USB 3.0 PCI Express card disappered

[abadonna]

Some time ago I have posted my "cry for help" http://forum.sabayon.org/viewtopic.php?f=53&t=26591&p=146293&hilit=astrotek#p146293. My Astrotek PCI Express USB 3.0 controller stopped being recognised by Sabayon.
Before the critical update (I have mentioned in previous post) it worked like a charm, and since then it is no longer recognised...

I hope you can help me with this issue. I haven't got my USB 3 working any more

dmesg

Code: Select all

d for level -5
[    1.333248] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.334190] cpuidle: using governor ladder
[    1.335775] cpuidle: using governor menu
[    1.335892] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    1.336920] usbcore: registered new interface driver usbhid
[    1.336921] usbhid: USB HID core driver
[    1.336971] TCP bic registered
[    1.336973] NET: Registered protocol family 17
[    1.337011] Registering the dns_resolver key type
[    1.350032] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.357282] fbcondecor: console 0 using theme 'sabayon'
[    1.362083] fbcondecor: switched decor state to 'on' on console 0
[    1.628502] ata2: SATA link down (SStatus 0 SControl 300)
[    1.628564] ata1: SATA link down (SStatus 0 SControl 300)
[    1.642202] ata6: SATA link down (SStatus 0 SControl 300)
[    1.792102] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.795257] ata5.00: ATAPI: ATAPI   iHES208   2, 8L0C, max UDMA/100
[    1.801192] ata5.00: configured for UDMA/100
[    2.094411] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.094426] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.095397] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.095414] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.100788] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[    2.100793] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.100801] ata4.01: ATAPI: PLEXTOR DVDR   PX-L890SA, 1.06, max UDMA/100
[    2.106754] ata4.00: configured for UDMA/133
[    2.112495] ata4.01: configured for UDMA/100
[    2.136376] ata3.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133
[    2.136378] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.170039] ata3.01: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[    2.170043] ata3.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.205005] Refined TSC clocksource calibration: 2806.363 MHz.
[    2.205011] Switching to clocksource tsc
[    2.208258] ata3.00: configured for UDMA/133
[    2.244824] ata3.01: configured for UDMA/133
[    2.245117] scsi 2:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.23 PQ: 0 ANSI: 5
[    2.246398] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    2.246719] sd 2:0:0:0: [sda] Write Protect is off
[    2.246723] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.246767] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.246778] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.247289] scsi 2:0:1:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    2.248202] sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.248217] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    2.248694] scsi 3:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
[    2.248898]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.248948] sd 2:0:1:0: [sdb] Write Protect is off
[    2.248952] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.248974] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.249185] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.249225] sd 3:0:0:0: [sdc] Write Protect is off
[    2.249230] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.249241] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.249328] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.252990] scsi 3:0:1:0: CD-ROM            PLEXTOR  DVDR   PX-L890SA 1.06 PQ: 0 ANSI: 5
[    2.260208]  sdc: sdc1
[    2.263644] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.263648] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.263724] sd 3:0:0:0: [sdc] Attached SCSI disk
[    2.264044] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    2.264447] sr 3:0:1:0: Attached scsi generic sg3 type 5
[    2.268594] scsi 4:0:0:0: CD-ROM            ATAPI    iHES208   2      8L0C PQ: 0 ANSI: 5
[    2.273526] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.274068] sr 4:0:0:0: Attached scsi CD-ROM sr1
[    2.274405] sr 4:0:0:0: Attached scsi generic sg4 type 5
[    2.284487]  sdb: sdb1
[    2.284719] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.284830] sd 2:0:1:0: [sdb] Attached SCSI disk
[    2.437408] registered taskstats version 1
[    2.445594] rtc_cmos 00:03: setting system clock to 2012-03-13 15:58:08 UTC (1331654288)
[    2.453133] Freeing unused kernel memory: 592k freed
[    2.897934] scsi8 : pata_legacy
[    2.898132] ata9: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    3.052107] scsi9 : pata_legacy
[    3.052413] ata10: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    3.351240] scsi: <fdomain> Detection failed (no card)
[    3.415733] imm: Version 2.05 (for Linux 2.4.0)
[    3.499993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.500026] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.500272] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.500275] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.500551] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.500582] ehci_hcd 0000:00:1a.7: debug port 1
[    3.504461] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[    3.504475] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[    3.514968] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.515008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.515011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.515015] usb usb1: Product: EHCI Host Controller
[    3.515017] usb usb1: Manufacturer: Linux 3.2.0-sabayon ehci_hcd
[    3.515020] usb usb1: SerialNumber: 0000:00:1a.7
[    3.515629] hub 1-0:1.0: USB hub found
[    3.515639] hub 1-0:1.0: 6 ports detected
[    3.515964] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.515975] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.515977] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.516226] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.516255] ehci_hcd 0000:00:1d.7: debug port 1
[    3.520140] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[    3.520151] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[    3.530846] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.530881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.530884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.530887] usb usb2: Product: EHCI Host Controller
[    3.530890] usb usb2: Manufacturer: Linux 3.2.0-sabayon ehci_hcd
[    3.530893] usb usb2: SerialNumber: 0000:00:1d.7
[    3.531611] hub 2-0:1.0: USB hub found
[    3.531620] hub 2-0:1.0: 6 ports detected
[    3.556345] uhci_hcd: USB Universal Host Controller Interface driver
[    3.556378] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.556387] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.556391] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.556684] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.556709] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    3.556734] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.556736] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.556738] usb usb3: Product: UHCI Host Controller
[    3.556740] usb usb3: Manufacturer: Linux 3.2.0-sabayon uhci_hcd
[    3.556741] usb usb3: SerialNumber: 0000:00:1a.0
[    3.557228] hub 3-0:1.0: USB hub found
[    3.557234] hub 3-0:1.0: 2 ports detected
[    3.557496] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    3.557503] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.557506] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.557619] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    3.557647] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    3.557680] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.557682] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.557684] usb usb4: Product: UHCI Host Controller
[    3.557685] usb usb4: Manufacturer: Linux 3.2.0-sabayon uhci_hcd
[    3.557687] usb usb4: SerialNumber: 0000:00:1a.1
[    3.558133] hub 4-0:1.0: USB hub found
[    3.558136] hub 4-0:1.0: 2 ports detected
[    3.558350] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.558355] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    3.558358] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    3.558501] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    3.558528] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[    3.558550] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.558552] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.558554] usb usb5: Product: UHCI Host Controller
[    3.558555] usb usb5: Manufacturer: Linux 3.2.0-sabayon uhci_hcd
[    3.558557] usb usb5: SerialNumber: 0000:00:1a.2
[    3.558720] hub 5-0:1.0: USB hub found
[    3.558725] hub 5-0:1.0: 2 ports detected
[    3.558946] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.558951] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.558954] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.559155] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    3.559176] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    3.559199] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.559201] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.559203] usb usb6: Product: UHCI Host Controller
[    3.559204] usb usb6: Manufacturer: Linux 3.2.0-sabayon uhci_hcd
[    3.559206] usb usb6: SerialNumber: 0000:00:1d.0
[    3.559499] hub 6-0:1.0: USB hub found
[    3.559503] hub 6-0:1.0: 2 ports detected
[    3.559631] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.559637] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.559640] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.559836] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    3.559858] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    3.559881] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.559883] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.559884] usb usb7: Product: UHCI Host Controller
[    3.559886] usb usb7: Manufacturer: Linux 3.2.0-sabayon uhci_hcd
[    3.559887] usb usb7: SerialNumber: 0000:00:1d.1
[    3.560212] hub 7-0:1.0: USB hub found
[    3.560217] hub 7-0:1.0: 2 ports detected
[    3.560378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.560383] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.560386] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.560487] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    3.560509] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    3.560531] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    3.560533] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.560535] usb usb8: Product: UHCI Host Controller
[    3.560536] usb usb8: Manufacturer: Linux 3.2.0-sabayon uhci_hcd
[    3.560538] usb usb8: SerialNumber: 0000:00:1d.2
[    3.560741] hub 8-0:1.0: USB hub found
[    3.560746] hub 8-0:1.0: 2 ports detected
[    3.578861] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.598913] sl811: driver sl811-hcd, 19 May 2005
[    3.818025] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[    3.819711] JFS: nTxBlock = 8192, nTxLock = 65536
[    3.865707] RPC: Registered named UNIX socket transport module.
[    3.865710] RPC: Registered udp transport module.
[    3.865711] RPC: Registered tcp transport module.
[    3.865712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.917477] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    3.919127] SGI XFS Quota Management subsystem
[    3.937868] usb 1-4: New USB device found, idVendor=05e3, idProduct=0723
[    3.937871] usb 1-4: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[    3.937873] usb 1-4: Product: USB Storage
[    3.937875] usb 1-4: Manufacturer: Generic
[    3.939120] usb-storage 1-4:1.0: Quirks match for vid 05e3 pid 0723: 8000
[    3.939142] scsi10 : usb-storage 1-4:1.0
[    3.944792] fuse init (API version 7.17)
[    3.971784] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.971787] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.028819] iscsi: registered transport (tcp)
[    4.349868] usb 2-6: new high-speed USB device number 5 using ehci_hcd
[    4.463962] usb 2-6: New USB device found, idVendor=0424, idProduct=2514
[    4.463966] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.465354] hub 2-6:1.0: USB hub found
[    4.465518] hub 2-6:1.0: 3 ports detected
[    4.671976] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    4.938270] scsi 10:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[    4.940076] sd 10:0:0:0: Attached scsi generic sg5 type 0
[    4.942880] usb 6-1: New USB device found, idVendor=046d, idProduct=08b4
[    4.942885] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.943204] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[    5.151999] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[    5.320974] usb 6-2: New USB device found, idVendor=0556, idProduct=0001
[    5.320979] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.320982] usb 6-2: Product: AK5370         
[    5.320985] usb 6-2: Manufacturer: AKM             
[    5.528922] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[    5.695375] usb 8-1: New USB device found, idVendor=1532, idProduct=0101
[    5.695379] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.695382] usb 8-1: Product: Razer Copperhead Laser Mouse
[    5.695385] usb 8-1: Manufacturer: Razer
[    5.702736] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[    5.703667] generic-usb 0003:1532:0101.0001: input,hidraw0: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.2-1/input0
[    5.706837] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[    5.707428] generic-usb 0003:1532:0101.0002: input,hidraw1: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.2-1/input1
[    5.780521] usb 2-6.1: new high-speed USB device number 6 using ehci_hcd
[    5.865561] usb 2-6.1: New USB device found, idVendor=0424, idProduct=2640
[    5.865566] usb 2-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.866731] hub 2-6.1:1.0: USB hub found
[    5.866918] hub 2-6.1:1.0: 3 ports detected
[    6.139641] usb 2-6.1.1: new high-speed USB device number 7 using ehci_hcd
[    6.250120] usb 2-6.1.1: New USB device found, idVendor=0424, idProduct=4063
[    6.250125] usb 2-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.250128] usb 2-6.1.1: Product: Ultra Fast Media Reader
[    6.250130] usb 2-6.1.1: Manufacturer: Generic
[    6.250133] usb 2-6.1.1: SerialNumber: 0911280000D8
[    6.251447] scsi11 : usb-storage 2-6.1.1:1.0
[    7.255489] scsi 11:0:0:0: Direct-Access     Generic  Ultra HS-SD/MMC  1.88 PQ: 0 ANSI: 0
[    7.257396] sd 11:0:0:0: Attached scsi generic sg6 type 0
[    7.265269] sd 11:0:0:0: [sde] Attached SCSI removable disk
[   14.223663] mdadm: sending ioctl 1261 to a partition!
[   14.223667] mdadm: sending ioctl 1261 to a partition!
[   14.243553] mdadm: sending ioctl 1261 to a partition!
[   14.243556] mdadm: sending ioctl 1261 to a partition!
[   14.244243] mdadm: sending ioctl 1261 to a partition!
[   14.244246] mdadm: sending ioctl 1261 to a partition!
[   14.244513] mdadm: sending ioctl 1261 to a partition!
[   14.244515] mdadm: sending ioctl 1261 to a partition!
[   14.267060] mdadm: sending ioctl 800c0910 to a partition!
[   14.267064] mdadm: sending ioctl 800c0910 to a partition!
[   14.589374] PM: Starting manual resume from disk
[   14.764834] VFS: could not find a valid V7 on sda3.
[   14.812063] UDF-fs: warning (device sda3): udf_fill_super: No partition found (1)
[   14.881795] XFS (sda3): Mounting Filesystem
[   14.908366] XFS (sda3): Ending clean mount
[   15.375287] udevd[5700]: starting version 171
[   15.470679] iTCO_vendor_support: vendor-support=0
[   15.472222] EDAC MC: Ver: 2.1.0
[   15.477291] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   15.477402] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[   15.477464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.478166] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
[   15.478188] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[   15.478197] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   15.483227] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   15.483246] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   15.483284] r8169 0000:06:00.0: setting latency timer to 64
[   15.483338] r8169 0000:06:00.0: irq 69 for MSI/MSI-X
[   15.483458] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc900117c4000, e0:cb:4e:9e:8d:42, XID 1c4000c0 IRQ 69
[   15.483461] r8169 0000:06:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[   15.483595] firewire_ohci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   15.483602] firewire_ohci 0000:05:00.0: setting latency timer to 64
[   15.528781] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   15.528785] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[   15.528787] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.535580] firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[   15.545567] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   15.657400] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.657460] snd_hda_intel 0000:00:1b.0: irq 70 for MSI/MSI-X
[   15.657479] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   15.663531] Error: Driver 'pcspkr' is already registered, aborting...
[   15.674274] Linux media interface: v0.10
[   15.681054] hda_codec: ALC1200: BIOS auto-probing.
[   15.683989] Linux video capture interface: v2.00
[   15.684029] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[   15.688946] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   15.698893] usbcore: registered new interface driver snd-usb-audio
[   15.789467] pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
[   15.911376] Disabling lock debugging due to kernel taint
[   15.911382] nvidia: module license 'NVIDIA' taints kernel.
[   15.957148] nvidia 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[   15.957155] nvidia 0000:03:00.0: setting latency timer to 64
[   15.957158] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   15.957445] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.20  Mon Feb  6 21:07:30 PST 2012
[   16.036588] firewire_core: created device fw0: GUID 001e8c0000f7310f, S400
[   17.980353] pwc: Registered as video0.
[   17.980418] input: PWC snapshot button as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/input/input8
[   17.980688] usbcore: registered new interface driver Philips webcam
[   19.458433] vboxdrv: Found 8 processor cores.
[   19.458624] VBoxDrv: dbg - g_abExecMemory=ffffffffa0fa3f20
[   19.458852] vboxdrv: fAsync=0 offMin=0x533 offMax=0x1f0e6
[   19.458906] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   19.458908] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000).
[   19.912410] XFS (sda6): Mounting Filesystem
[   19.937830] XFS (sda6): Ending clean mount
[   19.957342] XFS (sdc1): Mounting Filesystem
[   20.108071] XFS (sdc1): Ending clean mount
[   20.591961] fbcondecor: console 1 using theme 'sabayon'
[   20.638658] fbcondecor: switched decor state to 'on' on console 1
[   20.688860] fbcondecor: console 2 using theme 'sabayon'
[   20.738569] fbcondecor: switched decor state to 'on' on console 2
[   20.787598] fbcondecor: console 3 using theme 'sabayon'
[   20.834856] fbcondecor: switched decor state to 'on' on console 3
[   20.883101] fbcondecor: console 4 using theme 'sabayon'
[   20.929474] fbcondecor: switched decor state to 'on' on console 4
[   20.978690] fbcondecor: console 5 using theme 'sabayon'
[   21.026197] fbcondecor: switched decor state to 'on' on console 5
[   21.074764] fbcondecor: console 6 using theme 'sabayon'
[   21.124048] fbcondecor: switched decor state to 'on' on console 6
[   21.172812] fbcondecor: console 7 using theme 'sabayon'
[   21.219908] fbcondecor: switched decor state to 'on' on console 7
[   21.268288] fbcondecor: console 8 using theme 'sabayon'
[   21.316425] fbcondecor: switched decor state to 'on' on console 8
[   21.366356] fbcondecor: console 9 using theme 'sabayon'
[   21.413638] fbcondecor: switched decor state to 'on' on console 9
[   21.462213] fbcondecor: console 10 using theme 'sabayon'
[   21.511215] fbcondecor: switched decor state to 'on' on console 10
[   21.559834] fbcondecor: console 11 using theme 'sabayon'
[   21.607455] fbcondecor: switched decor state to 'on' on console 11
[   22.266404] fbcondecor: switched decor state to 'off' on console 6
[   22.330846] fbcondecor: console 6 using theme 'sabayon'
[   22.331792] fbcondecor: switched decor state to 'on' on console 6
[   22.343807] r8169 0000:06:00.0: eth0: link down
[   22.343813] r8169 0000:06:00.0: eth0: link down
[   22.405024] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.411470] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   22.425285] NET: Registered protocol family 10
[   22.425464] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.428089] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.696714] r8169 0000:06:00.0: eth0: link up
[   24.716812] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   34.795749] eth0: no IPv6 routers present
[   85.039450] Adding 2096444k swap on /dev/sda5.  Priority:-1 extents:1 across:2096444k SS
[ 5844.169411] ata3.00: configured for UDMA/133
[ 5844.209076] ata3.01: configured for UDMA/133
[ 5844.209084] ata3: EH complete
[ 5844.580391] ata3.00: configured for UDMA/133
[ 5844.632832] ata3.01: configured for UDMA/133
[ 5844.632838] ata3: EH complete
[ 5844.851012] ata4.00: configured for UDMA/133
[ 5844.872660] ata4.01: configured for UDMA/100
[ 5844.872665] ata4: EH complete
[18356.514253] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[18356.629896] usb 1-3: New USB device found, idVendor=1b1c, idProduct=1a01
[18356.629899] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18356.629901] usb 1-3: Product: Voyager GT 3.0
[18356.629902] usb 1-3: Manufacturer: Corsair
[18356.629903] usb 1-3: SerialNumber: 118120000000190
[18356.630420] scsi12 : usb-storage 1-3:1.0
[18357.628443] scsi 12:0:0:0: Direct-Access     Corsair  Voyager GT 3.0   0.00 PQ: 0 ANSI: 2
[18357.629313] sd 12:0:0:0: Attached scsi generic sg7 type 0
[18357.630404] sd 12:0:0:0: [sdf] 63080448 512-byte logical blocks: (32.2 GB/30.0 GiB)
[18357.630895] sd 12:0:0:0: [sdf] Write Protect is off
[18357.630898] sd 12:0:0:0: [sdf] Mode Sense: 00 00 00 00
[18357.631382] sd 12:0:0:0: [sdf] Asking for cache data failed
[18357.631384] sd 12:0:0:0: [sdf] Assuming drive cache: write through
[18357.633754] sd 12:0:0:0: [sdf] Asking for cache data failed
[18357.633757] sd 12:0:0:0: [sdf] Assuming drive cache: write through
[18357.635482]  sdf: sdf1
[18357.638103] sd 12:0:0:0: [sdf] Asking for cache data failed
[18357.638107] sd 12:0:0:0: [sdf] Assuming drive cache: write through
[18357.638110] sd 12:0:0:0: [sdf] Attached SCSI removable disk
[18651.459082] sdf: detected capacity change from 32297189376 to 0
[18799.118215] usb 1-3: USB disconnect, device number 3
[19008.588524] usb 2-6: USB disconnect, device number 5
[19008.588528] usb 2-6.1: USB disconnect, device number 6
[19008.588530] usb 2-6.1.1: USB disconnect, device number 7
[52665.559434] usb 2-6: new high-speed USB device number 8 using ehci_hcd
[52665.673624] usb 2-6: New USB device found, idVendor=0424, idProduct=2514
[52665.673629] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[52665.674050] hub 2-6:1.0: USB hub found
[52665.674213] hub 2-6:1.0: 3 ports detected
[52665.946600] usb 2-6.1: new high-speed USB device number 9 using ehci_hcd
[52666.031751] usb 2-6.1: New USB device found, idVendor=0424, idProduct=2640
[52666.031756] usb 2-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[52666.032000] hub 2-6.1:1.0: USB hub found
[52666.032081] hub 2-6.1:1.0: 3 ports detected
[52666.304813] usb 2-6.1.1: new high-speed USB device number 10 using ehci_hcd
[52666.413912] usb 2-6.1.1: New USB device found, idVendor=0424, idProduct=4063
[52666.413917] usb 2-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[52666.413920] usb 2-6.1.1: Product: Ultra Fast Media Reader
[52666.413923] usb 2-6.1.1: Manufacturer: Generic
[52666.413926] usb 2-6.1.1: SerialNumber: 0911280000D8
[52666.414542] scsi13 : usb-storage 2-6.1.1:1.0
[52667.417428] scsi 13:0:0:0: Direct-Access     Generic  Ultra HS-SD/MMC  1.88 PQ: 0 ANSI: 0
[52667.418711] sd 13:0:0:0: Attached scsi generic sg6 type 0
[52667.426160] sd 13:0:0:0: [sde] Attached SCSI removable disk
[52843.350090] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[52843.465654] usb 1-3: New USB device found, idVendor=1b1c, idProduct=1a01
[52843.465659] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[52843.465663] usb 1-3: Product: Voyager GT 3.0
[52843.465665] usb 1-3: Manufacturer: Corsair
[52843.465668] usb 1-3: SerialNumber: 118120000000190
[52843.466473] scsi14 : usb-storage 1-3:1.0
[52844.465410] scsi 14:0:0:0: Direct-Access     Corsair  Voyager GT 3.0   0.00 PQ: 0 ANSI: 2
[52844.466618] sd 14:0:0:0: Attached scsi generic sg7 type 0
[52844.467136] sd 14:0:0:0: [sdf] 63080448 512-byte logical blocks: (32.2 GB/30.0 GiB)
[52844.467646] sd 14:0:0:0: [sdf] Write Protect is off
[52844.467651] sd 14:0:0:0: [sdf] Mode Sense: 00 00 00 00
[52844.468110] sd 14:0:0:0: [sdf] Asking for cache data failed
[52844.468113] sd 14:0:0:0: [sdf] Assuming drive cache: write through
[52844.470506] sd 14:0:0:0: [sdf] Asking for cache data failed
[52844.470510] sd 14:0:0:0: [sdf] Assuming drive cache: write through
[52844.472531]  sdf: sdf1
[52844.474976] sd 14:0:0:0: [sdf] Asking for cache data failed
[52844.474980] sd 14:0:0:0: [sdf] Assuming drive cache: write through
[52844.474983] sd 14:0:0:0: [sdf] Attached SCSI removable disk
[53198.334041] usb 2-6: USB disconnect, device number 8
[53198.334045] usb 2-6.1: USB disconnect, device number 9
[53198.334048] usb 2-6.1.1: USB disconnect, device number 10
[53211.133588] sd 14:0:0:0: [sdf] Device not ready
[53211.133590] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.133593] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.133595] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.133598] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 00 09 c0 00 00 08 00
[53211.133603] end_request: I/O error, dev sdf, sector 2496
[53211.133605] Buffer I/O error on device sdf1, logical block 56
[53211.135123] sd 14:0:0:0: [sdf] Device not ready
[53211.135125] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.135127] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.135130] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.135132] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 00 09 c0 00 00 08 00
[53211.135136] end_request: I/O error, dev sdf, sector 2496
[53211.135139] Buffer I/O error on device sdf1, logical block 56
[53211.136277] sd 14:0:0:0: [sdf] Device not ready
[53211.136279] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.136281] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.136283] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.136285] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 00 0a 00 00 00 08 00
[53211.136290] end_request: I/O error, dev sdf, sector 2560
[53211.136292] Buffer I/O error on device sdf1, logical block 64
[53211.137455] sd 14:0:0:0: [sdf] Device not ready
[53211.137457] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.137459] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.137462] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.137464] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 00 0a 00 00 00 08 00
[53211.137468] end_request: I/O error, dev sdf, sector 2560
[53211.137470] Buffer I/O error on device sdf1, logical block 64
[53211.138331] sd 14:0:0:0: [sdf] Device not ready
[53211.138335] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.138339] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.138343] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.138347] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 00 08 20 00 00 08 00
[53211.138356] end_request: I/O error, dev sdf, sector 2080
[53211.138359] Buffer I/O error on device sdf1, logical block 4
[53211.139390] sd 14:0:0:0: [sdf] Device not ready
[53211.139393] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.139397] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.139402] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.139405] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 00 08 20 00 00 08 00
[53211.139414] end_request: I/O error, dev sdf, sector 2080
[53211.139417] Buffer I/O error on device sdf1, logical block 4
[53211.140449] sd 14:0:0:0: [sdf] Device not ready
[53211.140452] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.140456] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.140460] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.140464] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 01 e1 47 f8 00 00 08 00
[53211.140472] end_request: I/O error, dev sdf, sector 31541240
[53211.140475] Buffer I/O error on device sdf1, logical block 3942399
[53211.141448] sd 14:0:0:0: [sdf] Device not ready
[53211.141451] sd 14:0:0:0: [sdf]  Result: hostbyte=0x00 driverbyte=0x08
[53211.141455] sd 14:0:0:0: [sdf]  Sense Key : 0x2 [current]
[53211.141459] sd 14:0:0:0: [sdf]  ASC=0x3a ASCQ=0x0
[53211.141463] sd 14:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 00 18 00 00 00 08 00
[53211.141471] end_request: I/O error, dev sdf, sector 6144
[53211.141474] Buffer I/O error on device sdf1, logical block 512
[53211.152130] sdf: detected capacity change from 32297189376 to 0
[53223.873835] usb 1-3: USB disconnect, device number 4


lspci

Code: Select all

00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
03:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260] (rev a1)
04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
04:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05)
ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05)
ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05)
ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05)
ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05)
ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05)
ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05)
ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05)
ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05)
ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05)
ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05)
ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05)
ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05)
ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05)
ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05)
ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05)


lsusb

Code: Select all

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 006 Device 002: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
Bus 006 Device 003: ID 0556:0001 Asahi Kasei Microsystems Co., Ltd AK5370 I/F A/D Converter
Bus 008 Device 002: ID 1532:0101 Razer USA, Ltd Copperhead Mouse


[abadonna]

Hi guys,

I was waiting for new kernel (3.3) to be released hoping it will fix my USB 3.0 problem. Today I have upgraded to the latest kernel and... still no USB 3.0.

lsusb shows:

Code: Select all

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 002 Device 005: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 006 Device 002: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
Bus 006 Device 003: ID 0556:0001 Asahi Kasei Microsystems Co., Ltd AK5370 I/F A/D Converter
Bus 008 Device 002: ID 1532:0101 Razer USA, Ltd Copperhead Mouse
Bus 002 Device 006: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 007: ID 0424:4063 Standard Microsystems Corp.


I've checked if xhci_hcd module was loaded... Nope, it wasn't, so:

modprobe xhci_hcd

and lspci -v:

Code: Select all

07:00.0 USB controller: VIA Technologies, Inc. Device 3432 (rev 02) (prog-if 30 [XHCI])
        Subsystem: VIA Technologies, Inc. Device 3432
        Flags: bus master, fast devsel, latency 0, IRQ 69
        Memory at fbeff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [c4] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci-hcd


lsusb:

Code: Select all

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 002 Device 005: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 006 Device 002: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
Bus 006 Device 003: ID 0556:0001 Asahi Kasei Microsystems Co., Ltd AK5370 I/F A/D Converter
Bus 002 Device 006: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 008: ID 0424:4063 Standard Microsystems Corp.
Bus 008 Device 002: ID 1532:0101 Razer USA, Ltd Copperhead Mouse
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 009 Device 002: ID 2109:0811 


lsusb -v:

Code: Select all

Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         3
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            3.03
  iManufacturer           3 Linux 3.3.0-sabayon xhci_hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:07:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             4
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.02a0 5Gbps power Rx.Detect
   Port 3: 0000.02a0 5Gbps power Rx.Detect
   Port 4: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           15
  bNumDeviceCaps          1
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x0008
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   3
      Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat           4 micro seconds
    bU2DevExitLat         231 micro seconds
Device Status:     0x0001
  Self Powered

Bus 009 Device 002: ID 2109:0811


but as you can see there is empty entry "Bus 009 Device 002" and "lsusb -v" hangs here.

When i check
dmesg |grep xhci

Code: Select all

[   14.723825] xhci_hcd 0000:07:00.0: xHCI Host Controller
[   14.724548] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
[   14.724778] xhci_hcd 0000:07:00.0: irq 17, io mem 0xfbeff000
[   14.724841] xhci_hcd 0000:07:00.0: irq 69 for MSI/MSI-X
[   14.724985] usb usb9: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[   14.725169] xHCI xhci_add_endpoint called for root hub
[   14.725171] xHCI xhci_check_bandwidth called for root hub
[   14.725397] xhci_hcd 0000:07:00.0: xHCI Host Controller
[   14.725440] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[   14.725477] usb usb10: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[   14.725665] xHCI xhci_add_endpoint called for root hub
[   14.725668] xHCI xhci_check_bandwidth called for root hub
[   15.026340] usb 9-1: new high-speed USB device number 2 using xhci_hcd
[   15.148509] usb 10-4: new SuperSpeed USB device number 2 using xhci_hcd
[   50.986790] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[   56.175222] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[   61.465327] xhci_hcd 0000:07:00.0: Timeout while waiting for reset device command
[   66.554951] xhci_hcd 0000:07:00.0: Timeout while waiting for reset device command
[   71.644589] xhci_hcd 0000:07:00.0: Timeout while waiting for reset device command
[   71.646125] xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801b40fbf80
[   71.646132] xhci_hcd 0000:07:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801b40fbfc0
[   76.634450] xhci_hcd 0000:07:00.0: Timeout while waiting for a slot
[  192.210414] xhci_hcd 0000:07:00.0: Timeout while waiting for a slot
[  199.539527] xhci_hcd 0000:07:00.0: Timeout while waiting for stop endpoint command
[  199.555477] xhci_hcd 0000:07:00.0: xHCI host not responding to stop endpoint command.
[  199.555481] xhci_hcd 0000:07:00.0: Assuming host is dying, halting host.
[  199.555496] xhci_hcd 0000:07:00.0: HC died; cleaning up
[  482.669848] xhci_hcd 0000:07:00.0: remove, state 4
[  482.669923] xHCI xhci_drop_endpoint called for root hub
[  482.669926] xHCI xhci_check_bandwidth called for root hub
[  482.670226] xhci_hcd 0000:07:00.0: USB bus 10 deregistered
[  482.670304] xhci_hcd 0000:07:00.0: remove, state 1
[  482.670409] xHCI xhci_drop_endpoint called for root hub
[  482.670413] xHCI xhci_check_bandwidth called for root hub
[  482.670646] xhci_hcd 0000:07:00.0: USB bus 9 deregistered
[  488.872105] xhci_hcd 0000:07:00.0: xHCI Host Controller
[  488.872298] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
[  488.872517] xhci_hcd 0000:07:00.0: irq 17, io mem 0xfbeff000
[  488.872581] xhci_hcd 0000:07:00.0: irq 69 for MSI/MSI-X
[  488.872657] usb usb9: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[  488.872799] xHCI xhci_add_endpoint called for root hub
[  488.872802] xHCI xhci_check_bandwidth called for root hub
[  488.881142] xhci_hcd 0000:07:00.0: xHCI Host Controller
[  488.881322] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[  488.881416] usb usb10: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[  488.881598] xHCI xhci_add_endpoint called for root hub
[  488.881602] xHCI xhci_check_bandwidth called for root hub
[  489.173393] usb 9-1: new high-speed USB device number 2 using xhci_hcd
[  527.967168] xhci_hcd 0000:07:00.0: ERROR no room on ep ring


Errors! None of my USB 3.0 device works

I have started to think that my PCIe card is broken. Tried from Windows 7 - works! Must be good then...

Any idea what else could I try to do?

[joeoden]

The mobo I use has 1 usb 3 port built in, I had to add another 2 port usb 3 card for obvious reasons
When I first installed the card only one of the 2 ports would work (but under that other OS all 3 ports worked) not until I read your post which reminded me that my usb 3 ports had a problem

I use the limbo repo for this system so I have the linux-sabayon-3.3 kernel installed on this amd64 kde machine and because of your post I just had to see if I was still having usb 3 problems, I am glad to report that all 3 usb ports are now working

I am not sure if it was the linux-sabayon-3.3 kernel that fixed my problem or if it was a faulty power cable that was connected to the usb 3 card, don't know if your card uses one of the power connectors (mine uses the same as the old 3.5 inch ide hdd) if it does make sure the pins are not loose inside the connector

I noticed that you have a Firewire Controller check to make sure that you do not have any IRQ/bus conflicts with any cards you may have added to your computer (remember just because it works with that other OS doesn't mean it will work with Unix/Linux)

I have noticed that Sabayon_Linux_DAILY_amd64_K.iso (release date Wed Mar 28 09:42:00 CEST 2012) has the linux-sabayon-3.3 kernel just as a suggestion download that image or later and see if you are still having the same issues while running the livedvd

Here is some cml output from my system

Code: Select all

lounge josef # lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
02:00.0 USB controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 01)
03:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
05:06.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster

lounge josef # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c52e Logitech, Inc.
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub                                               
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub                                               
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub                                               
Bus 009 Device 002: ID 1058:1140 Western Digital Technologies, Inc.                                           
Bus 009 Device 003: ID 1058:1130 Western Digital Technologies, Inc.                                           
Bus 011 Device 002: ID 152d:2509 JMicron Technology Corp. / JMicron USA Technology Corp. JMS539 SuperSpeed SATA II 3.0G Bridge
                                                                           
lounge josef # dmesg |grep xhci
[   10.964571] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   10.964644] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[   10.964758] xhci_hcd 0000:04:00.0: irq 16, io mem 0xfebfe000
[   10.964798] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[   10.964802] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[   10.964805] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[   10.964809] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[   10.964812] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[   10.964816] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[   10.964820] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[   10.964912] usb usb8: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[   10.964982] xHCI xhci_add_endpoint called for root hub
[   10.964983] xHCI xhci_check_bandwidth called for root hub
[   10.965117] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   10.965156] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[   10.968220] usb usb9: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[   10.968969] xHCI xhci_add_endpoint called for root hub
[   10.968970] xHCI xhci_check_bandwidth called for root hub
[   10.980427] xhci_hcd 0000:02:00.0: xHCI Host Controller
[   10.980477] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
[   11.095495] xhci_hcd 0000:02:00.0: irq 19, io mem 0xf9ff0000
[   11.095562] usb usb10: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[   11.095695] xHCI xhci_add_endpoint called for root hub
[   11.095697] xHCI xhci_check_bandwidth called for root hub
[   11.095845] xhci_hcd 0000:02:00.0: xHCI Host Controller
[   11.095878] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 11
[   11.095898] usb usb11: Manufacturer: Linux 3.3.0-sabayon xhci_hcd
[   11.095981] xHCI xhci_add_endpoint called for root hub
[   11.095982] xHCI xhci_check_bandwidth called for root hub
[17113.250301] usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd
[17144.884356] usb 9-2: new SuperSpeed USB device number 3 using xhci_hcd
[17422.832174] usb 11-1: new SuperSpeed USB device number 2 using xhci_hcd

lounge josef # modprobe xhci_hcd
lounge josef #

You never reported if your issue with http://forum.sabayon.org/viewtopic.php? ... ek#p146293 was solved or not

[abadonna]

My card does not have separate power socket.

(remember just because it works with that other OS doesn't mean it will work with Unix/Linux)

As I have mentioned before - it used to work with my Sabayon perfectly. The problem appeared after update on Feb 19th. (vide: my previous post you've mentioned).

You never reported if your issue with http://forum.sabayon.org/viewtopic.php? ... ek#p146293 was solved or not

Solved partially with KDE 4.8.1. But only partially.:

I've got the serious problem with KDE 4.8 and USB media (pendrives and external HDDs). When I connect USB pendrive to my computers (those updated to the latest KDE), it crashes KDE 4.8.

Has been solved.

More to it: I've got Astrotek PCI Express VLI USB 3.0 controller in one of my PCs. After the system update (KDE 4.8.0) my controller stopped recognising USB devices (either USB 3.0 or 2.0). Before it worked as a charm.

Still problematic