I have some Problems with the graphic on my notebook.
The Notebook is about 8 years old, but I try to install Linux on it.
The Problem: I installed Sabayon Mini. Everything worked slowly, but fine, but when restarting the notebook the graphic-mode (login, KDE,...) works with 800x600 and not with 1024x768 how it should be. It is not possible to change the resolution in the controlcenter. (I can only change to 640x480...^^)
Attached is a copy of my xorg.config. can you help me?
Thanks
donkracho
Section "Files"
#FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/corefonts"
EndSection
# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************
Section "Module"
Load "dbe"
Load "i2c"
Load "glx"
Load "ddc"
Load "type1"
Load "freetype"
Load "extmod"
Load "synaptics"
Load "vbe"
# Load "dri"
EndSection
# **********************************************************************
# Server flags section. This contains various server-wide Options.
# **********************************************************************
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Synaptics1"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
# For ALPS TouchPads
#Option "MaxSpeed" "0.7"
#Option "MinSpeed" "0.18"
#Option "AccelFactor" "0.08"
#Option "TopEdge" "120"
#Option "LeftEdge" "120"
#Option "BottomEdge" "830"
#Option "RightEdge" "650"
#Option "FingerLow" "25"
#Option "FingerHigh" "30"
# Do you keep moving the mouse while typing? Try this trick.
#synclient TouchpadOff=1 disable your synaptics touchpad
#synclient TouchpadOff=0 enable your synaptics touchpad
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 5"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "wacom1"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "wacom2"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "wacom3"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
#Option "DPMS"
VertRefresh 43 - 60
HorizSync 28 - 80
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "VESA"
Driver "vesa" # do not remove vesa
#Option "RenderAccel" "on"
#Option "XAANoOffscreenPixmaps"
#Option "BusType" "PCI"
#Option "ColorTiling" "on"
#Option "EnablePageFlip" "on"
EndSection
# **********************************************************************
# Screen sections.
# **********************************************************************
Section "Screen"
# The Identifier, Device and Monitor lines must be present
Identifier "Screen 1"
Device "VESA"
Monitor "Generic Monitor"
#Option "AddARGBGLXVisuals" "true"
# The favoured Depth and/or Bpp may be specified here
DefaultDepth 24
SubSection "Display"
Depth 8
ViewPort 0 0
Modes "1024x768" "800x600" "640x480"
EndSubsection
SubSection "Display"
Depth 16
ViewPort 0 0
Modes "1024x768" "800x600" "640x480"
EndSubsection
SubSection "Display"
Depth 24
ViewPort 0 0
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Main Layout"
Screen 0 "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
#InputDevice "Synaptics1" "SendCoreEvents"
#InputDevice "wacom1" "SendCoreEvents"
#InputDevice "wacom2" "SendCoreEvents"
#InputDevice "wacom3" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
#Option "Composite" "Enable"
EndSection