ATi Radeon 9600XT

[scorpioxyz]

Well, SL 3.3 Open GL works for livedvd/cd. For 3.4a, Open GL doesn't/fails at boot to livedvd/cd, ATi Catalyst shows up but it uses/indicates Mesa not fglrx. Any tricks ? What's even stranger, Beryl works under Mesa, that is with Ubuntu 7.04.

[Dark_MaGe]

post a

Code: Select all

cat /proc/mtrr

a

Code: Select all

dmesg

and finally post your /var/log/Xorg.93.log

[scorpioxyz]

sabayonuser@sabayonx86 ~ $ cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1
reg01: base=0x40000000 (1024MB), size= 512MB: write-back, count=1
reg02: base=0xa0000000 (2560MB), size= 256MB: write-combining, count=1
reg03: base=0xb0000000 (2816MB), size= 128MB: write-combining, count=2

[scorpioxyz]

sabayonuser@sabayonx86 ~ $ dmesg
nk [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 37.154691] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 37.154871] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 37.155048] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 37.155224] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 37.155404] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 37.155579] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 37.155755] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 37.155938] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 37.156115] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 37.156293] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 37.156470] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 37.156646] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 37.156824] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 37.156974] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 37.157109] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 37.157244] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 37.157378] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 37.157512] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 37.157705] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 37.157900] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 37.158092] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 37.158282] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 37.158476] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 37.158666] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 37.158805] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 37.158996] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 37.159187] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 37.159377] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 37.159567] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 37.159676] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 37.159688] pnp: PnP ACPI init
[ 37.159696] Device driver pnp0 lacks bus and class support for being resumed.
[ 37.159699] ACPI: bus type pnp registered
[ 37.164342] pnp: PnP ACPI: found 14 devices
[ 37.164344] ACPI: ACPI bus type pnp unregistered
[ 37.164464] SCSI subsystem initialized
[ 37.164491] libata version 2.21 loaded.
[ 37.164577] usbcore: registered new interface driver usbfs
[ 37.164580] USB driver usbfs lacks resume support.
[ 37.164616] usbcore: registered new interface driver hub
[ 37.164655] usbcore: registered new device driver usb
[ 37.164693] PCI: Using ACPI for IRQ routing
[ 37.164698] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 37.196803] NetLabel: Initializing
[ 37.196805] NetLabel: domain hash size = 128
[ 37.196807] NetLabel: protocols = UNLABELED CIPSOv4
[ 37.196819] NetLabel: unlabeled traffic allowed by default
[ 37.197106] ACPI: RTC can wake from S4
[ 37.197138] pnp: 00:00: ioport range 0x4000-0x407f has been reserved
[ 37.197142] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 37.197145] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 37.197148] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
[ 37.197151] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 37.197153] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 37.197159] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 37.197162] pnp: 00:01: ioport range 0x5040-0x507f has been reserved
[ 37.197167] pnp: 00:02: iomem range 0xd1800-0xd3fff has been reserved
[ 37.197170] pnp: 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[ 37.197173] pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[ 37.197176] pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved
[ 37.197742] Time: tsc clocksource has been installed.
[ 37.227297] PCI: Bridge: 0000:00:08.0
[ 37.227299] IO window: disabled.
[ 37.227303] MEM window: disabled.
[ 37.227307] PREFETCH window: d2000000-d2ffffff
[ 37.227314] PCI: Bridge: 0000:00:1e.0
[ 37.227317] IO window: c000-cfff
[ 37.227321] MEM window: d0000000-d1ffffff
[ 37.227324] PREFETCH window: b0000000-cfffffff
[ 37.227334] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 37.227352] NET: Registered protocol family 2
[ 37.236751] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 37.236904] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 37.238370] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 37.238851] TCP: Hash tables configured (established 131072 bind 65536)
[ 37.238854] TCP reno registered
[ 37.241837] checking if image is initramfs... it is
[ 37.474671] audit: initializing netlink socket (disabled)
[ 37.474684] audit(1185614169.488:1): initialized
[ 37.474748] highmem bounce pool size: 64 pages
[ 37.474752] Total HugeTLB memory allocated, 0
[ 37.474801] VFS: Disk quotas dquot_6.5.1
[ 37.474812] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 37.474879] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 37.474882] Registering unionfs 20060916-2203
[ 37.474884] unionfs: debugging is not enabled
[ 37.474905] Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu
[ 37.475156] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 37.475361] NTFS driver 2.1.28 [Flags: R/W].
[ 37.475390] QNX4 filesystem 0.2.3 registered.
[ 37.475393] fuse init (API version 7.
[ 37.475472] JFS: nTxBlock = 8192, nTxLock = 65536
[ 37.479707] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 37.479828] SGI XFS Quota Management subsystem
[ 37.479862] SELinux: Registering netfilter hooks
[ 37.479978] io scheduler noop registered
[ 37.479981] io scheduler anticipatory registered
[ 37.479983] io scheduler deadline registered
[ 37.479993] io scheduler cfq registered (default)
[ 37.480032] Boot video device is 0000:02:00.0
[ 37.509331] lp: driver loaded but no devices found
[ 37.509411] Real Time Clock Driver v1.12ac
[ 37.513029] ppdev: user-space parallel port driver
[ 37.513034] Linux agpgart interface v0.102 (c) Dave Jones
[ 37.513183] vesafb: framebuffer at 0xb0000000, mapped to 0xf8d00000, using 3072k, total 262144k
[ 37.513187] vesafb: mode is 1024x768x16, linelength=2048, pages=169
[ 37.513189] vesafb: protected mode interface info at c000:5737
[ 37.513192] vesafb: pmi: set display start = c00c57cb, set palette = c00c5817
[ 37.513194] vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
[ 37.513201] vesafb: scrolling: redraw
[ 37.513203] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 37.541445] Console: switching to colour frame buffer device 128x48
[ 37.568660] fbsplash: console 0 using theme 'sabayon'
[ 37.710413] fbsplash: switched splash state to 'on' on console 0
[ 37.710728] fb0: VESA VGA frame buffer device
[ 37.710944] input: Power Button (FF) as /class/input/input0
[ 37.710950] ACPI: Power Button (FF) [PWRF]
[ 37.711021] input: Power Button (CM) as /class/input/input1
[ 37.711025] ACPI: Power Button (CM) [PWRB]
[ 37.711087] ACPI: Fan [FAN] (on)
[ 37.715474] ACPI: Thermal Zone [THRM] (40 C)
[ 37.715548] ibm_acpi: ec object not found
[ 37.715554] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 37.716256] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.716483] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 37.716706] parport_pc 00:0c: reported by Plug and Play ACPI
[ 37.716759] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 37.798185] lp0: using parport0 (interrupt-driven).
[ 37.798188] lp0: console ready
[ 37.798327] PCI driver parport_pc lacks driver specific resume support.
[ 37.798366] Floppy drive(s): fd0 is 1.44M
[ 37.813819] FDC 0 is a post-1991 82077
[ 37.815284] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[ 37.817552] loop: module loaded
[ 37.817555] Compaq SMART2 Driver (v 2.6.0)
[ 37.817606] PCI driver cpqarray lacks driver specific resume support.
[ 37.817609] HP CISS Driver (v 3.6.14)
[ 37.817645] PCI driver cciss lacks driver specific resume support.
[ 37.817676] PCI driver DAC960 lacks driver specific resume support.
[ 37.817786] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 37.817827] PCI driver umem lacks driver specific resume support.
[ 37.817831] MM: desc_per_page = 128
[ 37.817885] Device driver lo lacks bus and class support for being resumed.
[ 37.817945] PCI driver hp100 lacks driver specific resume support.
[ 37.818014] input: Macintosh mouse button emulation as /class/input/input2
[ 37.818043] Loading iSCSI transport class v2.0-724.
[ 37.818155] iscsi: registered transport (tcp)
[ 37.818248] PCI driver arcmsr lacks driver specific resume support.
[ 37.818299] PCI driver aic7xxx lacks driver specific resume support.
[ 37.818355] PCI driver aic79xx lacks driver specific resume support.
[ 37.818358] Adaptec aacraid driver (1.1-5[2437]-mh4)
[ 37.818398] PCI driver aacraid lacks driver specific resume support.
[ 37.818603] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 37.818657] PCI driver aic94xx lacks driver specific resume support.
[ 37.818696] PCI driver ips lacks driver specific resume support.
[ 37.818758] PCI driver qla1280 lacks driver specific resume support.
[ 37.818771] QLogic Fibre Channel HBA Driver
[ 37.818811] PCI driver qla2xxx lacks driver specific resume support.
[ 37.818851] iscsi: registered transport (qla4xxx)
[ 37.818887] PCI driver qla4xxx lacks driver specific resume support.
[ 37.818889] QLogic iSCSI HBA Driver
[ 37.818891] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[ 37.818893] Copyright(c) 2004-2007 Emulex. All rights reserved.
[ 37.818933] PCI driver lpfc lacks driver specific resume support.
[ 37.818965] PCI driver dmx3191d lacks driver specific resume support.
[ 37.819005] PCI driver sym53c8xx lacks driver specific resume support.
[ 37.819048] PCI driver dc395x lacks driver specific resume support.
[ 37.819051] DC390: clustering now enabled by default. If you get problems load
[ 37.819053] with "disable_clustering=1" and report to maintainers
[ 37.819088] PCI driver tmscsim lacks driver specific resume support.
[ 37.819242] PCI driver megaraid_legacy lacks driver specific resume support.
[ 37.819246] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 37.819249] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 37.819284] PCI driver megaraid lacks driver specific resume support.
[ 37.819287] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 37.819321] PCI driver megaraid_sas lacks driver specific resume support.
[ 37.819354] PCI driver atp870u lacks driver specific resume support.
[ 37.819357] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 37.819409] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 37.819441] PCI driver inia100 lacks driver specific resume support.
[ 37.819444] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 37.819474] PCI driver 3w-xxxx lacks driver specific resume support.
[ 37.819476] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 37.819506] PCI driver 3w-9xxx lacks driver specific resume support.
[ 37.819509] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 37.819549] PCI driver ipr lacks driver specific resume support.
[ 37.819551] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 37.819580] PCI driver hptiop lacks driver specific resume support.
[ 37.819583] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 37.819614] PCI driver stex lacks driver specific resume support.
[ 37.819617] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 37.819653] osst :I: Tape driver with OnStream support version 0.99.4
[ 37.819655] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 37.819826] PCI driver sata_svw lacks driver specific resume support.
[ 37.819892] PCI driver sata_promise lacks driver specific resume support.
[ 37.819923] PCI driver sata_qstor lacks driver specific resume support.
[ 37.820051] PCI driver sata_vsc lacks driver specific resume support.
[ 37.820083] PCI driver sata_sis lacks driver specific resume support.
[ 37.820119] PCI driver sata_sx4 lacks driver specific resume support.
[ 37.820192] PCI driver sata_uli lacks driver specific resume support.
[ 37.820231] PCI driver sata_mv lacks driver specific resume support.
[ 37.820293] PCI driver pdc_adma lacks driver specific resume support.
[ 37.820359] pata_amd 0000:00:09.0: version 0.3.8
[ 37.820412] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 37.820474] scsi0 : pata_amd
[ 37.820485] Device driver host0 lacks bus and class support for being resumed.
[ 37.820544] scsi1 : pata_amd
[ 37.820557] Device driver host1 lacks bus and class support for being resumed.
[ 37.820597] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 37.820601] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 37.978734] ata1.00: ATA-7: Maxtor 6B160P0, BAH41E00, max UDMA/133
[ 37.978737] ata1.00: 320173056 sectors, multi 16: LBA48
[ 37.979800] ata1.01: ATA-5: MDT MD1200AB-00CBA1, 04.07B04, max UDMA/100
[ 37.979803] ata1.01: 234441648 sectors, multi 16: LBA
[ 37.987703] ata1.00: configured for UDMA/133
[ 37.994201] ata1.01: configured for UDMA/100
[ 38.452725] ata2.00: ATAPI: CD-ROM 50X, 50, max UDMA/33, CDB intr
[ 38.452729] ata2.01: ATAPI: GENERIC DVD RW 16XMax, 230I, max UDMA/66
[ 38.452734] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 38.609538] ata2.00: configured for UDMA/33
[ 38.766355] ata2.01: configured for UDMA/33
[ 38.766369] Device driver target0:0:0 lacks bus and class support for being resumed.
[ 38.766447] scsi 0:0:0:0: Direct-Access ATA Maxtor 6B160P0 BAH4 PQ: 0 ANSI: 5
[ 38.766548] sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 38.766561] sd 0:0:0:0: [sda] Write Protect is off
[ 38.766564] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.766580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.766642] sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 38.766652] sd 0:0:0:0: [sda] Write Protect is off
[ 38.766655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.766670] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.766673] sda: sda1 sda2 < sda5 >
[ 38.799924] sd 0:0:0:0: [sda] Attached SCSI disk
[ 38.799987] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 38.800008] Device driver target0:0:1 lacks bus and class support for being resumed.
[ 38.800047] scsi 0:0:1:0: Direct-Access ATA MDT MD1200AB-00C 04.0 PQ: 0 ANSI: 5
[ 38.800145] sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 38.800155] sd 0:0:1:0: [sdb] Write Protect is off
[ 38.800158] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 38.800173] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.800206] sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 38.800216] sd 0:0:1:0: [sdb] Write Protect is off
[ 38.800218] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 38.800233] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.800236] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[ 38.842891] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 38.842952] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 38.842974] Device driver target1:0:0 lacks bus and class support for being resumed.
[ 38.843255] scsi 1:0:0:0: CD-ROM E-IDE CD-ROM 50X 50 PQ: 0 ANSI: 5
[ 38.846721] sr0: scsi3-mmc drive: 4x/50x cd/rw xa/form2 cdda tray
[ 38.846724] Uniform CD-ROM driver Revision: 3.20
[ 38.846774] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 38.846833] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 38.846854] Device driver target1:0:1 lacks bus and class support for being resumed.
[ 38.848164] scsi 1:0:1:0: CD-ROM GENERIC DVD RW 16XMax 230I PQ: 0 ANSI: 5
[ 38.849146] sr1: scsi3-mmc drive: 86x/86x writer cd/rw xa/form2 cdda tray
[ 38.849198] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 38.849258] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 38.849330] PCI driver pata_artop lacks driver specific resume support.
[ 38.849607] PCI driver pata_hpt37x lacks driver specific resume support.
[ 38.849641] PCI driver pata_hpt3x2n lacks driver specific resume support.
[ 38.850034] PCI driver pata_pdc2027x lacks driver specific resume support.
[ 38.850300] PCI driver pata_sl82c105 lacks driver specific resume support.
[ 38.850405] I2O subsystem v1.325
[ 38.850407] i2o: max drivers = 8
[ 38.850504] PCI driver PCI_I2O lacks driver specific resume support.
[ 38.850507] I2O Configuration OSM v1.323
[ 38.850568] I2O Bus Adapter OSM v1.317
[ 38.850595] I2O Block Device OSM v1.325
[ 38.850669] I2O SCSI Peripheral OSM v1.316
[ 38.850698] I2O ProcFS OSM v1.316
[ 38.850727] Fusion MPT base driver 3.04.04
[ 38.850728] Copyright (c) 1999-2007 LSI Logic Corporation
[ 38.850733] Fusion MPT SPI Host driver 3.04.04
[ 38.850774] Fusion MPT FC Host driver 3.04.04
[ 38.850817] Fusion MPT SAS Host driver 3.04.04
[ 38.850866] Fusion MPT misc device (ioctl) driver 3.04.04
[ 38.850898] mptctl: Registered with Fusion MPT base driver
[ 38.850901] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 38.850903] Fusion MPT LAN driver 3.04.04
[ 38.850980] usbcore: registered new interface driver usblp
[ 38.850983] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 38.850985] Initializing USB Mass Storage driver...
[ 38.851022] usbcore: registered new interface driver usb-storage
[ 38.851024] USB Mass Storage support registered.
[ 38.851064] usbcore: registered new interface driver libusual
[ 38.851066] USB driver libusual lacks resume support.
[ 38.851143] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 38.851146] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 39.102117] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 39.102124] parport0: cannot grant exclusive access for device parkbd
[ 39.102217] PCI driver pcips2 lacks driver specific resume support.
[ 39.102310] mice: PS/2 mouse device common for all mice
[ 39.125163] input: AT Translated Set 2 keyboard as /class/input/input3
[ 39.125385] md: linear personality registered for level -1
[ 39.125388] md: raid0 personality registered for level 0
[ 39.125390] md: raid1 personality registered for level 1
[ 39.125392] md: raid10 personality registered for level 10
[ 39.141784] raid6: int32x1 796 MB/s
[ 39.158787] raid6: int32x2 925 MB/s
[ 39.175711] raid6: int32x4 890 MB/s
[ 39.192698] raid6: int32x8 597 MB/s
[ 39.209691] raid6: mmxx1 1839 MB/s
[ 39.226660] raid6: mmxx2 3242 MB/s
[ 39.243657] raid6: sse1x1 1679 MB/s
[ 39.260623] raid6: sse1x2 2820 MB/s
[ 39.260625] raid6: using algorithm sse1x2 (2820 MB/s)
[ 39.260627] md: raid6 personality registered for level 6
[ 39.260629] md: raid5 personality registered for level 5
[ 39.260632] md: raid4 personality registered for level 4
[ 39.260634] raid5: automatically using best checksumming function: pIII_sse
[ 39.265610] pIII_sse : 2328.000 MB/sec
[ 39.265613] raid5: using function: pIII_sse (2328.000 MB/sec)
[ 39.265615] md: multipath personality registered for level -4
[ 39.265618] md: faulty personality registered for level -5
[ 39.265686] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 39.265798] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 39.265835] usbcore: registered new interface driver hiddev
[ 39.265837] USB driver hiddev lacks resume support.
[ 39.265867] usbcore: registered new interface driver usbhid
[ 39.265869] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 39.265900] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 39.265943] ALSA device list:
[ 39.265945] No soundcards found.
[ 39.266006] TCP bic registered
[ 39.266013] NET: Registered protocol family 1
[ 39.266016] NET: Registered protocol family 17
[ 39.266075] powernow-k8: Processor cpuid 6a0 not supported
[ 39.266091] Using IPI No-Shortcut mode
[ 39.266093] Suspend v2.2.10
[ 39.266142] Suspend2 Checksumming support registered.
[ 39.266170] Suspend2 Userspace Storage Manager support registered.
[ 39.266200] Suspend2 Basic User Interface support registered.
[ 39.266228] Suspend2 Compressor support registered.
[ 39.266254] Suspend2 Block I/O support registered.
[ 39.266281] Suspend2 Swap Allocator support registered.
[ 39.266308] Suspend2 File Allocator support registered.
[ 39.266313] Suspend2 Userspace UI support registered.
[ 39.266442] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 39.359567] ata1: soft resetting port
[ 39.526101] ata1.00: configured for UDMA/133
[ 39.532626] ata1.01: configured for UDMA/100
[ 39.532629] ata1: EH complete
[ 39.532662] sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 39.532674] sd 0:0:0:0: [sda] Write Protect is off
[ 39.532677] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.532692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.532709] sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 39.532717] sd 0:0:1:0: [sdb] Write Protect is off
[ 39.532720] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 39.532733] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.532748] sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 39.532756] sd 0:0:0:0: [sda] Write Protect is off
[ 39.532758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.532772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.532786] sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 39.532795] sd 0:0:1:0: [sdb] Write Protect is off
[ 39.532797] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 39.532810] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.672384] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 39.672392] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16
[ 39.672404] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 39.672407] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 39.672484] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 39.672518] ehci_hcd 0000:00:02.2: debug port 1
[ 39.672523] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 39.672533] ehci_hcd 0000:00:02.2: irq 16, io mem 0xd3005000
[ 39.672541] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 39.672677] Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
[ 39.672685] usb usb1: configuration #1 chosen from 1 choice
[ 39.672730] hub 1-0:1.0: USB hub found
[ 39.672739] hub 1-0:1.0: 6 ports detected
[ 39.773128] Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
[ 39.798267] USB Universal Host Controller Interface driver v3.0
[ 39.866168] sl811: driver sl811-hcd, 19 May 2005
[ 39.962603] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[ 39.962606] Copyright (c) 1999-2006 Intel Corporation.
[ 41.236461] No storage allocator is currently active. Rechecking whether we can use one.
[ 41.236466] Suspend2: Resume2 parameter is empty. Suspending will be disabled.
[ 41.236471] Compression Driver: Argh! Nothing follows me in the pipeline!
[ 41.236473] Compressor didn't initialise okay.
[ 41.236475] Suspend2: Initialise modules failed!
[ 42.074885] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 42.079115] Unable to load NLS charset iso8859-1
[ 42.083239] Unable to load NLS charset iso8859-1
[ 42.327048] ISO 9660 Extensions: RRIP_1991A
[ 61.525665] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 61.525692] rtc_cmos: probe of 00:06 failed with error -16
[ 61.559994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 61.564883] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 61.566403] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 61.566411] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 17
[ 61.566418] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 61.670876] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 62.078686] Device driver eth0 lacks bus and class support for being resumed.
[ 62.078712] eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0
[ 62.079077] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 62.079085] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 18
[ 62.079100] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 62.079103] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 62.079452] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 62.079471] ohci_hcd 0000:00:02.0: irq 18, io mem 0xd3003000
[ 62.132697] Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
[ 62.132710] usb usb2: configuration #1 chosen from 1 choice
[ 62.132969] hub 2-0:1.0: USB hub found
[ 62.132985] hub 2-0:1.0: 3 ports detected
[ 62.233292] Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
[ 62.233922] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[ 62.233926] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 16
[ 62.233941] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 62.233945] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 62.234285] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 62.234300] ohci_hcd 0000:00:02.1: irq 16, io mem 0xd3004000
[ 62.287571] Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
[ 62.287583] usb usb3: configuration #1 chosen from 1 choice
[ 62.287853] hub 3-0:1.0: USB hub found
[ 62.287867] hub 3-0:1.0: 3 ports detected
[ 62.388134] Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
[ 62.389482] Device driver i2c-0 lacks bus and class support for being resumed.
[ 62.389487] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 62.389773] Device driver i2c-1 lacks bus and class support for being resumed.
[ 62.389777] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 62.389798] PCI driver nForce2_smbus lacks driver specific resume support.
[ 62.393566] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 62.393571] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
[ 62.393591] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 62.648592] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 62.721510] intel8x0_measure_ac97_clock: measured 50223 usecs
[ 62.721514] intel8x0: clocking to 47423
[ 62.722132] PCI driver shpchp lacks driver specific resume support.
[ 62.722136] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 62.841675] Device driver usbdev3.2_ep00 lacks bus and class support for being resumed.
[ 62.841685] usb 3-3: configuration #1 chosen from 1 choice
[ 62.853823] input: Logitech USB Mouse as /class/input/input4
[ 62.853875] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.1-3
[ 62.853917] Device driver usbdev3.2_ep81 lacks bus and class support for being resumed.
[ 64.254475] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 64.254483] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 64.254499] PCI: Unable to reserve mem region #1:10000000@b0000000 for device 0000:02:00.0
[ 64.254501] radeonfb (0000:02:00.0): cannot request region 0.
[ 64.254507] radeonfb: probe of 0000:02:00.0 failed with error -16
[ 72.348601] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 72.348605] vboxdrv: Successfully done.
[ 121.307909] NET: Registered protocol family 10
[ 121.308206] lo: Disabled Privacy Extensions
[ 121.308323] Mobile IPv6
[ 123.340443] VFS: Can't find ext4 filesystem on dev loop1.
[ 193.754153] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 193.757243] [fglrx] Maximum main memory to use for locked dma buffers: 1406 MBytes.
[ 193.757389] [fglrx] module loaded - fglrx 8.38.6 [Jun 22 2007] on minor 0
[ 198.825226] fbsplash: console 1 using theme 'sabayon'
[ 198.831736] fbsplash: switched splash state to 'on' on console 1
[ 198.850020] fbsplash: console 2 using theme 'sabayon'
[ 198.856652] fbsplash: switched splash state to 'on' on console 2
[ 198.889882] fbsplash: console 3 using theme 'sabayon'
[ 198.896100] fbsplash: switched splash state to 'on' on console 3
[ 198.918939] fbsplash: console 4 using theme 'sabayon'
[ 198.925748] fbsplash: switched splash state to 'on' on console 4
[ 198.948400] fbsplash: console 5 using theme 'sabayon'
[ 198.954633] fbsplash: switched splash state to 'on' on console 5
[ 198.964941] fbsplash: console 11 using theme 'sabayon'
[ 198.971352] fbsplash: switched splash state to 'on' on console 11
[ 206.968083] [fglrx] Internal AGP is not supported in 2.6 kernel.
[ 206.968324] [fglrx:firegl_unlock] *ERROR* Process 11933 using kernel context 0
[ 211.507642] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 212.507713] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 227.469112] eth0: no IPv6 routers present
[ 234.678851] [fglrx] Internal AGP is not supported in 2.6 kernel.
[ 234.679082] [fglrx:firegl_unlock] *ERROR* Process 14133 using kernel context 0
[ 242.319264] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 243.319139] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 284.829327] kjournald starting. Commit interval 5 seconds
[ 284.829634] EXT3 FS on sdb3, internal journal
[ 284.829702] EXT3-fs: mounted filesystem with ordered data mode.
[ 285.289516] kjournald starting. Commit interval 5 seconds
[ 285.289861] EXT3 FS on sdb6, internal journal
[ 285.289931] EXT3-fs: mounted filesystem with ordered data mode.

[scorpioxyz]

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux sabayonx86 2.6.22-sabayon #1 SMP Sat Jul 21 11:00:08 UTC 2007 i686
Build Date: 12 June 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 28 09:19:26 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Main Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "VESA"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Mouse2"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/TTF/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/corefonts
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x8194640
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1462,5700 rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1462,5700 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1462,5700 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1462,5700 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1462,5700 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1462,570c rev a1 class 02,00,00 hdr 00
(II) PCI: 00:06:0: chip 10de,006a card 1462,5700 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card f462,5700 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:08:0: chip 1057,5600 card 1436,0300 rev 00 class 07,80,00 hdr 00
(II) PCI: 02:00:0: chip 1002,4152 card 1002,7c20 rev 00 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,4172 card 1002,7c21 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd2000000 - 0xd2ffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd1ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[B]
(--) PCI:*(2:0:0) ATI Technologies Inc RV350 AR [Radeon 9600] rev 0, Mem @ 0xb0000000/28, 0xd1000000/16, I/O @ 0xc000/8
(--) PCI: (2:0:1) ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) rev 0, Mem @ 0xc0000000/28, 0xd1010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xa0000000 from 0xafffffff to 0x9fffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd20000ff (0x100) MX[B]
[1] -1 0 0xd3001000 - 0xd3001fff (0x1000) MX[B]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[B]
[3] -1 0 0xd3005000 - 0xd30050ff (0x100) MX[B]
[4] -1 0 0xd3004000 - 0xd3004fff (0x1000) MX[B]
[5] -1 0 0xd3003000 - 0xd3003fff (0x1000) MX[B]
[6] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[7] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[B](B)
[8] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[10] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[12] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[14] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[B](B)
[1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd20000ff (0x100) MX[B]
[1] -1 0 0xd3001000 - 0xd3001fff (0x1000) MX[B]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[B]
[3] -1 0 0xd3005000 - 0xd30050ff (0x100) MX[B]
[4] -1 0 0xd3004000 - 0xd3004fff (0x1000) MX[B]
[5] -1 0 0xd3003000 - 0xd3003fff (0x1000) MX[B]
[6] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[7] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[B](B)
[8] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[10] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[12] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[14] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[B](B)
[1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd2000000 - 0xd20000ff (0x100) MX[B]
[5] -1 0 0xd3001000 - 0xd3001fff (0x1000) MX[B]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[B]
[7] -1 0 0xd3005000 - 0xd30050ff (0x100) MX[B]
[8] -1 0 0xd3004000 - 0xd3004fff (0x1000) MX[B]
[9] -1 0 0xd3003000 - 0xd3003fff (0x1000) MX[B]
[10] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[11] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[B](B)
[12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[13] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[20] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B]
[21] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "i2c"(II) Module already built-in
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "ddc"(II) Module already built-in
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.99.903, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.99.903, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) Primary Device is: PCI 02:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4152) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd2000000 - 0xd20000ff (0x100) MX[B]
[5] -1 0 0xd3001000 - 0xd3001fff (0x1000) MX[B]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[B]
[7] -1 0 0xd3005000 - 0xd30050ff (0x100) MX[B]
[8] -1 0 0xd3004000 - 0xd3004fff (0x1000) MX[B]
[9] -1 0 0xd3003000 - 0xd3003fff (0x1000) MX[B]
[10] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[11] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[B](B)
[12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[13] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[20] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B]
[21] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81b1658
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd2000000 - 0xd20000ff (0x100) MX[B]
[5] -1 0 0xd3001000 - 0xd3001fff (0x1000) MX[B]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[B]
[7] -1 0 0xd3005000 - 0xd30050ff (0x100) MX[B]
[8] -1 0 0xd3004000 - 0xd3004fff (0x1000) MX[B]
[9] -1 0 0xd3003000 - 0xd3003fff (0x1000) MX[B]
[10] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[11] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[B](B)
[12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[13] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[B](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[22] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[23] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B]
[24] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI RADEON 9600 Series" (Chipset = 0x4152)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x7c20)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xd1000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 262144 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9600 PRO
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V350
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: IBM Model: 40fa Serial#: 16843009
(II) fglrx(0): Year: 2002 Week: 15
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 2.76
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600
(II) fglrx(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.297
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 157.5 MHz Image Size: 360 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) fglrx(0): Serial No: 24-HH114
(II) fglrx(0): Monitor name: IBM G97
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 210 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00244dfa4001010101
(II) fglrx(0): 0f0c010368241bb0ea9ea8a154469924
(II) fglrx(0): 0e484cad67003159455961598199a94f
(II) fglrx(0): 010101010101863d00c05100304040a0
(II) fglrx(0): 1300680e1100001e000000ff0032342d
(II) fglrx(0): 48483131340a20202020000000fc0049
(II) fglrx(0): 424d204739370a2020202020000000fd
(II) fglrx(0): 0032a01e6015000a202020202020006a
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 324/189MHz @ 50Hz [enable load balancing]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 33 modes found for primary display.
(--) fglrx(0): Virtual size is 1024x768 (pitch 0)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 113.3 MHz (scaled from 0.0 MHz), 81.4 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1024x768" 113.30 1024 1096 1208 1392 768 769 772 814 +hsync
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.18 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 83.9 MHz (scaled from 0.0 MHz), 77.2 kHz, 120.0 Hz
(II) fglrx(0): Modeline "800x600" 83.94 800 856 944 1088 600 601 604 643 +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 72.8 MHz (scaled from 0.0 MHz), 84.3 kHz, 160.0 Hz
(II) fglrx(0): Modeline "640x480" 72.85 640 680 752 864 480 481 484 527 +hsync
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(++) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 113.3 MHz (scaled from 0.0 MHz), 81.4 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1024x768" 113.30 1024 1096 1208 1392 768 769 772 814 +hsync
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.18 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 83.9 MHz (scaled from 0.0 MHz), 77.2 kHz, 120.0 Hz
(II) fglrx(0): Modeline "800x600" 83.94 800 856 944 1088 600 601 604 643 +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 72.8 MHz (scaled from 0.0 MHz), 84.3 kHz, 160.0 Hz
(II) fglrx(0): Modeline "640x480" 72.85 640 680 752 864 480 481 484 527 +hsync
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd1000000 - 0xd100ffff (0x10000) MX[B]
[1] 0 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xd2000000 - 0xd20000ff (0x100) MX[B]
[7] -1 0 0xd3001000 - 0xd3001fff (0x1000) MX[B]
[8] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[B]
[9] -1 0 0xd3005000 - 0xd30050ff (0x100) MX[B]
[10] -1 0 0xd3004000 - 0xd3004fff (0x1000) MX[B]
[11] -1 0 0xd3003000 - 0xd3003fff (0x1000) MX[B]
[12] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[13] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[B](B)
[14] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[15] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[B](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[20] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[25] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[26] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B]
[27] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[28] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x5000
(II) fglrx(0): [drm] mapped SAREA 0x5000 to 0xb72e2000
(II) fglrx(0): [drm] framebuffer handle = 0x6000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.38.6
(II) fglrx(0): Date: Jun 22 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.22-sabayon
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00007000
(II) fglrx(0): Interrupt handler installed at IRQ 19.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): [pci] find AGP GART
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x5000 at 0xb72e2000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1024 x 7423
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000304
fbarea0->box.x2 0x00000400, fbarea0->box.y2 0x00000306
icon[0].start=0x304000
fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000306
fbarea1->box.x2 0x00000400, fbarea1->box.y2 0x00000308
icon[1].start=0x306000
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "Protocol" "ImPS/2"
(**) Mouse2: Device: "/dev/input/mice"
(**) Mouse2: Protocol: "ImPS/2"
(**) Option "SendCoreEvents"
(**) Mouse2: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse2: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse2: ZAxisMapping: buttons 4 and 5
(**) Mouse2: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 5"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse2" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) Mouse2: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
ProcXCloseDevice to close or not ?

[Dark_MaGe]

from ati site

(EE) fglrx(0): [agp] unable to acquire AGP, error ""xf86_ENODEV""xf86_ENODEV""

This is not a problem with the display driver.

Version 2.6 kernels require a second kernel module in addition to agpgart, which should be named similar to the manufacturer of your motherboard AGP chipset. This error message should occur if the other agp module is not loaded.

This issue can be worked around as follows:

1. First make sure that agpgart is loading properly.
2. To find out which AGP controller your motherboard uses, issue the following command: lspci | grep AGP
3. To find a list of AGP related kernel modules installed on your machine, issue the following command and look for a module (*.ko file) that suits your AGP Controller: ls /lib/modules/`uname -r`/kernel/drivers/char/agp
4. Use the modprobe command (as root) to load the module. For example: On a motherboard using a VIA® AGP Controller, you would load the via-agp.ko using modprobe as follows (notice that the trailing .ko is omitted): modprobe via-agp

Check the modprobe manpage for more information on loading kernel modules.

5. To verify that the AGP module is already loaded, run lsmod as root. With the X server running and the connection established, the usage count of this module must be greater than zero.

If you cannot find a suitable agp module for your motherboard, then you may want to upgrade to the latest version of the Linux kernel, or check your motherboard manufacturer's website for more information.

try following those and let us know

[scorpioxyz]

Does Sabayon Linux Rev 3.4e fix this openGL issue in the dvd/livecd ? I noticed n the notes it indicates it fixed and allows Compiz Fusion to run with ATi/AMD video cards ? Not that I expect 100 % guarantees, but before I go after 4 GB of dvd download, just thought I'd ask this question regarding an issue I ran into with 3.4a.

[Dark_MaGe]

Does Sabayon Linux Rev 3.4e fix this openGL issue in the dvd/livecd ? I noticed n the notes it indicates it fixed and allows Compiz Fusion to run with ATi/AMD video cards ? Not that I expect 100 % guarantees, but before I go after 4 GB of dvd download, just thought I'd ask this question regarding an issue I ran into with 3.4a.

yes it fixes it, assuming you've your ati card working properly, remember that you need to fix your agp gart following that guide I've posted before

[sylver]

I've got an ati radeon 9600 pro, exactly the same problem, can you tell me if you tried the new 3.4e and it workd?

i think adp gart is native to kernel 2.6 ,so why in the name of God i need to load manualy.And yes, my system is 100% working.I've tested some other distros, it worked fine, but i like sabayon.

[scorpioxyz]

I've got an ati radeon 9600 pro, exactly the same problem, can you tell me if you tried the new 3.4e and it workd?

i think adp gart is native to kernel 2.6 ,so why in the name of God i need to load manualy.And yes, my system is 100% working.I've tested some other distros, it worked fine, but i like sabayon.

No haven't tried 3.4e and being told to fix my video card and load a module manually isn't what I wanted to hear as well, especially since the module didn't exist on the VT version I downloaded. I wanted to hear that when the dvd is inserted and boots up, the screen that indicates opengl is functional says that and graphics acceleration is a selectable option.

I do see that the newer 3.4e is larger than the 3.4a dl. But this might be more to do with a more robust entropy feature ?