20060707]
[ 19.177500] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [FUJ ] OemTableId [FJNB1AFW] [20060707]
[ 19.177816] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 19.178424] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [FUJ ] OemTableId [FJNB1AFW] [20060707]
[ 19.178670] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [FUJ ] OemTableId [FJNB1AFW] [20060707]
[ 19.179037] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 19.184620] ACPI: Thermal Zone [TZ00] (27 C)
[ 19.185060] ACPI: Thermal Zone [TZ01] (27 C)
[ 19.185081] ibm_acpi: ec object not found
[ 19.185089] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 19.185244] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.185674] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 19.186099] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.186530] parport: PnPBIOS parport detected.
[ 19.186570] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 19.218463] lp0: using parport0 (interrupt-driven).
[ 19.288641] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e1003677f0e]
[ 19.470937] floppy0: no floppy controllers found
[ 19.471495] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 19.471777] loop: loaded (max 8 devices)
[ 19.471779] Compaq SMART2 Driver (v 2.6.0)
[ 19.471816] HP CISS Driver (v 3.6.14)
[ 19.471985] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 19.472020] MM: desc_per_page = 128
[ 19.472173] Loading iSCSI transport class v2.0-724.
[ 19.472348] Adaptec aacraid driver (1.1-5[2423]-mh3)
[ 19.472527] QLogic Fibre Channel HBA Driver
[ 19.472620] iscsi: registered transport (qla4xxx)
[ 19.472654] QLogic iSCSI HBA Driver
[ 19.472657] Emulex LightPulse Fibre Channel SCSI driver 8.1.11
[ 19.472659] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 19.472797] DC390: clustering now enabled by default. If you get problems load
[ 19.472798] with "disable_clustering=1" and report to maintainers
[ 19.472870] megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
[ 19.472953] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 19.473145] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 19.473183] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 19.473217] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 19.473252] ipr: IBM Power RAID SCSI Device Driver version: 2.3.0 (November 8, 2006)
[ 19.473291] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 19.473325] stex: Promise SuperTrak EX Driver version: 3.1.0.1
[ 19.473362] st: Version 20061107, fixed bufsize 32768, s/g segs 256
[ 19.473397] osst :I: Tape driver with OnStream support version 0.99.4
[ 19.473398] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 19.473542] ahci 0000:00:1f.2: version 2.0
[ 19.473561] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 19.535989] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 19.535996] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 19.536000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 19.536091] ata1: SATA max UDMA/133 cmd 0xFFFFC2001064E500 ctl 0x0 bmdma 0x0 irq 19
[ 19.536154] ata2: SATA max UDMA/133 cmd 0xFFFFC2001064E580 ctl 0x0 bmdma 0x0 irq 19
[ 19.536215] ata3: SATA max UDMA/133 cmd 0xFFFFC2001064E600 ctl 0x0 bmdma 0x0 irq 19
[ 19.536278] ata4: SATA max UDMA/133 cmd 0xFFFFC2001064E680 ctl 0x0 bmdma 0x0 irq 19
[ 19.536288] scsi0 : ahci
[ 19.650715] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 19.652381] ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
[ 19.652386] ata1.00: ata1: dev 0 multi count 16
[ 19.653098] ata1.00: configured for UDMA/133
[ 19.653107] scsi1 : ahci
[ 19.702598] ata2: SATA link down (SStatus 0 SControl 0)
[ 19.702614] scsi2 : ahci
[ 19.721543] ata3: SATA link down (SStatus 0 SControl 300)
[ 19.721558] scsi3 : ahci
[ 19.740493] ata4: SATA link down (SStatus 0 SControl 0)
[ 19.740589] scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.AL PQ: 0 ANSI: 5
[ 19.740694] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 19.740704] sda: Write Protect is off
[ 19.740706] sda: Mode Sense: 00 3a 00 00
[ 19.740722] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.740768] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 19.740778] sda: Write Protect is off
[ 19.740780] sda: Mode Sense: 00 3a 00 00
[ 19.740794] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.740797] sda: sda1 sda2 sda3
[ 19.820776] sd 0:0:0:0: Attached scsi disk sda
[ 19.820845] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.820947] ata_piix 0000:00:1f.1: version 2.00ac7
[ 19.820963] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 19.820976] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 19.821002] ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14
[ 19.821035] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 19.821056] scsi4 : ata_piix
[ 19.870915] ata5.00: ATAPI, max UDMA/33
[ 19.881193] ata5.00: configured for UDMA/33
[ 19.881197] scsi5 : ata_piix
[ 19.881255] ata6: port disabled. ignoring.
[ 19.883189] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.31 PQ: 0 ANSI: 5
[ 19.889770] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.889776] Uniform CD-ROM driver Revision: 3.20
[ 19.889876] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 19.889993] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 19.891605] I2O subsystem v1.325
[ 19.891608] i2o: max drivers = 8
[ 19.891715] I2O Configuration OSM v1.323
[ 19.891780] I2O Bus Adapter OSM v1.317
[ 19.891807] I2O Block Device OSM v1.325
[ 19.891906] I2O SCSI Peripheral OSM v1.316
[ 19.891934] I2O ProcFS OSM v1.316
[ 19.891963] Fusion MPT base driver 3.04.03
[ 19.891964] Copyright (c) 1999-2007 LSI Logic Corporation
[ 19.891969] Fusion MPT SPI Host driver 3.04.03
[ 19.892009] Fusion MPT FC Host driver 3.04.03
[ 19.892051] Fusion MPT SAS Host driver 3.04.03
[ 19.892092] Fusion MPT misc device (ioctl) driver 3.04.03
[ 19.892125] mptctl: Registered with Fusion MPT base driver
[ 19.892128] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 19.892130] Fusion MPT LAN driver 3.04.03
[ 19.892197] usbcore: registered new interface driver usblp
[ 19.892200] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 19.892202] Initializing USB Mass Storage driver...
[ 19.892232] usbcore: registered new interface driver usb-storage
[ 19.892234] USB Mass Storage support registered.
[ 19.892263] usbcore: registered new interface driver libusual
[ 19.892291] usbcore: registered new interface driver hiddev
[ 19.892318] usbcore: registered new interface driver usbhid
[ 19.892320] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 19.892406] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 19.894736] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 19.896092] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.896096] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 19.896099] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 19.896102] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 19.896104] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 19.896110] parport0: cannot grant exclusive access for device parkbd
[ 19.896327] mice: PS/2 mouse device common for all mice
[ 19.925856] input: AT Translated Set 2 keyboard as /class/input/input4
[ 20.017815] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04793/0x302000
[ 20.017818] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 20.027509] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 20.028199] md: linear personality registered for level -1
[ 20.028201] md: raid0 personality registered for level 0
[ 20.028203] md: raid1 personality registered for level 1
[ 20.028206] md: raid10 personality registered for level 10
[ 20.044440] raid6: int64x1 1652 MB/s
[ 20.061393] raid6: int64x2 1996 MB/s
[ 20.078369] raid6: int64x4 1902 MB/s
[ 20.095340] raid6: int64x8 1335 MB/s
[ 20.112298] raid6: sse2x1 2835 MB/s
[ 20.129284] raid6: sse2x2 2824 MB/s
[ 20.146234] raid6: sse2x4 5351 MB/s
[ 20.146236] raid6: using algorithm sse2x4 (5351 MB/s)
[ 20.146238] md: raid6 personality registered for level 6
[ 20.146240] md: raid5 personality registered for level 5
[ 20.146242] md: raid4 personality registered for level 4
[ 20.146245] raid5: automatically using best checksumming function: generic_sse
[ 20.151225] generic_sse: 6500.000 MB/sec
[ 20.151227] raid5: using function: generic_sse (6500.000 MB/sec)
[ 20.151230] md: multipath personality registered for level -4
[ 20.151232] md: faulty personality registered for level -5
[ 20.151368] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 20.151500] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
[ 20.151589] ALSA device list:
[ 20.151590] No soundcards found.
[ 20.151667] TCP bic registered
[ 20.151692] NET: Registered protocol family 1
[ 20.151699] NET: Registered protocol family 17
[ 20.152612] Suspend v2.2.9.3
[ 20.152628] Suspend2 Checksumming support registered.
[ 20.152657] Suspend2 Userspace Storage Manager support registered.
[ 20.152685] Suspend2 Userspace UI support registered.
[ 20.152716] Suspend2 Compressor support registered.
[ 20.152742] Suspend2 Encryptor support registered.
[ 20.152773] Suspend2 Block I/O support registered.
[ 20.152775] Suspend2 Swap Allocator support registered.
[ 20.152801] Suspend2 File Allocator support registered.
[ 20.152883] ACPI: (supports S0 S3 S4 S5)
[ 20.152920] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 20.152995] Freeing unused kernel memory: 392k freed
[ 20.337066] ata1: soft resetting port
[ 20.409842] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.412706] ata1.00: configured for UDMA/133
[ 20.412711] ata1: EH complete
[ 20.412757] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 20.412781] sda: Write Protect is off
[ 20.412785] sda: Mode Sense: 00 3a 00 00
[ 20.412813] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.539086] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 20.539108] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.539111] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.539176] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 20.539207] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.539212] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 20.539223] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0644000
[ 20.543094] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.543223] usb usb1: configuration #1 chosen from 1 choice
[ 20.543265] hub 1-0:1.0: USB hub found
[ 20.543271] hub 1-0:1.0: 8 ports detected
[ 20.590510] USB Universal Host Controller Interface driver v3.0
[ 20.590656] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 20.590667] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.590670] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.590749] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 20.590779] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 20.590955] usb usb2: configuration #1 chosen from 1 choice
[ 20.591021] hub 2-0:1.0: USB hub found
[ 20.591026] hub 2-0:1.0: 2 ports detected
[ 20.692092] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20
[ 20.692104] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.692109] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.692198] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 20.692240] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[ 20.692380] usb usb3: configuration #1 chosen from 1 choice
[ 20.692434] hub 3-0:1.0: USB hub found
[ 20.692439] hub 3-0:1.0: 2 ports detected
[ 20.792913] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.792924] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.792929] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.793018] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 20.793058] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 20.793199] usb usb4: configuration #1 chosen from 1 choice
[ 20.793252] hub 4-0:1.0: USB hub found
[ 20.793257] hub 4-0:1.0: 2 ports detected
[ 20.893736] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 20.893748] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.893753] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.893840] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 20.893880] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 20.894019] usb usb5: configuration #1 chosen from 1 choice
[ 20.894072] hub 5-0:1.0: USB hub found
[ 20.894077] hub 5-0:1.0: 2 ports detected
[ 21.012606] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 21.032887] sl811: driver sl811-hcd, 19 May 2005
[ 21.127199] Registering unionfs 20060916-2203
[ 21.127202] unionfs: debugging is not enabled
[ 21.149849] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
[ 21.149852] Copyright (c) 1999-2006 Intel Corporation.
[ 22.267849] Suspend2: Resume2 parameter is empty. Suspending will be disabled.
[ 22.287061] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 22.287067] EXT3-fs: write access will be enabled during recovery.
[ 23.562392] input: PS/2 Generic Mouse as /class/input/input6
[ 24.773519] kjournald starting. Commit interval 5 seconds
[ 24.773539] EXT3-fs: recovery complete.
[ 24.773788] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.804859] input: PC Speaker as /class/input/input7
[ 28.039354] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 28.043475] NET: Registered protocol family 23
[ 28.052137] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 28.052224] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 28.052265] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 28.114442] Yenta: CardBus bridge found at 0000:08:03.0 [10cf:131e]
[ 28.114467] Yenta O2: res at 0x94/0xD4: 00/ea
[ 28.114469] Yenta O2: enabling read prefetch/write burst
[ 28.186097] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 28.186126] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 28.236551] Yenta: ISA IRQ mask 0x0c38, PCI irq 16
[ 28.236555] Socket status: 30000006
[ 28.236558] Yenta: Raising subordinate bus# of parent bus (#0Cool from #09 to #0c
[ 28.236563] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 28.236566] pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
[ 28.236568] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
[ 28.237076] Yenta: CardBus bridge found at 0000:08:03.1 [10cf:131e]
[ 28.300318] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 28.300321] sdhci: Copyright(c) Pierre Ossman
[ 28.359399] Yenta: ISA IRQ mask 0x0c38, PCI irq 16
[ 28.359404] Socket status: 30000410
[ 28.359407] Yenta: Raising subordinate bus# of parent bus (#0Cool from #0c to #10
[ 28.359414] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 28.359417] pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
[ 28.359420] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
[ 28.383557] ath_hal: module license 'Proprietary' taints kernel.
[ 28.384255] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 28.387751] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[ 28.387755] intelfb: Version 0.9.4
[ 28.445273] si3054: cannot initialize. EXT MID = 0000
[ 28.450538] agpgart: Detected an Intel 945GM Chipset.
[ 28.451078] agpgart: Detected 7932K stolen memory.
[ 28.467709] agpgart: AGP aperture is 256M @ 0xe0000000
[ 28.467931] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.467940] intelfb: Cannot reserve FB region.
[ 28.468799] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.468813] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 28.468891] sky2 v1.10 addr 0xf0100000 irq 16 Yukon-EC Ultra (0xb4) rev 2
[ 28.469027] sky2 eth0: addr 00:17:42:31:19:41
[ 28.469998] sdhci: SDHCI controller found at 0000:08:03.2 [1217:7120] (rev 1)
[ 28.470016] ACPI: PCI Interrupt 0000:08:03.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.470041] sdhci:slot0: Unknown controller version (16). You may experience problems.
[ 28.470045] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
[ 28.470092] mmc0: SDHCI at 0xf0202800 irq 16 PIO
[ 28.498070] wlan: 0.8.4.2 (0.9.2.1)
[ 28.507974] ath_rate_sample: 1.2 (0.9.2.1)
[ 28.526463] ath_pci: 0.9.4.5 (0.9.2.1)
[ 28.526538] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 28.526550] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 28.526918] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 28.932840] pccard: PCMCIA card inserted into slot 1
[ 28.933269] cs: memory probe 0x88000000-0x8fffffff: excluding 0x88000000-0x8fffffff
[ 28.933292] cs: memory probe 0xf0200000-0xf02fffff: excluding 0xf0200000-0xf020ffff
[ 28.951238] pcmcia: registering new device pcmcia1.0
[ 36.162296] EXT3 FS on sda2, internal journal
[ 37.421503] Adding 1349452k swap on /dev/sda3. Priority:-1 extents:1 across:1349452k
[ 44.281805] sky2 eth0: enabling interface
[ 44.284148] sky2 eth0: ram buffer 0K
[ 45.172978] sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none
[ 45.712368] fbsplash: console 1 using theme 'sabayon'
[ 45.719593] fbsplash: switched splash state to 'on' on console 1
[ 45.737195] fbsplash: console 2 using theme 'sabayon'
[ 45.748601] fbsplash: switched splash state to 'on' on console 2
[ 45.763084] fbsplash: console 3 using theme 'sabayon'
[ 45.768527] fbsplash: switched splash state to 'on' on console 3
[ 45.783693] fbsplash: console 4 using theme 'sabayon'
[ 45.796048] fbsplash: switched splash state to 'on' on console 4
[ 45.811214] fbsplash: console 5 using theme 'sabayon'
[ 45.821156] fbsplash: switched splash state to 'on' on console 5
[ 45.824336] fbsplash: console 11 using theme 'sabayon'
[ 45.828663] fbsplash: switched splash state to 'on' on console 11
[ 47.901529] [drm] Initialized drm 1.1.0 20060810
[ 47.911387] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 742.930068] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 743.099964] usb 5-2: configuration #1 chosen from 1 choice
[ 743.255598] Bluetooth: Core ver 2.11
[ 743.256313] NET: Registered protocol family 31
[ 743.256317] Bluetooth: HCI device and connection manager initialized
[ 743.256322] Bluetooth: HCI socket layer initialized
[ 743.275447] Bluetooth: HCI USB driver ver 2.9
[ 743.278882] usbcore: registered new interface driver hci_usb
[ 743.995315] Bluetooth: L2CAP ver 2.8
[ 743.995320] Bluetooth: L2CAP socket layer initialized
[ 744.256305] Bluetooth: RFCOMM socket layer initialized
[ 744.256319] Bluetooth: RFCOMM TTY layer initialized
[ 744.256321] Bluetooth: RFCOMM ver 1.8

poi con lspci

lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12)
06:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)
08:03.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
08:03.1 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
08:03.2 Class 0805: O2 Micro, Inc. Unknown device 7120 (rev 01)
08:03.3 Bridge: O2 Micro, Inc. Unknown device 7130 (rev 01)
08:03.4 FireWire (IEEE 1394): O2 Micro, Inc. Unknown device 00f7 (rev 02)

Tieni sto listone bronzo, dammi una dimostrazione di come dici te, che io de ste cose nun so pratico!

Vediamo se esce come dicevo

[Bronzo]

Scusa non avevo notato che mancava la possibilitare di fare l'upload dei file, se si abilitasse quella sarebbe una cosa tranquilla!

Sorry non avevo notato!

[lxnay]

cercherò di abilitare l'upload dei file il prima possibile.

[Bronzo]

cercherò di abilitare l'upload dei file il prima possibile.

Grazie!

[ErMejo]

Avete quindi capito di cosa si tratta? Apposto