Black Screen after boot of Sabayon Linux 7

[cchalc]

I am having trouble with the installation of Sabayon 7. I have tried installing both the XFCE and GNOME editions from the liveCD but both yield the same result...a black screen. I am able to see the cursor but can do nothing.
When I boot from the LiveCD it worked to XFCE but did not when I tried GNOME.

I have tried doing a full update.
I have tried

Code: Select all

equo install nvidia-drivers

I have also tried updating the kernel to 3.1 from 3.0


ISO: Sabayon_Linux_7_x86_G.iso
ISO: Sabayon_Linux_7_x86_Xfce.iso
both MD5 verified

I have a DELL Studio XPS 1340.

Hardware - /proc/cpuinfo:

Code: Select all

processor   : 0
vendor_id   : GenuineIntel
cpu family   : 6
model      : 23
model name   : Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz
stepping   : 10
cpu MHz      : 1600.000
cache size   : 3072 KB
physical id   : 0
siblings   : 2
core id      : 0
cpu cores   : 2
apicid      : 0
initial apicid   : 0
fpu      : yes
fpu_exception   : yes
cpuid level   : 13
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dts tpr_shadow vnmi flexpriority
bogomips   : 5066.30
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 1
vendor_id   : GenuineIntel
cpu family   : 6
model      : 23
model name   : Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz
stepping   : 10
cpu MHz      : 1600.000
cache size   : 3072 KB
physical id   : 0
siblings   : 2
core id      : 1
cpu cores   : 2
apicid      : 1
initial apicid   : 1
fpu      : yes
fpu_exception   : yes
cpuid level   : 13
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dts tpr_shadow vnmi flexpriority
bogomips   : 5066.57
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:


lspci :

Code: Select all

00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
00:0b.0 SATA controller: nVidia Corporation MCP79 AHCI Controller (rev b1)
00:0c.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:17.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:18.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
01:07.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:07.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:07.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:07.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9200M GS] (rev a1)
03:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9400M G] (rev b1)
06:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)


[genfool]

I think the issue is here, hope someone else can figure it out.... should work out of the box like other linux distros ... gentoo, ubuntu etc... but not sabayon.

02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9200M GS] (rev a1)
03:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9400M G] (rev b1)

[lxnay]

I've read of a bug fixed in the latest nvidia-drivers 290.10.
You're complaining about X not working and yet you haven't provided any useful log? (dmesg output and /var/log/Xorg.0.log)

[genfool]

cchalc, if I remember correctly I helped you with this in irc with this and asked you to post here so others could see the logs and help. Forgive me if this is not you, is someone with same video card setup.
Would be good to show the logs lxnay asked for. Sabayon has a tool called cookbug In a root terminal

Code: Select all

cookbug

Will package all logs in one file you could post here.

I looked at Xorg.0.log and was perfect for nvidia, only error was dri
dmesg showed nothing out of the ordinary except it looked like both cards were trying to share same irq post that log!
Live cd works perfect, once installed was a black screen. We tried everything except get drivers from nvidia.
Completely updated fresh install, equo deptest && equo libtest
booted live and cp the working xorg.conf to the installed system, re-installed xorg-server, nvidia-drivers, re-installed with 3 versions of sabayon 7, I really cant remember everything we tried last week... I worked with him for 3 days on this issue, 2 days in a pm as not to flood the main channel.
linux mint installs and works fine, I am convinced it is some sort of bug. and lxnay is on right track.

The reason why I continued to work with cchalc is because he is intelligent, follows directions, is eager to learn.
Out of the 3 days it took two days to convince him to make his first forum post.
Is a sabayon/nvidia bug and short of going outside of entropy is nothing I could help with.

POST THE LOGS!

[cchalc]

Here is the dmesg:

Code: Select all

mem 0xd0000000-0xdfffffff 64bit pref]
[    0.317751] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.317753] pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
[    0.317755] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
[    0.317758] pci_bus 0000:04: resource 0 [io  0x6000-0x6fff]
[    0.317760] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
[    0.317762] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.317764] pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.317794] NET: Registered protocol family 2
[    0.317900] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.318866] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.322860] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.323370] TCP: Hash tables configured (established 524288 bind 65536)
[    0.323372] TCP reno registered
[    0.323382] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.323420] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.323553] NET: Registered protocol family 1
[    0.425264] pci 0000:03:00.0: Boot video device
[    0.425274] PCI: CLS 64 bytes, default 64
[    0.425318] Trying to unpack rootfs image as initramfs...
[    0.579217] Freeing initrd memory: 12132k freed
[    0.584031] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.584036] Placing 64MB software IO TLB between ffff88008bebb000 - ffff88008febb000
[    0.584038] software IO TLB at phys 0x8bebb000 - 0x8febb000
[    0.584062] Simple Boot Flag at 0x36 set to 0x1
[    0.585278] audit: initializing netlink socket (disabled)
[    0.585291] type=2000 audit(1322084026.584:1): initialized
[    0.595247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.617518] VFS: Disk quotas dquot_6.5.2
[    0.617590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.617669] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.618392] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.618492] QNX4 filesystem 0.2.3 registered.
[    0.619276] Btrfs loaded
[    0.619445] aufs 2.1-standalone.tree-3.0-rcN-20110718
[    0.619449] msgmni has been set to 7414
[    0.619784] async_tx: api initialized (async)
[    0.619880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.619904] io scheduler noop registered
[    0.619906] io scheduler deadline registered
[    0.619970] io scheduler cfq registered (default)
[    0.620955] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.655501] Linux agpgart interface v0.103
[    0.655709] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    0.655711] vesafb: scrolling: redraw
[    0.655714] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.655908] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90001900000, using 1536k, total 1536k
[    0.665118] Console: switching to colour frame buffer device 128x48
[    0.674306] fb0: VESA VGA frame buffer device
[    0.674350] intel_idle: MWAIT substates: 0x3122220
[    0.674352] intel_idle: does not run on family 6 model 23
[    0.678036] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.682057] ACPI: AC Adapter [ADP0] (on-line)
[    0.682191] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.682195] ACPI: Power Button [PWRB]
[    0.682264] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/PNP0C0E:00/input/input1
[    0.682267] ACPI: Sleep Button [SLPB]
[    0.682336] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.690032] ACPI: Lid Switch [LID]
[    0.690104] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.690107] ACPI: Power Button [PWRF]
[    0.690182] ACPI: acpi_idle registered with cpuidle
[    0.698010] Monitor-Mwait will be used to enter C-1 state
[    0.698027] Monitor-Mwait will be used to enter C-2 state
[    0.705009] Monitor-Mwait will be used to enter C-3 state
[    0.705019] Marking TSC unstable due to TSC halts in idle
[    0.735039] thermal LNXTHERM:00: registered as thermal_zone0
[    0.735042] ACPI: Thermal Zone [THRM] (74 C)
[    0.735075] ERST: Table is not found!
[    0.736711] fbcondecor: console 0 using theme 'sabayon'
[    0.740626] brd: module loaded
[    0.741422] loop: module loaded
[    0.741423] Compaq SMART2 Driver (v 2.6.0)
[    0.741503] HP CISS Driver (v 3.6.26)
[    0.741792] MM: desc_per_page = 128
[    0.741979] Loading iSCSI transport class v2.0-870.
[    0.742405] fnic: Cisco FCoE HBA Driver, ver 1.5.0.1
[    0.742627] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    0.742629] Detecting Adaptec I2O RAID controllers...
[    0.742747] Adaptec aacraid driver 1.1-7[28000]-ms
[    0.742875] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    0.742961] isci: Intel(R) C600 SAS Controller Driver
[    0.743157] QLogic Fibre Channel HBA Driver: 8.03.07.03-k
[    0.743234] iscsi: registered transport (qla4xxx)
[    0.743267] QLogic iSCSI HBA Driver
[    0.743269] Emulex LightPulse Fibre Channel SCSI driver 8.3.23
[    0.743270] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    0.743443] DC390: clustering now enabled by default. If you get problems load
[    0.743445]        with "disable_clustering=1" and report to maintainers
[    0.743519] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    0.743559] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    0.743596] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
[    0.743640] mpt2sas version 08.100.00.02 loaded
[    0.743746] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    0.743844] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    0.743878] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    0.743915] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    0.743948] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
[    0.743983] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    0.755075] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    0.755158] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[    0.755160] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[    0.755162] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[    0.755198] iscsi: registered transport (cxgb3i)
[    0.755201] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[    0.755233] iscsi: registered transport (cxgb4i)
[    0.755236] Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010)
[    0.755270] iscsi: registered transport (bnx2i)
[    0.755272] VMware PVSCSI driver - version 1.0.1.0-k
[    0.755308] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.755364] osst :I: Tape driver with OnStream support version 0.99.4
[    0.755365] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    0.755554] ahci 0000:00:0b.0: version 3.0
[    0.755713] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[    0.755726] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
[    0.755774] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[    0.755780] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    0.755837] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.755841] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs boh
[    0.755844] ahci 0000:00:0b.0: setting latency timer to 64
[    0.757031] scsi0 : ahci
[    0.757150] scsi1 : ahci
[    0.757242] scsi2 : ahci
[    0.757337] scsi3 : ahci
[    0.757426] scsi4 : ahci
[    0.757518] scsi5 : ahci
[    0.757680] ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
[    0.757683] ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
[    0.757685] ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
[    0.757688] ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
[    0.757690] ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
[    0.757692] ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
[    0.760262] Fixed MDIO Bus: probed
[    0.760372] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
[    0.760433] I2O subsystem v1.325
[    0.760435] i2o: max drivers = 8
[    0.760543] I2O Configuration OSM v1.323
[    0.760628] I2O Bus Adapter OSM v1.317
[    0.760659] I2O Block Device OSM v1.325
[    0.760775] I2O SCSI Peripheral OSM v1.316
[    0.760808] I2O ProcFS OSM v1.316
[    0.760841] Fusion MPT base driver 3.04.19
[    0.760843] Copyright (c) 1999-2008 LSI Corporation
[    0.760847] Fusion MPT SPI Host driver 3.04.19
[    0.760887] Fusion MPT FC Host driver 3.04.19
[    0.760928] Fusion MPT SAS Host driver 3.04.19
[    0.760974] Fusion MPT misc device (ioctl) driver 3.04.19
[    0.761105] mptctl: Registered with Fusion MPT base driver
[    0.761108] mptctl: /dev/mptctl @ (major,minor=10,220)
[    0.761109] Fusion MPT LAN driver 3.04.19
[    0.761216] Initializing USB Mass Storage driver...
[    0.761250] usbcore: registered new interface driver usb-storage
[    0.761252] USB Mass Storage support registered.
[    0.761284] usbcore: registered new interface driver libusual
[    0.761318] usbcore: registered new interface driver ums-alauda
[    0.761348] usbcore: registered new interface driver ums-cypress
[    0.761377] usbcore: registered new interface driver ums-datafab
[    0.761407] usbcore: registered new interface driver ums-freecom
[    0.761437] usbcore: registered new interface driver ums-isd200
[    0.761466] usbcore: registered new interface driver ums-jumpshot
[    0.761496] usbcore: registered new interface driver ums-karma
[    0.761525] usbcore: registered new interface driver ums-onetouch
[    0.761554] usbcore: registered new interface driver ums-sddr09
[    0.761587] usbcore: registered new interface driver ums-sddr55
[    0.761616] usbcore: registered new interface driver ums-usbat
[    0.761703] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.766379] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766385] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.766646] mousedev: PS/2 mouse device common for all mice
[    0.767136] rtc_cmos 00:0a: RTC can wake from S4
[    0.767335] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[    0.767391] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.767421] md: linear personality registered for level -1
[    0.767423] md: raid0 personality registered for level 0
[    0.767425] md: raid1 personality registered for level 1
[    0.767426] md: raid10 personality registered for level 10
[    0.767428] md: raid6 personality registered for level 6
[    0.767430] md: raid5 personality registered for level 5
[    0.767431] md: raid4 personality registered for level 4
[    0.767433] md: multipath personality registered for level -4
[    0.767435] md: faulty personality registered for level -5
[    0.767620] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.767983] cpuidle: using governor ladder
[    0.768447] cpuidle: using governor menu
[    0.768518] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    0.769438] usbcore: registered new interface driver usbhid
[    0.769440] usbhid: USB HID core driver
[    0.769601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.769724] TCP bic registered
[    0.769727] NET: Registered protocol family 17
[    0.769951] Registering the dns_resolver key type
[    0.786063] fbcondecor: switched decor state to 'on' on console 0
[    1.038308] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.038314] ACPI: Battery Slot [BAT0] (battery present)
[    1.062094] ata3: SATA link down (SStatus 0 SControl 300)
[    1.062119] ata6: SATA link down (SStatus 0 SControl 300)
[    1.062134] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.062149] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.062161] ata4: SATA link down (SStatus 0 SControl 300)
[    1.062173] ata5: SATA link down (SStatus 0 SControl 300)
[    1.063809] ata1.00: ATA-8: ST9500325AS, 0003DEM1, max UDMA/133
[    1.063813] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.065814] ata1.00: configured for UDMA/133
[    1.065976] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0003 PQ: 0 ANSI: 5
[    1.066287] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.066326] sd 0:0:0:0: [sda] Write Protect is off
[    1.066328] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.066346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.066349] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.078519] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-D633A, D300, max UDMA/100
[    1.078523] ata2.00: applying bridge limits
[    1.094130] ata2.00: configured for UDMA/100
[    1.096096] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-D633A D300 PQ: 0 ANSI: 5
[    1.101578] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.101582] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.101785] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.101906] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.131614]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.132231] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.581390] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[    1.627866] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    1.631958] registered taskstats version 1
[    1.642043] rtc_cmos 00:0a: setting system clock to 2011-11-23 21:33:48 UTC (1322084028)
[    1.642607] Freeing unused kernel memory: 604k freed
[    1.988725] scsi6 : pata_legacy
[    1.988910] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    2.140466] scsi7 : pata_legacy
[    2.140648] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    2.400455] scsi: <fdomain> Detection failed (no card)
[    2.448050] imm: Version 2.05 (for Linux 2.4.0)
[    2.514146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.514346] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[    2.514352] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[    2.514380] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    2.514383] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    2.514506] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    2.514529] ehci_hcd 0000:00:04.1: debug port 1
[    2.514537] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    2.514555] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0889000
[    2.520145] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    2.520169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.520173] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.520176] usb usb1: Product: EHCI Host Controller
[    2.520179] usb usb1: Manufacturer: Linux 3.0.0-sabayon ehci_hcd
[    2.520182] usb usb1: SerialNumber: 0000:00:04.1
[    2.520379] hub 1-0:1.0: USB hub found
[    2.520382] hub 1-0:1.0: 4 ports detected
[    2.520645] ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 22
[    2.520649] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 22 (level, low) -> IRQ 22
[    2.520659] ehci_hcd 0000:00:06.1: setting latency timer to 64
[    2.520661] ehci_hcd 0000:00:06.1: EHCI Host Controller
[    2.520736] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[    2.520754] ehci_hcd 0000:00:06.1: debug port 1
[    2.520761] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[    2.520775] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf0889400
[    2.526145] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    2.526164] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.526168] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.526171] usb usb2: Product: EHCI Host Controller
[    2.526174] usb usb2: Manufacturer: Linux 3.0.0-sabayon ehci_hcd
[    2.526177] usb usb2: SerialNumber: 0000:00:06.1
[    2.526357] hub 2-0:1.0: USB hub found
[    2.526361] hub 2-0:1.0: 3 ports detected
[    2.546309] uhci_hcd: USB Universal Host Controller Interface driver
[    2.561117] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.561307] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
[    2.561313] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
[    2.561339] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    2.561342] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    2.561455] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[    2.561482] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf0886000
[    2.614163] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.614165] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.614168] usb usb3: Product: OHCI Host Controller
[    2.614169] usb usb3: Manufacturer: Linux 3.0.0-sabayon ohci_hcd
[    2.614171] usb usb3: SerialNumber: 0000:00:04.0
[    2.614351] hub 3-0:1.0: USB hub found
[    2.614357] hub 3-0:1.0: 4 ports detected
[    2.614633] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20
[    2.614637] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[    2.614648] ohci_hcd 0000:00:06.0: setting latency timer to 64
[    2.614650] ohci_hcd 0000:00:06.0: OHCI Host Controller
[    2.614726] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[    2.614748] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf0887000
[    2.667059] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.667061] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.667063] usb usb4: Product: OHCI Host Controller
[    2.667065] usb usb4: Manufacturer: Linux 3.0.0-sabayon ohci_hcd
[    2.667067] usb usb4: SerialNumber: 0000:00:06.0
[    2.667238] hub 4-0:1.0: USB hub found
[    2.667244] hub 4-0:1.0: 3 ports detected
[    2.683866] sl811: driver sl811-hcd, 19 May 2005
[    2.863264] JFS: nTxBlock = 8192, nTxLock = 65536
[    2.905389] RPC: Registered named UNIX socket transport module.
[    2.905392] RPC: Registered udp transport module.
[    2.905394] RPC: Registered tcp transport module.
[    2.905395] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.924029] usb 2-3: new high speed USB device number 2 using ehci_hcd
[    2.952408] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    2.953373] SGI XFS Quota Management subsystem
[    2.972790] fuse init (API version 7.16)
[    2.992978] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    2.992981] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.035219] iscsi: registered transport (tcp)
[    3.047927] usb 2-3: New USB device found, idVendor=05ca, idProduct=18a0
[    3.047930] usb 2-3: New USB device strings: Mfr=9, Product=2, SerialNumber=0
[    3.047933] usb 2-3: Product: Integrated Webcam
[    3.047934] usb 2-3: Manufacturer: CN0TX61372487956A81T
[    3.311029] usb 3-4: new full speed USB device number 2 using ohci_hcd
[    3.508174] usb 3-4: New USB device found, idVendor=0a5c, idProduct=4500
[    3.508179] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.508182] usb 3-4: Product: BCM2046B1
[    3.508185] usb 3-4: Manufacturer: Broadcom
[    3.511273] hub 3-4:1.0: USB hub found
[    3.514169] hub 3-4:1.0: 3 ports detected
[    3.533211] PM: Starting manual resume from disk
[    3.681755] VFS: could not find a valid V7 on sda1.
[    3.810174] usb 3-4.1: new full speed USB device number 3 using ohci_hcd
[    3.833458] UDF-fs: No partition found (1)
[    3.841829] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    3.849307] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    3.908174] usb 3-4.1: New USB device found, idVendor=413c, idProduct=8157
[    3.908179] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.917433] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input6
[    3.917582] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
[    3.947922] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.985178] usb 3-4.2: new full speed USB device number 4 using ohci_hcd
[    4.085175] usb 3-4.2: New USB device found, idVendor=413c, idProduct=8158
[    4.085180] usb 3-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.096479] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input7
[    4.096801] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
[    6.975354] udevd[5340]: starting version 171
[    7.619245] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[    7.619248] ite_cir: Using model: ITE8708 CIR transceiver
[    7.619266] ite_cir: TX-capable: 1
[    7.619267] ite_cir: Sample period (ns): 8680
[    7.619269] ite_cir: TX carrier frequency (Hz): 38000
[    7.619270] ite_cir: TX duty cycle (%): 33
[    7.619272] ite_cir: RX low carrier frequency (Hz): 0
[    7.619274] ite_cir: RX high carrier frequency (Hz): 0
[    7.659172] usb 3-4.3: new full speed USB device number 5 using ohci_hcd
[    7.749584] lib80211: common routines for IEEE802.11 drivers
[    7.749587] lib80211_crypt: registered algorithm 'NULL'
[    7.766173] usb 3-4.3: New USB device found, idVendor=413c, idProduct=8156
[    7.766178] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.766181] usb 3-4.3: Product: Dell Wireless 370 Bluetooth Mini-card
[    7.766184] usb 3-4.3: Manufacturer: Dell Computer Corp
[    7.879490] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    7.879669] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19
[    7.879674] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 19 (level, low) -> IRQ 19
[    7.879679] forcedeth 0000:00:0a.0: setting latency timer to 64
[    7.903850] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[    7.903861] r592 0000:01:07.2: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[    7.903964] r592: driver successfully loaded
[    7.959028] Registered IR keymap rc-rc6-mce
[    7.959119] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input8
[    7.959182] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[    7.959206] ite_cir: driver has been successfully loaded
[    7.981131] IR NEC protocol handler initialized
[    8.008272] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[    8.008278] firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[    8.038720] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    8.059084] firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[    8.080473] input: Dell WMI hotkeys as /devices/virtual/input/input10
[    8.081012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.157404] IR RC5(x) protocol handler initialized
[    8.182451] sdhci: Secure Digital Host Controller Interface driver
[    8.182454] sdhci: Copyright(c) Pierre Ossman
[    8.400367] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f4:ab:89
[    8.400371] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[    8.400429] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[    8.400446] i2c i2c-1: nForce2 SMBus adapter at 0x2000
[    8.400532] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.407697] sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
[    8.407714] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[    8.407754] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.407765] mmc0: no vmmc regulator found
[    8.407789] Registered led device: mmc0::
[    8.407819] mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
[    8.409137] udevd[5350]: renamed network interface eth0 to eth1
[    8.433287] IR RC6 protocol handler initialized
[    8.449443] Linux media interface: v0.10
[    8.451252] IR JVC protocol handler initialized
[    8.561318] firewire_core: created device fw0: GUID 484fc00016b19e21, S400
[    8.601067] r852 0000:01:07.3: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[    8.601131] r852: driver loaded successfully
[    8.624303] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[    8.624307] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[    8.624440] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[    8.624451] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[    8.624453] hda_intel: Disabling MSI
[    8.625253] HDA Intel 0000:00:08.0: setting latency timer to 64
[    8.632967] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[    8.633109] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input11
[    8.633159] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    8.633178] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
[    8.633244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/LNXVIDEO:01/input/input12
[    8.633268] ACPI: Video Device [Z01I] (multi-head: yes  rom: yes  post: no)
[    8.661306] Bluetooth: Core ver 2.16
[    8.661329] NET: Registered protocol family 31
[    8.661331] Bluetooth: HCI device and connection manager initialized
[    8.661333] Bluetooth: HCI socket layer initialized
[    8.661335] Bluetooth: L2CAP socket layer initialized
[    8.662124] Bluetooth: SCO socket layer initialized
[    8.675969] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    8.676322] usbcore: registered new interface driver btusb
[    8.685986] IR Sony protocol handler initialized
[    8.693482] Linux video capture interface: v2.00
[    8.933957] Error: Driver 'pcspkr' is already registered, aborting...
[    9.083315] lirc_dev: IR Remote Control driver registered, major 242
[    9.084440] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[    9.084442] IR LIRC bridge handler initialized
[    9.094847] uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0)
[    9.096134] input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input13
[    9.096187] usbcore: registered new interface driver uvcvideo
[    9.096188] USB Video Class driver (v1.1.0)
[    9.718741] wl: module license 'MIXED/Proprietary' taints kernel.
[    9.718745] Disabling lock debugging due to kernel taint
[    9.725167] wl 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
[    9.725176] wl 0000:06:00.0: setting latency timer to 64
[    9.984197] lib80211_crypt: registered algorithm 'TKIP'
[   10.013465] eth0: Broadcom BCM432b 802.11 Hybrid Wireless Controller 5.100.82.38
[   11.644020] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
[   12.646036] hda-intel: Codec #1 probe error; disabling it...
[   13.010113] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input14
[   13.126116] input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input15
[   13.126206] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
[   13.126256] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   13.126735] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
[   13.126740] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
[   13.126780] nvidia 0000:02:00.0: enabling device (0004 -> 0007)
[   13.126792] nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
[   13.126804] nvidia 0000:02:00.0: setting latency timer to 64
[   13.126813] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[   13.127092] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
[   13.127096] nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
[   13.127103] nvidia 0000:03:00.0: setting latency timer to 64
[   13.127106] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   13.127345] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  285.05.09  Fri Sep 23 17:31:57 PDT 2011
[   16.004351] EXT4-fs (sda1): re-mounted. Opts: (null)
[   17.236090] Bluetooth: RFCOMM TTY layer initialized
[   17.236094] Bluetooth: RFCOMM socket layer initialized
[   17.236095] Bluetooth: RFCOMM ver 1.11
[   17.392760] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.392762] Bluetooth: BNEP filters: protocol multicast
[   18.571994] fbcondecor: console 1 using theme 'sabayon'
[   18.612267] fbcondecor: switched decor state to 'on' on console 1
[   18.655426] fbcondecor: console 2 using theme 'sabayon'
[   18.695727] fbcondecor: switched decor state to 'on' on console 2
[   18.738808] fbcondecor: console 3 using theme 'sabayon'
[   18.779502] fbcondecor: switched decor state to 'on' on console 3
[   18.821879] fbcondecor: console 4 using theme 'sabayon'
[   18.862484] fbcondecor: switched decor state to 'on' on console 4
[   18.906036] fbcondecor: console 5 using theme 'sabayon'
[   18.946452] fbcondecor: switched decor state to 'on' on console 5
[   18.989618] fbcondecor: console 6 using theme 'sabayon'
[   19.030066] fbcondecor: switched decor state to 'on' on console 6
[   19.073352] fbcondecor: console 7 using theme 'sabayon'
[   19.113711] fbcondecor: switched decor state to 'on' on console 7
[   19.157426] fbcondecor: console 8 using theme 'sabayon'
[   19.198089] fbcondecor: switched decor state to 'on' on console 8
[   19.241403] fbcondecor: console 9 using theme 'sabayon'
[   19.281753] fbcondecor: switched decor state to 'on' on console 9
[   19.325036] fbcondecor: console 10 using theme 'sabayon'
[   19.365485] fbcondecor: switched decor state to 'on' on console 10
[   19.409129] fbcondecor: console 11 using theme 'sabayon'
[   19.449815] fbcondecor: switched decor state to 'on' on console 11
[   19.890124] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.906485] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   20.040328] NET: Registered protocol family 10
[   20.043926] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.149192] fbcondecor: switched decor state to 'off' on console 6
[   24.409051] fbcondecor: console 6 using theme 'sabayon'
[   24.413561] fbcondecor: switched decor state to 'on' on console 6
[   26.138161] Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 across:2097148k
[   34.938024] eth1: no IPv6 routers present
[   35.250054] eth0: no IPv6 routers present


[cchalc]

..And here is the cat /var/log/Xorg.0.log

Code: Select all

[    21.363]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    21.363] X Protocol Version 11, Revision 0
[    21.363] Build Operating System: Linux 2.6.38-sabayon x86_64 Gentoo
[    21.363] Current Operating System: Linux sabayon 3.0.0-sabayon #1 SMP Wed Aug 31 05:36:15 UTC 2011 x86_64
[    21.363] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-3.0.0-sabayon ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet dokeymap keymap=us domdadm resume=swap:UUID=23ae57c8-b330-48c1-913f-e495e6fc01e8 real_resume=UUID=23ae57c8-b330-48c1-913f-e495e6fc01e8 root=UUID=65bc510c-3a89-4bb6-836b-4ed7cfcfeaa2 docrypt
[    21.363] Build Date: 30 September 2011  08:26:36PM
[    21.363] 
[    21.363] Current version of pixman: 0.22.0
[    21.364]         Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    21.364] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.364] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 23 13:34:08 2011
[    21.513] (==) Using config file: "/etc/X11/xorg.conf"
[    21.514] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    21.514] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.732] (==) ServerLayout "Main Layout"
[    21.732] (**) |-->Screen "Screen 0" (0)
[    21.732] (**) |   |-->Monitor "Generic Monitor"
[    21.749] (**) |   |-->Device "SabayonVga0"
[    21.749] (**) |-->Screen "Screen 1" (1)
[    21.749] (**) |   |-->Monitor "Generic Monitor"
[    21.749] (**) |   |-->Device "SabayonVga1"
[    21.749] (**) Option "AllowMouseOpenFail" "true"
[    21.749] (==) Automatically adding devices
[    21.749] (==) Automatically enabling devices
[    21.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    21.966]         Entry deleted from font path.
[    21.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    21.966]         Entry deleted from font path.
[    21.971] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    21.971]         Entry deleted from font path.
[    21.971]         (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    21.991] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    21.991]         Entry deleted from font path.
[    21.991]         (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    21.991] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/
[    21.991] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    21.991] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.991] (II) Loader magic: 0x7d7080
[    21.991] (II) Module ABI versions:
[    21.991]         X.Org ANSI C Emulation: 0.4
[    21.991]         X.Org Video Driver: 10.0
[    21.991]         X.Org XInput driver : 12.2
[    21.991]         X.Org Server Extension : 5.0
[    21.992] (--) PCI: (0:2:0:0) 10de:06e8:1028:0271 rev 161, Mem @ 0xae000000/16777216, 0xd0000000/268435456, 0xac000000/33554432, I/O @ 0x00004000/128
[    21.992] (--) PCI:*(0:3:0:0) 10de:0866:1028:0271 rev 177, Mem @ 0xaa000000/16777216, 0xb0000000/268435456, 0xcc000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
[    21.992] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    21.992] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    21.992] (II) "dbe" will be loaded by default.
[    21.992] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    21.992] (II) "record" will be loaded by default.
[    21.992] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    21.992] (II) "dri2" will be loaded by default.
[    21.992] (II) LoadModule: "extmod"
[    22.088] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    22.142] (II) Module extmod: vendor="X.Org Foundation"
[    22.142]         compiled for 1.10.4, module version = 1.0.0
[    22.142]         Module class: X.Org Server Extension
[    22.142]         ABI class: X.Org Server Extension, version 5.0
[    22.142] (II) Loading extension MIT-SCREEN-SAVER
[    22.142] (II) Loading extension XFree86-VidModeExtension
[    22.142] (II) Loading extension DPMS
[    22.142] (II) Loading extension XVideo
[    22.142] (II) Loading extension XVideo-MotionCompensation
[    22.142] (II) Loading extension X-Resource
[    22.142] (II) LoadModule: "i2c"
[    22.142] (II) Module "i2c" already built-in
[    22.142] (II) LoadModule: "ddc"
[    22.142] (II) Module "ddc" already built-in
[    22.142] (II) LoadModule: "vbe"
[    22.142] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    22.164] (II) Module vbe: vendor="X.Org Foundation"
[    22.164]         compiled for 1.10.4, module version = 1.1.0
[    22.164]         ABI class: X.Org Video Driver, version 10.0
[    22.164] (II) LoadModule: "dri"
[    22.181] (WW) Warning, couldn't open module dri
[    22.181] (II) UnloadModule: "dri"
[    22.181] (II) Unloading dri
[    22.181] (EE) Failed to load module "dri" (module does not exist, 0)
[    22.181] (II) LoadModule: "glx"
[    22.182] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    23.896] (II) Module glx: vendor="NVIDIA Corporation"
[    23.912]         compiled for 4.0.2, module version = 1.0.0
[    23.912]         Module class: X.Org Server Extension
[    23.912] (II) NVIDIA GLX Module  285.05.09  Fri Sep 23 17:51:24 PDT 2011
[    23.912] (II) Loading extension GLX
[    23.912] (II) LoadModule: "synaptics"
[    23.912] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    23.937] (II) Module synaptics: vendor="X.Org Foundation"
[    23.937]         compiled for 1.10.2, module version = 1.4.0
[    23.937]         Module class: X.Org XInput Driver
[    23.937]         ABI class: X.Org XInput driver, version 12.2
[    23.937] (II) LoadModule: "dbe"
[    23.937] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    23.942] (II) Module dbe: vendor="X.Org Foundation"
[    23.942]         compiled for 1.10.4, module version = 1.0.0
[    23.942]         Module class: X.Org Server Extension
[    23.942]         ABI class: X.Org Server Extension, version 5.0
[    23.942] (II) Loading extension DOUBLE-BUFFER
[    23.942] (II) LoadModule: "record"
[    23.942] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    23.943] (II) Module record: vendor="X.Org Foundation"
[    23.943]         compiled for 1.10.4, module version = 1.13.0
[    23.943]         Module class: X.Org Server Extension
[    23.943]         ABI class: X.Org Server Extension, version 5.0
[    23.943] (II) Loading extension RECORD
[    23.943] (II) LoadModule: "dri2"
[    23.943] (WW) Warning, couldn't open module dri2
[    23.943] (II) UnloadModule: "dri2"
[    23.943] (II) Unloading dri2
[    23.943] (EE) Failed to load module "dri2" (module does not exist, 0)
[    23.943] (II) LoadModule: "nvidia"
[    23.943] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    24.077] (II) Module nvidia: vendor="NVIDIA Corporation"
[    24.079]         compiled for 4.0.2, module version = 1.0.0
[    24.079]         Module class: X.Org Video Driver
[    24.138] (II) NVIDIA dlloader X Driver  285.05.09  Fri Sep 23 17:33:35 PDT 2011
[    24.138] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    24.138] (++) using VT number 7
[    24.413] (II) Loading sub module "fb"
[    24.413] (II) LoadModule: "fb"
[    24.414] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    24.551] (II) Module fb: vendor="X.Org Foundation"
[    24.551]         compiled for 1.10.4, module version = 1.0.0
[    24.551]         ABI class: X.Org ANSI C Emulation, version 0.4
[    24.551] (II) Loading sub module "wfb"
[    24.551] (II) LoadModule: "wfb"
[    24.551] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    24.556] (II) Module wfb: vendor="X.Org Foundation"
[    24.556]         compiled for 1.10.4, module version = 1.0.0
[    24.556]         ABI class: X.Org ANSI C Emulation, version 0.4
[    24.556] (II) Loading sub module "ramdac"
[    24.556] (II) LoadModule: "ramdac"
[    24.556] (II) Module "ramdac" already built-in
[    24.576] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    24.576] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    24.576] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    24.587] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    24.587] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    24.587] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    24.587] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    24.587] (==) NVIDIA(0): RGB weight 888
[    24.587] (==) NVIDIA(0): Default visual is TrueColor
[    24.587] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.587] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
[    24.587] (**) NVIDIA(0): Option "LogoPath" "/usr/share/backgrounds/sabayonlinux-nvidia.png"
[    29.653] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[    29.660] (II) NVIDIA(0): NVIDIA GPU GeForce 9200M GS (G98) at PCI:2:0:0 (GPU-0)
[    29.660] (--) NVIDIA(0): Memory: 524288 kBytes
[    29.660] (--) NVIDIA(0): VideoBIOS: 62.98.4d.00.06
[    29.660] (II) NVIDIA(0): Detected PCI Express Link width: 1X
[    29.660] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    29.660] (--) NVIDIA(0): Connected display device(s) on GeForce 9200M GS at PCI:2:0:0
[    29.660] (--) NVIDIA(0):     CRT-0
[    29.660] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    29.665] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[    29.665] (**) NVIDIA(0):     enabled on all display devices.
[    29.673] (II) NVIDIA(0): Assigned Display Device: CRT-0
[    29.673] (==) NVIDIA(0):
[    29.673] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    29.673] (==) NVIDIA(0):     will be used as the requested mode.
[    29.673] (==) NVIDIA(0):
[    29.673] (II) NVIDIA(0): Validated modes:
[    29.673] (II) NVIDIA(0):     "nvidia-auto-select"
[    29.673] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    29.675] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    29.675] (WW) NVIDIA(0):     from CRT-0's EDID.
[    29.675] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    29.675] (**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    29.675] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[    29.675] (==) NVIDIA(1): RGB weight 888
[    29.675] (==) NVIDIA(1): Default visual is TrueColor
[    29.675] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[    29.675] (**) NVIDIA(1): Option "AddARGBGLXVisuals" "true"
[    29.675] (**) NVIDIA(1): Option "LogoPath" "/usr/share/backgrounds/sabayonlinux-nvidia.png"
[    30.216] (II) NVIDIA(GPU-1): Display (LPL (DFP-0)) does not support NVIDIA 3D Vision
[    30.216] (II) NVIDIA(GPU-1):     stereo.
[    30.219] (II) NVIDIA(1): NVIDIA GPU GeForce 9400M G (C79) at PCI:3:0:0 (GPU-1)
[    30.219] (--) NVIDIA(1): Memory: 524288 kBytes
[    30.219] (--) NVIDIA(1): VideoBIOS: 62.79.3f.00.01
[    30.219] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[    30.219] (--) NVIDIA(1): Connected display device(s) on GeForce 9400M G at PCI:3:0:0
[    30.219] (--) NVIDIA(1):     LPL (DFP-0)
[    30.219] (--) NVIDIA(1): LPL (DFP-0): 330.0 MHz maximum pixel clock
[    30.219] (--) NVIDIA(1): LPL (DFP-0): Internal Dual Link LVDS
[    30.221] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID has been
[    30.221] (**) NVIDIA(1):     enabled on all display devices.
[    30.242] (II) NVIDIA(1): Assigned Display Device: DFP-0
[    30.242] (==) NVIDIA(1):
[    30.242] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[    30.242] (==) NVIDIA(1):     will be used as the requested mode.
[    30.242] (==) NVIDIA(1):
[    30.242] (II) NVIDIA(1): Validated modes:
[    30.242] (II) NVIDIA(1):     "nvidia-auto-select"
[    30.242] (II) NVIDIA(1): Virtual screen size determined to be 1280 x 800
[    31.299] (--) NVIDIA(1): DPI set to (112, 112); computed from "UseEdidDpi" X config
[    31.300] (--) NVIDIA(1):     option
[    31.300] (**) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
[    31.300] (--) Depth 24 pixmap format is 32 bpp
[    31.300] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    31.312] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    31.312] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    31.312] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    31.312] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    31.312] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    31.312] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    31.312] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    31.312] (II) NVIDIA(0):     Config Options in the README.
[    31.314] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    31.422] (II) NVIDIA(0): Logo "/usr/share/backgrounds/sabayonlinux-nvidia.png" is
[    31.422] (II) NVIDIA(0):     bigger than the screen.
[    31.424] (II) Loading extension NV-GLX
[    31.515] (==) NVIDIA(0): Disabling shared memory pixmaps
[    31.515] (==) NVIDIA(0): Backing store disabled
[    31.515] (==) NVIDIA(0): Silken mouse enabled
[    31.516] (==) NVIDIA(0): DPMS enabled
[    31.516] (II) Loading extension NV-CONTROL
[    31.517] (II) Loading extension XINERAMA
[    31.517] (II) Loading sub module "dri2"
[    31.517] (II) LoadModule: "dri2"
[    31.517] (WW) Warning, couldn't open module dri2
[    31.517] (II) UnloadModule: "dri2"
[    31.517] (II) Unloading dri2
[    31.517] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[    31.517] (II) NVIDIA(0): The X server will not be able to send the VDPAU driver name to
[    31.517] (II) NVIDIA(0):     libvdpau.
[    31.517] (==) RandR enabled
[    31.527] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[    31.527] (II) NVIDIA(1):     may not be running or the "AcpidSocketPath" X
[    31.527] (II) NVIDIA(1):     configuration option may not be set correctly.  When the
[    31.527] (II) NVIDIA(1):     ACPI event daemon is available, the NVIDIA X driver will
[    31.527] (II) NVIDIA(1):     try to use it to receive ACPI event notifications.  For
[    31.527] (II) NVIDIA(1):     details, please see the "ConnectToAcpid" and
[    31.527] (II) NVIDIA(1):     "AcpidSocketPath" X configuration options in Appendix B: X
[    31.527] (II) NVIDIA(1):     Config Options in the README.
[    31.527] (WW) NVIDIA(1): Failed to register for display change hotkey events: Unable to
[    31.527] (WW) NVIDIA(1):     enable event notification in the NVIDIA kernel module.
[    31.530] (II) NVIDIA(1): Setting mode "nvidia-auto-select"
[    31.804] (II) NVIDIA(1): Logo "/usr/share/backgrounds/sabayonlinux-nvidia.png" is
[    31.804] (II) NVIDIA(1):     bigger than the screen.
[    31.833] (==) NVIDIA(1): Disabling shared memory pixmaps
[    31.833] (==) NVIDIA(1): Backing store disabled
[    31.833] (==) NVIDIA(1): Silken mouse enabled
[    31.833] (==) NVIDIA(1): DPMS enabled
[    31.833] (II) Loading sub module "dri2"
[    31.833] (II) LoadModule: "dri2"
[    31.834] (WW) Warning, couldn't open module dri2
[    31.834] (II) UnloadModule: "dri2"
[    31.834] (II) Unloading dri2
[    31.834] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[    31.834] (II) NVIDIA(1): The X server will not be able to send the VDPAU driver name to
[    31.834] (II) NVIDIA(1):     libvdpau.
[    31.834] (==) RandR enabled
[    31.834] (II) Initializing built-in extension Generic Event Extension
[    31.834] (II) Initializing built-in extension SHAPE
[    31.834] (II) Initializing built-in extension MIT-SHM
[    31.834] (II) Initializing built-in extension XInputExtension
[    31.834] (II) Initializing built-in extension XTEST
[    31.834] (II) Initializing built-in extension BIG-REQUESTS
[    31.834] (II) Initializing built-in extension SYNC
[    31.834] (II) Initializing built-in extension XKEYBOARD
[    31.834] (II) Initializing built-in extension XC-MISC
[    31.834] (II) Initializing built-in extension XINERAMA
[    31.834] (II) Initializing built-in extension XFIXES
[    31.834] (II) Initializing built-in extension RENDER
[    31.834] (II) Initializing built-in extension RANDR
[    31.834] (II) Initializing built-in extension COMPOSITE
[    31.834] (II) Initializing built-in extension DAMAGE
[    31.835] (II) Initializing extension GLX
[    32.281] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.281] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.281] (**) Power Button: Applying InputClass "keyboard"
[    32.281] (II) LoadModule: "evdev"
[    32.281] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.300] (II) Module evdev: vendor="X.Org Foundation"
[    32.300]         compiled for 1.10.2, module version = 2.6.0
[    32.300]         Module class: X.Org XInput Driver
[    32.300]         ABI class: X.Org XInput driver, version 12.2
[    32.300] (II) Using input driver 'evdev' for 'Power Button'
[    32.300] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.300] (**) Power Button: always reports core events
[    32.300] (**) Power Button: Device: "/dev/input/event3"
[    32.300] (--) Power Button: Found keys
[    32.300] (II) Power Button: Configuring as keyboard
[    32.300] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    32.300] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    32.300] (**) Option "xkb_rules" "evdev"
[    32.300] (**) Option "xkb_model" "evdev"
[    32.300] (**) Option "xkb_layout" "us"
[    32.300] (WW) Option "xkb_variant" requires an string value
[    32.300] (WW) Option "XkbVariant" requires an string value
[    32.300] (WW) Option "xkb_options" requires an string value
[    32.300] (WW) Option "XkbOptions" requires an string value
[    32.323] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    32.323] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.323] (**) Video Bus: Applying InputClass "keyboard"
[    32.323] (II) Using input driver 'evdev' for 'Video Bus'
[    32.323] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.323] (**) Video Bus: always reports core events
[    32.323] (**) Video Bus: Device: "/dev/input/event10"
[    32.323] (--) Video Bus: Found keys
[    32.323] (II) Video Bus: Configuring as keyboard
[    32.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input11/event10"
[    32.323] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    32.323] (**) Option "xkb_rules" "evdev"
[    32.323] (**) Option "xkb_model" "evdev"
[    32.323] (**) Option "xkb_layout" "us"
[    32.323] (WW) Option "xkb_variant" requires an string value
[    32.323] (WW) Option "XkbVariant" requires an string value
[    32.323] (WW) Option "xkb_options" requires an string value
[    32.323] (WW) Option "XkbOptions" requires an string value
[    32.324] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    32.324] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.324] (**) Video Bus: Applying InputClass "keyboard"
[    32.324] (II) Using input driver 'evdev' for 'Video Bus'
[    32.324] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.324] (**) Video Bus: always reports core events
[    32.324] (**) Video Bus: Device: "/dev/input/event11"
[    32.324] (--) Video Bus: Found keys
[    32.324] (II) Video Bus: Configuring as keyboard
[    32.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/LNXVIDEO:01/input/input12/event11"
[    32.324] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    32.324] (**) Option "xkb_rules" "evdev"
[    32.324] (**) Option "xkb_model" "evdev"
[    32.324] (**) Option "xkb_layout" "us"
[    32.324] (WW) Option "xkb_variant" requires an string value
[    32.324] (WW) Option "XkbVariant" requires an string value
[    32.324] (WW) Option "xkb_options" requires an string value
[    32.324] (WW) Option "XkbOptions" requires an string value
[    32.383] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    32.383] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.383] (**) Sleep Button: Applying InputClass "keyboard"
[    32.383] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.383] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.383] (**) Sleep Button: always reports core events
[    32.383] (**) Sleep Button: Device: "/dev/input/event1"
[    32.383] (--) Sleep Button: Found keys
[    32.383] (II) Sleep Button: Configuring as keyboard
[    32.383] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/PNP0C0E:00/input/input1/event1"
[    32.383] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    32.383] (**) Option "xkb_rules" "evdev"
[    32.383] (**) Option "xkb_model" "evdev"
[    32.383] (**) Option "xkb_layout" "us"
[    32.383] (WW) Option "xkb_variant" requires an string value
[    32.383] (WW) Option "XkbVariant" requires an string value
[    32.383] (WW) Option "xkb_options" requires an string value
[    32.383] (WW) Option "XkbOptions" requires an string value
[    32.383] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    32.383] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.384] (**) Power Button: Applying InputClass "keyboard"
[    32.384] (II) Using input driver 'evdev' for 'Power Button'
[    32.384] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.384] (**) Power Button: always reports core events
[    32.384] (**) Power Button: Device: "/dev/input/event0"
[    32.384] (--) Power Button: Found keys
[    32.384] (II) Power Button: Configuring as keyboard
[    32.384] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    32.384] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    32.384] (**) Option "xkb_rules" "evdev"
[    32.384] (**) Option "xkb_model" "evdev"
[    32.384] (**) Option "xkb_layout" "us"
[    32.384] (WW) Option "xkb_variant" requires an string value
[    32.384] (WW) Option "XkbVariant" requires an string value
[    32.384] (WW) Option "xkb_options" requires an string value
[    32.384] (WW) Option "XkbOptions" requires an string value
[    32.384] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    32.384] (II) No input driver/identifier specified (ignoring)
[    32.385] (II) config/udev: Adding input device HID 413c:8157 (/dev/input/event6)
[    32.385] (**) HID 413c:8157: Applying InputClass "evdev keyboard catchall"
[    32.385] (**) HID 413c:8157: Applying InputClass "keyboard"
[    32.385] (II) Using input driver 'evdev' for 'HID 413c:8157'
[    32.385] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.385] (**) HID 413c:8157: always reports core events
[    32.385] (**) HID 413c:8157: Device: "/dev/input/event6"
[    32.385] (--) HID 413c:8157: Found keys
[    32.385] (II) HID 413c:8157: Configuring as keyboard
[    32.385] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input6/event6"
[    32.385] (II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD)
[    32.385] (**) Option "xkb_rules" "evdev"
[    32.385] (**) Option "xkb_model" "evdev"
[    32.385] (**) Option "xkb_layout" "us"
[    32.385] (WW) Option "xkb_variant" requires an string value
[    32.385] (WW) Option "XkbVariant" requires an string value
[    32.385] (WW) Option "xkb_options" requires an string value
[    32.385] (WW) Option "XkbOptions" requires an string value
[    32.387] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event12)
[    32.387] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[    32.387] (**) Integrated Webcam: Applying InputClass "keyboard"
[    32.387] (II) Using input driver 'evdev' for 'Integrated Webcam'
[    32.387] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.387] (**) Integrated Webcam: always reports core events
[    32.387] (**) Integrated Webcam: Device: "/dev/input/event12"
[    32.387] (--) Integrated Webcam: Found keys
[    32.387] (II) Integrated Webcam: Configuring as keyboard
[    32.387] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input13/event12"
[    32.387] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD)
[    32.387] (**) Option "xkb_rules" "evdev"
[    32.387] (**) Option "xkb_model" "evdev"
[    32.387] (**) Option "xkb_layout" "us"
[    32.387] (WW) Option "xkb_variant" requires an string value
[    32.387] (WW) Option "XkbVariant" requires an string value
[    32.387] (WW) Option "xkb_options" requires an string value
[    32.387] (WW) Option "XkbOptions" requires an string value
[    32.388] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[    32.388] (II) No input driver/identifier specified (ignoring)
[    32.388] (II) config/udev: Adding input device HDA NVidia Mic at Ext Left Jack (/dev/input/event14)
[    32.388] (II) No input driver/identifier specified (ignoring)
[    32.389] (II) config/udev: Adding input device HDA NVidia HP Out at Ext Left Jack (/dev/input/event15)
[    32.389] (II) No input driver/identifier specified (ignoring)
[    32.389] (II) config/udev: Adding input device HDA NVidia HP Out at Ext Left Jack (/dev/input/event16)
[    32.389] (II) No input driver/identifier specified (ignoring)
[    32.393] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    32.393] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    32.393] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[    32.393] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    32.393] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.393] (**) AT Translated Set 2 keyboard: always reports core events
[    32.393] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    32.393] (--) AT Translated Set 2 keyboard: Found keys
[    32.393] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    32.393] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    32.393] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    32.393] (**) Option "xkb_rules" "evdev"
[    32.393] (**) Option "xkb_model" "evdev"
[    32.393] (**) Option "xkb_layout" "us"
[    32.393] (WW) Option "xkb_variant" requires an string value
[    32.393] (WW) Option "XkbVariant" requires an string value
[    32.393] (WW) Option "xkb_options" requires an string value
[    32.393] (WW) Option "XkbOptions" requires an string value
[    32.394] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    32.394] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    32.394] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    32.394] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    32.394] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    32.394] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    32.394] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.394] (**) Option "Device" "/dev/input/event5"
[    32.418] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    32.418] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5260
[    32.418] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    32.418] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    32.418] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    32.418] (**) Option "VertEdgeScroll" "1"
[    32.418] (**) Option "VertTwoFingerScroll" "1"
[    32.418] (**) Option "HorizTwoFingerScroll" "1"
[    32.418] (**) Option "TapButton1" "1"
[    32.418] (**) Option "TapButton2" "2"
[    32.418] (**) Option "TapButton3" "3"
[    32.418] (**) Option "CircularScrolling" "0"
[    32.450] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    32.450] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.482] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[    32.482] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    32.482] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    32.482] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    32.482] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.034
[    32.482] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    32.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    32.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    32.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    32.482] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    32.482] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    32.482] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    32.482] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    32.482] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    32.482] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.482] (**) Option "Device" "/dev/input/mouse0"
[    32.482] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range.  defaulting to 1615 - 5685
[    32.482] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range.  defaulting to 1729 - 4171
[    32.482] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.  defaulting to 0 - 256
[    32.482] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 16
[    32.503] (EE) Query no Synaptics: 6003C8
[    32.503] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[    32.503] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[    32.530] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[    32.530] (II) UnloadModule: "synaptics"
[    32.530] (II) Unloading synaptics
[    32.530] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    32.530] (II) No input driver/identifier specified (ignoring)
[    32.535] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[    32.535] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    32.535] (**) Dell WMI hotkeys: Applying InputClass "keyboard"
[    32.535] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    32.535] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.535] (**) Dell WMI hotkeys: always reports core events
[    32.535] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
[    32.535] (--) Dell WMI hotkeys: Found keys
[    32.535] (II) Dell WMI hotkeys: Configuring as keyboard
[    32.535] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[    32.535] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[    32.535] (**) Option "xkb_rules" "evdev"
[    32.535] (**) Option "xkb_model" "evdev"
[    32.535] (**) Option "xkb_layout" "us"
[    32.535] (WW) Option "xkb_variant" requires an string value
[    32.535] (WW) Option "XkbVariant" requires an string value
[    32.535] (WW) Option "xkb_options" requires an string value
[    32.535] (WW) Option "XkbOptions" requires an string value
[    32.538] (II) config/udev: Adding input device ITE8708 CIR transceiver (/dev/input/event7)
[    32.538] (**) ITE8708 CIR transceiver: Applying InputClass "evdev keyboard catchall"
[    32.538] (**) ITE8708 CIR transceiver: Applying InputClass "keyboard"
[    32.538] (II) Using input driver 'evdev' for 'ITE8708 CIR transceiver'
[    32.538] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    32.538] (**) ITE8708 CIR transceiver: always reports core events
[    32.538] (**) ITE8708 CIR transceiver: Device: "/dev/input/event7"
[    32.538] (--) ITE8708 CIR transceiver: Found keys
[    32.538] (II) ITE8708 CIR transceiver: Configuring as keyboard
[    32.538] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input8/event7"
[    32.538] (II) XINPUT: Adding extended input device "ITE8708 CIR transceiver" (type: KEYBOARD)
[    32.538] (**) Option "xkb_rules" "evdev"
[    32.538] (**) Option "xkb_model" "evdev"
[    32.538] (**) Option "xkb_layout" "us"
[    32.538] (WW) Option "xkb_variant" requires an string value
[    32.538] (WW) Option "XkbVariant" requires an string value
[    32.538] (WW) Option "xkb_options" requires an string value
[    32.538] (WW) Option "XkbOptions" requires an string value


Hope this helps.
@genfool, thanks for refreshing my memory. Everything was starting to blur together over those three days on IRC.

[lxnay]

Please also post the current /etc/X11/xorg.conf

[cchalc]

current xorg.conf

Code: Select all

    Section "Module"
        SubSection  "extmod"
           Option    "omit xfree86-dga"
        EndSubSection
        Load    "i2c"
        Load    "ddc"
        Load    "vbe"
        Load    "dri"
        Load    "glx"
        Load    "synaptics"
    EndSection
    Section "ServerFlags"
         Option    "AllowMouseOpenFail"    "true"
    EndSection
    Section "Monitor"
        Identifier    "Generic Monitor"
        VertRefresh    43 - 60
        HorizSync      28 - 80
    EndSection
    Section "Device"
        Identifier  "SabayonVga0"
        Driver      "nvidia"
        BusID    "PCI:02:00"
        #Option "RenderAccel" "on"
        #Option "XAANoOffscreenPixmaps"
        #Option "BusType" "PCI"
        #Option "ColorTiling" "on"
        #Option "EnablePageFlip" "on"
        # UseEvents is causing segmentation faults with
        # NVIDIA 6xxx, 7xxx and >=275.xx.xx drivers
        #Option "UseEvents" "True"
        Option "LogoPath" "/usr/share/backgrounds/sabayonlinux-nvidia.png"
    EndSection
           
    Section "Device"
        Identifier  "SabayonVga1"
        Driver      "nvidia"
        BusID    "PCI:03:00"
        #Option "RenderAccel" "on"
        #Option "XAANoOffscreenPixmaps"
        #Option "BusType" "PCI"
        #Option "ColorTiling" "on"
        #Option "EnablePageFlip" "on"
        # UseEvents is causing segmentation faults with
        # NVIDIA 6xxx, 7xxx and >=275.xx.xx drivers
        #Option "UseEvents" "True"
        Option "LogoPath" "/usr/share/backgrounds/sabayonlinux-nvidia.png"
    EndSection
           
    Section "Screen"
        Identifier    "Screen 0"
        Device        "SabayonVga0"
        Monitor       "Generic Monitor"
        Option       "AddARGBGLXVisuals" "true"
        DefaultDepth 24
        SubSection "Display"
            Depth                8
            ViewPort        0 0
            #Modes                "1024x768" "800x600" "640x480"
        EndSubsection
        SubSection "Display"
            Depth           16
            ViewPort        0 0
            #Modes                "1024x768" "800x600" "640x480"
        EndSubsection
        SubSection "Display"
            Depth           24
            ViewPort        0 0
            #Modes                "1024x768" "800x600" "640x480"
        EndSubsection
    EndSection
    Section "Screen"
        Identifier    "Screen 1"
        Device        "SabayonVga1"
        Monitor       "Generic Monitor"
        Option       "AddARGBGLXVisuals" "true"
        DefaultDepth 24
        SubSection "Display"
            Depth                8
            ViewPort        0 0
            #Modes                "1024x768" "800x600" "640x480"
        EndSubsection
        SubSection "Display"
            Depth           16
            ViewPort        0 0
            #Modes                "1024x768" "800x600" "640x480"
        EndSubsection
        SubSection "Display"
            Depth           24
            ViewPort        0 0
            #Modes                "1024x768" "800x600" "640x480"
        EndSubsection
    EndSection
    Section "DRI"
        Mode 0666
    EndSection
    Section "ServerLayout"
        Identifier   "Main Layout"
        Screen 0    "Screen 0"
        Screen 1    "Screen 1"
    EndSection
    Section "Extensions"
       #Option "Composite" "Enable"
    EndSection


[phinix]

any updates on these? i've an m1210, with go7400 i think and i get the same black screen on boot.
And whats even worse, i dont know how to config the wifi network with a root terminal...

[wolfden]

phinix - you should be using Sabayon 8 and starting a new topic instead of bumping an old one with that doesn't pertain to you.

You will need to check the logs for errors and info, nvidia should be working out of the box.