Sorry if this is the wrong place to post the error. I'm new to Sabayon, but not to Linux (I mostly use Mandriva). I have tried to install Sabayon to my laptop, which is a Dell Inspiron, but when I get to the prompt "Write changes to disk?", I get the following error (this is only the head and tail of the error message):
- Code: Select all
anaconda 14.3 exception report
Traceback (most recent call first):
File "/usr/lib/python2.6/site-packages/pyanaconda/storage/formats/disklabel.py", line 245, in commit
raise DiskLabelCommitError(msg)
File "/usr/lib/python2.6/site-packages/pyanaconda/storage/devices.py", line 1343, in destroy
self.disk.format.commit()
File "/usr/lib/python2.6/site-packages/pyanaconda/storage/deviceaction.py", line 218, in execute
self.device.destroy()
File "/usr/lib/python2.6/site-packages/pyanaconda/storage/devicetree.py", line 684, in processActions
action.execute(intf=self.intf)
File "/usr/lib/python2.6/site-packages/pyanaconda/storage/__init__.py", line 295, in doIt
self.devicetree.processActions()
File "/usr/lib/python2.6/site-packages/pyanaconda/packages.py", line 109, in turnOnFilesystems
anaconda.storage.doIt()
File "/usr/lib/python2.6/site-packages/pyanaconda/dispatch.py", line 208, in moveStep
rc = stepFunc(self.anaconda)
File "/usr/lib/python2.6/site-packages/pyanaconda/dispatch.py", line 129, in gotoNext
self.moveStep()
File "/usr/lib/python2.6/site-packages/pyanaconda/gui.py", line 1248, in nextClicked
self.anaconda.dispatch.gotoNext()
DiskLabelCommitError: Could not co[ 0.814587] vesafb: scrolling: redraw
[ 0.814590] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.826880] Console: switching to colour frame buffer device 128x48
[ 0.949609] fbcondecor: console 0 using theme 'sabayon'
[ 1.013126] fbcondecor: switched decor state to 'on' on console 0
[ 1.013795] fb0: VESA VGA frame buffer device
[ 1.014039] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.015313] ACPI: Lid Switch [LID]
[ 1.015391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.015396] ACPI: Power Button [PBTN]
[ 1.015467] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.015471] ACPI: Sleep Button [SBTN]
[ 1.015710] Monitor-Mwait will be used to enter C-1 state
[ 1.015733] Monitor-Mwait will be used to enter C-2 state
[ 1.015738] Marking TSC unstable due to TSC halts in idle
[ 1.015806] Switching to clocksource hpet
[ 1.029496] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.029504] ACPI: Thermal Zone [THM] (59 C)
[ 1.029552] isapnp: Scanning for PnP cards...
[ 1.342516] isapnp: No Plug & Play device found
[ 1.342520] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.343361] Floppy drive(s): fd0 is 1.44M
[ 4.354091] floppy0: no floppy controllers found
[ 4.355865] brd: module loaded
[ 4.363470] loop: module loaded
[ 4.363473] Compaq SMART2 Driver (v 2.6.0)
[ 4.363554] HP CISS Driver (v 3.6.20)
[ 4.363953] MM: desc_per_page = 128
[ 4.364303] Loading iSCSI transport class v2.0-870.
[ 4.364757] fnic: Cisco FCoE HBA Driver, ver 1.4.0.98
[ 4.365022] iscsi: registered transport (tcp)
[ 4.366291] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 4.366293] Detecting Adaptec I2O RAID controllers...
[ 4.367040] Adaptec aacraid driver 1.1-5[24702]-ms
[ 4.367606] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 4.367866] NCR53c406a: no available ports found
[ 4.367869] sym53c416.c: Version 1.0.0-ac
[ 4.367889] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 4.367952] QLogic Fibre Channel HBA Driver: 8.03.02-k2
[ 4.368183] iscsi: registered transport (qla4xxx)
[ 4.368233] QLogic iSCSI HBA Driver
[ 4.368235] Emulex LightPulse Fibre Channel SCSI driver 8.3.10
[ 4.368236] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 4.390035] Failed initialization of WD-7000 SCSI card!
[ 4.894258] DC390: clustering now enabled by default. If you get problems load
[ 4.894260] with "disable_clustering=1" and report to maintainers
[ 4.894356] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 4.894451] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 4.894496] megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
[ 4.894544] mpt2sas version 04.100.01.00 loaded
[ 4.894706] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 4.894841] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 4.894888] 3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
[ 4.894938] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 4.894988] nsp32: loading...
[ 4.895038] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
[ 4.895093] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 4.895141] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 4.895237] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 4.895293] iscsi: registered transport (cxgb3i)
[ 4.895297] Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.0 (Dec 06, 2009)
[ 4.895342] iscsi: registered transport (bnx2i)
[ 4.895345] VMware PVSCSI driver - version 1.0.1.0-k
[ 4.895397] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 4.895480] osst :I: Tape driver with OnStream support version 0.99.4
[ 4.895481] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 4.895768] ahci 0000:00:1f.2: version 3.0
[ 4.895786] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.895826] alloc irq_desc for 28 on node -1
[ 4.895828] alloc kstat_irqs on node -1
[ 4.895840] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 4.895890] ahci: SSS flag set, parallel bus scan disabled
[ 4.895930] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.895934] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[ 4.895940] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.901322] scsi2 : ahci
[ 4.901529] scsi3 : ahci
[ 4.901653] scsi4 : ahci
[ 4.901782] scsi5 : ahci
[ 4.901912] scsi6 : ahci
[ 4.902047] scsi7 : ahci
[ 4.902596] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 28
[ 4.902600] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 28
[ 4.902603] ata3: DUMMY
[ 4.902604] ata4: DUMMY
[ 4.902607] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 28
[ 4.902611] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 28
[ 4.905539] scsi8 : pata_legacy
[ 4.905640] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 5.207030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.252584] ata1.00: ATA-8: WDC WD1600BEVT-75ZCT2, 11.01A11, max UDMA/133
[ 5.252587] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 5.253989] ata1.00: configured for UDMA/133
[ 5.264122] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVT-7 11.0 PQ: 0 ANSI: 5
[ 5.264371] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.264421] sd 2:0:0:0: [sda] Write Protect is off
[ 5.264424] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.264446] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.264471] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 5.264631] sda: sda1 sda2 < sda5 sda6 >
[ 5.298729] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.987033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.999634] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633B, D400, max UDMA/100
[ 5.999649] ata2.00: applying bridge limits
[ 6.012867] ata2.00: configured for UDMA/100
[ 6.024664] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633B D400 PQ: 0 ANSI: 5
[ 6.029047] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.029050] Uniform CD-ROM driver Revision: 3.20
[ 6.029191] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 6.029320] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 6.334027] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.650026] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.661281] scsi9 : pata_legacy
[ 6.661374] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 6.812557] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.1 (Feb 22, 2010)
[ 6.812680] I2O subsystem v1.325
[ 6.812682] i2o: max drivers = 8
[ 6.812841] I2O Configuration OSM v1.323
[ 6.812948] I2O Bus Adapter OSM v1.317
[ 6.812982] I2O Block Device OSM v1.325
[ 6.813170] I2O SCSI Peripheral OSM v1.316
[ 6.813204] I2O ProcFS OSM v1.316
[ 6.813241] Fusion MPT base driver 3.04.14
[ 6.813243] Copyright (c) 1999-2008 LSI Corporation
[ 6.813250] Fusion MPT SPI Host driver 3.04.14
[ 6.813303] Fusion MPT FC Host driver 3.04.14
[ 6.813350] Fusion MPT SAS Host driver 3.04.14
[ 6.813397] Fusion MPT misc device (ioctl) driver 3.04.14
[ 6.813465] mptctl: Registered with Fusion MPT base driver
[ 6.813467] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 6.813469] Fusion MPT LAN driver 3.04.14
[ 6.813555] usbmon: debugfs is not available
[ 6.813557] Initializing USB Mass Storage driver...
[ 6.813600] usbcore: registered new interface driver usb-storage
[ 6.813602] USB Mass Storage support registered.
[ 6.813644] usbcore: registered new interface driver libusual
[ 6.813682] usbcore: registered new interface driver ums-alauda
[ 6.813718] usbcore: registered new interface driver ums-cypress
[ 6.813755] usbcore: registered new interface driver ums-datafab
[ 6.813792] usbcore: registered new interface driver ums-freecom
[ 6.813829] usbcore: registered new interface driver ums-isd200
[ 6.813866] usbcore: registered new interface driver ums-jumpshot
[ 6.813902] usbcore: registered new interface driver ums-karma
[ 6.813939] usbcore: registered new interface driver ums-onetouch
[ 6.813977] usbcore: registered new interface driver ums-sddr09
[ 6.814016] usbcore: registered new interface driver ums-sddr55
[ 6.814058] usbcore: registered new interface driver ums-usbat
[ 6.814163] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 6.829583] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 6.841742] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.841748] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 6.841777] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 6.841780] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 6.841783] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 6.842093] mice: PS/2 mouse device common for all mice
[ 6.842937] rtc_cmos 00:04: RTC can wake from S4
[ 6.843027] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 6.843060] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.843101] md: linear personality registered for level -1
[ 6.843104] md: raid0 personality registered for level 0
[ 6.843106] md: raid1 personality registered for level 1
[ 6.843108] md: raid10 personality registered for level 10
[ 6.843110] md: raid6 personality registered for level 6
[ 6.843112] md: raid5 personality registered for level 5
[ 6.843114] md: raid4 personality registered for level 4
[ 6.843116] md: multipath personality registered for level -4
[ 6.843118] md: faulty personality registered for level -5
[ 6.843443] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 6.843599] EDAC MC: Ver: 2.1.0 May 31 2010
[ 6.844117] EISA: Probing bus 0 at eisa.0
[ 6.844119] EISA: Cannot allocate resource for mainboard
[ 6.844122] Cannot allocate resource for EISA slot 1
[ 6.844124] Cannot allocate resource for EISA slot 2
[ 6.844125] Cannot allocate resource for EISA slot 3
[ 6.844127] Cannot allocate resource for EISA slot 4
[ 6.844129] Cannot allocate resource for EISA slot 5
[ 6.844131] Cannot allocate resource for EISA slot 6
[ 6.844133] Cannot allocate resource for EISA slot 7
[ 6.844135] Cannot allocate resource for EISA slot 8
[ 6.844137] EISA: Detected 0 cards.
[ 6.844472] cpuidle: using governor ladder
[ 6.844934] cpuidle: using governor menu
[ 6.845110] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.846595] usbcore: registered new interface driver hiddev
[ 6.846644] usbcore: registered new interface driver usbhid
[ 6.846645] usbhid: USB HID core driver
[ 6.846863] TCP bic registered
[ 6.846866] NET: Registered protocol family 17
[ 6.848918] Using IPI No-Shortcut mode
[ 6.849239] TuxOnIce 3.1 (http://tuxonice.net)
[ 6.849298] Scanning swap devices for TuxOnIce signature...
[ 6.868546] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 7.134631] - Trying 8:5.
[ 7.224481] TuxOnIce scan: No image found.
[ 7.769822] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input4
[ 7.796321] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input5
[ 7.927019] Scanning swap devices for TuxOnIce signature...
[ 8.020253] - Trying 8:5.
[ 8.121454] TuxOnIce scan: No image found.
[ 8.121584] TuxOnIce: No image found.
[ 8.121990] registered taskstats version 1
[ 8.122637] rtc_cmos 00:04: setting system clock to 2010-09-24 16:17:36 UTC (1285345056)
[ 8.122736] Freeing unused kernel memory: 624k freed
[ 8.769079] scsi: <fdomain> Detection failed (no card)
[ 8.833866] imm: Version 2.05 (for Linux 2.4.0)
[ 8.920001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.920053] alloc irq_desc for 22 on node -1
[ 8.920055] alloc kstat_irqs on node -1
[ 8.920061] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 8.920079] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 8.920083] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 8.920108] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 8.920136] ehci_hcd 0000:00:1a.7: debug port 1
[ 8.924027] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 8.924044] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 8.934301] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 8.934805] hub 1-0:1.0: USB hub found
[ 8.934811] hub 1-0:1.0: 6 ports detected
[ 8.935031] alloc irq_desc for 20 on node -1
[ 8.935033] alloc kstat_irqs on node -1
[ 8.935040] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.935057] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8.935061] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.935070] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 8.935098] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.938980] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 8.938995] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 8.948300] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.948606] hub 2-0:1.0: USB hub found
[ 8.948611] hub 2-0:1.0: 6 ports detected
[ 8.976112] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.976193] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.976203] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 8.976207] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 8.976225] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 8.976273] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 8.976601] hub 3-0:1.0: USB hub found
[ 8.976607] hub 3-0:1.0: 2 ports detected
[ 8.976880] alloc irq_desc for 21 on node -1
[ 8.976883] alloc kstat_irqs on node -1
[ 8.976892] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 8.976900] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 8.976904] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 8.976913] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 8.976953] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 8.977248] hub 4-0:1.0: USB hub found
[ 8.977264] hub 4-0:1.0: 2 ports detected
[ 8.977584] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 8.977592] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 8.977596] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 8.977605] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 8.977637] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 8.977912] hub 5-0:1.0: USB hub found
[ 8.977917] hub 5-0:1.0: 2 ports detected
[ 8.978273] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.978282] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.978286] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.978294] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 8.978327] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 8.978612] hub 6-0:1.0: USB hub found
[ 8.978617] hub 6-0:1.0: 2 ports detected
[ 8.978955] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 8.978964] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.978967] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.978976] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 8.979009] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 8.979305] hub 7-0:1.0: USB hub found
[ 8.979311] hub 7-0:1.0: 2 ports detected
[ 8.979646] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 8.979657] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.979660] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.979669] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 8.979701] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 8.979972] hub 8-0:1.0: USB hub found
[ 8.979977] hub 8-0:1.0: 2 ports detected
[ 9.001572] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.024611] sl811: driver sl811-hcd, 19 May 2005
[ 9.110596] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 9.110598] Copyright (c) 1999-2006 Intel Corporation.
[ 9.237065] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 9.368047] scsi10 : usb-storage 1-5:1.0
[ 10.370535] scsi 10:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 10.371898] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 10.375773] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 16.834175] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 16.836509] ISO 9660 Extensions: RRIP_1991A
[ 17.058594] aufs test_add:256:mount[4783]: uid/gid/perm /newroot/mnt/livecd 0/0/0755, 0/0/01777
[ 37.928671] udev: starting version 154
[ 38.200695] lib80211: common routines for IEEE802.11 drivers
[ 38.200699] lib80211_crypt: registered algorithm 'NULL'
[ 39.799836] ACPI: AC Adapter [AC] (on-line)
[ 39.943338] iTCO_vendor_support: vendor-support=0
[ 40.013463] sky2: driver version 1.27
[ 40.013537] sky2 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 40.013554] sky2 0000:09:00.0: setting latency timer to 64
[ 40.013596] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 40.013705] alloc irq_desc for 29 on node -1
[ 40.013707] alloc kstat_irqs on node -1
[ 40.013725] sky2 0000:09:00.0: irq 29 for MSI/MSI-X
[ 40.013926] sky2 0000:09:00.0: eth0: addr 00:23:ae:3b:3d:d3
[ 40.217727] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
[ 40.217731] atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
[ 40.232827] ACPI: Battery Slot [BAT0] (battery present)
[ 40.496124] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 40.496687] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 40.509205] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
[ 40.509696] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 41.751143] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 41.752058] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 41.778589] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 41.888077] input: Dell WMI hotkeys as /devices/virtual/input/input7
[ 43.542321] wl: module license 'MIXED/Proprietary' taints kernel.
[ 43.542325] Disabling lock debugging due to kernel taint
[ 43.548625] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 43.548638] wl 0000:0c:00.0: setting latency timer to 64
[ 43.729473] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 43.750848] [drm] Initialized drm 1.1.0 20060810
[ 44.136667] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 44.139293] alloc irq_desc for 30 on node -1
[ 44.139295] alloc kstat_irqs on node -1
[ 44.139309] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 44.139342] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 44.228204] lib80211_crypt: registered algorithm 'TKIP'
[ 44.228562] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36
[ 44.557958] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 44.561824] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 44.561933] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 44.574322] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 44.574327] i915 0000:00:02.0: setting latency timer to 64
[ 44.591523] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 44.591527] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 44.591589] alloc irq_desc for 31 on node -1
[ 44.591591] alloc kstat_irqs on node -1
[ 44.591600] i915 0000:00:02.0: irq 31 for MSI/MSI-X
[ 44.591607] [drm] set up 31M of stolen space
[ 45.232428] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 45.232486] Console: switching to colour dummy device 80x25
[ 45.232876] Console: switching to colour frame buffer device 170x48
[ 45.650564] fb0: inteldrmfb frame buffer device
[ 45.650567] registered panic notifier
[ 45.667873] acpi device:39: registered as cooling_device2
[ 45.669560] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input11
[ 45.669740] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 45.669767] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 45.670029] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
I have also tried the SpinBase CD and I get the same error. Any help or suggestion would be greatly appreciated.
