Problem with Video, USB and webcam

[Revolver]

Hi all!

i need assistance about a problem with my laptop an HP Pavilion g6-1352el :
my problem is that i have got 2 usb ports that doesn't work at all. I've tried to connect a mouse and some usb pen drive without success.
this is my lspci output

Code: Select all

revbook revolver # lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse


to make sabayon start i must set pci=acpi option in the boot.cfg. if i remove the option or if i set "nomodeset" option i've got a beautiful black screen.

I've tried to set the opengl to 1:

Code: Select all

revbook revolver # eselect opengl list
Available OpenGL implementations:
  [1]   ati
  [2]   xorg-x11 *
  [3]   nvidia


to use the ati drivers without success. i've got 2 different video cards:

Code: Select all

revbook revolver # lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6400M/7400M Series]


i suppose that is a acpi problem because with my old laptop (a dell inspiron) i never had any problem like this.

Can someone help me?

--- SORRY FOR MY ENGLISH!! ---

[Ryuno-Ki]

i suppose that is a acpi problem because with my old laptop (a dell inspiron) i never had any problem like this.

Maybe not related to your problem, but I'm using an old HP Pavillion computer with four USB-Ports on the backside.
I've tried to plugin a 5th USB pen drive, but found a message in my dmesg that my board isn't able to handle it.
So maybe you have the same problem?

[Revolver]

i've not see dmesg log to check the errors.
But i rely it to a acpi problem. but i see the hub via lsusb.
I don't know why if i plug in a pen drive i the other usb ports does not work at all.

At the moment, i have only 1 usb port working.

[joost]

Which kernel? What repositories?

[Ryuno-Ki]

I don't know why if i plug in a pen drive i the other usb ports does not work at all.

There are "smart" manufactures, who put two usb ports on one plate, so both have to share the same electricity. Hence sometimes it's useful to change the port (not next to each other). But if you have just one port in usage, this is not your problem's source.

[Revolver]

Which kernel? What repositories?

kernel:

Code: Select all

revolver@revbook ~ $ uname -r
3.7.0-sabayon


default repos (not change since installation).

dmesg:

Code: Select all

revbook revolver # dmesg
[    1.256691] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.256713] ACPI: Battery Slot [BAT0] (battery present)
[    1.259553] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    1.259577] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.259581] [drm] Driver supports precise vblank timestamp query.
[    1.259649] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.259653] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    1.393478] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    1.452274] fbcon: inteldrmfb (fb0) is primary device
[    2.143562] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.143567] Switching to clocksource tsc
[    2.145379] Console: switching to colour frame buffer device 170x48
[    2.156562] fb0: inteldrmfb frame buffer device
[    2.156566] drm: registered panic notifier
[    2.156773] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.157186] usbcore: registered new interface driver udl
[    2.161796] brd: module loaded
[    2.164248] loop: module loaded
[    2.164254] Compaq SMART2 Driver (v 2.6.0)
[    2.164390] HP CISS Driver (v 3.6.26)
[    2.165025] MM: desc_per_page = 128
[    2.165495] Loading iSCSI transport class v2.0-870.
[    2.166504] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
[    2.166991] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    2.166995] Detecting Adaptec I2O RAID controllers...
[    2.167259] Adaptec aacraid driver 1.2-0[29800]-ms
[    2.167427] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    2.167629] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[    2.167934] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.07-k.
[    2.168105] iscsi: registered transport (qla4xxx)
[    2.168178] QLogic iSCSI HBA Driver
[    2.168183] Emulex LightPulse Fibre Channel SCSI driver 8.3.35
[    2.168186] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    2.168690] DC390: clustering now enabled by default. If you get problems load
[    2.168694]        with "disable_clustering=1" and report to maintainers
[    2.168852] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    2.168963] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    2.169041] megasas: 06.504.01.00-rc1 Mon. Oct. 1 17:00:00 PDT 2012
[    2.169131] mpt2sas version 14.100.00.00 loaded
[    2.169381] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    2.169609] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    2.169688] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    2.169762] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    2.169838] ipr: IBM Power RAID SCSI Device Driver version: 2.5.4 (July 11, 2012)
[    2.169920] RocketRAID 3xxx/4xxx Controller driver v1.6 (091225)
[    2.169994] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    2.170157] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[    2.170163] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[    2.170166] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[    2.170248] iscsi: registered transport (cxgb3i)
[    2.170252] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[    2.170328] iscsi: registered transport (cxgb4i)
[    2.170333] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
[    2.170407] iscsi: registered transport (bnx2i)
[    2.170549] VMware PVSCSI driver - version 1.0.2.0-k
[    2.170642] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    2.170768] osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    2.171177] ahci 0000:00:1f.2: version 3.0
[    2.171211] ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
[    2.171316] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    2.181542] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    2.181553] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    2.181564] ahci 0000:00:1f.2: setting latency timer to 64
[    2.185567] scsi0 : ahci
[    2.185822] scsi1 : ahci
[    2.186053] scsi2 : ahci
[    2.186291] scsi3 : ahci
[    2.186549] scsi4 : ahci
[    2.186777] scsi5 : ahci
[    2.186971] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 42
[    2.186975] ata2: DUMMY
[    2.186979] ata3: DUMMY
[    2.186982] ata4: DUMMY
[    2.186987] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 42
[    2.186991] ata6: DUMMY
[    2.192371] libphy: Fixed MDIO Bus: probed
[    2.192458] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.14 (Sep 30, 2012)
[    2.192785] I2O subsystem v1.325
[    2.192791] i2o: max drivers = 8
[    2.193035] I2O Configuration OSM v1.323
[    2.193220] I2O Bus Adapter OSM v1.317
[    2.193280] I2O Block Device OSM v1.325
[    2.193534] I2O SCSI Peripheral OSM v1.316
[    2.193597] I2O ProcFS OSM v1.316
[    2.193663] Fusion MPT base driver 3.04.20
[    2.193666] Copyright (c) 1999-2008 LSI Corporation
[    2.193677] Fusion MPT SPI Host driver 3.04.20
[    2.193760] Fusion MPT FC Host driver 3.04.20
[    2.193845] Fusion MPT SAS Host driver 3.04.20
[    2.193933] Fusion MPT misc device (ioctl) driver 3.04.20
[    2.194034] mptctl: Registered with Fusion MPT base driver
[    2.194040] mptctl: /dev/mptctl @ (major,minor=10,220)
[    2.194044] Fusion MPT LAN driver 3.04.20
[    2.194298] Initializing USB Mass Storage driver...
[    2.194381] usbcore: registered new interface driver usb-storage
[    2.194384] USB Mass Storage support registered.
[    2.194449] usbcore: registered new interface driver ums-alauda
[    2.194533] usbcore: registered new interface driver ums-cypress
[    2.194602] usbcore: registered new interface driver ums-datafab
[    2.194669] usbcore: registered new interface driver ums-freecom
[    2.194733] usbcore: registered new interface driver ums-isd200
[    2.194798] usbcore: registered new interface driver ums-jumpshot
[    2.194867] usbcore: registered new interface driver ums-karma
[    2.194935] usbcore: registered new interface driver ums-onetouch
[    2.194997] usbcore: registered new interface driver ums-sddr09
[    2.195065] usbcore: registered new interface driver ums-sddr55
[    2.195131] usbcore: registered new interface driver ums-usbat
[    2.195336] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.206050] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.206063] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.206579] mousedev: PS/2 mouse device common for all mice
[    2.207365] rtc_cmos 00:06: RTC can wake from S4
[    2.207703] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.207747] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.207818] md: linear personality registered for level -1
[    2.207823] md: raid0 personality registered for level 0
[    2.207827] md: raid1 personality registered for level 1
[    2.207831] md: raid10 personality registered for level 10
[    2.207835] md: raid6 personality registered for level 6
[    2.207838] md: raid5 personality registered for level 5
[    2.207842] md: raid4 personality registered for level 4
[    2.207846] md: multipath personality registered for level -4
[    2.207850] md: faulty personality registered for level -5
[    2.208351] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    2.208952] cpuidle: using governor ladder
[    2.209232] cpuidle: using governor menu
[    2.209248] ledtrig-cpu: registered to indicate activity on CPUs
[    2.209430] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    2.211412] usbcore: registered new interface driver usbhid
[    2.211416] usbhid: USB HID core driver
[    2.211920] ashmem: initialized
[    2.212354] TCP: bic registered
[    2.212360] NET: Registered protocol family 17
[    2.212500] Key type dns_resolver registered
[    2.219548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.491278] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.491324] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.492475] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OCA1G, max UDMA/100
[    2.492487] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.506261] ata5.00: ATAPI: hp       CDDVDW SN-208BB, HH01, max UDMA/100
[    2.510547] ata5.00: configured for UDMA/100
[    2.656330] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.822831] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.822847] ata1.00: configured for UDMA/100
[    2.823314] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
[    2.824242] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.824445] sd 0:0:0:0: [sda] Write Protect is off
[    2.824461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.824558] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.824563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.827398] scsi 4:0:0:0: CD-ROM            hp       CDDVDW SN-208BB  HH01 PQ: 0 ANSI: 5
[    2.835360] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.835370] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.835872] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.836295] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.928851]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    2.931044] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.931083] registered taskstats version 1
[    2.932295] rtc_cmos 00:06: setting system clock to 2013-03-24 12:24:29 UTC (1364127869)
[    2.934883] Freeing unused kernel memory: 644k freed
[    3.979303] scsi6 : pata_legacy
[    3.979668] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    4.133377] scsi7 : pata_legacy
[    4.133722] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    4.624045] scsi: <fdomain> Detection failed (no card)
[    4.759155] imm: Version 2.05 (for Linux 2.4.0)
[    4.965863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.966090] ehci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[    4.966167] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.966178] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    4.966429] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.966487] ehci_hcd 0000:00:1a.0: debug port 2
[    4.970407] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    4.970436] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3609000
[    4.977450] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.977499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.977505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.977511] usb usb1: Product: EHCI Host Controller
[    4.977517] usb usb1: Manufacturer: Linux 3.7.0-sabayon ehci_hcd
[    4.977522] usb usb1: SerialNumber: 0000:00:1a.0
[    4.978157] hub 1-0:1.0: USB hub found
[    4.978178] hub 1-0:1.0: 2 ports detected
[    4.978414] ehci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[    4.978475] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.978486] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    4.978831] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.978858] ehci_hcd 0000:00:1d.0: debug port 2
[    4.982781] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    4.982804] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc3608000
[    4.988491] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.988537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.988545] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.988551] usb usb2: Product: EHCI Host Controller
[    4.988556] usb usb2: Manufacturer: Linux 3.7.0-sabayon ehci_hcd
[    4.988561] usb usb2: SerialNumber: 0000:00:1d.0
[    4.989324] hub 2-0:1.0: USB hub found
[    4.989345] hub 2-0:1.0: 2 ports detected
[    5.046338] uhci_hcd: USB Universal Host Controller Interface driver
[    5.086197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.279147] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    5.393411] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    5.393422] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.394007] hub 1-1:1.0: USB hub found
[    5.394157] hub 1-1:1.0: 6 ports detected
[    5.496904] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    5.700493] JFS: nTxBlock = 8192, nTxLock = 65536
[    5.797705] RPC: Registered named UNIX socket transport module.
[    5.797717] RPC: Registered udp transport module.
[    5.797722] RPC: Registered tcp transport module.
[    5.797728] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.861905] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    6.011007] SPL: Loaded module v0.6.0-rc11
[    6.014262] zunicode: module license 'CDDL' taints kernel.
[    6.014270] Disabling lock debugging due to kernel taint
[    6.121975] ZFS: Loaded module v0.6.0-rc12, ZFS pool version 28, ZFS filesystem version 5
[    6.178147] fuse init (API version 7.20)
[    6.235999] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.236008] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.361235] iscsi: registered transport (tcp)
[    8.537017] PM: Starting manual resume from disk
[    8.931293] VFS: could not find a valid V7 on sda7.
[    8.932643] UDF-fs: warning (device sda7): udf_fill_super: No partition found (1)
[    8.932968] EXT2-fs (sda7): error: couldn't mount because of unsupported optional features (240)
[    8.933133] EXT3-fs (sda7): error: couldn't mount because of unsupported optional features (240)
[    8.982760] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   12.253959] systemd-udevd[7381]: starting version 197
[   13.190579] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   13.266279] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[   13.266294] mei 0000:00:16.0: setting latency timer to 64
[   13.266450] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[   13.277317] mei 0000:00:16.0: wd: failed to find the client
[   13.343198] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[   13.343217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.343229] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   13.343257] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.WMID.GPIO 2 (20120913/utaddress-251)
[   13.343272] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.GPIO 3 (20120913/utaddress-251)
[   13.343285] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 4 (20120913/utaddress-251)
[   13.343299] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 5 (20120913/utaddress-251)
[   13.343313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.343321] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   13.343334] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.WMID.GPIO 2 (20120913/utaddress-251)
[   13.343348] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.GPIO 3 (20120913/utaddress-251)
[   13.343361] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 4 (20120913/utaddress-251)
[   13.343373] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 5 (20120913/utaddress-251)
[   13.343387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.343394] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   13.343499] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.WMID.GPIO 2 (20120913/utaddress-251)
[   13.343513] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.GPIO 3 (20120913/utaddress-251)
[   13.343525] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 4 (20120913/utaddress-251)
[   13.343539] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 5 (20120913/utaddress-251)
[   13.343551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.343556] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.708093] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[   13.864548] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[   13.865388] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[   13.866164] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[   13.867161] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   14.257623] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 706145
[   14.307944] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[   14.402929] kvm: disabled by bios
[   14.578321] iTCO_vendor_support: vendor-support=0
[   14.612310] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   14.612436] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   14.612723] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.781895] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 19
[   14.781912] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
[   14.781931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.783364] input: HP WMI hotkeys as /devices/virtual/input/input6
[   14.889666] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[   14.890823] rts_pstor: Initializing Realtek PCIE storage driver...
[   14.890891] rts_pstor 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[   14.890994] rts_pstor 0000:04:00.0: Resource length: 0x1000
[   14.891056] rts_pstor 0000:04:00.0: Original address: 0xc1500000, remapped address: 0xffffc90000638000
[   14.891066] rts_pstor 0000:04:00.0: pci->irq = 18
[   14.891072] rts_pstor 0000:04:00.0: rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[   14.958102] [drm] radeon defaulting to kernel modesetting.
[   14.958110] [drm] radeon kernel modesetting enabled.
[   14.958206] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   14.958224] radeon 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[   14.958706] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x166C).
[   14.958794] [drm] register mmio base: 0xC2600000
[   14.958798] [drm] register mmio size: 131072
[   14.959313] radeon 0000:01:00.0: Invalid ROM contents
[   14.959385] radeon 0000:01:00.0: Invalid ROM contents
[   14.959398] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[   14.959404] radeon 0000:01:00.0: Fatal error during GPU init
[   14.959409] [drm] radeon: finishing device.
[   14.959413] [TTM] Memory type 2 has not been initialized
[   14.960745] radeon: probe of 0000:01:00.0 failed with error -22
[   14.992379] cfg80211: Calling CRDA to update world regulatory domain
[   15.091662] scsi8 : SCSI emulation for PCI-Express Mass Storage devices
[   15.091986] rts_pstor 0000:04:00.0: rts_pstor: waiting for device to settle before scanning
[   15.367704] rt2800pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[   15.370444] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.370813] Registered led device: rt2800pci-phy0::radio
[   15.370852] Registered led device: rt2800pci-phy0::assoc
[   15.370890] Registered led device: rt2800pci-phy0::quality
[   15.786677] systemd-udevd[7389]: renamed network interface wlan0 to wlp2s0
[   15.879288] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   15.879332] r8169 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[   15.879632] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[   15.879984] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc90010f90000, 80:c1:6e:61:66:fa, XID 00a00000 IRQ 44
[   16.069380] systemd-udevd[7387]: renamed network interface eth0 to eno1
[   16.090268] rts_pstor 0000:04:00.0: rts_pstor: device scan complete
[   16.090481] scsi 8:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   16.090875] sd 8:0:0:0: Attached scsi generic sg2 type 0
[   16.091204] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[   16.130228] Error: Driver 'pcspkr' is already registered, aborting...
[   16.167304] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[   16.167460] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   16.326330] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   16.346979] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.347192] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.347383] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.489828] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3739 MBytes.
[   16.490243] <6>[fglrx]   vendor: 1002 device: 6760 count: 1
[   16.490814] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[   16.490842] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[   16.491071] <6>[fglrx] Kernel PAT support is enabled
[   16.491114] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors
[   21.016902] usb 2-1: device not accepting address 2, error -110
[   21.118807] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[   36.638680] usb 2-1: device not accepting address 3, error -110
[   36.740584] usb 2-1: new high-speed USB device number 4 using ehci_hcd
[   47.153121] usb 2-1: device not accepting address 4, error -110
[   47.255038] usb 2-1: new high-speed USB device number 5 using ehci_hcd
[   48.979708] EXT4-fs (sda7): re-mounted. Opts: (null)
[   49.361701] Adding 2081788k swap on /dev/sda8.  Priority:-1 extents:1 across:2081788k
[   49.503253] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   49.540190] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   53.086917] fbcondecor: console 0 using theme 'sabayon'
[   53.233620] fbcondecor: switched decor state to 'on' on console 0
[   53.384521] fbcondecor: console 1 using theme 'sabayon'
[   53.531331] fbcondecor: switched decor state to 'on' on console 1
[   53.682789] fbcondecor: console 2 using theme 'sabayon'
[   53.829485] fbcondecor: switched decor state to 'on' on console 2
[   53.981211] fbcondecor: console 3 using theme 'sabayon'
[   54.127493] fbcondecor: switched decor state to 'on' on console 3
[   54.278426] fbcondecor: console 4 using theme 'sabayon'
[   54.425394] fbcondecor: switched decor state to 'on' on console 4
[   54.577956] fbcondecor: console 5 using theme 'sabayon'
[   54.724207] fbcondecor: switched decor state to 'on' on console 5
[   54.875229] fbcondecor: console 6 using theme 'sabayon'
[   55.022201] fbcondecor: switched decor state to 'on' on console 6
[   55.175030] fbcondecor: console 7 using theme 'sabayon'
[   55.320725] fbcondecor: switched decor state to 'on' on console 7
[   55.471760] fbcondecor: console 8 using theme 'sabayon'
[   55.616735] fbcondecor: switched decor state to 'on' on console 8
[   55.769033] fbcondecor: console 9 using theme 'sabayon'
[   55.915823] fbcondecor: switched decor state to 'on' on console 9
[   56.067854] fbcondecor: console 10 using theme 'sabayon'
[   56.215112] fbcondecor: switched decor state to 'on' on console 10
[   56.366961] fbcondecor: console 11 using theme 'sabayon'
[   56.513057] fbcondecor: switched decor state to 'on' on console 11
[   57.668552] usb 2-1: device not accepting address 5, error -110
[   57.668585] hub 2-0:1.0: unable to enumerate USB device on port 1
[   57.753542] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[   57.839442] usb 1-1.1: New USB device found, idVendor=0781, idProduct=556b
[   57.839459] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   57.839470] usb 1-1.1: Product: Cruzer Edge
[   57.839478] usb 1-1.1: Manufacturer: SanDisk
[   57.839486] usb 1-1.1: SerialNumber: 20052845431913716FF8
[   57.840021] scsi9 : usb-storage 1-1.1:1.0
[   58.842561] scsi 9:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.20 PQ: 0 ANSI: 5
[   58.908793] sd 9:0:0:0: Attached scsi generic sg3 type 0
[   58.909514] sd 9:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[   58.911396] sd 9:0:0:0: [sdc] Write Protect is off
[   58.911411] sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00
[   58.912272] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   58.917436]  sdc: sdc1
[   58.920130] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[   60.099672] fbcondecor: switched decor state to 'off' on console 6
[   60.319572] fbcondecor: console 6 using theme 'sabayon'
[   60.323737] fbcondecor: switched decor state to 'on' on console 6
[   63.331494] 8021q: 802.1Q VLAN Support v1.8
[   64.099434] r8169 0000:03:00.0 eno1: link down
[   66.963011] NET: Registered protocol family 10
[   66.963639] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   66.964449] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   67.091354] wlp2s0: authenticate with 00:19:e0:f9:3f:50
[   67.098914] wlp2s0: send auth to 00:19:e0:f9:3f:50 (try 1/3)
[   67.100390] wlp2s0: authenticated
[   67.100645] rt2800pci 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP
[   67.100660] rt2800pci 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP
[   67.101221] wlp2s0: associate with 00:19:e0:f9:3f:50 (try 1/3)
[   67.103093] wlp2s0: RX AssocResp from 00:19:e0:f9:3f:50 (capab=0x421 status=0 aid=1)
[   67.103724] wlp2s0: associated
[   67.103748] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   70.273189] ata1.00: failed to get Identify Device Data, Emask 0x1
[   70.439715] ata1.00: failed to get Identify Device Data, Emask 0x1
[   70.439730] ata1.00: configured for UDMA/100
[   70.441535] ata1: EH complete
[   71.984192] EXT4-fs (sda7): re-mounted. Opts: commit=0
[   71.989021] EXT4-fs (sda5): re-mounted. Opts: commit=0
[   71.990828] EXT4-fs (sda6): re-mounted. Opts: commit=0
[  334.847096] usb 1-1.1: USB disconnect, device number 3
[  346.631413] usb 1-1.1: new low-speed USB device number 4 using ehci_hcd
[  346.721121] usb 1-1.1: New USB device found, idVendor=093a, idProduct=2510
[  346.721129] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  346.721134] usb 1-1.1: Product: USB OPTICAL MOUSE
[  346.721138] usb 1-1.1: Manufacturer: PIXART
[  346.725043] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11
[  346.725313] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0


the following is with the usb grep:

Code: Select all

revbook revolver # dmesg | grep usb
[    2.157186] usbcore: registered new interface driver udl
[    2.194381] usbcore: registered new interface driver usb-storage
[    2.194449] usbcore: registered new interface driver ums-alauda
[    2.194533] usbcore: registered new interface driver ums-cypress
[    2.194602] usbcore: registered new interface driver ums-datafab
[    2.194669] usbcore: registered new interface driver ums-freecom
[    2.194733] usbcore: registered new interface driver ums-isd200
[    2.194798] usbcore: registered new interface driver ums-jumpshot
[    2.194867] usbcore: registered new interface driver ums-karma
[    2.194935] usbcore: registered new interface driver ums-onetouch
[    2.194997] usbcore: registered new interface driver ums-sddr09
[    2.195065] usbcore: registered new interface driver ums-sddr55
[    2.195131] usbcore: registered new interface driver ums-usbat
[    2.211412] usbcore: registered new interface driver usbhid
[    2.211416] usbhid: USB HID core driver
[    4.977499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.977505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.977511] usb usb1: Product: EHCI Host Controller
[    4.977517] usb usb1: Manufacturer: Linux 3.7.0-sabayon ehci_hcd
[    4.977522] usb usb1: SerialNumber: 0000:00:1a.0
[    4.988537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.988545] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.988551] usb usb2: Product: EHCI Host Controller
[    4.988556] usb usb2: Manufacturer: Linux 3.7.0-sabayon ehci_hcd
[    4.988561] usb usb2: SerialNumber: 0000:00:1d.0
[    5.279147] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    5.393411] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    5.393422] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.496904] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[   21.016902] usb 2-1: device not accepting address 2, error -110
[   21.118807] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[   36.638680] usb 2-1: device not accepting address 3, error -110
[   36.740584] usb 2-1: new high-speed USB device number 4 using ehci_hcd
[   47.153121] usb 2-1: device not accepting address 4, error -110
[   47.255038] usb 2-1: new high-speed USB device number 5 using ehci_hcd
[   57.668552] usb 2-1: device not accepting address 5, error -110
[   57.753542] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[   57.839442] usb 1-1.1: New USB device found, idVendor=0781, idProduct=556b
[   57.839459] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   57.839470] usb 1-1.1: Product: Cruzer Edge
[   57.839478] usb 1-1.1: Manufacturer: SanDisk
[   57.839486] usb 1-1.1: SerialNumber: 20052845431913716FF8
[   57.840021] scsi9 : usb-storage 1-1.1:1.0
[  334.847096] usb 1-1.1: USB disconnect, device number 3
[  346.631413] usb 1-1.1: new low-speed USB device number 4 using ehci_hcd
[  346.721121] usb 1-1.1: New USB device found, idVendor=093a, idProduct=2510
[  346.721129] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  346.721134] usb 1-1.1: Product: USB OPTICAL MOUSE
[  346.721138] usb 1-1.1: Manufacturer: PIXART
[  346.725043] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11
[  346.725313] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0


as i see there is a problem here:

Code: Select all

[   36.638680] usb 2-1: device not accepting address 3, error -110
[   36.740584] usb 2-1: new high-speed USB device number 4 using ehci_hcd

i have pci=noacpi option set in the boot command line.