Pendrive/USB flash Problem (SOLVED)

[chsims1]

Hi, I'm having a problem with Sabayon reading a pendrive, although it works fine for other USB storage devices such as MP3 players. The output from dmesg after plugging in the device is given below (repeating end of dmesg snipped). I can see that there is a problem, but I can't interpret it Cheers in advance!

Code: Select all

[ 8938.924711] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 8939.054309] Device driver usbdev2.2_ep00 lacks bus and class support for being resumed.
[ 8939.054373] usb 2-1: configuration #1 chosen from 1 choice
[ 8939.057168] scsi8 : SCSI emulation for USB Mass Storage devices
[ 8939.057232] Device driver host8 lacks bus and class support for being resumed.
[ 8939.057720] usb-storage: device found at 2
[ 8939.057723] usb-storage: waiting for device to settle before scanning
[ 8939.057881] Device driver usbdev2.2_ep81 lacks bus and class support for being resumed.
[ 8939.058259] Device driver usbdev2.2_ep02 lacks bus and class support for being resumed.
[ 8939.058405] Device driver usbdev2.2_ep83 lacks bus and class support for being resumed.
[ 8944.151623] usb-storage: device scan complete
[ 8944.151648] Device driver target8:0:0 lacks bus and class support for being resumed.
[ 8944.152117] scsi 8:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
[ 8944.152201] Device driver target8:0:1 lacks bus and class support for being resumed.
[ 8944.152246] Device driver target8:0:2 lacks bus and class support for being resumed.
[ 8944.152285] Device driver target8:0:3 lacks bus and class support for being resumed.
[ 8944.152327] Device driver target8:0:4 lacks bus and class support for being resumed.
[ 8944.152357] Device driver target8:0:5 lacks bus and class support for being resumed.
[ 8944.152386] Device driver target8:0:6 lacks bus and class support for being resumed.
[ 8944.152415] Device driver target8:0:7 lacks bus and class support for being resumed.
[ 8944.421765] SCSI device sdb: 499712 512-byte hdwr sectors (256 MB)
[ 8944.422386] sdb: Write Protect is off
[ 8944.422389] sdb: Mode Sense: 23 00 00 00
[ 8944.422392] sdb: assuming drive cache: write through
[ 8944.424631] SCSI device sdb: 499712 512-byte hdwr sectors (256 MB)
[ 8944.425255] sdb: Write Protect is off
[ 8944.425257] sdb: Mode Sense: 23 00 00 00
[ 8944.425259] sdb: assuming drive cache: write through
[ 8944.425260]  sdb: [CUMANA/ADFS] sdb1 sdb: p1 exceeds device capacity
[ 8944.426078] sd 8:0:0:0: Attached scsi removable disk sdb
[ 8944.426121] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 8944.457570] attempt to access beyond end of device
[ 8944.457575] sdb: rw=0, want=4067027080, limit=499712
[ 8944.457578] Buffer I/O error on device sdb1, logical block 508378384
[ 8944.457581] attempt to access beyond end of device
[ 8944.457584] sdb: rw=0, want=4067027080, limit=499712
[ 8944.457586] Buffer I/O error on device sdb1, logical block 508378384
[ 8944.457597] attempt to access beyond end of device
[ 8944.457600] sdb: rw=0, want=4067027304, limit=499712
[ 8944.457602] Buffer I/O error on device sdb1, logical block 508378412
[ 8944.457605] attempt to access beyond end of device


[Fitzcarraldo]

http://www.sabayonlinux.org/wiki/index. ... _automount

[chsims1]

That worked a treat, thanks very much Fitzcarraldo.