Je n'arrive plus à lancer CompizFusion !

[Le Viking]

Salut à tous,
Je suis nouveau dans la maison Sabayon, mais plus tout à fait dans le monde Linux... Toujours est-il qu'en relançant ma session habituelle, aujourd'hui, je ne suis plus parvenu à lancer Compiz, ni Beryl, ni bureau 3D... Je ne comprends pas ! Ma carte Nvidia GeForce 8500 est pourtant parfaitement reconnue, et tout ça marchait encore parfaitement hier. Les effets 3D se lançaient même par défaut au démarrage.
Je viens d'aller voir mon fichier Xorg.conf, et tout me semble normal dedans. Bref, je pige pas. Des idées ?


Mon fichier /etc/X11/xorg.conf :


#FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/corefonts"

EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************

Section "Module"

Load "dbe"
Load "i2c"
Load "glx"
Load "ddc"
Load "type1"
Load "freetype"
Load "extmod"
Load "synaptics"
Load "vbe"
# Load "dri"

EndSection


# **********************************************************************
# Server flags section. This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"

Option "AllowMouseOpenFail" "true"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"
Identifier "Synaptics1"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
# For ALPS/MacBook TouchPads
#Option "MaxSpeed" "0.7"
#Option "MinSpeed" "0.18"
#Option "AccelFactor" "0.08"
#Option "TopEdge" "120"
#Option "LeftEdge" "120"
#Option "BottomEdge" "830"
#Option "RightEdge" "650"
#Option "FingerLow" "25"
#Option "FingerHigh" "30"
# MacBook touchpad
#Option "MaxTapTime" "180"
#Option "MaxTapMove" "220"
#Option "MaxDoubleTapTime" "180"
#Option "VertScrollDelta" "20"
#Option "HorizScrollDelta" "50"
#Option "TapButton2" "3"
#Option "TapButton3" "2"
#Option "VertTwoFingerScroll" "1"

# Do you keep moving the mouse while typing? Try this trick.
#synclient TouchpadOff=1 disable your synaptics touchpad
#synclient TouchpadOff=0 enable your synaptics touchpad
EndSection


Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

Option "AutoRepeat" "500 5"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbRules" "xorg"
# Macintosh keyboard
#Option "XkbOptions" "lv3:rwin_switch"

EndSection


Section "InputDevice"
Driver "wacom"
Identifier "wacom1"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "wacom2"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "wacom3"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"

Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Generic Monitor"
#Option "DPMS"

VertRefresh 43 - 60
HorizSync 28 - 80

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
Identifier "VESA"
Driver "nvidia" # do not remove vesa
#Option "RenderAccel" "on"
Option "XAANoOffscreenPixmaps"
#Option "BusType" "PCI"
#Option "ColorTiling" "on"
#Option "EnablePageFlip" "on"
EndSection


# **********************************************************************
# Screen sections.
# **********************************************************************

Section "Screen"

# The Identifier, Device and Monitor lines must be present

Identifier "Screen 1"
Device "VESA"
Monitor "Generic Monitor"
Option "AddARGBGLXVisuals" "true"

# The favoured Depth and/or Bpp may be specified here

DefaultDepth 24

SubSection "Display"
Depth 8
ViewPort 0 0
#Modes "1024x768" "800x600" "640x480"
EndSubsection

SubSection "Display"
Depth 16
ViewPort 0 0
#Modes "1024x768" "800x600" "640x480"
EndSubsection

SubSection "Display"
Depth 24
ViewPort 0 0
#Modes "1024x768" "800x600" "640x480"
EndSubsection


EndSection


Section "ServerLayout"
# The Identifier line must be present

Identifier "Main Layout"
Screen 0 "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
#InputDevice "Synaptics1" "SendCoreEvents"
#InputDevice "wacom1" "SendCoreEvents"
#InputDevice "wacom2" "SendCoreEvents"
#InputDevice "wacom3" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection



Je trouve quand même bizarre de ne plus y trouver la résolution native de mon 19 pouces, à savoir 1280x1024 !

[turquoise]

Pour le xorg et la résolution, je dirais de le rajouter à la main. Pour Compiz, je ne sais pas trop, en ouvrant une console pour le lancer manuellement avec l'option --replace, ça fait quoi?

[Le Viking]

Salut Turquoise et merci pour ta réponse !

Pour ce qui est de rajouter la définition de mon écran "à la main", j'y ai certes pensé (il m'est déjà arrivé d'avoir à le faire dans d'autres distributions), mais je n'y suis pas arrivé : à la différence d'Ubuntu, quand je fais un "nano /etc/X /xorg.conf", le résultat s'affiche dans le terminal, et non pas dans une nouvelle fenêtre. Du coup, c'est idiot, mais je ne pige pas comment sauvegarder des modifs...

[Le Viking]

PS : la commande compiz--replace me renvoie un message d'erreur : "command not found" !!

[t_anderson]

Il faut faire

Code: Select all

compiz --replace

Et ensuite essaie de faire un

Code: Select all

compiz restart