dopo aver installato Sabayon 8 Gnome 64 bit nel mio portatile, non riesco ad attivare il wifi ("firmware missing" dall'icona di network manager) anche se in teoria, consultando i pacchetti in Entropy, risulterebbe tutto regolarmente installato.
Prima di scrivere ho già provato a cercare la possibile soluzione da post precedenti, dal wiki e ricerche varie, ma senza trovare una soluzione.
Vado nel dettaglio postando lspci e dmesg:
- Code: Select all
fabrizio@sabayon ~ $ sudo lspci
Password:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 320M] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
02:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
- Code: Select all
sabayon fabrizio # dmesg
INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.674639] pci 0000:00:1c.7: setting latency timer to 64
[ 0.674647] pci 0000:00:1e.0: setting latency timer to 64
[ 0.674651] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.674653] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.674655] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.674657] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.674659] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
[ 0.674660] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.674662] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.674664] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.674666] pci_bus 0000:02: resource 1 [mem 0xda100000-0xdb0fffff]
[ 0.674668] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[ 0.674670] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.674672] pci_bus 0000:03: resource 1 [mem 0xd9100000-0xda0fffff]
[ 0.674674] pci_bus 0000:03: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref]
[ 0.674676] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.674678] pci_bus 0000:04: resource 1 [mem 0xd8100000-0xd90fffff]
[ 0.674680] pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[ 0.674682] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.674683] pci_bus 0000:05: resource 1 [mem 0xd7100000-0xd80fffff]
[ 0.674685] pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[ 0.674687] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.674689] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.674691] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.674693] pci_bus 0000:09: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.674724] NET: Registered protocol family 2
[ 0.674828] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.675639] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.678148] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.678446] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.678449] TCP reno registered
[ 0.678459] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.678494] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.678625] NET: Registered protocol family 1
[ 0.700596] pci 0000:01:00.0: Boot video device
[ 0.700660] PCI: CLS 64 bytes, default 64
[ 0.700707] Trying to unpack rootfs image as initramfs...
[ 0.844023] Freeing initrd memory: 8608k freed
[ 0.845848] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.845854] Placing 64MB software IO TLB between ffff8800bb681000 - ffff8800bf681000
[ 0.845856] software IO TLB at phys 0xbb681000 - 0xbf681000
[ 0.845874] Simple Boot Flag at 0x44 set to 0x1
[ 0.847905] audit: initializing netlink socket (disabled)
[ 0.847916] type=2000 audit(1329009215.666:1): initialized
[ 0.856745] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.877870] VFS: Disk quotas dquot_6.5.2
[ 0.877950] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.878046] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.878632] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.878752] QNX4 filesystem 0.2.3 registered.
[ 0.879535] Btrfs loaded
[ 0.879737] aufs 3.x-rcN-20111205
[ 0.879742] msgmni has been set to 7761
[ 0.880162] async_tx: api initialized (async)
[ 0.880286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.880317] io scheduler noop registered
[ 0.880320] io scheduler deadline registered (default)
[ 0.880386] io scheduler cfq registered
[ 0.880679] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.880707] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.881271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.948648] Linux agpgart interface v0.103
[ 0.948881] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 0.948883] vesafb: scrolling: redraw
[ 0.948886] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.950352] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90011100000, using 1536k, total 1536k
[ 0.951916] Console: switching to colour frame buffer device 128x48
[ 0.953416] fb0: VESA VGA frame buffer device
[ 0.953493] intel_idle: MWAIT substates: 0x1120
[ 0.953495] intel_idle: v0.4 model 0x25
[ 0.953496] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.954055] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.954408] ACPI: AC Adapter [ACAD] (on-line)
[ 0.954583] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.954589] ACPI: Power Button [PWRB]
[ 0.954663] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.955055] ACPI: Lid Switch [LID0]
[ 0.955149] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.955152] ACPI: Sleep Button [SLPB]
[ 0.955246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.955250] ACPI: Power Button [PWRF]
[ 0.958479] [Firmware Bug]: Invalid critical threshold (0)
[ 0.960040] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.960043] ACPI: Thermal Zone [TZ01] (41 C)
[ 0.960175] ERST: Table is not found!
[ 0.960177] GHES: HEST is not enabled!
[ 0.960372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.960380] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.962498] brd: module loaded
[ 0.963684] loop: module loaded
[ 0.963686] Compaq SMART2 Driver (v 2.6.0)
[ 0.963779] HP CISS Driver (v 3.6.26)
[ 0.964181] MM: desc_per_page = 128
[ 0.964418] Loading iSCSI transport class v2.0-870.
[ 0.964907] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
[ 0.965249] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 0.965250] Detecting Adaptec I2O RAID controllers...
[ 0.965397] Adaptec aacraid driver 1.1-7[28000]-ms
[ 0.965498] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 0.965596] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0
[ 0.965768] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
[ 0.965861] iscsi: registered transport (qla4xxx)
[ 0.965904] QLogic iSCSI HBA Driver
[ 0.965906] Emulex LightPulse Fibre Channel SCSI driver 8.3.27
[ 0.965907] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 0.966142] DC390: clustering now enabled by default. If you get problems load
[ 0.966144] with "disable_clustering=1" and report to maintainers
[ 0.966232] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 0.966295] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 0.966342] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[ 0.966395] mpt2sas version 10.100.00.00 loaded
[ 0.966538] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 0.966661] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 0.966707] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 0.966749] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 0.966792] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
[ 0.966842] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 0.966887] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 0.966981] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 0.966984] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[ 0.966986] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[ 0.967050] iscsi: registered transport (cxgb3i)
[ 0.967052] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[ 0.967095] iscsi: registered transport (cxgb4i)
[ 0.967097] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
[ 0.967143] iscsi: registered transport (bnx2i)
[ 0.967225] VMware PVSCSI driver - version 1.0.1.0-k
[ 0.967270] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 0.967345] osst :I: Tape driver with OnStream support version 0.99.4
[ 0.967346] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 0.967585] ahci 0000:00:1f.2: version 3.0
[ 0.967606] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.967661] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.967751] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 0.967754] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 0.967760] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.974035] scsi0 : ahci
[ 0.974178] scsi1 : ahci
[ 0.974305] scsi2 : ahci
[ 0.974426] scsi3 : ahci
[ 0.974551] scsi4 : ahci
[ 0.974677] scsi5 : ahci
[ 0.974784] ata1: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105100 irq 41
[ 0.974788] ata2: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105180 irq 41
[ 0.974789] ata3: DUMMY
[ 0.974790] ata4: DUMMY
[ 0.974793] ata5: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105300 irq 41
[ 0.974797] ata6: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105380 irq 41
[ 0.977933] Fixed MDIO Bus: probed
[ 0.977996] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[ 0.978170] I2O subsystem v1.325
[ 0.978171] i2o: max drivers = 8
[ 0.978318] I2O Configuration OSM v1.323
[ 0.978425] I2O Bus Adapter OSM v1.317
[ 0.978462] I2O Block Device OSM v1.325
[ 0.978598] I2O SCSI Peripheral OSM v1.316
[ 0.978638] I2O ProcFS OSM v1.316
[ 0.978678] Fusion MPT base driver 3.04.20
[ 0.978679] Copyright (c) 1999-2008 LSI Corporation
[ 0.978683] Fusion MPT SPI Host driver 3.04.20
[ 0.978733] Fusion MPT FC Host driver 3.04.20
[ 0.978782] Fusion MPT SAS Host driver 3.04.20
[ 0.978835] Fusion MPT misc device (ioctl) driver 3.04.20
[ 0.978894] mptctl: Registered with Fusion MPT base driver
[ 0.978896] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 0.978898] Fusion MPT LAN driver 3.04.20
[ 0.979058] Initializing USB Mass Storage driver...
[ 0.979102] usbcore: registered new interface driver usb-storage
[ 0.979103] USB Mass Storage support registered.
[ 0.979148] usbcore: registered new interface driver libusual
[ 0.979191] usbcore: registered new interface driver ums-alauda
[ 0.979233] usbcore: registered new interface driver ums-cypress
[ 0.979272] usbcore: registered new interface driver ums-datafab
[ 0.979311] usbcore: registered new interface driver ums-freecom
[ 0.979353] usbcore: registered new interface driver ums-isd200
[ 0.979392] usbcore: registered new interface driver ums-jumpshot
[ 0.979432] usbcore: registered new interface driver ums-karma
[ 0.979470] usbcore: registered new interface driver ums-onetouch
[ 0.979511] usbcore: registered new interface driver ums-sddr09
[ 0.979551] usbcore: registered new interface driver ums-sddr55
[ 0.979590] usbcore: registered new interface driver ums-usbat
[ 0.979695] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.002377] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.002384] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.002722] mousedev: PS/2 mouse device common for all mice
[ 1.004617] rtc_cmos 00:07: RTC can wake from S4
[ 1.004766] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.004798] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.004838] md: linear personality registered for level -1
[ 1.004840] md: raid0 personality registered for level 0
[ 1.004842] md: raid1 personality registered for level 1
[ 1.004844] md: raid10 personality registered for level 10
[ 1.004845] md: raid6 personality registered for level 6
[ 1.004847] md: raid5 personality registered for level 5
[ 1.004848] md: raid4 personality registered for level 4
[ 1.004850] md: multipath personality registered for level -4
[ 1.004851] md: faulty personality registered for level -5
[ 1.005318] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.006094] cpuidle: using governor ladder
[ 1.007191] cpuidle: using governor menu
[ 1.007304] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.008776] usbcore: registered new interface driver usbhid
[ 1.008778] usbhid: USB HID core driver
[ 1.008837] TCP bic registered
[ 1.008840] NET: Registered protocol family 17
[ 1.008892] Registering the dns_resolver key type
[ 1.011733] fbcondecor: console 0 using theme 'sabayon'
[ 1.025919] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.054803] fbcondecor: switched decor state to 'on' on console 0
[ 1.278524] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.278567] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.279494] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.279514] ata1.00: ATA-8: Hitachi HTS725032A9A364, PC3OC72E, max UDMA/100
[ 1.279520] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.280435] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.280719] ata1.00: configured for UDMA/100
[ 1.281061] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 PC3O PQ: 0 ANSI: 5
[ 1.281842] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.282016] sd 0:0:0:0: [sda] Write Protect is off
[ 1.282022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.282074] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.282085] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.291664] ata2.00: ATAPI: hp DVD RW AD-7586H, KH03, max UDMA/100
[ 1.304634] ata2.00: configured for UDMA/100
[ 1.307863] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7586H KH03 PQ: 0 ANSI: 5
[ 1.316778] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.316784] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.317258] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.317634] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.369550] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.371092] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.846390] Refined TSC clocksource calibration: 2260.999 MHz.
[ 1.846397] Switching to clocksource tsc
[ 2.043441] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 2.127196] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.133239] registered taskstats version 1
[ 2.142551] rtc_cmos 00:07: setting system clock to 2012-02-12 01:13:37 UTC (1329009217)
[ 2.144315] Freeing unused kernel memory: 592k freed
[ 2.481815] scsi6 : pata_legacy
[ 2.481968] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 2.634376] scsi7 : pata_legacy
[ 2.634516] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.914801] scsi: <fdomain> Detection failed (no card)
[ 2.970526] imm: Version 2.05 (for Linux 2.4.0)
[ 3.049215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.049270] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.049324] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.049328] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.049522] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.049572] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.053459] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.053478] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdb105c00
[ 3.062887] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.062935] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.062940] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.062944] usb usb1: Product: EHCI Host Controller
[ 3.062947] usb usb1: Manufacturer: Linux 3.2.0-sabayon ehci_hcd
[ 3.062951] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.063380] hub 1-0:1.0: USB hub found
[ 3.063387] hub 1-0:1.0: 3 ports detected
[ 3.063586] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.063600] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.063604] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.063692] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.063723] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.067612] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.067628] ehci_hcd 0000:00:1d.0: irq 21, io mem 0xdb105800
[ 3.076867] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.076894] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.076899] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.076903] usb usb2: Product: EHCI Host Controller
[ 3.076907] usb usb2: Manufacturer: Linux 3.2.0-sabayon ehci_hcd
[ 3.076911] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.077363] hub 2-0:1.0: USB hub found
[ 3.077369] hub 2-0:1.0: 3 ports detected
[ 3.100766] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.119117] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.139327] sl811: driver sl811-hcd, 19 May 2005
[ 3.356311] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3.364268] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.404129] RPC: Registered named UNIX socket transport module.
[ 3.404132] RPC: Registered udp transport module.
[ 3.404134] RPC: Registered tcp transport module.
[ 3.404136] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.457958] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.458964] SGI XFS Quota Management subsystem
[ 3.479338] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.479343] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.479679] hub 1-1:1.0: USB hub found
[ 3.479824] hub 1-1:1.0: 6 ports detected
[ 3.482023] fuse init (API version 7.17)
[ 3.507304] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.507309] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.564197] iscsi: registered transport (tcp)
[ 3.581824] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.695909] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.695913] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.696232] hub 2-1:1.0: USB hub found
[ 3.696269] hub 2-1:1.0: 8 ports detected
[ 3.767538] mdadm: sending ioctl 1261 to a partition!
[ 3.767544] mdadm: sending ioctl 1261 to a partition!
[ 3.782110] mdadm: sending ioctl 1261 to a partition!
[ 3.782115] mdadm: sending ioctl 1261 to a partition!
[ 3.782728] mdadm: sending ioctl 1261 to a partition!
[ 3.782733] mdadm: sending ioctl 1261 to a partition!
[ 3.800596] mdadm: sending ioctl 1261 to a partition!
[ 3.800601] mdadm: sending ioctl 1261 to a partition!
[ 3.800778] mdadm: sending ioctl 800c0910 to a partition!
[ 3.800783] mdadm: sending ioctl 800c0910 to a partition!
[ 3.970147] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.089831] usb 2-1.5: New USB device found, idVendor=064e, idProduct=a127
[ 4.089837] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 4.089842] usb 2-1.5: Product: HP Webcam
[ 4.089845] usb 2-1.5: Manufacturer: SuYin
[ 4.089849] usb 2-1.5: SerialNumber: CN0316-S30C-OV10-VH-R02.01.00
[ 4.170471] PM: Starting manual resume from disk
[ 4.265807] VFS: could not find a valid V7 on sda5.
[ 4.297102] UDF-fs: warning (device sda5): udf_fill_super: No partition found (1)
[ 4.300834] EXT2-fs (sda5): error: couldn't mount because of unsupported optional features (240)
[ 4.304644] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
[ 4.346021] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.279813] udevd[5445]: starting version 171
[ 7.245341] iTCO_vendor_support: vendor-support=0
[ 7.278491] acpi device:11: registered as cooling_device4
[ 7.278718] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/LNXVIDEO:02/input/input6
[ 7.279372] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.279495] iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460)
[ 7.279684] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 7.279700] intel ips 0000:00:1f.6: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.279740] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 7.279787] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 7.279811] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.279957] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 7.280195] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 7.305325] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.305337] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64
[ 7.305416] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 7.305450] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 7.305526] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 7.315700] bcma: Bus registered
[ 7.406719] IR NEC protocol handler initialized
[ 7.426936] IR RC5(x) protocol handler initialized
[ 7.445618] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 7.453987] firewire_ohci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.453998] firewire_ohci 0000:04:00.0: setting latency timer to 64
[ 7.465300] IR RC6 protocol handler initialized
[ 7.465319] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.465325] ACPI: resource 0000:00:1f.3 [io 0x7000-0x701f] conflicts with ACPI region SMBI [io 0x7000-0x700f]
[ 7.465328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.465528] Linux media interface: v0.10
[ 7.491011] IR JVC protocol handler initialized
[ 7.491146] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[ 7.491148] ene_ir: PLL freq = 1406
[ 7.491149] ene_ir: KB3926D or higher detected
[ 7.491165] ene_ir: Firmware regs: c0 01
[ 7.491166] ene_ir: Hardware features:
[ 7.491167] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 7.500505] hp_accel: laptop model unknown, using default axes configuration
[ 7.501095] lis3lv02d: 8 bits sensor found
[ 7.506075] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x10
[ 7.525455] IR Sony protocol handler initialized
[ 7.537102] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[ 7.537327] Registered led device: hp::hddprotect
[ 7.537342] hp_accel: driver loaded
[ 7.543773] lib80211: common routines for IEEE802.11 drivers
[ 7.543775] lib80211_crypt: registered algorithm 'NULL'
[ 7.550141] IR MCE Keyboard/mouse protocol handler initialized
[ 7.591352] sdhci: Secure Digital Host Controller Interface driver
[ 7.591354] sdhci: Copyright(c) Pierre Ossman
[ 7.611724] jmb38x_ms 0000:04:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.611732] jmb38x_ms 0000:04:00.3: setting latency timer to 64
[ 7.625875] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.625901] cfg80211: Calling CRDA to update world regulatory domain
[ 7.625907] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.625981] r8169 0000:03:00.0: setting latency timer to 64
[ 7.626179] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 7.626374] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90000672000, 00:26:9e:f7:d0:71, XID 083000c0 IRQ 42
[ 7.626378] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 7.634069] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 7.634092] sdhci-pci 0000:04:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.634174] sdhci-pci 0000:04:00.1: setting latency timer to 64
[ 7.634193] mmc0: no vmmc regulator found
[ 7.634230] Registered led device: mmc0::
[ 7.636788] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[ 7.636808] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 7.636829] sdhci-pci 0000:04:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.636838] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[ 7.636848] sdhci-pci 0000:04:00.2: PCI INT A disabled
[ 7.642028] lirc_dev: IR Remote Control driver registered, major 242
[ 7.667936] IR LIRC bridge handler initialized
[ 7.695681] Registered IR keymap rc-rc6-mce
[ 7.695864] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[ 7.695971] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 7.696071] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input11
[ 7.696239] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 7.696243] ene_ir: driver has been successfully loaded
[ 7.712698] Linux video capture interface: v2.00
[ 7.805948] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a127)
[ 7.822893] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12
[ 7.823026] usbcore: registered new interface driver uvcvideo
[ 7.823033] USB Video Class driver (1.1.1)
[ 7.872459] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.961645] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.961737] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 7.961766] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.006308] firewire_core: created device fw0: GUID 00241b00a750be01, S400
[ 8.077706] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[ 8.083168] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.083308] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.083605] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.083608] hda_intel: Disabling MSI
[ 8.083656] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 8.425024] Disabling lock debugging due to kernel taint
[ 8.425031] wl: module license 'MIXED/Proprietary' taints kernel.
[ 8.439210] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.451195] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.463166] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.475131] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.481310] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 8.481445] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 8.481533] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 8.481616] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 8.940876] b43-phy0: Broadcom 43225 WLAN found (core revision 23)
[ 8.941551] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.941684] Broadcom 43xx driver loaded [ Features: PMNL ]
[ 9.875168] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 9.875176] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 9.875185] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.875196] nvidia 0000:01:00.0: setting latency timer to 64
[ 9.875201] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.875352] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 14.120916] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 15.875648] fbcondecor: console 1 using theme 'sabayon'
[ 15.928164] fbcondecor: switched decor state to 'on' on console 1
[ 15.982629] fbcondecor: console 2 using theme 'sabayon'
[ 16.035442] fbcondecor: switched decor state to 'on' on console 2
[ 16.089493] fbcondecor: console 3 using theme 'sabayon'
[ 16.141914] fbcondecor: switched decor state to 'on' on console 3
[ 16.196706] fbcondecor: console 4 using theme 'sabayon'
[ 16.248917] fbcondecor: switched decor state to 'on' on console 4
[ 16.302853] fbcondecor: console 5 using theme 'sabayon'
[ 16.355191] fbcondecor: switched decor state to 'on' on console 5
[ 16.409123] fbcondecor: console 6 using theme 'sabayon'
[ 16.461471] fbcondecor: switched decor state to 'on' on console 6
[ 16.515446] fbcondecor: console 7 using theme 'sabayon'
[ 16.567780] fbcondecor: switched decor state to 'on' on console 7
[ 16.621602] fbcondecor: console 8 using theme 'sabayon'
[ 16.674029] fbcondecor: switched decor state to 'on' on console 8
[ 16.727869] fbcondecor: console 9 using theme 'sabayon'
[ 16.780317] fbcondecor: switched decor state to 'on' on console 9
[ 16.834139] fbcondecor: console 10 using theme 'sabayon'
[ 16.886605] fbcondecor: switched decor state to 'on' on console 10
[ 16.940624] fbcondecor: console 11 using theme 'sabayon'
[ 16.992932] fbcondecor: switched decor state to 'on' on console 11
[ 21.153824] fbcondecor: switched decor state to 'off' on console 6
[ 21.504923] fbcondecor: console 6 using theme 'sabayon'
[ 21.505981] fbcondecor: switched decor state to 'on' on console 6
[ 21.666964] b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
[ 21.666967] b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not found
[ 21.666971] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 21.783966] r8169 0000:03:00.0: eth0: link down
[ 21.783986] r8169 0000:03:00.0: eth0: link down
[ 21.991457] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.009131] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 22.028280] NET: Registered protocol family 10
[ 22.028510] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.030881] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 23.026592] Adding 4192928k swap on /dev/sda6. Priority:-1 extents:1 across:4192928k
[ 23.426041] r8169 0000:03:00.0: eth0: link up
[ 23.426379] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.544510] ata1.00: configured for UDMA/100
[ 28.544518] ata1: EH complete
[ 29.056080] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 33.517433] eth0: no IPv6 routers present
[ 87.405125] gksudo[8143]: segfault at 480 ip 00007f6129b0ecd0 sp 00007fff2af52210 error 4 in libgdk-x11-2.0.so.0.2400.7[7f6129ae9000+af000]
sabayon fabrizio #
Ora analizzando il responso di dmesg sembrerebbe che un problema ci sia qui:
[ 21.666964] b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
[ 21.666967] b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not found
[ 21.666971] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Dri ... cefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
e ho provato quindi a seguire le istruzioni del link riportato.
Tuttavia, dando un'occhiata ai pacchetti installati con Sulfur risultano regolarmente installati di default, tra gli altri, i pacchetti bcm43xx-firmware-firmware-4319-r1 e bcm43xx-fwcutter-006 e soprattutto il pacchetto broadcom-sta-5.100.82.112-r2#3.2.0-sabayon, che dovrebbe sgombrare il campo da ogni dubbio...
ma ritornando alle istruzioni del link http://wireless.kernel.org/en/users/Drivers/b43#other_distros sembrerebbe esserci un driver Broadcom 5.100.138 che presumo sia superiore a quello installato, ma non sono riuscito ad installarlo incartandomi nell'ultimo passaggio dell'estrazione del firmware... Tra l'altro mi sembra strano che il pacchetto installato (5.100.82.112) non sia giusto visto che è specificato essere compatibile al kernel in uso.
Non so se sono arrivato vicino al dunque o se sono fuori strada, ma spero che le informazioni che ho fornito siano esaurienti.
Grazie in anticipo per un aiuto alla soluzione di questo problema snervante.