gdm won't start after update to gnome 3 [Solved]

[kxp]

Today I updated(gnome 3 instalation) my laptop sabayon (asus 1201-nl) and during the process sulfur crashed, and I was forced to kill X.After that i couldn´t start X, so I entered in console finished the instalation.

Code: Select all

equo upgrade

After that I still have problems and i couldn't pass by password step, so i look in foruns and I have tryed this sugestions and fail.
http://forum.sabayon.org/viewtopic.php?t=24865
Other sugestion that i have found in sabayon foruns couldn't help me, so what can I do?

[popsUlfr]

Did you get any error, warning messages when you tried to start your x server? Can you post your /var/log/Xorg.0.log if the next advices do not work? And what suggestions did you already try?

Generic troubleshooting follows:
Remove your xorg.conf

Code: Select all

rm /etc/X11/xorg.conf

Use the nvidia tool to generate a new xorg.conf

Code: Select all

nvidia-xconfig

Prevent the automatic x configuration service to overwrite your config each time your reboot.

Code: Select all

rc-update del x-setup boot

Look into

Code: Select all

/etc/conf.d/xdm

is DISPLAYMANAGER set to gdm?

You are sure you have the nvidia-driver for your kernel version installed?

Code: Select all

equo search linux-sabayon

Code: Select all

equo search nvidia-drivers

[kxp]

I really need to add limbo? thats the only step that i didnt follow.
Where i can find the logs after login?

[popsUlfr]

I really need to add limbo? thats the only step that i didnt follow.
Where i can find the logs after login?

You don't need to add limbo. So can you log into your kde session from gdm or not?
You'll need to take the log right after you encounter your issue because it gets overwritten each time.
On your console you may

Code: Select all

less /var/log/Xorg.0.log

to read through it and pick up any errors.
or just move it so you can read it next time you log into gnome

Code: Select all

mv /var/log/Xorg.0.log /var/log/Xorg.0.log.issue

[kxp]

I don't have KDE, only gnome.
I put login name and password(its very ugly and have big letters), and the display turns black and then goes back to login screen.

Ps: popsUlfr i din't saw your message and i will try to do that.

[kxp]

Before i try anything, and make things worst let me show the Xorg.0.log file.

Code: Select all

[    39.707]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[    39.707] X Protocol Version 11, Revision 0
[    39.707] Build Operating System: Linux 2.6.38-sabayon i686 Gentoo
[    39.707] Current Operating System: Linux kxp 2.6.37-sabayon #1 SMP Tue Mar 22 17:38:07 UTC 2011 i686
[    39.707] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86-2.6.37-sabayon ro init=/linuxrc splash=silent,theme:sabayon vga=791 console=tty1 quiet dokeymap keymap=pt resume=swap:UUID=64625a1e-2c31-4ca5-8711-cda117175978 real_resume=UUID=64625a1e-2c31-4ca5-8711-cda117175978 root=UUID=b0c9efed-a241-4458-a5a3-9429b49515ae docrypt
[    39.707] Build Date: 07 August 2011  01:24:57PM
[    39.707] 
[    39.707] Current version of pixman: 0.22.0
[    39.707]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    39.708] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    39.708] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug  9 17:35:52 2011
[    39.798] (==) Using config file: "/etc/X11/xorg.conf"
[    39.798] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    39.798] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    40.054] (==) ServerLayout "Main Layout"
[    40.054] (**) |-->Screen "Screen 0" (0)
[    40.054] (**) |   |-->Monitor "Generic Monitor"
[    40.054] (**) |   |-->Device "SabayonVga0"
[    40.054] (**) Option "AllowMouseOpenFail" "true"
[    40.054] (==) Automatically adding devices
[    40.054] (==) Automatically enabling devices
[    40.235] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    40.235]    Entry deleted from font path.
[    40.235] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    40.235]    Entry deleted from font path.
[    40.235] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[    40.235]    Entry deleted from font path.
[    40.235] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[    40.235]    Entry deleted from font path.
[    40.235] (==) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/TTF/
[    40.235] (==) ModulePath set to "/usr/lib/xorg/modules"
[    40.235] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    40.235] (II) Loader magic: 0x81f5d00
[    40.235] (II) Module ABI versions:
[    40.235]    X.Org ANSI C Emulation: 0.4
[    40.235]    X.Org Video Driver: 10.0
[    40.235]    X.Org XInput driver : 12.2
[    40.235]    X.Org Server Extension : 5.0
[    40.237] (--) PCI:*(0:2:0:0) 10de:0876:1043:8402 rev 177, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[    40.238] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    40.238] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    40.238] (II) "dbe" will be loaded by default.
[    40.238] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    40.238] (II) "record" will be loaded by default.
[    40.238] (II) "dri" will be loaded by default.
[    40.238] (II) "dri2" will be loaded by default.
[    40.238] (II) LoadModule: "extmod"
[    40.321] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    40.336] (II) Module extmod: vendor="X.Org Foundation"
[    40.336]    compiled for 1.10.3, module version = 1.0.0
[    40.337]    Module class: X.Org Server Extension
[    40.337]    ABI class: X.Org Server Extension, version 5.0
[    40.337] (II) Loading extension MIT-SCREEN-SAVER
[    40.337] (II) Loading extension XFree86-VidModeExtension
[    40.337] (II) Loading extension DPMS
[    40.337] (II) Loading extension XVideo
[    40.337] (II) Loading extension XVideo-MotionCompensation
[    40.337] (II) Loading extension X-Resource
[    40.337] (II) LoadModule: "i2c"
[    40.337] (II) Module "i2c" already built-in
[    40.337] (II) LoadModule: "ddc"
[    40.337] (II) Module "ddc" already built-in
[    40.337] (II) LoadModule: "vbe"
[    40.747] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    40.828] (II) Module vbe: vendor="X.Org Foundation"
[    40.828]    compiled for 1.10.3, module version = 1.1.0
[    40.828]    ABI class: X.Org Video Driver, version 10.0
[    40.828] (II) LoadModule: "glx"
[    40.829] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    44.030] (II) Module glx: vendor="NVIDIA Corporation"
[    44.030]    compiled for 4.0.2, module version = 1.0.0
[    44.030]    Module class: X.Org Server Extension
[    44.030] (II) NVIDIA GLX Module  275.09.07  Wed Jun  8 16:01:21 PDT 2011
[    44.030] (II) Loading extension GLX
[    44.030] (II) LoadModule: "synaptics"
[    44.032] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    44.038] (II) Module synaptics: vendor="X.Org Foundation"
[    44.038]    compiled for 1.10.2, module version = 1.4.0
[    44.038]    Module class: X.Org XInput Driver
[    44.038]    ABI class: X.Org XInput driver, version 12.2
[    44.038] (II) LoadModule: "dbe"
[    44.039] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    44.051] (II) Module dbe: vendor="X.Org Foundation"
[    44.051]    compiled for 1.10.3, module version = 1.0.0
[    44.051]    Module class: X.Org Server Extension
[    44.051]    ABI class: X.Org Server Extension, version 5.0
[    44.051] (II) Loading extension DOUBLE-BUFFER
[    44.051] (II) LoadModule: "record"
[    44.052] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    44.068] (II) Module record: vendor="X.Org Foundation"
[    44.068]    compiled for 1.10.3, module version = 1.13.0
[    44.068]    Module class: X.Org Server Extension
[    44.068]    ABI class: X.Org Server Extension, version 5.0
[    44.068] (II) Loading extension RECORD
[    44.068] (II) LoadModule: "dri"
[    44.071] (WW) Warning, couldn't open module dri
[    44.071] (II) UnloadModule: "dri"
[    44.071] (II) Unloading dri
[    44.071] (EE) Failed to load module "dri" (module does not exist, 0)
[    44.071] (II) LoadModule: "dri2"
[    44.073] (WW) Warning, couldn't open module dri2
[    44.073] (II) UnloadModule: "dri2"
[    44.073] (II) Unloading dri2
[    44.073] (EE) Failed to load module "dri2" (module does not exist, 0)
[    44.073] (II) LoadModule: "nvidia"
[    44.074] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    44.118] (II) Module nvidia: vendor="NVIDIA Corporation"
[    44.118]    compiled for 4.0.2, module version = 1.0.0
[    44.118]    Module class: X.Org Video Driver
[    44.143] (II) NVIDIA dlloader X Driver  275.09.07  Wed Jun  8 15:43:48 PDT 2011
[    44.151] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    44.151] (++) using VT number 7

[    44.151] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    44.151] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    44.183] (II) Loading sub module "fb"
[    44.183] (II) LoadModule: "fb"
[    44.184] (II) Loading /usr/lib/xorg/modules/libfb.so
[    44.199] (II) Module fb: vendor="X.Org Foundation"
[    44.199]    compiled for 1.10.3, module version = 1.0.0
[    44.199]    ABI class: X.Org ANSI C Emulation, version 0.4
[    44.199] (II) Loading sub module "wfb"
[    44.199] (II) LoadModule: "wfb"
[    44.200] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    44.212] (II) Module wfb: vendor="X.Org Foundation"
[    44.212]    compiled for 1.10.3, module version = 1.0.0
[    44.212]    ABI class: X.Org ANSI C Emulation, version 0.4
[    44.212] (II) Loading sub module "ramdac"
[    44.212] (II) LoadModule: "ramdac"
[    44.212] (II) Module "ramdac" already built-in
[    44.245] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    44.245] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    44.245] (II) Loading /usr/lib/xorg/modules/libfb.so
[    44.273] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    44.273] (==) NVIDIA(0): RGB weight 888
[    44.273] (==) NVIDIA(0): Default visual is TrueColor
[    44.273] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    44.274] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
[    44.274] (**) NVIDIA(0): Option "LogoPath" "/usr/share/backgrounds/sabayonlinux-nvidia.png"
[    45.135] (II) NVIDIA(GPU-0): Display (HannStar Display Corp HSD121PHW1 (DFP-0)) does not
[    45.135] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[    45.139] (II) NVIDIA(0): NVIDIA GPU ION (C79) at PCI:2:0:0 (GPU-0)
[    45.139] (--) NVIDIA(0): Memory: 524288 kBytes
[    45.140] (--) NVIDIA(0): VideoBIOS: 62.79.67.00.00
[    45.140] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    45.140] (--) NVIDIA(0): Connected display device(s) on ION at PCI:2:0:0
[    45.140] (--) NVIDIA(0):     HannStar Display Corp HSD121PHW1 (DFP-0)
[    45.140] (--) NVIDIA(0): HannStar Display Corp HSD121PHW1 (DFP-0): 330.0 MHz maximum
[    45.140] (--) NVIDIA(0):     pixel clock
[    45.140] (--) NVIDIA(0): HannStar Display Corp HSD121PHW1 (DFP-0): Internal Dual Link
[    45.140] (--) NVIDIA(0):     LVDS
[    45.203] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    45.203] (==) NVIDIA(0):
[    45.203] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    45.203] (==) NVIDIA(0):     will be used as the requested mode.
[    45.203] (==) NVIDIA(0):
[    45.203] (II) NVIDIA(0): Validated modes:
[    45.203] (II) NVIDIA(0):     "nvidia-auto-select"
[    45.203] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[    46.274] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[    46.274] (--) NVIDIA(0):     option
[    46.274] (**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    46.274] (--) Depth 24 pixmap format is 32 bpp
[    46.275] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    46.285] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    46.285] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    46.285] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    46.285] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    46.285] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    46.285] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    46.285] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    46.286] (II) NVIDIA(0):     Config Options in the README.
[    46.288] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    46.653] (II) NVIDIA(0): Logo "/usr/share/backgrounds/sabayonlinux-nvidia.png" is
[    46.653] (II) NVIDIA(0):     bigger than the screen.
[    46.654] (II) Loading extension NV-GLX
[    46.760] (==) NVIDIA(0): Disabling shared memory pixmaps
[    46.760] (==) NVIDIA(0): Backing store disabled
[    46.760] (==) NVIDIA(0): Silken mouse enabled
[    46.768] (==) NVIDIA(0): DPMS enabled
[    46.769] (II) Loading extension NV-CONTROL
[    46.769] (II) Loading extension XINERAMA
[    46.770] (II) Loading sub module "dri2"
[    46.770] (II) LoadModule: "dri2"
[    46.772] (WW) Warning, couldn't open module dri2
[    46.772] (II) UnloadModule: "dri2"
[    46.772] (II) Unloading dri2
[    46.772] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[    46.772] (II) NVIDIA(0): The X server will not be able to send the VDPAU driver name to
[    46.772] (II) NVIDIA(0):     libvdpau.
[    46.772] (==) RandR enabled
[    46.772] (II) Initializing built-in extension Generic Event Extension
[    46.773] (II) Initializing built-in extension SHAPE
[    46.773] (II) Initializing built-in extension MIT-SHM
[    46.773] (II) Initializing built-in extension XInputExtension
[    46.773] (II) Initializing built-in extension XTEST
[    46.773] (II) Initializing built-in extension BIG-REQUESTS
[    46.773] (II) Initializing built-in extension SYNC
[    46.773] (II) Initializing built-in extension XKEYBOARD
[    46.773] (II) Initializing built-in extension XC-MISC
[    46.773] (II) Initializing built-in extension XINERAMA
[    46.773] (II) Initializing built-in extension XFIXES
[    46.773] (II) Initializing built-in extension RENDER
[    46.773] (II) Initializing built-in extension RANDR
[    46.773] (II) Initializing built-in extension COMPOSITE
[    46.773] (II) Initializing built-in extension DAMAGE
[    46.781] (II) Initializing extension GLX
[    47.591] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    47.592] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    47.592] (II) LoadModule: "evdev"
[    47.593] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.668] (II) Module evdev: vendor="X.Org Foundation"
[    47.668]    compiled for 1.10.2, module version = 2.6.0
[    47.668]    Module class: X.Org XInput Driver
[    47.668]    ABI class: X.Org XInput driver, version 12.2
[    47.668] (II) Using input driver 'evdev' for 'Power Button'
[    47.668] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.668] (**) Power Button: always reports core events
[    47.668] (**) Power Button: Device: "/dev/input/event3"
[    47.673] (--) Power Button: Found keys
[    47.673] (II) Power Button: Configuring as keyboard
[    47.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    47.673] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    47.673] (**) Option "xkb_rules" "evdev"
[    47.673] (**) Option "xkb_model" "evdev"
[    47.673] (**) Option "xkb_layout" "us"
[    47.824] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    47.824] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    47.824] (II) Using input driver 'evdev' for 'Video Bus'
[    47.824] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.824] (**) Video Bus: always reports core events
[    47.824] (**) Video Bus: Device: "/dev/input/event8"
[    47.831] (--) Video Bus: Found keys
[    47.831] (II) Video Bus: Configuring as keyboard
[    47.831] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input8/event8"
[    47.831] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    47.831] (**) Option "xkb_rules" "evdev"
[    47.831] (**) Option "xkb_model" "evdev"
[    47.831] (**) Option "xkb_layout" "us"
[    47.838] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    47.838] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    47.838] (II) Using input driver 'evdev' for 'Power Button'
[    47.838] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.838] (**) Power Button: always reports core events
[    47.838] (**) Power Button: Device: "/dev/input/event2"
[    47.843] (--) Power Button: Found keys
[    47.843] (II) Power Button: Configuring as keyboard
[    47.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    47.843] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    47.843] (**) Option "xkb_rules" "evdev"
[    47.843] (**) Option "xkb_model" "evdev"
[    47.843] (**) Option "xkb_layout" "us"
[    47.845] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    47.845] (II) No input driver/identifier specified (ignoring)
[    47.845] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    47.846] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    47.846] (II) Using input driver 'evdev' for 'Sleep Button'
[    47.846] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.846] (**) Sleep Button: always reports core events
[    47.846] (**) Sleep Button: Device: "/dev/input/event1"
[    47.851] (--) Sleep Button: Found keys
[    47.851] (II) Sleep Button: Configuring as keyboard
[    47.851] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    47.851] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    47.851] (**) Option "xkb_rules" "evdev"
[    47.851] (**) Option "xkb_model" "evdev"
[    47.851] (**) Option "xkb_layout" "us"
[    47.872] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event9)
[    47.872] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
[    47.873] (II) Using input driver 'evdev' for 'USB 2.0 PC Cam'
[    47.873] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.873] (**) USB 2.0 PC Cam: always reports core events
[    47.873] (**) USB 2.0 PC Cam: Device: "/dev/input/event9"
[    47.876] (--) USB 2.0 PC Cam: Found keys
[    47.876] (II) USB 2.0 PC Cam: Configuring as keyboard
[    47.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input9/event9"
[    47.876] (II) XINPUT: Adding extended input device "USB 2.0 PC Cam" (type: KEYBOARD)
[    47.876] (**) Option "xkb_rules" "evdev"
[    47.876] (**) Option "xkb_model" "evdev"
[    47.876] (**) Option "xkb_layout" "us"
[    47.880] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    47.880] (II) No input driver/identifier specified (ignoring)
[    47.881] (II) config/udev: Adding input device HDA NVidia Mic (/dev/input/event11)
[    47.881] (II) No input driver/identifier specified (ignoring)
[    47.882] (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event12)
[    47.882] (II) No input driver/identifier specified (ignoring)
[    47.900] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[    47.900] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    47.900] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    47.900] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.900] (**) Eee PC WMI hotkeys: always reports core events
[    47.900] (**) Eee PC WMI hotkeys: Device: "/dev/input/event7"
[    47.903] (--) Eee PC WMI hotkeys: Found keys
[    47.903] (II) Eee PC WMI hotkeys: Configuring as keyboard
[    47.903] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event7"
[    47.903] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[    47.903] (**) Option "xkb_rules" "evdev"
[    47.903] (**) Option "xkb_model" "evdev"
[    47.903] (**) Option "xkb_layout" "us"
[    47.906] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    47.906] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    47.906] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    47.906] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.906] (**) AT Translated Set 2 keyboard: always reports core events
[    47.906] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    47.910] (--) AT Translated Set 2 keyboard: Found keys
[    47.910] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    47.910] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    47.910] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    47.910] (**) Option "xkb_rules" "evdev"
[    47.910] (**) Option "xkb_model" "evdev"
[    47.910] (**) Option "xkb_layout" "us"
[    47.912] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    47.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    47.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    47.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    47.912] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    47.912] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    47.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    47.912] (**) Option "Device" "/dev/input/event5"
[    47.933] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5624
[    47.933] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754
[    47.933] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    47.933] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    47.933] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[    47.933] (**) Option "VertEdgeScroll" "1"
[    47.933] (**) Option "VertTwoFingerScroll" "1"
[    47.933] (**) Option "HorizTwoFingerScroll" "1"
[    47.933] (**) Option "TapButton1" "1"
[    47.933] (**) Option "TapButton2" "2"
[    47.934] (**) Option "TapButton3" "3"
[    47.934] (**) Option "CircularScrolling" "0"
[    47.941] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    47.941] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    47.950] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[    47.950] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    47.950] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    47.950] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    47.950] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    47.951] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    47.951] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    47.951] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    47.951] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    47.962] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    47.963] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    47.963] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    47.963] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    47.963] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    47.963] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    47.963] (**) Option "Device" "/dev/input/mouse0"
[    47.968] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range.  defaulting to 1615 - 5685
[    47.968] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range.  defaulting to 1729 - 4171
[    47.968] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.  defaulting to 0 - 256
[    47.968] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 16
[    47.988] (EE) Query no Synaptics: 6003C8
[    47.988] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[    47.989] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[    47.997] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[    47.997] (II) UnloadModule: "synaptics"
[    47.997] (II) Unloading synaptics
[    47.998] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    47.998] (II) No input driver/identifier specified (ignoring)
[    69.431] (II) Power Button: Close
[    69.431] (II) UnloadModule: "evdev"
[    69.431] (II) Unloading evdev
[    69.442] (II) Video Bus: Close
[    69.442] (II) UnloadModule: "evdev"
[    69.442] (II) Unloading evdev
[    69.458] (II) Power Button: Close
[    69.458] (II) UnloadModule: "evdev"
[    69.458] (II) Unloading evdev
[    69.474] (II) Sleep Button: Close
[    69.474] (II) UnloadModule: "evdev"
[    69.474] (II) Unloading evdev
[    69.490] (II) USB 2.0 PC Cam: Close
[    69.490] (II) UnloadModule: "evdev"
[    69.490] (II) Unloading evdev
[    69.506] (II) Eee PC WMI hotkeys: Close
[    69.506] (II) UnloadModule: "evdev"
[    69.506] (II) Unloading evdev
[    69.522] (II) AT Translated Set 2 keyboard: Close
[    69.522] (II) UnloadModule: "evdev"
[    69.522] (II) Unloading evdev
[    69.554] (II) UnloadModule: "synaptics"
[    69.554] (II) Unloading synaptics
[    71.406] 2 XSELINUXs still allocated at reset
[    71.406] SCREEN: 0 objects of 140 bytes = 0 total bytes 0 private allocs
[    71.406] COLORMAP: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.406] DEVICE: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[    71.406] CLIENT: 0 objects of 88 bytes = 0 total bytes 0 private allocs
[    71.406] WINDOW: 0 objects of 40 bytes = 0 total bytes 0 private allocs
[    71.406] PIXMAP: 1 objects of 76 bytes = 76 total bytes 0 private allocs
[    71.407] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[    71.407] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.407] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.407] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[    71.407] GLYPH: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[    71.407] SYNC_FENCE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.407] TOTAL: 1 objects, 76 bytes, 0 allocs
[    71.407] 1 SELECTIONs still allocated at reset
[    71.407] WINDOW: 0 objects of 40 bytes = 0 total bytes 0 private allocs
[    71.407] PIXMAP: 1 objects of 76 bytes = 76 total bytes 0 private allocs
[    71.407] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[    71.407] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.407] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.407] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[    71.407] GLYPH: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[    71.407] SYNC_FENCE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.407] TOTAL: 1 objects, 76 bytes, 0 allocs
[    71.407] 1 PIXMAPs still allocated at reset
[    71.407] PIXMAP: 1 objects of 76 bytes = 76 total bytes 0 private allocs
[    71.407] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[    71.407] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.408] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.408] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[    71.408] GLYPH: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[    71.408] SYNC_FENCE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[    71.408] TOTAL: 1 objects, 76 bytes, 0 allocs
[    71.417] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    71.417] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    71.417] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    71.417] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    71.417] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    71.417] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    71.417] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    71.417] (II) NVIDIA(0):     Config Options in the README.
[    71.419] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    72.804] (==) NVIDIA(0): Disabling shared memory pixmaps
[    72.804] (==) NVIDIA(0): DPMS enabled
[    72.805] (II) Loading sub module "dri2"
[    72.805] (II) LoadModule: "dri2"
[    72.807] (WW) Warning, couldn't open module dri2
[    72.807] (II) UnloadModule: "dri2"
[    72.807] (II) Unloading dri2
[    72.807] (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
[    72.807] (II) NVIDIA(0): The X server will not be able to send the VDPAU driver name to
[    72.807] (II) NVIDIA(0):     libvdpau.
[    72.807] (==) RandR enabled
[    72.812] (II) Initializing extension GLX
[    73.020] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    73.020] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    73.020] (II) Using input driver 'evdev' for 'Power Button'
[    73.020] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.020] (**) Power Button: always reports core events
[    73.020] (**) Power Button: Device: "/dev/input/event3"
[    73.029] (--) Power Button: Found keys
[    73.029] (II) Power Button: Configuring as keyboard
[    73.029] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    73.029] (**) Option "xkb_rules" "evdev"
[    73.029] (**) Option "xkb_model" "evdev"
[    73.029] (**) Option "xkb_layout" "us"
[    73.142] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    73.142] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    73.142] (II) Using input driver 'evdev' for 'Video Bus'
[    73.142] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.143] (**) Video Bus: always reports core events
[    73.143] (**) Video Bus: Device: "/dev/input/event8"
[    73.149] (--) Video Bus: Found keys
[    73.149] (II) Video Bus: Configuring as keyboard
[    73.149] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input8/event8"
[    73.149] (**) Option "xkb_rules" "evdev"
[    73.149] (**) Option "xkb_model" "evdev"
[    73.149] (**) Option "xkb_layout" "us"
[    73.156] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    73.156] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    73.156] (II) Using input driver 'evdev' for 'Power Button'
[    73.156] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.156] (**) Power Button: always reports core events
[    73.156] (**) Power Button: Device: "/dev/input/event2"
[    73.161] (--) Power Button: Found keys
[    73.161] (II) Power Button: Configuring as keyboard
[    73.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    73.161] (**) Option "xkb_rules" "evdev"
[    73.161] (**) Option "xkb_model" "evdev"
[    73.161] (**) Option "xkb_layout" "us"
[    73.163] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    73.163] (II) No input driver/identifier specified (ignoring)
[    73.164] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    73.164] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    73.164] (II) Using input driver 'evdev' for 'Sleep Button'
[    73.164] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.164] (**) Sleep Button: always reports core events
[    73.165] (**) Sleep Button: Device: "/dev/input/event1"
[    73.173] (--) Sleep Button: Found keys
[    73.173] (II) Sleep Button: Configuring as keyboard
[    73.173] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    73.173] (**) Option "xkb_rules" "evdev"
[    73.173] (**) Option "xkb_model" "evdev"
[    73.173] (**) Option "xkb_layout" "us"
[    73.186] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event9)
[    73.186] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
[    73.186] (II) Using input driver 'evdev' for 'USB 2.0 PC Cam'
[    73.186] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.186] (**) USB 2.0 PC Cam: always reports core events
[    73.186] (**) USB 2.0 PC Cam: Device: "/dev/input/event9"
[    73.193] (--) USB 2.0 PC Cam: Found keys
[    73.193] (II) USB 2.0 PC Cam: Configuring as keyboard
[    73.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input9/event9"
[    73.193] (**) Option "xkb_rules" "evdev"
[    73.193] (**) Option "xkb_model" "evdev"
[    73.193] (**) Option "xkb_layout" "us"
[    73.197] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    73.197] (II) No input driver/identifier specified (ignoring)
[    73.199] (II) config/udev: Adding input device HDA NVidia Mic (/dev/input/event11)
[    73.199] (II) No input driver/identifier specified (ignoring)
[    73.200] (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event12)
[    73.200] (II) No input driver/identifier specified (ignoring)
[    73.211] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[    73.211] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    73.211] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    73.211] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.211] (**) Eee PC WMI hotkeys: always reports core events
[    73.211] (**) Eee PC WMI hotkeys: Device: "/dev/input/event7"
[    73.217] (--) Eee PC WMI hotkeys: Found keys
[    73.217] (II) Eee PC WMI hotkeys: Configuring as keyboard
[    73.217] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event7"
[    73.217] (**) Option "xkb_rules" "evdev"
[    73.217] (**) Option "xkb_model" "evdev"
[    73.217] (**) Option "xkb_layout" "us"
[    73.220] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    73.220] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    73.220] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    73.220] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.220] (**) AT Translated Set 2 keyboard: always reports core events
[    73.220] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    73.225] (--) AT Translated Set 2 keyboard: Found keys
[    73.225] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    73.225] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    73.225] (**) Option "xkb_rules" "evdev"
[    73.225] (**) Option "xkb_model" "evdev"
[    73.225] (**) Option "xkb_layout" "us"
[    73.227] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    73.227] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    73.227] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    73.227] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    73.227] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    73.227] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    73.228] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    73.228] (**) Option "Device" "/dev/input/event5"
[    73.265] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5624
[    73.265] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754
[    73.265] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    73.265] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    73.265] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[    73.265] (**) Option "VertEdgeScroll" "1"
[    73.265] (**) Option "VertTwoFingerScroll" "1"
[    73.265] (**) Option "HorizTwoFingerScroll" "1"
[    73.265] (**) Option "TapButton1" "1"
[    73.265] (**) Option "TapButton2" "2"
[    73.265] (**) Option "TapButton3" "3"
[    73.265] (**) Option "CircularScrolling" "0"
[    73.297] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    73.297] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    73.313] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[    73.313] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    73.313] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    73.313] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    73.313] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    73.313] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    73.314] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    73.314] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    73.337] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    73.337] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    73.337] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    73.338] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    73.338] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    73.338] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    73.338] (**) Option "Device" "/dev/input/mouse0"
[    73.345] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range.  defaulting to 1615 - 5685
[    73.345] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range.  defaulting to 1729 - 4171
[    73.345] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.  defaulting to 0 - 256
[    73.345] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 16
[    73.366] (EE) Query no Synaptics: 6003C8
[    73.366] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[    73.366] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[    73.378] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[    73.378] (II) UnloadModule: "synaptics"
[    73.378] (II) Unloading synaptics
[    73.379] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    73.380] (II) No input driver/identifier specified (ignoring)


[kxp]

Did you get any error, warning messages when you tried to start your x server? Can you post your /var/log/Xorg.0.log if the next advices do not work? And what suggestions did you already try?
Look into

Code: Select all

/etc/conf.d/xdm

is DISPLAYMANAGER set to gdm?

You are sure you have the nvidia-driver for your kernel version installed?

Code: Select all

equo search linux-sabayon

Code: Select all

equo search nvidia-drivers

The kernel version is the same in nvidia drivers, and regarding to display manager is set as gdm.

EDIT: Didn't solve the problem

Generic troubleshooting follows:
Remove your xorg.conf

Code: Select all

rm /etc/X11/xorg.conf

Use the nvidia tool to generate a new xorg.conf

Code: Select all

nvidia-xconfig

Prevent the automatic x configuration service to overwrite your config each time your reboot.

Code: Select all

rc-update del x-setup boot

EDIT2: when I was removing x-setup from rc-update I foun xdm is starting on boot, shouldn't be gdm?

[popsUlfr]

I don't have KDE, only gnome.

Whoops, very sorry. I got the Threads confused my bad.

I put login name and password(its very ugly and have big letters), and the display turns black and then goes back to login screen.

Ps: popsUlfr i din't saw your message and i will try to do that.

So you get only the console when starting Sabayon and you don't see x starting?

EDIT2: when I was removing x-setup from rc-update I foun xdm is starting on boot, shouldn't be gdm?

Actually you specify which "environment" gets loaded by setting the DISPLAYMANAGER variable to your preferred well... display manager in /etc/conf.d/xdm. xdm is the service starting the x server which in turn loads your preferred graphical environment.

You basically get a text login prompt upon boot instead of the graphical one?
xdm service might not be on the boot runlevel

Code: Select all

rc-update add xdm boot

but why'd it be removed all of the sudden ?

[kxp]

I have a "grafical" login and a litlle console in right down corner, and I belive that X is starting, because when I in console, using Crtl+Alt+F1 and type startx I get an error telling me that X is already started.
xdm is on boot level, and I didn't add it.

[popsUlfr]

I have a "grafical" login and a litlle console in right down corner, and I belive that X is starting, because when I in console, using Crtl+Alt+F1 and type startx I get an error telling me that X is already started.
xdm is on boot level, and I didn't add it.

Ok so the problem at hand is the login manager not accepting your password? Because the x server seems to be alright if you get to your graphical login manager. And what is this console in the corner? I'm intrigued.