Problem with Touchpad!

[vfafou]

Hello!
I have installed Sabayon 10 KDE 32bit on an Asus eee pc 1008ha.
All was perfect until the latest update, that caused the touchpad to not working.
I searched everywhere, I tried many workarounds but nothing works. I have synaptics driver installed, but when I try modprobe synaptics, says that the module not found!
I tried to boot at the latest daily iso and the problem is the same, so something goes wrong with the latest build!
Any idea will be appreciated!
Thank you in advance!

[aia]

Hello vfafou,

I found this on the net.
http://x2.activestyle.ca/2009/01/09/sab ... d-tap-fix/

[vfafou]

Thank you very much aia.
The problem is that the module synaptics does not load at startup.
I figured a strange behavior a few minutes ago. I restarted the eee pc and noticed that during the KDE splash screen, the touchpad worked for a while but suddenly stopped.
I believe that it is a problem with kernel or with driver because less command does not show the touchpad as device.

[Fitzcarraldo]

Post the contents of the file /var/log/Xorg.0.log.

[linuxfluesterer]

Another idea:
Try to switch your touchpad with your combination of
->funtion key(Fn) + the ->matching key for switch touchpad on/off. Most it is a symbol with a hand on a square and a circle.

I say this, because in my lsmod list there is no synaptics (or anything like syn). What means, synaptics isn't loaded.

But my touchpad is working. I can use mouse or touchpad both to move the mouse pointer.

-Linuxfluesterer (I love KDE ...)

[vfafou]

Post the contents of the file /var/log/Xorg.0.log.

Hello Fitzcarraldo!
Thank you for your reply!

The contents of my xorg.0.log are the following:

Code: Select all

[    31.035]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    31.035] X Protocol Version 11, Revision 0
[    31.035] Build Operating System: Linux 3.2.0-server i686 Gentoo
[    31.035] Current Operating System: Linux flora-nb 3.7.0-sabayon #1 SMP Thu Dec 20 07:12:26 UTC 2012 i686
[    31.035] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86-3.7.0-sabayon ro init=/linuxrc splash=silent,theme:sabayon video=vesafb:ywrap,mtrr:3 vga=791 gfxpayload=1024x768x16 console=tty1 quiet dokeymap keymap=gr domdadm resume=swap:UUID=0f106083-c8a4-441b-a5bb-0666838b9f77 real_resume=UUID=0f106083-c8a4-441b-a5bb-0666838b9f77 root=UUID=01987753-2a18-467e-bfd3-598fbc2b47f7 docrypt
[    31.035] Build Date: 08 September 2012  02:42:30PM
[    31.035] 
[    31.035] Current version of pixman: 0.27.2
[    31.035]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    31.035] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.035] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 30 23:01:47 2013
[    31.104] (==) Using config file: "/etc/X11/xorg.conf"
[    31.104] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    31.104] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    31.134] (==) ServerLayout "Main Layout"
[    31.134] (**) |-->Screen "Screen 0" (0)
[    31.134] (**) |   |-->Monitor "Generic Monitor"
[    31.143] (**) |   |-->Device "SabayonVga0"
[    31.143] (**) Option "AllowMouseOpenFail" "true"
[    31.143] (==) Automatically adding devices
[    31.143] (==) Automatically enabling devices
[    31.150] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[    31.150]    Entry deleted from font path.
[    31.150] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    31.150]    Entry deleted from font path.
[    31.150] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    31.150]    Entry deleted from font path.
[    31.150] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    31.150]    Entry deleted from font path.
[    31.150] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[    31.150]    Entry deleted from font path.
[    31.150] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[    31.150]    Entry deleted from font path.
[    31.150] (==) FontPath set to:
   
[    31.150] (==) ModulePath set to "/usr/lib/xorg/modules"
[    31.150] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    31.159] (II) Loader magic: 0x822e580
[    31.159] (II) Module ABI versions:
[    31.159]    X.Org ANSI C Emulation: 0.4
[    31.159]    X.Org Video Driver: 12.1
[    31.159]    X.Org XInput driver : 16.0
[    31.159]    X.Org Server Extension : 6.0
[    31.161] (--) PCI:*(0:0:2:0) 8086:27ae:1043:830f rev 3, Mem @ 0xfbe00000/524288, 0xd0000000/268435456, 0xfbdc0000/262144, I/O @ 0x0000ec80/8
[    31.161] (--) PCI: (0:0:2:1) 8086:27a6:1043:830f rev 3, Mem @ 0xfbe80000/524288
[    31.161] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    31.161] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    31.161] (II) "dbe" will be loaded by default.
[    31.162] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    31.162] (II) "record" will be loaded by default.
[    31.162] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    31.162] (II) "dri2" will be loaded by default.
[    31.162] (II) LoadModule: "extmod"
[    31.290] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    31.299] (II) Module extmod: vendor="X.Org Foundation"
[    31.299]    compiled for 1.12.4, module version = 1.0.0
[    31.299]    Module class: X.Org Server Extension
[    31.299]    ABI class: X.Org Server Extension, version 6.0
[    31.299] (II) Loading extension MIT-SCREEN-SAVER
[    31.299] (II) Loading extension XFree86-VidModeExtension
[    31.300] (II) Loading extension DPMS
[    31.300] (II) Loading extension XVideo
[    31.300] (II) Loading extension XVideo-MotionCompensation
[    31.300] (II) Loading extension X-Resource
[    31.300] (II) LoadModule: "i2c"
[    31.300] (II) Module "i2c" already built-in
[    31.300] (II) LoadModule: "ddc"
[    31.300] (II) Module "ddc" already built-in
[    31.300] (II) LoadModule: "vbe"
[    31.300] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    31.313] (II) Module vbe: vendor="X.Org Foundation"
[    31.313]    compiled for 1.12.4, module version = 1.1.0
[    31.313]    ABI class: X.Org Video Driver, version 12.1
[    31.313] (II) LoadModule: "dri"
[    31.314] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    31.340] (II) Module dri: vendor="X.Org Foundation"
[    31.340]    compiled for 1.12.4, module version = 1.0.0
[    31.340]    ABI class: X.Org Server Extension, version 6.0
[    31.340] (II) Loading extension XFree86-DRI
[    31.340] (II) LoadModule: "glx"
[    31.341] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    31.369] (II) Module glx: vendor="X.Org Foundation"
[    31.369]    compiled for 1.12.4, module version = 1.0.0
[    31.369]    ABI class: X.Org Server Extension, version 6.0
[    31.369] (==) AIGLX enabled
[    31.369] (II) Loading extension GLX
[    31.369] (II) LoadModule: "synaptics"
[    31.370] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.399] (II) Module synaptics: vendor="X.Org Foundation"
[    31.399]    compiled for 1.12.4, module version = 1.6.2
[    31.399]    Module class: X.Org XInput Driver
[    31.399]    ABI class: X.Org XInput driver, version 16.0
[    31.399] (II) LoadModule: "dbe"
[    31.400] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    31.419] (II) Module dbe: vendor="X.Org Foundation"
[    31.419]    compiled for 1.12.4, module version = 1.0.0
[    31.419]    Module class: X.Org Server Extension
[    31.419]    ABI class: X.Org Server Extension, version 6.0
[    31.419] (II) Loading extension DOUBLE-BUFFER
[    31.419] (II) LoadModule: "record"
[    31.420] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    31.420] (II) Module record: vendor="X.Org Foundation"
[    31.421]    compiled for 1.12.4, module version = 1.13.0
[    31.421]    Module class: X.Org Server Extension
[    31.421]    ABI class: X.Org Server Extension, version 6.0
[    31.421] (II) Loading extension RECORD
[    31.421] (II) LoadModule: "dri2"
[    31.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    31.423] (II) Module dri2: vendor="X.Org Foundation"
[    31.423]    compiled for 1.12.4, module version = 1.2.0
[    31.423]    ABI class: X.Org Server Extension, version 6.0
[    31.423] (II) Loading extension DRI2
[    31.423] (II) LoadModule: "intel"
[    31.424] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    31.458] (II) Module intel: vendor="X.Org Foundation"
[    31.458]    compiled for 1.12.4, module version = 2.20.16
[    31.458]    Module class: X.Org Video Driver
[    31.458]    ABI class: X.Org Video Driver, version 12.1
[    31.459] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
   Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
   Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
   Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
   Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
   Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
   Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
   Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
   Haswell Server (GT2+), Haswell SDV Desktop (GT1),
   Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
   Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
   Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
   Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
   Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
   Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
   Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
   Haswell ULT Server (GT1), Haswell ULT Server (GT2),
   Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
   Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
   Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
   Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
   Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
   ValleyView PO board
[    31.461] (++) using VT number 7

[    31.470] drmOpenDevice: node name is /dev/dri/card0
[    31.470] drmOpenDevice: open result is 7, (OK)
[    31.470] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    31.470] drmOpenDevice: node name is /dev/dri/card0
[    31.471] drmOpenDevice: open result is 7, (OK)
[    31.471] drmOpenByBusid: drmOpenMinor returns 7
[    31.471] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    31.496] drmOpenDevice: node name is /dev/dri/card0
[    31.496] drmOpenDevice: open result is 8, (OK)
[    31.496] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    31.496] drmOpenDevice: node name is /dev/dri/card0
[    31.496] drmOpenDevice: open result is 8, (OK)
[    31.496] drmOpenByBusid: drmOpenMinor returns 8
[    31.496] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    31.496] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    31.496] (==) intel(0): RGB weight 888
[    31.496] (==) intel(0): Default visual is TrueColor
[    31.497] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[    31.498] (**) intel(0): Framebuffer tiled
[    31.498] (**) intel(0): Pixmaps tiled
[    31.498] (**) intel(0): 3D buffers tiled
[    31.498] (**) intel(0): Throttling enabled
[    31.498] (**) intel(0): Delayed flush enabled
[    31.498] (**) intel(0): "Tear free" disabled
[    31.498] (**) intel(0): Forcing per-crtc-pixmaps? no
[    31.499] (II) intel(0): Output LVDS1 using monitor section Generic Monitor
[    31.499] (--) intel(0): found backlight control interface eeepc (type 'platform')
[    31.527] (II) intel(0): Output VGA1 has no monitor section
[    31.527] (II) intel(0): EDID for output LVDS1
[    31.527] (II) intel(0): Manufacturer: AUO  Model: 20d2  Serial#: 0
[    31.527] (II) intel(0): Year: 2008  Week: 1
[    31.527] (II) intel(0): EDID Version: 1.3
[    31.527] (II) intel(0): Digital Display Input
[    31.527] (II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[    31.527] (II) intel(0): Gamma: 2.20
[    31.528] (II) intel(0): No DPMS capabilities specified
[    31.528] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    31.528] (II) intel(0): First detailed timing is preferred mode
[    31.528] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.340 greenY: 0.575
[    31.528] (II) intel(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[    31.528] (II) intel(0): Manufacturer's mask: 0
[    31.528] (II) intel(0): Supported detailed timing:
[    31.528] (II) intel(0): clock: 50.4 MHz   Image Size:  223 x 125 mm
[    31.528] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[    31.528] (II) intel(0): v_active: 600  v_sync: 603  v_sync_end 604 v_blanking: 625 v_border: 0
[    31.528] (II) intel(0): Unknown vendor-specific block f
[    31.528] (II) intel(0):  AUO
[    31.528] (II) intel(0):  B101AW02 V0
[    31.528] (II) intel(0): EDID (in hex):
[    31.528] (II) intel(0):    00ffffffffffff0006afd22000000000
[    31.528] (II) intel(0):    0112010380160d780a11b59758579326
[    31.528] (II) intel(0):    1e505400000001010101010101010101
[    31.528] (II) intel(0):    010101010101b0130040415819201888
[    31.528] (II) intel(0):    3100df7d000000180000000f00000000
[    31.529] (II) intel(0):    00000000000000000020000000fe0041
[    31.529] (II) intel(0):    554f0a202020202020202020000000fe
[    31.529] (II) intel(0):    004231303141573032205630200a009a
[    31.529] (II) intel(0): EDID vendor "AUO", prod id 8402
[    31.529] (II) intel(0): Printing DDC gathered Modelines:
[    31.529] (II) intel(0): Modeline "1024x600"x0.0   50.40  1024 1048 1184 1344  600 603 604 625 -hsync -vsync (37.5 kHz eP)
[    31.529] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    31.529] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    31.529] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    31.529] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    31.530] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    31.530] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    31.530] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    31.530] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    31.530] (II) intel(0): Printing probed modes for output LVDS1
[    31.530] (II) intel(0): Modeline "1024x600"x60.0   50.40  1024 1048 1184 1344  600 603 604 625 -hsync -vsync (37.5 kHz eP)
[    31.530] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    31.530] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    31.530] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    31.559] (II) intel(0): EDID for output VGA1
[    31.559] (II) intel(0): Output LVDS1 connected
[    31.559] (II) intel(0): Output VGA1 disconnected
[    31.559] (II) intel(0): Using exact sizes for initial modes
[    31.559] (II) intel(0): Output LVDS1 using initial mode 1024x600
[    31.559] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.559] (**) intel(0): Display dimensions: (220, 130) mm
[    31.559] (**) intel(0): DPI set to (118, 117)
[    31.559] (II) Loading sub module "dri2"
[    31.559] (II) LoadModule: "dri2"
[    31.561] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    31.561] (II) Module dri2: vendor="X.Org Foundation"
[    31.561]    compiled for 1.12.4, module version = 1.2.0
[    31.561]    ABI class: X.Org Server Extension, version 6.0
[    31.561] (==) Depth 24 pixmap format is 32 bpp
[    31.590] (II) intel(0): SNA initialized with gen3 backend
[    31.590] (==) intel(0): Backing store disabled
[    31.590] (==) intel(0): Silken mouse enabled
[    31.590] (II) intel(0): HW Cursor enabled
[    31.590] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.596] (==) intel(0): DPMS enabled
[    31.599] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[    31.599] (II) intel(0): [DRI2] Setup complete
[    31.599] (II) intel(0): [DRI2]   DRI driver: i915
[    31.599] (II) intel(0): direct rendering: DRI2 Enabled
[    31.599] (WW) intel(0): Option "LogoPath" is not used
[    31.599] (==) intel(0): hotplug detection: "enabled"
[    31.600] (--) RandR disabled
[    31.600] (II) Initializing built-in extension Generic Event Extension
[    31.600] (II) Initializing built-in extension SHAPE
[    31.600] (II) Initializing built-in extension MIT-SHM
[    31.600] (II) Initializing built-in extension XInputExtension
[    31.600] (II) Initializing built-in extension XTEST
[    31.600] (II) Initializing built-in extension BIG-REQUESTS
[    31.600] (II) Initializing built-in extension SYNC
[    31.600] (II) Initializing built-in extension XKEYBOARD
[    31.600] (II) Initializing built-in extension XC-MISC
[    31.600] (II) Initializing built-in extension XINERAMA
[    31.600] (II) Initializing built-in extension XFIXES
[    31.600] (II) Initializing built-in extension RENDER
[    31.600] (II) Initializing built-in extension RANDR
[    31.600] (II) Initializing built-in extension COMPOSITE
[    31.600] (II) Initializing built-in extension DAMAGE
[    31.768] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    31.768] (II) AIGLX: enabled GLX_INTEL_swap_event
[    31.768] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    31.768] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    31.768] (II) AIGLX: Loaded and initialized i915
[    31.768] (II) GLX: Initialized DRI2 GL provider for screen 0
[    31.770] (II) intel(0): switch to mode 1024x600 on crtc 4 (pipe 1)
[    31.789] (II) intel(0): Setting screen physical size to 270 x 158
[    32.440] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.440] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.440] (**) Power Button: Applying InputClass "keyboard"
[    32.440] (II) LoadModule: "evdev"
[    32.440] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.464] (II) Module evdev: vendor="X.Org Foundation"
[    32.464]    compiled for 1.12.4, module version = 2.7.3
[    32.464]    Module class: X.Org XInput Driver
[    32.464]    ABI class: X.Org XInput driver, version 16.0
[    32.464] (II) Using input driver 'evdev' for 'Power Button'
[    32.464] (**) Power Button: always reports core events
[    32.464] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.464] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.464] (--) evdev: Power Button: Found keys
[    32.464] (II) evdev: Power Button: Configuring as keyboard
[    32.464] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    32.464] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.464] (**) Option "xkb_rules" "evdev"
[    32.464] (**) Option "xkb_model" "evdev"
[    32.464] (**) Option "xkb_layout" "gr,us"
[    32.464] (WW) Option "xkb_variant" requires an string value
[    32.465] (WW) Option "XkbVariant" requires an string value
[    32.465] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[    32.637] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    32.637] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.637] (**) Video Bus: Applying InputClass "keyboard"
[    32.637] (II) Using input driver 'evdev' for 'Video Bus'
[    32.637] (**) Video Bus: always reports core events
[    32.637] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    32.637] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    32.637] (--) evdev: Video Bus: Found keys
[    32.637] (II) evdev: Video Bus: Configuring as keyboard
[    32.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    32.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    32.638] (**) Option "xkb_rules" "evdev"
[    32.638] (**) Option "xkb_model" "evdev"
[    32.638] (**) Option "xkb_layout" "gr,us"
[    32.638] (WW) Option "xkb_variant" requires an string value
[    32.638] (WW) Option "XkbVariant" requires an string value
[    32.638] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[    32.639] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    32.639] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.640] (**) Power Button: Applying InputClass "keyboard"
[    32.640] (II) Using input driver 'evdev' for 'Power Button'
[    32.640] (**) Power Button: always reports core events
[    32.640] (**) evdev: Power Button: Device: "/dev/input/event2"
[    32.640] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.640] (--) evdev: Power Button: Found keys
[    32.640] (II) evdev: Power Button: Configuring as keyboard
[    32.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    32.640] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    32.640] (**) Option "xkb_rules" "evdev"
[    32.640] (**) Option "xkb_model" "evdev"
[    32.640] (**) Option "xkb_layout" "gr,us"
[    32.640] (WW) Option "xkb_variant" requires an string value
[    32.640] (WW) Option "XkbVariant" requires an string value
[    32.640] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[    32.643] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    32.643] (II) No input driver specified, ignoring this device.
[    32.643] (II) This device may have been added with another device file.
[    32.644] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    32.644] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.644] (**) Sleep Button: Applying InputClass "keyboard"
[    32.644] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.644] (**) Sleep Button: always reports core events
[    32.644] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    32.644] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.644] (--) evdev: Sleep Button: Found keys
[    32.644] (II) evdev: Sleep Button: Configuring as keyboard
[    32.645] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    32.645] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    32.645] (**) Option "xkb_rules" "evdev"
[    32.645] (**) Option "xkb_model" "evdev"
[    32.645] (**) Option "xkb_layout" "gr,us"
[    32.645] (WW) Option "xkb_variant" requires an string value
[    32.645] (WW) Option "XkbVariant" requires an string value
[    32.645] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[    32.649] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    32.649] (II) No input driver specified, ignoring this device.
[    32.649] (II) This device may have been added with another device file.
[    32.650] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    32.650] (II) No input driver specified, ignoring this device.
[    32.650] (II) This device may have been added with another device file.
[    32.651] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    32.651] (II) No input driver specified, ignoring this device.
[    32.651] (II) This device may have been added with another device file.
[    32.652] (II) config/udev: Adding input device USB2.0 UVC 1.3M WebCam (/dev/input/event8)
[    32.652] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[    32.652] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "keyboard"
[    32.652] (II) Using input driver 'evdev' for 'USB2.0 UVC 1.3M WebCam'
[    32.653] (**) USB2.0 UVC 1.3M WebCam: always reports core events
[    32.653] (**) evdev: USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event8"
[    32.653] (--) evdev: USB2.0 UVC 1.3M WebCam: Vendor 0x13d3 Product 0x5095
[    32.653] (--) evdev: USB2.0 UVC 1.3M WebCam: Found keys
[    32.653] (II) evdev: USB2.0 UVC 1.3M WebCam: Configuring as keyboard
[    32.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8/event8"
[    32.653] (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD, id 10)
[    32.653] (**) Option "xkb_rules" "evdev"
[    32.653] (**) Option "xkb_model" "evdev"
[    32.653] (**) Option "xkb_layout" "gr,us"
[    32.653] (WW) Option "xkb_variant" requires an string value
[    32.653] (WW) Option "XkbVariant" requires an string value
[    32.653] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[    32.656] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event6)
[    32.656] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
[    32.656] (**) Asus EeePC extra buttons: Applying InputClass "keyboard"
[    32.656] (II) Using input driver 'evdev' for 'Asus EeePC extra buttons'
[    32.656] (**) Asus EeePC extra buttons: always reports core events
[    32.656] (**) evdev: Asus EeePC extra buttons: Device: "/dev/input/event6"
[    32.656] (--) evdev: Asus EeePC extra buttons: Vendor 0 Product 0
[    32.656] (--) evdev: Asus EeePC extra buttons: Found keys
[    32.656] (II) evdev: Asus EeePC extra buttons: Configuring as keyboard
[    32.656] (**) Option "config_info" "udev:/sys/devices/platform/eeepc/input/input6/event6"
[    32.656] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD, id 11)
[    32.656] (**) Option "xkb_rules" "evdev"
[    32.657] (**) Option "xkb_model" "evdev"
[    32.657] (**) Option "xkb_layout" "gr,us"
[    32.657] (WW) Option "xkb_variant" requires an string value
[    32.657] (WW) Option "XkbVariant" requires an string value
[    32.657] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[    32.659] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[    32.659] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    32.659] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[    32.659] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    32.659] (**) AT Translated Set 2 keyboard: always reports core events
[    32.659] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[    32.660] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    32.660] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    32.660] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    32.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[    32.660] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    32.660] (**) Option "xkb_rules" "evdev"
[    32.660] (**) Option "xkb_model" "evdev"
[    32.660] (**) Option "xkb_layout" "gr,us"
[    32.660] (WW) Option "xkb_variant" requires an string value
[    32.660] (WW) Option "XkbVariant" requires an string value
[    32.660] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[    32.662] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    32.662] (II) No input driver specified, ignoring this device.
[    32.662] (II) This device may have been added with another device file.
[    61.309] (II) intel(0): EDID vendor "AUO", prod id 8402
[    61.309] (II) intel(0): Printing DDC gathered Modelines:
[    61.309] (II) intel(0): Modeline "1024x600"x0.0   50.40  1024 1048 1184 1344  600 603 604 625 -hsync -vsync (37.5 kHz eP)
[    83.344] (II) intel(0): EDID vendor "AUO", prod id 8402
[    83.344] (II) intel(0): Printing DDC gathered Modelines:
[    83.344] (II) intel(0): Modeline "1024x600"x0.0   50.40  1024 1048 1184 1344  600 603 604 625 -hsync -vsync (37.5 kHz eP)
[   393.049] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
[   393.049] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   393.049] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   393.049] (**) Logitech USB Receiver: always reports core events
[   393.049] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12"
[   393.050] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[   393.050] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   393.050] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   393.050] (--) evdev: Logitech USB Receiver: Found relative axes
[   393.050] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   393.050] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   393.050] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   393.050] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   393.050] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   393.050] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input12/event12"
[   393.051] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 13)
[   393.051] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   393.052] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   393.052] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   393.052] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   393.052] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   393.054] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   393.054] (II) No input driver specified, ignoring this device.
[   393.054] (II) This device may have been added with another device file.
[   393.165] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
[   393.165] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   393.165] (**) Logitech USB Receiver: Applying InputClass "keyboard"
[   393.165] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   393.165] (**) Logitech USB Receiver: always reports core events
[   393.165] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
[   393.165] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[   393.166] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   393.166] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   393.166] (--) evdev: Logitech USB Receiver: Found relative axes
[   393.166] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   393.166] (--) evdev: Logitech USB Receiver: Found absolute axes
[   393.166] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   393.166] (--) evdev: Logitech USB Receiver: Found keys
[   393.166] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   393.166] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   393.166] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   393.166] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   393.166] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   393.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input13/event13"
[   393.166] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 14)
[   393.167] (**) Option "xkb_rules" "evdev"
[   393.167] (**) Option "xkb_model" "evdev"
[   393.167] (**) Option "xkb_layout" "gr,us"
[   393.167] (WW) Option "xkb_variant" requires an string value
[   393.167] (WW) Option "XkbVariant" requires an string value
[   393.167] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
[   393.168] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   393.168] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   393.169] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   393.169] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   393.169] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   393.170] (**) Logitech USB Receiver: (accel) acceleration threshold: 4


[vfafou]

Another idea:
Try to switch your touchpad with your combination of
->funtion key(Fn) + the ->matching key for switch touchpad on/off. Most it is a symbol with a hand on a square and a circle.

I say this, because in my lsmod list there is no synaptics (or anything like syn). What means, synaptics isn't loaded.

But my touchpad is working. I can use mouse or touchpad both to move the mouse pointer.

-Linuxfluesterer (I love KDE ...)

Hello linuxfluesterer!
Thank you for your reply.
I tried this already but nothing happened.
I hope there is a solution and I believe that would be easy!

[Fitzcarraldo]

I can't see any error messages in your log file that relate to the touchpad.

Have you checked whether the touchpad is enabled in System Settings?

Do you have xf86-input-mouse and xf86-input-keyboard installed? If you do, uninstall them. You should only have xf86-input-evdev and xf86-input-synaptics installed.

Do you have the file /etc/X11/xorg.conf or any files in the /etc/X11/xorg.conf.d/ directory? If you do, do any of them contain any lines relating to the touchpad? If any of them do, try commenting out all the lines relating to the touchpad and creating a separate file /etc/X11/xorg.conf.d/30-synaptics.conf containing the following:

Code: Select all

Section "InputClass"
   Identifier "touchpad"
   Driver "synaptics"
   MatchIsTouchpad "on"
      Option "TapButton1" "1"
      Option "TapButton2" "2"
      Option "TapButton3" "3"
      Option "VertEdgeScroll" "on"
      Option "VertTwoFingerScroll" "on"
      Option "HorizEdgeScroll" "on"
      Option "HorizTwoFingerScroll" "on"
      Option "CircularScrolling" "on"
      Option "CircScrollTrigger" "2"
      Option "EmulateTwoFingerMinZ" "40"
      Option "EmulateTwoFingerMinW" "8"
      Option "LeftEdge" "1700" # x coord left
      Option "RightEdge" "5300" # x coord right
      Option "TopEdge" "1700" # y coord top
      Option "BottomEdge" "4200" # y coord bottom
      Option "FingerLow" "25" # pressure below this level triggers release
      Option "FingerHigh" "30" # pressure above this level triggers touch
      Option "MaxTapTime" "180" # max time in ms for detecting tap
EndSection

and reboot. If there are no lines in /etc/X11/xorg.conf or /etc/X11/xorg.conf.d/* relating to the touchpad, create the above-mentioned file anyway, and see if it makes a difference after you reboot.

[vfafou]

I can't see any error messages in your log file that relate to the touchpad.

Have you checked whether the touchpad is enabled in System Settings?

Do you have xf86-input-mouse and xf86-input-keyboard installed? If you do, uninstall them. You should only have xf86-input-evdev and xf86-input-synaptics installed.

Do you have the file /etc/X11/xorg.conf or any files in the /etc/X11/xorg.conf.d/ directory? If you do, do any of them contain any lines relating to the touchpad? If any of them do, try commenting out all the lines relating to the touchpad and creating a separate file /etc/X11/xorg.conf.d/30-synaptics.conf containing the following:

Code: Select all

Section "InputClass"
   Identifier "touchpad"
   Driver "synaptics"
   MatchIsTouchpad "on"
      Option "TapButton1" "1"
      Option "TapButton2" "2"
      Option "TapButton3" "3"
      Option "VertEdgeScroll" "on"
      Option "VertTwoFingerScroll" "on"
      Option "HorizEdgeScroll" "on"
      Option "HorizTwoFingerScroll" "on"
      Option "CircularScrolling" "on"
      Option "CircScrollTrigger" "2"
      Option "EmulateTwoFingerMinZ" "40"
      Option "EmulateTwoFingerMinW" "8"
      Option "LeftEdge" "1700" # x coord left
      Option "RightEdge" "5300" # x coord right
      Option "TopEdge" "1700" # y coord top
      Option "BottomEdge" "4200" # y coord bottom
      Option "FingerLow" "25" # pressure below this level triggers release
      Option "FingerHigh" "30" # pressure above this level triggers touch
      Option "MaxTapTime" "180" # max time in ms for detecting tap
EndSection

and reboot. If there are no lines in /etc/X11/xorg.conf or /etc/X11/xorg.conf.d/* relating to the touchpad, create the above-mentioned file anyway, and see if it makes a difference after you reboot.

Hello Fitzcarraldo!
Thank you for your reply!
Unfortunately, nothing happened with your suggestion. The bad news is that booting from the latest build, I have the same issue!
I think that there is a problem with KDE 4.9.5 because I boot at Gnome latest build and all are good!