When one of the two receivers for the MX1000's is plugged in, or both, a bluetooth icon pops up in my systray, which is new to me. Also, every so often a notice pops up for BlueDevil (I'm guessing this is related to that bluetooth icon) telling me a MX1000 wants access to the computer, giving me the options to trust-and-authorise, just authorise, or deny.
Clicking trust-and-authorise (using the PMX, obviously) doesn't seem to have any effect.
Here's the output for lsusb and dmesg on the 32-bit machine:
- Code: Select all
Sm0kerZ-ParadiZe ~ # lsusb
Bus 002 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 015: ID 046d:c709 Logitech, Inc. BT Mini-Receiver (HCI mode)
Bus 001 Device 014: ID 046d:c709 Logitech, Inc. BT Mini-Receiver (HCI mode)
Bus 001 Device 013: ID 046d:c70c Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 001 Device 012: ID 046d:c70b Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 001 Device 011: ID 046d:c70c Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 001 Device 010: ID 046d:c70b Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 001 Device 009: ID 046d:0b02 Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 001 Device 008: ID 046d:0b02 Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 001 Device 007: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 005: ID 03f0:2005 Hewlett-Packard ScanJet 3570c
Bus 001 Device 004: ID 03f0:6004 Hewlett-Packard DeskJet 5550
Bus 001 Device 003: ID 1058:1100 Western Digital Technologies, Inc.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Sm0kerZ-ParadiZe ~ #
- Code: Select all
Sm0kerZ-ParadiZe ~ # dmesg
6] pnp 00:04: [irq 8]
[ 0.350559] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
[ 0.350629] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.350663] pnp 00:05: [io 0x0070-0x0073]
[ 0.350733] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.350745] pnp 00:06: [io 0x0061]
[ 0.350814] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.350826] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.350832] pnp 00:07: [irq 13]
[ 0.350904] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.351063] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.351066] pnp 00:08: [io 0x03f7]
[ 0.351073] pnp 00:08: [irq 6]
[ 0.351076] pnp 00:08: [dma 2]
[ 0.351167] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.351368] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.351375] pnp 00:09: [irq 4]
[ 0.351482] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.351705] pnp 00:0a: [io 0x0378-0x037f]
[ 0.351712] pnp 00:0a: [irq 7]
[ 0.351814] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.352608] pnp 00:0b: [mem 0xe0000000-0xe1ffffff]
[ 0.352740] system 00:0b: [mem 0xe0000000-0xe1ffffff] has been reserved
[ 0.352744] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352849] pnp 00:0c: [mem 0x000f0000-0x000f3fff]
[ 0.352852] pnp 00:0c: [mem 0x000f4000-0x000f7fff]
[ 0.352854] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.352857] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.352859] pnp 00:0c: [mem 0xcfef0000-0xcfefffff]
[ 0.352862] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[ 0.352865] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.352867] pnp 00:0c: [mem 0x00100000-0xcfeeffff]
[ 0.352870] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.352872] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.352999] system 00:0c: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.353022] system 00:0c: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.353026] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.353029] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.353032] system 00:0c: [mem 0xcfef0000-0xcfefffff] could not be reserved
[ 0.353036] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.353039] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.353042] system 00:0c: [mem 0x00100000-0xcfeeffff] could not be reserved
[ 0.353046] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.353049] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.353053] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.353062] pnp: PnP ACPI: found 13 devices
[ 0.353064] ACPI: ACPI bus type pnp unregistered
[ 0.353069] PnPBIOS: Disabled by ACPI PNP
[ 0.387724] PCI: max bus depth: 1 pci_try_num: 2
[ 0.387751] pci 0000:00:10.0: BAR 6: assigned [mem 0xcff00000-0xcff1ffff pref]
[ 0.387755] pci 0000:00:0a.0: PCI bridge to [bus 01-01]
[ 0.387757] pci 0000:00:0a.0: bridge window [io disabled]
[ 0.387763] pci 0000:00:0a.0: bridge window [mem 0xe5000000-0xe50fffff]
[ 0.387767] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 0.387772] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.387775] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.387780] pci 0000:00:0b.0: bridge window [mem disabled]
[ 0.387783] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 0.387788] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.387791] pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
[ 0.387796] pci 0000:00:0c.0: bridge window [mem disabled]
[ 0.387799] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 0.387805] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.387808] pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
[ 0.387812] pci 0000:00:0d.0: bridge window [mem disabled]
[ 0.387816] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 0.387827] pci 0000:00:0a.0: setting latency timer to 64
[ 0.387833] pci 0000:00:0b.0: setting latency timer to 64
[ 0.387839] pci 0000:00:0c.0: setting latency timer to 64
[ 0.387846] pci 0000:00:0d.0: setting latency timer to 64
[ 0.387850] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.387853] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.387855] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.387858] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.387861] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.387864] pci_bus 0000:01: resource 1 [mem 0xe5000000-0xe50fffff]
[ 0.387867] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.387870] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.387872] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.387875] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.387878] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.387881] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.387883] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.387886] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 0.387922] NET: Registered protocol family 2
[ 0.387967] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.388128] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.388558] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.388849] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.388852] TCP reno registered
[ 0.388856] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.388868] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.388999] NET: Registered protocol family 1
[ 0.452147] pci 0000:00:10.0: Boot video device
[ 0.452157] PCI: CLS 32 bytes, default 64
[ 0.452225] Trying to unpack rootfs image as initramfs...
[ 0.687221] Freeing initrd memory: 11808k freed
[ 0.697425] audit: initializing netlink socket (disabled)
[ 0.697439] type=2000 audit(1314209194.696:1): initialized
[ 0.704050] highmem bounce pool size: 64 pages
[ 0.704056] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.721129] VFS: Disk quotas dquot_6.5.2
[ 0.721248] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.721352] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.722400] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.722534] QNX4 filesystem 0.2.3 registered.
[ 0.723295] Btrfs loaded
[ 0.723589] aufs 2.1-standalone.tree-3.0-rcN-20110718
[ 0.723595] msgmni has been set to 1700
[ 0.724047] async_tx: api initialized (async)
[ 0.724177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.724207] io scheduler noop registered
[ 0.724210] io scheduler deadline registered (default)
[ 0.724483] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.724522] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.724605] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.724639] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.724716] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.724749] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.725235] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.989165] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.066821] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.069431] toshiba: not a supported Toshiba laptop
[ 1.069599] Linux agpgart interface v0.103
[ 1.069747] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 1.069749] vesafb: scrolling: redraw
[ 1.069752] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.069964] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1536k, total 1536k
[ 1.082246] Console: switching to colour frame buffer device 128x48
[ 1.094503] fb0: VESA VGA frame buffer device
[ 1.094586] intel_idle: MWAIT substates: 0x220
[ 1.094589] intel_idle: does not run on family 6 model 15
[ 1.101037] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.101044] ACPI: Power Button [PWRB]
[ 1.101152] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.101156] ACPI: Power Button [PWRF]
[ 1.101257] ACPI: acpi_idle registered with cpuidle
[ 1.103641] ERST: Table is not found!
[ 1.103657] isapnp: Scanning for PnP cards...
[ 1.200648] fbcondecor: console 0 using theme 'sabayon'
[ 1.265120] fbcondecor: switched decor state to 'on' on console 0
[ 1.415720] isapnp: No Plug & Play device found
[ 1.418141] brd: module loaded
[ 1.419333] loop: module loaded
[ 1.419335] Compaq SMART2 Driver (v 2.6.0)
[ 1.419434] HP CISS Driver (v 3.6.26)
[ 1.419852] MM: desc_per_page = 128
[ 1.420395] Loading iSCSI transport class v2.0-870.
[ 1.420917] fnic: Cisco FCoE HBA Driver, ver 1.5.0.1
[ 1.422605] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 1.422607] Detecting Adaptec I2O RAID controllers...
[ 1.423217] Adaptec aacraid driver 1.1-7[28000]-ms
[ 1.423506] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 1.423644] isci: Intel(R) C600 SAS Controller Driver
[ 1.423810] NCR53c406a: no available ports found
[ 1.423813] sym53c416.c: Version 1.0.0-ac
[ 1.423828] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 1.423895] QLogic Fibre Channel HBA Driver: 8.03.07.03-k
[ 1.424026] iscsi: registered transport (qla4xxx)
[ 1.424078] QLogic iSCSI HBA Driver
[ 1.424080] Emulex LightPulse Fibre Channel SCSI driver 8.3.23
[ 1.424082] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 1.446040] Failed initialization of WD-7000 SCSI card!
[ 1.698088] Refined TSC clocksource calibration: 1999.999 MHz.
[ 1.698093] Switching to clocksource tsc
[ 1.764722] DC390: clustering now enabled by default. If you get problems load
[ 1.764724] with "disable_clustering=1" and report to maintainers
[ 1.764826] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 1.764896] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.764944] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
[ 1.764999] mpt2sas version 08.100.00.02 loaded
[ 1.765147] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 1.765280] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 1.765326] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 1.765373] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 1.765418] nsp32: loading...
[ 1.765461] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
[ 1.765509] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 1.765554] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 1.765669] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 1.765672] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[ 1.765675] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[ 1.765719] iscsi: registered transport (cxgb3i)
[ 1.765721] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[ 1.765763] iscsi: registered transport (cxgb4i)
[ 1.765766] Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010)
[ 1.765809] iscsi: registered transport (bnx2i)
[ 1.765812] VMware PVSCSI driver - version 1.0.1.0-k
[ 1.765859] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 1.765934] osst :I: Tape driver with OnStream support version 0.99.4
[ 1.765935] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 1.766192] ahci 0000:00:0e.0: version 3.0
[ 1.766393] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.766410] ahci 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.766433] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[ 1.766436] ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
[ 1.766495] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.766499] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio
[ 1.766504] ahci 0000:00:0e.0: setting latency timer to 64
[ 1.767579] scsi2 : ahci
[ 1.767764] scsi3 : ahci
[ 1.767887] scsi4 : ahci
[ 1.768019] scsi5 : ahci
[ 1.768225] ata1: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 23
[ 1.768228] ata2: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 23
[ 1.768231] ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 23
[ 1.768234] ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 23
[ 1.769176] pata_amd 0000:00:08.0: version 0.4.1
[ 1.769223] pata_amd 0000:00:08.0: setting latency timer to 64
[ 1.769742] scsi6 : pata_amd
[ 1.769868] scsi7 : pata_amd
[ 1.770483] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.770486] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.773205] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
[ 1.773345] I2O subsystem v1.325
[ 1.773348] i2o: max drivers = 8
[ 1.773485] I2O Configuration OSM v1.323
[ 1.773584] I2O Bus Adapter OSM v1.317
[ 1.773616] I2O Block Device OSM v1.325
[ 1.773768] I2O SCSI Peripheral OSM v1.316
[ 1.773800] I2O ProcFS OSM v1.316
[ 1.773840] Fusion MPT base driver 3.04.19
[ 1.773842] Copyright (c) 1999-2008 LSI Corporation
[ 1.773848] Fusion MPT SPI Host driver 3.04.19
[ 1.773901] Fusion MPT FC Host driver 3.04.19
[ 1.773951] Fusion MPT SAS Host driver 3.04.19
[ 1.774009] Fusion MPT misc device (ioctl) driver 3.04.19
[ 1.774065] mptctl: Registered with Fusion MPT base driver
[ 1.774067] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.774070] Fusion MPT LAN driver 3.04.19
[ 1.774200] Initializing USB Mass Storage driver...
[ 1.774243] usbcore: registered new interface driver usb-storage
[ 1.774245] USB Mass Storage support registered.
[ 1.774286] usbcore: registered new interface driver libusual
[ 1.774324] usbcore: registered new interface driver ums-alauda
[ 1.774359] usbcore: registered new interface driver ums-cypress
[ 1.774397] usbcore: registered new interface driver ums-datafab
[ 1.774433] usbcore: registered new interface driver ums-freecom
[ 1.774473] usbcore: registered new interface driver ums-isd200
[ 1.774509] usbcore: registered new interface driver ums-jumpshot
[ 1.774545] usbcore: registered new interface driver ums-karma
[ 1.774581] usbcore: registered new interface driver ums-onetouch
[ 1.774617] usbcore: registered new interface driver ums-sddr09
[ 1.774655] usbcore: registered new interface driver ums-sddr55
[ 1.774691] usbcore: registered new interface driver ums-usbat
[ 1.774850] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.809241] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.809244] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 2.059117] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.059380] mousedev: PS/2 mouse device common for all mice
[ 2.059883] rtc_cmos 00:05: RTC can wake from S4
[ 2.060048] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.060084] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.060170] md: linear personality registered for level -1
[ 2.060173] md: raid0 personality registered for level 0
[ 2.060175] md: raid1 personality registered for level 1
[ 2.060177] md: raid10 personality registered for level 10
[ 2.060179] md: raid6 personality registered for level 6
[ 2.060182] md: raid5 personality registered for level 5
[ 2.060184] md: raid4 personality registered for level 4
[ 2.060186] md: multipath personality registered for level -4
[ 2.060189] md: faulty personality registered for level -5
[ 2.060392] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.060504] EDAC MC: Ver: 2.1.0
[ 2.060781] EISA: Probing bus 0 at eisa.0
[ 2.060784] EISA: Cannot allocate resource for mainboard
[ 2.060786] Cannot allocate resource for EISA slot 1
[ 2.060789] Cannot allocate resource for EISA slot 2
[ 2.060791] Cannot allocate resource for EISA slot 3
[ 2.060793] Cannot allocate resource for EISA slot 4
[ 2.060795] Cannot allocate resource for EISA slot 5
[ 2.060797] Cannot allocate resource for EISA slot 6
[ 2.060799] Cannot allocate resource for EISA slot 7
[ 2.060801] Cannot allocate resource for EISA slot 8
[ 2.060803] EISA: Detected 0 cards.
[ 2.060810] cpuidle: using governor ladder
[ 2.060812] cpuidle: using governor menu
[ 2.060898] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 2.061977] usbcore: registered new interface driver usbhid
[ 2.061979] usbhid: USB HID core driver
[ 2.062225] TCP bic registered
[ 2.062228] NET: Registered protocol family 17
[ 2.062273] Registering the dns_resolver key type
[ 2.062292] Using IPI No-Shortcut mode
[ 2.073035] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.073062] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.073080] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.073094] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.073538] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB02, max UDMA/100
[ 2.074262] ata1.00: configured for UDMA/100
[ 2.075156] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB02 PQ: 0 ANSI: 5
[ 2.078675] ata2.00: HPA detected: current 1953523055, native 1953525168
[ 2.078683] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 2.078688] ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.078809] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.078813] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.079067] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.079205] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.084343] ata2.00: configured for UDMA/133
[ 2.084490] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.084711] sd 3:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.084760] sd 3:0:0:0: [sda] Write Protect is off
[ 2.084763] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.084786] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.084798] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.084987] ata6: port disabled. ignoring.
[ 2.087843] sda: sda1 sda2
[ 2.088191] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.117232] registered taskstats version 1
[ 2.123794] rtc_cmos 00:05: setting system clock to 2011-08-24 18:06:36 UTC (1314209196)
[ 2.124770] Freeing unused kernel memory: 604k freed
[ 2.794702] scsi: <fdomain> Detection failed (no card)
[ 2.867770] imm: Version 2.05 (for Linux 2.4.0)
[ 2.968890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.969163] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 2.969179] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 2.969197] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 2.969200] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 2.969349] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 2.969375] ehci_hcd 0000:00:04.1: debug port 1
[ 2.969385] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 2.969405] ehci_hcd 0000:00:04.1: irq 22, io mem 0xe5107000
[ 2.975021] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 2.975326] hub 1-0:1.0: USB hub found
[ 2.975333] hub 1-0:1.0: 10 ports detected
[ 3.005484] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.027950] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.028206] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 21
[ 3.028223] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 21 (level, low) -> IRQ 21
[ 3.028240] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 3.028244] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 3.028375] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 3.028407] ohci_hcd 0000:00:04.0: irq 21, io mem 0xe5108000
[ 3.081265] hub 2-0:1.0: USB hub found
[ 3.081272] hub 2-0:1.0: 10 ports detected
[ 3.106378] sl811: driver sl811-hcd, 19 May 2005
[ 3.277023] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 3.379542] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3.394243] hub 1-3:1.0: USB hub found
[ 3.394556] hub 1-3:1.0: 4 ports detected
[ 3.443116] RPC: Registered named UNIX socket transport module.
[ 3.443120] RPC: Registered udp transport module.
[ 3.443122] RPC: Registered tcp transport module.
[ 3.443124] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.498038] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 3.516027] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.517551] SGI XFS Quota Management subsystem
[ 3.545949] fuse init (API version 7.16)
[ 3.576197] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.576201] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.614319] scsi8 : usb-storage 1-4:1.0
[ 3.639720] iscsi: registered transport (tcp)
[ 3.678682] usb 1-3.1: new full speed USB device number 4 using ehci_hcd
[ 4.616719] scsi 8:0:0:0: Direct-Access WD 3200AAC External 1.65 PQ: 0 ANSI: 4
[ 4.618061] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 4.618195] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.620572] sd 8:0:0:0: [sdb] Write Protect is off
[ 4.620578] sd 8:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 4.622568] sd 8:0:0:0: [sdb] No Caching mode page present
[ 4.622572] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4.627565] sd 8:0:0:0: [sdb] No Caching mode page present
[ 4.627571] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4.628111] sdb: sdb1
[ 4.633566] sd 8:0:0:0: [sdb] No Caching mode page present
[ 4.633571] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4.633576] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 8.857691] usb 1-3.2: new full speed USB device number 5 using ehci_hcd
[ 9.012691] usb 1-3.3: new full speed USB device number 6 using ehci_hcd
[ 9.106521] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3.3/1-3.3:1.0/input/input2
[ 9.106785] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-3.3/input0
[ 9.110391] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3.3/1-3.3:1.1/input/input3
[ 9.111163] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-3.3/input1
[ 9.115809] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-3.3/input2
[ 9.179695] usb 1-3.4: new high speed USB device number 7 using ehci_hcd
[ 9.268449] hub 1-3.4:1.0: USB hub found
[ 9.268809] hub 1-3.4:1.0: 4 ports detected
[ 9.544695] usb 1-3.4.1: new full speed USB device number 8 using ehci_hcd
[ 9.635521] hub 1-3.4.1:1.0: USB hub found
[ 9.635681] hub 1-3.4.1:1.0: 3 ports detected
[ 9.700695] usb 1-3.4.2: new full speed USB device number 9 using ehci_hcd
[ 9.791518] hub 1-3.4.2:1.0: USB hub found
[ 9.791681] hub 1-3.4.2:1.0: 3 ports detected
[ 9.899186] usb 1-3.4.1.2: new full speed USB device number 10 using ehci_hcd
[ 9.989064] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1.2/1-3.4.1.2:1.0/input/input4
[ 9.989321] generic-usb 0003:046D:C70B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:04.1-3.4.1.2/input0
[ 10.052570] usb 1-3.4.1.3: new full speed USB device number 11 using ehci_hcd
[ 10.155768] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1.3/1-3.4.1.3:1.0/input/input5
[ 10.156421] generic-usb 0003:046D:C70C.0005: input,hiddev0,hidraw4: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:04.1-3.4.1.3/input0
[ 10.220571] usb 1-3.4.2.2: new full speed USB device number 12 using ehci_hcd
[ 10.308506] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.2/1-3.4.2.2:1.0/input/input6
[ 10.308765] generic-usb 0003:046D:C70B.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:04.1-3.4.2.2/input0
[ 10.371573] usb 1-3.4.2.3: new full speed USB device number 13 using ehci_hcd
[ 10.464420] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.3/1-3.4.2.3:1.0/input/input7
[ 10.465069] generic-usb 0003:046D:C70C.0007: input,hiddev0,hidraw6: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:04.1-3.4.2.3/input0
[ 23.988478] PM: Starting manual resume from disk
[ 24.075209] VFS: could not find a valid V7 on dm-0.
[ 24.094404] UDF-fs: No partition found (1)
[ 24.099258] EXT2-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[ 24.110141] EXT3-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[ 24.138607] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 26.353983] udevd[5366]: starting version 171
[ 26.974878] WARNING! power/level is deprecated; use power/control instead
[ 27.333588] usb 1-3.4.1.1: new full speed USB device number 14 using ehci_hcd
[ 27.440382] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 27.440611] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 27.440627] forcedeth 0000:00:0f.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
[ 27.440633] forcedeth 0000:00:0f.0: setting latency timer to 64
[ 27.446558] Floppy drive(s): fd0 is 1.44M
[ 27.461673] FDC 0 is a post-1991 82077
[ 27.541016] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 27.541032] firewire_ohci 0000:01:07.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 27.547035] parport_pc 00:0a: reported by Plug and Play ACPI
[ 27.547085] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 27.592280] firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 27.594574] usb 1-3.4.2.1: new full speed USB device number 15 using ehci_hcd
[ 27.765493] ppdev: user-space parallel port driver
[ 27.772872] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 27.939141] Bluetooth: Core ver 2.16
[ 27.939181] NET: Registered protocol family 31
[ 27.939183] Bluetooth: HCI device and connection manager initialized
[ 27.939186] Bluetooth: HCI socket layer initialized
[ 27.939189] Bluetooth: L2CAP socket layer initialized
[ 27.939434] Bluetooth: SCO socket layer initialized
[ 27.963056] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:7d:e6:0b:ed
[ 27.963061] forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 27.963146] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 27.963177] i2c i2c-1: nForce2 SMBus adapter at 0x1c80
[ 27.963293] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 27.963299] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[ 27.963491] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 27.963498] HDA Intel 0000:00:09.0: PCI INT A -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 27.963502] hda_intel: Disabling MSI
[ 27.963539] HDA Intel 0000:00:09.0: setting latency timer to 64
[ 28.011476] nvidia: module license 'NVIDIA' taints kernel.
[ 28.011481] Disabling lock debugging due to kernel taint
[ 28.085980] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 28.087994] usbcore: registered new interface driver btusb
[ 28.273479] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input9
[ 28.866286] firewire_core: created device fw0: GUID 00dc9c5200001d7d, S400
[ 29.117818] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
[ 29.117825] nvidia 0000:00:10.0: PCI INT A -> Link[AIGP] -> GSI 22 (level, low) -> IRQ 22
[ 29.117833] nvidia 0000:00:10.0: setting latency timer to 64
[ 29.117838] vgaarb: device changed decodes: PCI:0000:00:10.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 29.118035] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.09.07 Wed Jun 8 15:42:20 PDT 2011
[ 31.158855] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 31.332439] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 31.450983] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 33.007817] Bluetooth: RFCOMM TTY layer initialized
[ 33.007824] Bluetooth: RFCOMM socket layer initialized
[ 33.007826] Bluetooth: RFCOMM ver 1.11
[ 33.098215] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.098218] Bluetooth: BNEP filters: protocol multicast
[ 34.658033] NET: Registered protocol family 10
[ 36.642386] fbcondecor: console 1 using theme 'sabayon'
[ 36.701230] forcedeth 0000:00:0f.0: irq 43 for MSI/MSI-X
[ 36.719215] fbcondecor: switched decor state to 'on' on console 1
[ 36.806590] fbcondecor: console 2 using theme 'sabayon'
[ 36.882484] fbcondecor: switched decor state to 'on' on console 2
[ 36.962286] fbcondecor: console 3 using theme 'sabayon'
[ 37.038817] fbcondecor: switched decor state to 'on' on console 3
[ 37.122313] fbcondecor: console 4 using theme 'sabayon'
[ 37.198694] fbcondecor: switched decor state to 'on' on console 4
[ 37.279147] fbcondecor: console 5 using theme 'sabayon'
[ 37.355860] fbcondecor: switched decor state to 'on' on console 5
[ 39.153539] Adding 5341180k swap on /dev/mapper/vg_sm0kerzparadize-lv_swap. Priority:-1 extents:1 across:5341180k
[ 47.210031] eth0: no IPv6 routers present
[ 250.549321] ata2.00: configured for UDMA/133
[ 250.549329] ata2: EH complete
[ 250.981428] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[ 251.027936] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 251.201963] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 259.933025] usb 2-7: new full speed USB device number 2 using ohci_hcd
[ 260.144354] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-7/2-7:1.0/input/input10
[ 260.144485] generic-usb 0003:046D:C52B.0008: input,hidraw7: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.0-7/input0
[ 260.151604] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-7/2-7:1.1/input/input11
[ 260.151829] generic-usb 0003:046D:C52B.0009: input,hiddev0,hidraw8: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-7/input1
[ 260.163196] generic-usb 0003:046D:C52B.000A: hiddev0,hidraw9: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-7/input2
Sm0kerZ-ParadiZe ~ #
Any ideas?
