I have an HP DV9535 and the top above the keyboard has touch-sensitive buttons. Well the mute button stays locked into.... mute.
I've gone through ever hole alsa had and had no luck getting any audio to work whatsoever.
Anyone here who can help?
No Audio on Laptop
Moderator: Moderators
5 posts
• Page 1 of 1
No Audio on Laptop
by UberMan » Mon Sep 10, 2007 6:37
- UberMan
- Baby Hen
- Posts: 3
- Joined: Mon Sep 10, 2007 6:34
Re: No Audio on Laptop
by UberMan » Mon Sep 10, 2007 14:53
Yes, I did.
Also note that I have an ICH8 family audio card. I forgot to mention that earlier.
Also note that I have an ICH8 family audio card. I forgot to mention that earlier.
- UberMan
- Baby Hen
- Posts: 3
- Joined: Mon Sep 10, 2007 6:34
Re: No Audio on Laptop
by UberMan » Mon Sep 10, 2007 18:58
When I ran command lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0425 (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:09.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)
07:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
When I ran command lsmod
Module Size Used by
snd_seq_dummy 5508 0
snd_seq_oss 33920 0
snd_seq_midi_event 9472 1 snd_seq_oss
snd_seq 56096 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10004 3 snd_seq_dummy,snd_seq_oss,snd_seq
vboxdrv 1629184 0
nvidia 8116152 36
sdhci 20108 0
mmc_core 31880 1 sdhci
snd_hda_intel 309536 0
i2c_i801 10652 0
i2c_core 28672 2 nvidia,i2c_i801
iwl4965 103396 0
mac80211 156936 1 iwl4965
intel_agp 29216 0
r8169 33032 0
joydev 12800 0
tg3 109188 0
e1000 123584 0
scsi_wait_scan 2816 0
sl811_hcd 14720 0
uhci_hcd 27040 0
ehci_hcd 35852 0
When I ran command dmesg
n'
[ 20.741387] fbsplash: switched splash state to 'on' on console 0
[ 20.741873] fb0: VESA VGA frame buffer device
[ 20.742362] ACPI: AC Adapter [ACAD] (on-line)
[ 20.803208] ACPI: Battery Slot [BAT0] (battery present)
[ 20.803355] input: Power Button (FF) as /class/input/input0
[ 20.803361] ACPI: Power Button (FF) [PWRF]
[ 20.803430] input: Power Button (CM) as /class/input/input1
[ 20.803438] ACPI: Power Button (CM) [PWRB]
[ 20.803504] input: Sleep Button (CM) as /class/input/input2
[ 20.803508] ACPI: Sleep Button (CM) [SLPB]
[ 20.803588] input: Lid Switch as /class/input/input3
[ 20.803591] ACPI: Lid Switch [LID]
[ 20.805177] set_level status: 0
[ 20.805252] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.805815] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.806298] ACPI: SSDT 7FED30F2, 01B4 (r1 HP 30CB 3000 INTL 20060707)
[ 20.806612] ACPI: SSDT 7FED2BC3, 04AA (r1 HP 30CB 3001 INTL 20060707)
[ 20.807235] Monitor-Mwait will be used to enter C-1 state
[ 20.807239] Monitor-Mwait will be used to enter C-2 state
[ 20.807242] Monitor-Mwait will be used to enter C-3 state
[ 20.807248] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 20.807254] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.807624] ACPI: SSDT 7FED32A6, 00C8 (r1 HP 30CB 3000 INTL 20060707)
[ 20.807922] ACPI: SSDT 7FED306D, 0085 (r1 HP 30CB 3000 INTL 20060707)
[ 20.808623] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 20.808629] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 20.812287] ACPI Exception (thermal-0311): AE_BAD_DATA, No critical threshold [20070126]
[ 20.812399] ibm_acpi: ec object not found
[ 20.812406] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.813464] PCI driver parport_pc lacks driver specific resume support.
[ 20.871531] Device driver 00241b001c603300 lacks bus and class support for being resumed.
[ 20.871584] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b001c603300]
[ 21.002138] floppy0: no floppy controllers found
[ 21.003186] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 21.003717] loop: module loaded
[ 21.003719] Compaq SMART2 Driver (v 2.6.0)
[ 21.003785] PCI driver cpqarray lacks driver specific resume support.
[ 21.003788] HP CISS Driver (v 3.6.14)
[ 21.003844] PCI driver cciss lacks driver specific resume support.
[ 21.003914] PCI driver DAC960 lacks driver specific resume support.
[ 21.004071] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 21.004135] PCI driver umem lacks driver specific resume support.
[ 21.004139] MM: desc_per_page = 128
[ 21.004236] Device driver lo lacks bus and class support for being resumed.
[ 21.004360] PCI driver hp100 lacks driver specific resume support.
[ 21.004436] input: Macintosh mouse button emulation as /class/input/input4
[ 21.004469] Loading iSCSI transport class v2.0-724.
[ 21.004585] iscsi: registered transport (tcp)
[ 21.004691] PCI driver arcmsr lacks driver specific resume support.
[ 21.004783] PCI driver aic7xxx lacks driver specific resume support.
[ 21.004868] PCI driver aic79xx lacks driver specific resume support.
[ 21.004871] Adaptec aacraid driver (1.1-5[2437]-mh4)
[ 21.004948] PCI driver aacraid lacks driver specific resume support.
[ 21.004973] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 21.005057] PCI driver aic94xx lacks driver specific resume support.
[ 21.005179] PCI driver ips lacks driver specific resume support.
[ 21.005268] PCI driver qla1280 lacks driver specific resume support.
[ 21.005282] QLogic Fibre Channel HBA Driver
[ 21.005348] PCI driver qla2xxx lacks driver specific resume support.
[ 21.005456] iscsi: registered transport (qla4xxx)
[ 21.005511] PCI driver qla4xxx lacks driver specific resume support.
[ 21.005513] QLogic iSCSI HBA Driver
[ 21.005515] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[ 21.005517] Copyright(c) 2004-2007 Emulex. All rights reserved.
[ 21.005578] PCI driver lpfc lacks driver specific resume support.
[ 21.005632] PCI driver dmx3191d lacks driver specific resume support.
[ 21.005704] PCI driver sym53c8xx lacks driver specific resume support.
[ 21.005814] PCI driver dc395x lacks driver specific resume support.
[ 21.005818] DC390: clustering now enabled by default. If you get problems load
[ 21.005819] with "disable_clustering=1" and report to maintainers
[ 21.005879] PCI driver tmscsim lacks driver specific resume support.
[ 21.005937] PCI driver megaraid_legacy lacks driver specific resume support.
[ 21.005942] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 21.005946] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 21.006004] PCI driver megaraid lacks driver specific resume support.
[ 21.006007] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 21.006079] PCI driver megaraid_sas lacks driver specific resume support.
[ 21.006155] PCI driver atp870u lacks driver specific resume support.
[ 21.006158] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 21.006406] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 21.006463] PCI driver inia100 lacks driver specific resume support.
[ 21.006466] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 21.006518] PCI driver 3w-xxxx lacks driver specific resume support.
[ 21.006521] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 21.006576] PCI driver 3w-9xxx lacks driver specific resume support.
[ 21.006579] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 21.006659] PCI driver ipr lacks driver specific resume support.
[ 21.006662] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 21.006725] PCI driver hptiop lacks driver specific resume support.
[ 21.006728] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 21.006797] PCI driver stex lacks driver specific resume support.
[ 21.006801] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 21.006858] osst :I: Tape driver with OnStream support version 0.99.4
[ 21.006859] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 21.007122] ahci 0000:00:1f.2: version 2.2
[ 21.007147] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 21.063457] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 21.063461] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 21.063467] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.063718] scsi0 : ahci
[ 21.063742] Device driver host0 lacks bus and class support for being resumed.
[ 21.063849] scsi1 : ahci
[ 21.063862] Device driver host1 lacks bus and class support for being resumed.
[ 21.063988] scsi2 : ahci
[ 21.064002] Device driver host2 lacks bus and class support for being resumed.
[ 21.064054] ata1: SATA max UDMA/133 cmd 0xffffc2000034e100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 21.064060] ata2: SATA max UDMA/133 cmd 0xffffc2000034e180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 21.064065] ata3: SATA max UDMA/133 cmd 0xffffc2000034e200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 21.097148] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.097559] ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
[ 21.097562] ata1.00: 234441648 sectors, multi 16: LBA48
[ 21.098098] ata1.00: configured for UDMA/100
[ 21.113539] ata2: SATA link down (SStatus 0 SControl 300)
[ 21.136859] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.137251] ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
[ 21.137255] ata3.00: 234441648 sectors, multi 16: LBA48
[ 21.137781] ata3.00: configured for UDMA/100
[ 21.137822] Device driver target0:0:0 lacks bus and class support for being resumed.
[ 21.137945] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
[ 21.138156] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 21.138175] sd 0:0:0:0: [sda] Write Protect is off
[ 21.138178] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.138215] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.138303] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 21.138337] sd 0:0:0:0: [sda] Write Protect is off
[ 21.138340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.138368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.138372] sda: sda1 sda2
[ 21.222252] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.222395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.222426] Device driver target2:0:0 lacks bus and class support for being resumed.
[ 21.222496] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
[ 21.222682] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 21.222711] sd 2:0:0:0: [sdb] Write Protect is off
[ 21.222715] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.222760] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.222822] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 21.222847] sd 2:0:0:0: [sdb] Write Protect is off
[ 21.222849] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.222914] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.222917] sdb: sdb1 sdb2
[ 21.308088] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 21.308197] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 21.308306] PCI driver sata_svw lacks driver specific resume support.
[ 21.308383] ata_piix 0000:00:1f.1: version 2.11
[ 21.308396] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 21.308426] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.308502] scsi3 : ata_piix
[ 21.308513] Device driver host3 lacks bus and class support for being resumed.
[ 21.308625] scsi4 : ata_piix
[ 21.308638] Device driver host4 lacks bus and class support for being resumed.
[ 21.308717] ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118a0 irq 14
[ 21.308721] ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118a8 irq 15
[ 21.325809] ata4.00: ATAPI: MATSHITADVD-RAM UJ-851S, 1.50, max MWDMA2
[ 21.334574] ata4.00: configured for MWDMA2
[ 21.355939] Device driver target3:0:0 lacks bus and class support for being resumed.
[ 21.357145] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50 PQ: 0 ANSI: 5
[ 21.363286] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.363289] Uniform CD-ROM driver Revision: 3.20
[ 21.363374] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 21.363509] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 21.363610] PCI driver sata_promise lacks driver specific resume support.
[ 21.363662] PCI driver sata_qstor lacks driver specific resume support.
[ 21.363927] PCI driver sata_vsc lacks driver specific resume support.
[ 21.363987] PCI driver sata_sis lacks driver specific resume support.
[ 21.364066] PCI driver sata_sx4 lacks driver specific resume support.
[ 21.364196] PCI driver sata_uli lacks driver specific resume support.
[ 21.364262] PCI driver sata_mv lacks driver specific resume support.
[ 21.364407] PCI driver pdc_adma lacks driver specific resume support.
[ 21.364594] PCI driver pata_artop lacks driver specific resume support.
[ 21.365154] PCI driver pata_hpt37x lacks driver specific resume support.
[ 21.365225] PCI driver pata_hpt3x2n lacks driver specific resume support.
[ 21.365931] PCI driver pata_pdc2027x lacks driver specific resume support.
[ 21.366365] PCI driver pata_sl82c105 lacks driver specific resume support.
[ 21.366554] I2O subsystem v1.325
[ 21.366557] i2o: max drivers = 8
[ 21.366821] PCI driver PCI_I2O lacks driver specific resume support.
[ 21.366824] I2O Configuration OSM v1.323
[ 21.366956] I2O Bus Adapter OSM v1.317
[ 21.367014] I2O Block Device OSM v1.325
[ 21.367217] I2O SCSI Peripheral OSM v1.316
[ 21.367274] I2O ProcFS OSM v1.316
[ 21.367315] Fusion MPT base driver 3.04.04
[ 21.367317] Copyright (c) 1999-2007 LSI Logic Corporation
[ 21.367322] Fusion MPT SPI Host driver 3.04.04
[ 21.367392] Fusion MPT FC Host driver 3.04.04
[ 21.367479] Fusion MPT SAS Host driver 3.04.04
[ 21.367561] Fusion MPT misc device (ioctl) driver 3.04.04
[ 21.367611] mptctl: Registered with Fusion MPT base driver
[ 21.367614] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 21.367617] Fusion MPT LAN driver 3.04.04
[ 21.367765] usbcore: registered new interface driver usblp
[ 21.367768] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 21.367770] Initializing USB Mass Storage driver...
[ 21.367837] usbcore: registered new interface driver usb-storage
[ 21.367840] USB Mass Storage support registered.
[ 21.367889] usbcore: registered new interface driver libusual
[ 21.367892] USB driver libusual lacks resume support.
[ 21.368037] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 21.408423] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.408428] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.413924] parkbd: no such parport
[ 21.414053] PCI driver pcips2 lacks driver specific resume support.
[ 21.414252] mice: PS/2 mouse device common for all mice
[ 21.420780] input: AT Translated Set 2 keyboard as /class/input/input5
[ 21.662042] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 21.694441] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 21.696725] md: linear personality registered for level -1
[ 21.696729] md: raid0 personality registered for level 0
[ 21.696733] md: raid1 personality registered for level 1
[ 21.696737] md: raid10 personality registered for level 10
[ 21.712960] raid6: int64x1 1402 MB/s
[ 21.729953] raid6: int64x2 1710 MB/s
[ 21.746938] raid6: int64x4 1617 MB/s
[ 21.763971] raid6: int64x8 1093 MB/s
[ 21.780911] raid6: sse2x1 2492 MB/s
[ 21.797911] raid6: sse2x2 2582 MB/s
[ 21.814882] raid6: sse2x4 4441 MB/s
[ 21.814884] raid6: using algorithm sse2x4 (4441 MB/s)
[ 21.814887] md: raid6 personality registered for level 6
[ 21.814890] md: raid5 personality registered for level 5
[ 21.814892] md: raid4 personality registered for level 4
[ 21.814895] raid5: automatically using best checksumming function: generic_sse
[ 21.819889] generic_sse: 5556.000 MB/sec
[ 21.819892] raid5: using function: generic_sse (5556.000 MB/sec)
[ 21.819895] md: multipath personality registered for level -4
[ 21.819898] md: faulty personality registered for level -5
[ 21.819999] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 21.820259] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 21.820321] usbcore: registered new interface driver hiddev
[ 21.820325] USB driver hiddev lacks resume support.
[ 21.820386] usbcore: registered new interface driver usbhid
[ 21.820389] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 21.820423] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 21.820485] ALSA device list:
[ 21.820487] No soundcards found.
[ 21.820559] TCP bic registered
[ 21.820570] NET: Registered protocol family 1
[ 21.820574] NET: Registered protocol family 17
[ 21.821412] Suspend v2.2.10
[ 21.821478] Suspend2 Checksumming support registered.
[ 21.821521] Suspend2 Userspace Storage Manager support registered.
[ 21.821563] Suspend2 Basic User Interface support registered.
[ 21.821615] Suspend2 Compressor support registered.
[ 21.821687] Suspend2 Block I/O support registered.
[ 21.821745] Suspend2 Swap Allocator support registered.
[ 21.821787] Suspend2 File Allocator support registered.
[ 21.821795] Suspend2 Userspace UI support registered.
[ 21.822002] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 21.822010] Freeing unused kernel memory: 396k freed
[ 22.028126] ata1: soft resetting port
[ 22.036142] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.037059] ata1.00: configured for UDMA/100
[ 22.037065] ata1: EH complete
[ 22.037128] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 22.037148] sd 0:0:0:0: [sda] Write Protect is off
[ 22.037152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.037180] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.207768] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.208407] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 22.208413] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 22.208563] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 22.208599] ehci_hcd 0000:00:1a.7: debug port 1
[ 22.208605] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 22.208616] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
[ 22.212515] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.212710] Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
[ 22.212722] usb usb1: configuration #1 chosen from 1 choice
[ 22.212789] hub 1-0:1.0: USB hub found
[ 22.212795] hub 1-0:1.0: 4 ports detected
[ 22.225792] Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
[ 22.225898] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 22.226464] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 22.226469] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 22.226601] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 22.226636] ehci_hcd 0000:00:1d.7: debug port 1
[ 22.226654] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 22.226665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504c00
[ 22.230539] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.230767] Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
[ 22.230780] usb usb2: configuration #1 chosen from 1 choice
[ 22.230894] hub 2-0:1.0: USB hub found
[ 22.230901] hub 2-0:1.0: 6 ports detected
[ 22.238895] Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
[ 22.270022] USB Universal Host Controller Interface driver v3.0
[ 22.270142] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.270155] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 22.270159] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 22.270255] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 22.270291] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 22.270491] Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
[ 22.270503] usb usb3: configuration #1 chosen from 1 choice
[ 22.270589] hub 3-0:1.0: USB hub found
[ 22.270596] hub 3-0:1.0: 2 ports detected
[ 22.283739] Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
[ 22.283832] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 22.283840] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 22.283844] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 22.283903] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 22.283934] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 22.284128] Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
[ 22.284138] usb usb4: configuration #1 chosen from 1 choice
[ 22.284247] hub 4-0:1.0: USB hub found
[ 22.284253] hub 4-0:1.0: 2 ports detected
[ 22.292469] Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
[ 22.292560] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 22.292568] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.292572] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.292636] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 22.292665] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 22.292839] Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.
[ 22.292849] usb usb5: configuration #1 chosen from 1 choice
[ 22.292958] hub 5-0:1.0: USB hub found
[ 22.292964] hub 5-0:1.0: 2 ports detected
[ 22.296418] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 22.315379] Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.
[ 22.315467] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 22.315475] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.315479] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.315537] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 22.315567] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 22.315744] Device driver usbdev6.1_ep00 lacks bus and class support for being resumed.
[ 22.315755] usb usb6: configuration #1 chosen from 1 choice
[ 22.315866] hub 6-0:1.0: USB hub found
[ 22.315873] hub 6-0:1.0: 2 ports detected
[ 22.342807] Device driver usbdev2.2_ep00 lacks bus and class support for being resumed.
[ 22.342817] usb 2-4: configuration #1 chosen from 1 choice
[ 22.344599] Device driver usbdev2.2_ep83 lacks bus and class support for being resumed.
[ 22.359740] Device driver usbdev6.1_ep81 lacks bus and class support for being resumed.
[ 22.359829] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.359837] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.359841] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.359903] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 22.359932] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 22.360104] Device driver usbdev7.1_ep00 lacks bus and class support for being resumed.
[ 22.360114] usb usb7: configuration #1 chosen from 1 choice
[ 22.360223] hub 7-0:1.0: USB hub found
[ 22.360231] hub 7-0:1.0: 2 ports detected
[ 22.372124] Device driver usbdev7.1_ep81 lacks bus and class support for being resumed.
[ 22.426982] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 22.451716] sl811: driver sl811-hcd, 19 May 2005
[ 22.580548] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[ 22.580552] Copyright (c) 1999-2006 Intel Corporation.
[ 22.594538] Device driver usbdev4.2_ep00 lacks bus and class support for being resumed.
[ 22.594550] usb 4-1: configuration #1 chosen from 1 choice
[ 22.628348] input: Microsoft Microsoft Wireless Optical Mouse� 1.00 as /class/input/input7
[ 22.628560] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse� 1.00] on usb-0000:00:1a.1-1
[ 22.628638] Device driver usbdev4.2_ep81 lacks bus and class support for being resumed.
[ 23.001771] No storage allocator is currently active. Rechecking whether we can use one.
[ 23.018220] Suspend2: SwapAllocator: Signature found.
[ 23.018225] Suspend2: Resuming enabled.
[ 23.024572] Suspend2: Failed to initialise the lzf compression transform.
[ 23.024808] Suspend2: Normal swapspace found.
[ 23.074159] kjournald starting. Commit interval 5 seconds
[ 23.074169] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.437203] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 26.437234] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 26.437265] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 26.437777] Device driver eth0 lacks bus and class support for being resumed.
[ 26.437802] eth0: RTL8168b/8111b at 0xffffc20000354000, 00:1b:24:67:09:4d, IRQ 17
[ 26.698442] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 0.0.25k
[ 26.698448] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 26.698830] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.698862] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 26.699500] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 26.699808] Device driver 0000:02:00.0 lacks bus and class support for being resumed.
[ 26.935053] sdhci: Secure Digital Host Controller Interface driver
[ 26.935057] sdhci: Copyright(c) Pierre Ossman
[ 27.265499] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 27.265731] Device driver i2c-0 lacks bus and class support for being resumed.
[ 27.274528] sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
[ 27.274555] ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 27.275435] Device driver mmc0 lacks bus and class support for being resumed.
[ 27.275450] mmc0: SDHCI at 0xf8200800 irq 21 DMA
[ 27.281642] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 27.282247] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 27.559811] nvidia: module license 'NVIDIA' taints kernel.
[ 27.656859] iwl4965: Channel 12 [2.4GHz] is Tx only -- skipping.
[ 27.656863] iwl4965: Channel 13 [2.4GHz] is Tx only -- skipping.
[ 27.656866] iwl4965: Channel 14 [2.4GHz] is Tx only -- skipping.
[ 27.656868] iwl4965: Channel 183 [5.2GHz] is Tx only -- skipping.
[ 27.656871] iwl4965: Channel 184 [5.2GHz] is Tx only -- skipping.
[ 27.656873] iwl4965: Channel 185 [5.2GHz] is Tx only -- skipping.
[ 27.656876] iwl4965: Channel 187 [5.2GHz] is Tx only -- skipping.
[ 27.656878] iwl4965: Channel 188 [5.2GHz] is Tx only -- skipping.
[ 27.656880] iwl4965: Channel 189 [5.2GHz] is Tx only -- skipping.
[ 27.656883] iwl4965: Channel 192 [5.2GHz] is Tx only -- skipping.
[ 27.656886] iwl4965: Channel 196 [5.2GHz] is Tx only -- skipping.
[ 27.656889] iwl4965: Channel 7 [5.2GHz] is Tx only -- skipping.
[ 27.656891] iwl4965: Channel 8 [5.2GHz] is Tx only -- skipping.
[ 27.656893] iwl4965: Channel 11 [5.2GHz] is Tx only -- skipping.
[ 27.656896] iwl4965: Channel 12 [5.2GHz] is Tx only -- skipping.
[ 27.656898] iwl4965: Channel 16 [5.2GHz] is Tx only -- skipping.
[ 27.656901] iwl4965: Channel 34 [5.2GHz] is Tx only -- skipping.
[ 27.656903] iwl4965: Channel 38 [5.2GHz] is Tx only -- skipping.
[ 27.656905] iwl4965: Channel 42 [5.2GHz] is Tx only -- skipping.
[ 27.656908] iwl4965: Channel 46 [5.2GHz] is Tx only -- skipping.
[ 27.656910] iwl4965: Channel 100 [5.2GHz] is Tx only -- skipping.
[ 27.656913] iwl4965: Channel 104 [5.2GHz] is Tx only -- skipping.
[ 27.656915] iwl4965: Channel 108 [5.2GHz] is Tx only -- skipping.
[ 27.656918] iwl4965: Channel 112 [5.2GHz] is Tx only -- skipping.
[ 27.656920] iwl4965: Channel 116 [5.2GHz] is Tx only -- skipping.
[ 27.656923] iwl4965: Channel 120 [5.2GHz] is Tx only -- skipping.
[ 27.656925] iwl4965: Channel 124 [5.2GHz] is Tx only -- skipping.
[ 27.656927] iwl4965: Channel 128 [5.2GHz] is Tx only -- skipping.
[ 27.656930] iwl4965: Channel 132 [5.2GHz] is Tx only -- skipping.
[ 27.656932] iwl4965: Channel 136 [5.2GHz] is Tx only -- skipping.
[ 27.656935] iwl4965: Channel 140 [5.2GHz] is Tx only -- skipping.
[ 27.656937] iwl4965: Channel 145 [5.2GHz] is Tx only -- skipping.
[ 27.656940] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 27.657028] Device driver phy0 lacks bus and class support for being resumed.
[ 27.657897] Device driver wmaster0 lacks bus and class support for being resumed.
[ 27.657924] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 27.677912] Device driver wlan0 lacks bus and class support for being resumed.
[ 27.907497] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.907509] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 27.907652] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007
[ 31.660440] EXT3 FS on dm-0, internal journal
[ 31.990556] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 31.990560] vboxdrv: Successfully done.
[ 32.458488] kjournald starting. Commit interval 5 seconds
[ 32.458724] EXT3 FS on sdb1, internal journal
[ 32.458732] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.538509] Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
[ 52.493440] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 52.512490] NFSD: starting 90-second grace period
[ 53.352819] fbsplash: console 1 using theme 'sabayon'
[ 53.360171] fbsplash: switched splash state to 'on' on console 1
[ 53.373344] fbsplash: console 2 using theme 'sabayon'
[ 53.380630] fbsplash: switched splash state to 'on' on console 2
[ 53.391917] fbsplash: console 3 using theme 'sabayon'
[ 53.400365] fbsplash: switched splash state to 'on' on console 3
[ 53.412325] fbsplash: console 4 using theme 'sabayon'
[ 53.419477] fbsplash: switched splash state to 'on' on console 4
[ 53.431384] fbsplash: console 5 using theme 'sabayon'
[ 53.438521] fbsplash: switched splash state to 'on' on console 5
[ 53.447664] fbsplash: console 11 using theme 'sabayon'
[ 53.453812] fbsplash: switched splash state to 'on' on console 11
[ 57.288040] Device driver i2c-1 lacks bus and class support for being resumed.
[ 57.288066] Device driver i2c-2 lacks bus and class support for being resumed.
[ 57.288089] Device driver i2c-3 lacks bus and class support for being resumed.
[ 60.029160] r8169: eth0: link down
[ 66.196212] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 67.199276] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 185.357781] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 186.362755] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 196.515574] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 197.519413] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 264.072501] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 265.074647] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 403.060507] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 404.064066] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 468.950819] iwl4965: REPLY_ADD_STA failed
[ 468.950895] wlan0: Initial auth_alg=0
[ 468.950900] wlan0: authenticate with AP 00:1a:70:87:9f:76
[ 468.952694] wlan0: RX authentication from 00:1a:70:87:9f:76 (alg=0 transaction=2 status=0)
[ 468.952701] wlan0: authenticated
[ 468.952706] wlan0: associate with AP 00:1a:70:87:9f:76
[ 468.955042] wlan0: RX AssocResp from 00:1a:70:87:9f:76 (capab=0x1 status=0 aid=2)
[ 468.955048] wlan0: associated
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0425 (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:09.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)
07:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
When I ran command lsmod
Module Size Used by
snd_seq_dummy 5508 0
snd_seq_oss 33920 0
snd_seq_midi_event 9472 1 snd_seq_oss
snd_seq 56096 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10004 3 snd_seq_dummy,snd_seq_oss,snd_seq
vboxdrv 1629184 0
nvidia 8116152 36
sdhci 20108 0
mmc_core 31880 1 sdhci
snd_hda_intel 309536 0
i2c_i801 10652 0
i2c_core 28672 2 nvidia,i2c_i801
iwl4965 103396 0
mac80211 156936 1 iwl4965
intel_agp 29216 0
r8169 33032 0
joydev 12800 0
tg3 109188 0
e1000 123584 0
scsi_wait_scan 2816 0
sl811_hcd 14720 0
uhci_hcd 27040 0
ehci_hcd 35852 0
When I ran command dmesg
n'
[ 20.741387] fbsplash: switched splash state to 'on' on console 0
[ 20.741873] fb0: VESA VGA frame buffer device
[ 20.742362] ACPI: AC Adapter [ACAD] (on-line)
[ 20.803208] ACPI: Battery Slot [BAT0] (battery present)
[ 20.803355] input: Power Button (FF) as /class/input/input0
[ 20.803361] ACPI: Power Button (FF) [PWRF]
[ 20.803430] input: Power Button (CM) as /class/input/input1
[ 20.803438] ACPI: Power Button (CM) [PWRB]
[ 20.803504] input: Sleep Button (CM) as /class/input/input2
[ 20.803508] ACPI: Sleep Button (CM) [SLPB]
[ 20.803588] input: Lid Switch as /class/input/input3
[ 20.803591] ACPI: Lid Switch [LID]
[ 20.805177] set_level status: 0
[ 20.805252] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.805815] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.806298] ACPI: SSDT 7FED30F2, 01B4 (r1 HP 30CB 3000 INTL 20060707)
[ 20.806612] ACPI: SSDT 7FED2BC3, 04AA (r1 HP 30CB 3001 INTL 20060707)
[ 20.807235] Monitor-Mwait will be used to enter C-1 state
[ 20.807239] Monitor-Mwait will be used to enter C-2 state
[ 20.807242] Monitor-Mwait will be used to enter C-3 state
[ 20.807248] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 20.807254] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.807624] ACPI: SSDT 7FED32A6, 00C8 (r1 HP 30CB 3000 INTL 20060707)
[ 20.807922] ACPI: SSDT 7FED306D, 0085 (r1 HP 30CB 3000 INTL 20060707)
[ 20.808623] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 20.808629] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 20.812287] ACPI Exception (thermal-0311): AE_BAD_DATA, No critical threshold [20070126]
[ 20.812399] ibm_acpi: ec object not found
[ 20.812406] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.813464] PCI driver parport_pc lacks driver specific resume support.
[ 20.871531] Device driver 00241b001c603300 lacks bus and class support for being resumed.
[ 20.871584] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b001c603300]
[ 21.002138] floppy0: no floppy controllers found
[ 21.003186] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 21.003717] loop: module loaded
[ 21.003719] Compaq SMART2 Driver (v 2.6.0)
[ 21.003785] PCI driver cpqarray lacks driver specific resume support.
[ 21.003788] HP CISS Driver (v 3.6.14)
[ 21.003844] PCI driver cciss lacks driver specific resume support.
[ 21.003914] PCI driver DAC960 lacks driver specific resume support.
[ 21.004071] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 21.004135] PCI driver umem lacks driver specific resume support.
[ 21.004139] MM: desc_per_page = 128
[ 21.004236] Device driver lo lacks bus and class support for being resumed.
[ 21.004360] PCI driver hp100 lacks driver specific resume support.
[ 21.004436] input: Macintosh mouse button emulation as /class/input/input4
[ 21.004469] Loading iSCSI transport class v2.0-724.
[ 21.004585] iscsi: registered transport (tcp)
[ 21.004691] PCI driver arcmsr lacks driver specific resume support.
[ 21.004783] PCI driver aic7xxx lacks driver specific resume support.
[ 21.004868] PCI driver aic79xx lacks driver specific resume support.
[ 21.004871] Adaptec aacraid driver (1.1-5[2437]-mh4)
[ 21.004948] PCI driver aacraid lacks driver specific resume support.
[ 21.004973] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 21.005057] PCI driver aic94xx lacks driver specific resume support.
[ 21.005179] PCI driver ips lacks driver specific resume support.
[ 21.005268] PCI driver qla1280 lacks driver specific resume support.
[ 21.005282] QLogic Fibre Channel HBA Driver
[ 21.005348] PCI driver qla2xxx lacks driver specific resume support.
[ 21.005456] iscsi: registered transport (qla4xxx)
[ 21.005511] PCI driver qla4xxx lacks driver specific resume support.
[ 21.005513] QLogic iSCSI HBA Driver
[ 21.005515] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[ 21.005517] Copyright(c) 2004-2007 Emulex. All rights reserved.
[ 21.005578] PCI driver lpfc lacks driver specific resume support.
[ 21.005632] PCI driver dmx3191d lacks driver specific resume support.
[ 21.005704] PCI driver sym53c8xx lacks driver specific resume support.
[ 21.005814] PCI driver dc395x lacks driver specific resume support.
[ 21.005818] DC390: clustering now enabled by default. If you get problems load
[ 21.005819] with "disable_clustering=1" and report to maintainers
[ 21.005879] PCI driver tmscsim lacks driver specific resume support.
[ 21.005937] PCI driver megaraid_legacy lacks driver specific resume support.
[ 21.005942] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 21.005946] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 21.006004] PCI driver megaraid lacks driver specific resume support.
[ 21.006007] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 21.006079] PCI driver megaraid_sas lacks driver specific resume support.
[ 21.006155] PCI driver atp870u lacks driver specific resume support.
[ 21.006158] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 21.006406] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 21.006463] PCI driver inia100 lacks driver specific resume support.
[ 21.006466] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 21.006518] PCI driver 3w-xxxx lacks driver specific resume support.
[ 21.006521] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 21.006576] PCI driver 3w-9xxx lacks driver specific resume support.
[ 21.006579] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 21.006659] PCI driver ipr lacks driver specific resume support.
[ 21.006662] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 21.006725] PCI driver hptiop lacks driver specific resume support.
[ 21.006728] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 21.006797] PCI driver stex lacks driver specific resume support.
[ 21.006801] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 21.006858] osst :I: Tape driver with OnStream support version 0.99.4
[ 21.006859] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 21.007122] ahci 0000:00:1f.2: version 2.2
[ 21.007147] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 21.063457] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 21.063461] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 21.063467] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.063718] scsi0 : ahci
[ 21.063742] Device driver host0 lacks bus and class support for being resumed.
[ 21.063849] scsi1 : ahci
[ 21.063862] Device driver host1 lacks bus and class support for being resumed.
[ 21.063988] scsi2 : ahci
[ 21.064002] Device driver host2 lacks bus and class support for being resumed.
[ 21.064054] ata1: SATA max UDMA/133 cmd 0xffffc2000034e100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 21.064060] ata2: SATA max UDMA/133 cmd 0xffffc2000034e180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 21.064065] ata3: SATA max UDMA/133 cmd 0xffffc2000034e200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 21.097148] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.097559] ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
[ 21.097562] ata1.00: 234441648 sectors, multi 16: LBA48
[ 21.098098] ata1.00: configured for UDMA/100
[ 21.113539] ata2: SATA link down (SStatus 0 SControl 300)
[ 21.136859] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.137251] ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
[ 21.137255] ata3.00: 234441648 sectors, multi 16: LBA48
[ 21.137781] ata3.00: configured for UDMA/100
[ 21.137822] Device driver target0:0:0 lacks bus and class support for being resumed.
[ 21.137945] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
[ 21.138156] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 21.138175] sd 0:0:0:0: [sda] Write Protect is off
[ 21.138178] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.138215] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.138303] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 21.138337] sd 0:0:0:0: [sda] Write Protect is off
[ 21.138340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.138368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.138372] sda: sda1 sda2
[ 21.222252] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.222395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.222426] Device driver target2:0:0 lacks bus and class support for being resumed.
[ 21.222496] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
[ 21.222682] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 21.222711] sd 2:0:0:0: [sdb] Write Protect is off
[ 21.222715] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.222760] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.222822] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 21.222847] sd 2:0:0:0: [sdb] Write Protect is off
[ 21.222849] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.222914] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.222917] sdb: sdb1 sdb2
[ 21.308088] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 21.308197] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 21.308306] PCI driver sata_svw lacks driver specific resume support.
[ 21.308383] ata_piix 0000:00:1f.1: version 2.11
[ 21.308396] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 21.308426] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.308502] scsi3 : ata_piix
[ 21.308513] Device driver host3 lacks bus and class support for being resumed.
[ 21.308625] scsi4 : ata_piix
[ 21.308638] Device driver host4 lacks bus and class support for being resumed.
[ 21.308717] ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118a0 irq 14
[ 21.308721] ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118a8 irq 15
[ 21.325809] ata4.00: ATAPI: MATSHITADVD-RAM UJ-851S, 1.50, max MWDMA2
[ 21.334574] ata4.00: configured for MWDMA2
[ 21.355939] Device driver target3:0:0 lacks bus and class support for being resumed.
[ 21.357145] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50 PQ: 0 ANSI: 5
[ 21.363286] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.363289] Uniform CD-ROM driver Revision: 3.20
[ 21.363374] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 21.363509] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 21.363610] PCI driver sata_promise lacks driver specific resume support.
[ 21.363662] PCI driver sata_qstor lacks driver specific resume support.
[ 21.363927] PCI driver sata_vsc lacks driver specific resume support.
[ 21.363987] PCI driver sata_sis lacks driver specific resume support.
[ 21.364066] PCI driver sata_sx4 lacks driver specific resume support.
[ 21.364196] PCI driver sata_uli lacks driver specific resume support.
[ 21.364262] PCI driver sata_mv lacks driver specific resume support.
[ 21.364407] PCI driver pdc_adma lacks driver specific resume support.
[ 21.364594] PCI driver pata_artop lacks driver specific resume support.
[ 21.365154] PCI driver pata_hpt37x lacks driver specific resume support.
[ 21.365225] PCI driver pata_hpt3x2n lacks driver specific resume support.
[ 21.365931] PCI driver pata_pdc2027x lacks driver specific resume support.
[ 21.366365] PCI driver pata_sl82c105 lacks driver specific resume support.
[ 21.366554] I2O subsystem v1.325
[ 21.366557] i2o: max drivers = 8
[ 21.366821] PCI driver PCI_I2O lacks driver specific resume support.
[ 21.366824] I2O Configuration OSM v1.323
[ 21.366956] I2O Bus Adapter OSM v1.317
[ 21.367014] I2O Block Device OSM v1.325
[ 21.367217] I2O SCSI Peripheral OSM v1.316
[ 21.367274] I2O ProcFS OSM v1.316
[ 21.367315] Fusion MPT base driver 3.04.04
[ 21.367317] Copyright (c) 1999-2007 LSI Logic Corporation
[ 21.367322] Fusion MPT SPI Host driver 3.04.04
[ 21.367392] Fusion MPT FC Host driver 3.04.04
[ 21.367479] Fusion MPT SAS Host driver 3.04.04
[ 21.367561] Fusion MPT misc device (ioctl) driver 3.04.04
[ 21.367611] mptctl: Registered with Fusion MPT base driver
[ 21.367614] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 21.367617] Fusion MPT LAN driver 3.04.04
[ 21.367765] usbcore: registered new interface driver usblp
[ 21.367768] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 21.367770] Initializing USB Mass Storage driver...
[ 21.367837] usbcore: registered new interface driver usb-storage
[ 21.367840] USB Mass Storage support registered.
[ 21.367889] usbcore: registered new interface driver libusual
[ 21.367892] USB driver libusual lacks resume support.
[ 21.368037] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 21.408423] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.408428] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.413924] parkbd: no such parport
[ 21.414053] PCI driver pcips2 lacks driver specific resume support.
[ 21.414252] mice: PS/2 mouse device common for all mice
[ 21.420780] input: AT Translated Set 2 keyboard as /class/input/input5
[ 21.662042] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 21.694441] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 21.696725] md: linear personality registered for level -1
[ 21.696729] md: raid0 personality registered for level 0
[ 21.696733] md: raid1 personality registered for level 1
[ 21.696737] md: raid10 personality registered for level 10
[ 21.712960] raid6: int64x1 1402 MB/s
[ 21.729953] raid6: int64x2 1710 MB/s
[ 21.746938] raid6: int64x4 1617 MB/s
[ 21.763971] raid6: int64x8 1093 MB/s
[ 21.780911] raid6: sse2x1 2492 MB/s
[ 21.797911] raid6: sse2x2 2582 MB/s
[ 21.814882] raid6: sse2x4 4441 MB/s
[ 21.814884] raid6: using algorithm sse2x4 (4441 MB/s)
[ 21.814887] md: raid6 personality registered for level 6
[ 21.814890] md: raid5 personality registered for level 5
[ 21.814892] md: raid4 personality registered for level 4
[ 21.814895] raid5: automatically using best checksumming function: generic_sse
[ 21.819889] generic_sse: 5556.000 MB/sec
[ 21.819892] raid5: using function: generic_sse (5556.000 MB/sec)
[ 21.819895] md: multipath personality registered for level -4
[ 21.819898] md: faulty personality registered for level -5
[ 21.819999] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 21.820259] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 21.820321] usbcore: registered new interface driver hiddev
[ 21.820325] USB driver hiddev lacks resume support.
[ 21.820386] usbcore: registered new interface driver usbhid
[ 21.820389] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 21.820423] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 21.820485] ALSA device list:
[ 21.820487] No soundcards found.
[ 21.820559] TCP bic registered
[ 21.820570] NET: Registered protocol family 1
[ 21.820574] NET: Registered protocol family 17
[ 21.821412] Suspend v2.2.10
[ 21.821478] Suspend2 Checksumming support registered.
[ 21.821521] Suspend2 Userspace Storage Manager support registered.
[ 21.821563] Suspend2 Basic User Interface support registered.
[ 21.821615] Suspend2 Compressor support registered.
[ 21.821687] Suspend2 Block I/O support registered.
[ 21.821745] Suspend2 Swap Allocator support registered.
[ 21.821787] Suspend2 File Allocator support registered.
[ 21.821795] Suspend2 Userspace UI support registered.
[ 21.822002] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 21.822010] Freeing unused kernel memory: 396k freed
[ 22.028126] ata1: soft resetting port
[ 22.036142] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.037059] ata1.00: configured for UDMA/100
[ 22.037065] ata1: EH complete
[ 22.037128] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 22.037148] sd 0:0:0:0: [sda] Write Protect is off
[ 22.037152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.037180] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.207768] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.208407] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 22.208413] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 22.208563] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 22.208599] ehci_hcd 0000:00:1a.7: debug port 1
[ 22.208605] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 22.208616] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
[ 22.212515] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.212710] Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
[ 22.212722] usb usb1: configuration #1 chosen from 1 choice
[ 22.212789] hub 1-0:1.0: USB hub found
[ 22.212795] hub 1-0:1.0: 4 ports detected
[ 22.225792] Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
[ 22.225898] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 22.226464] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 22.226469] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 22.226601] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 22.226636] ehci_hcd 0000:00:1d.7: debug port 1
[ 22.226654] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 22.226665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504c00
[ 22.230539] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.230767] Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
[ 22.230780] usb usb2: configuration #1 chosen from 1 choice
[ 22.230894] hub 2-0:1.0: USB hub found
[ 22.230901] hub 2-0:1.0: 6 ports detected
[ 22.238895] Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
[ 22.270022] USB Universal Host Controller Interface driver v3.0
[ 22.270142] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.270155] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 22.270159] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 22.270255] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 22.270291] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 22.270491] Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
[ 22.270503] usb usb3: configuration #1 chosen from 1 choice
[ 22.270589] hub 3-0:1.0: USB hub found
[ 22.270596] hub 3-0:1.0: 2 ports detected
[ 22.283739] Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
[ 22.283832] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 22.283840] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 22.283844] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 22.283903] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 22.283934] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 22.284128] Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
[ 22.284138] usb usb4: configuration #1 chosen from 1 choice
[ 22.284247] hub 4-0:1.0: USB hub found
[ 22.284253] hub 4-0:1.0: 2 ports detected
[ 22.292469] Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
[ 22.292560] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 22.292568] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.292572] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.292636] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 22.292665] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 22.292839] Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.
[ 22.292849] usb usb5: configuration #1 chosen from 1 choice
[ 22.292958] hub 5-0:1.0: USB hub found
[ 22.292964] hub 5-0:1.0: 2 ports detected
[ 22.296418] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 22.315379] Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.
[ 22.315467] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 22.315475] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.315479] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.315537] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 22.315567] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 22.315744] Device driver usbdev6.1_ep00 lacks bus and class support for being resumed.
[ 22.315755] usb usb6: configuration #1 chosen from 1 choice
[ 22.315866] hub 6-0:1.0: USB hub found
[ 22.315873] hub 6-0:1.0: 2 ports detected
[ 22.342807] Device driver usbdev2.2_ep00 lacks bus and class support for being resumed.
[ 22.342817] usb 2-4: configuration #1 chosen from 1 choice
[ 22.344599] Device driver usbdev2.2_ep83 lacks bus and class support for being resumed.
[ 22.359740] Device driver usbdev6.1_ep81 lacks bus and class support for being resumed.
[ 22.359829] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.359837] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.359841] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.359903] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 22.359932] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 22.360104] Device driver usbdev7.1_ep00 lacks bus and class support for being resumed.
[ 22.360114] usb usb7: configuration #1 chosen from 1 choice
[ 22.360223] hub 7-0:1.0: USB hub found
[ 22.360231] hub 7-0:1.0: 2 ports detected
[ 22.372124] Device driver usbdev7.1_ep81 lacks bus and class support for being resumed.
[ 22.426982] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 22.451716] sl811: driver sl811-hcd, 19 May 2005
[ 22.580548] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[ 22.580552] Copyright (c) 1999-2006 Intel Corporation.
[ 22.594538] Device driver usbdev4.2_ep00 lacks bus and class support for being resumed.
[ 22.594550] usb 4-1: configuration #1 chosen from 1 choice
[ 22.628348] input: Microsoft Microsoft Wireless Optical Mouse� 1.00 as /class/input/input7
[ 22.628560] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse� 1.00] on usb-0000:00:1a.1-1
[ 22.628638] Device driver usbdev4.2_ep81 lacks bus and class support for being resumed.
[ 23.001771] No storage allocator is currently active. Rechecking whether we can use one.
[ 23.018220] Suspend2: SwapAllocator: Signature found.
[ 23.018225] Suspend2: Resuming enabled.
[ 23.024572] Suspend2: Failed to initialise the lzf compression transform.
[ 23.024808] Suspend2: Normal swapspace found.
[ 23.074159] kjournald starting. Commit interval 5 seconds
[ 23.074169] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.437203] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 26.437234] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 26.437265] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 26.437777] Device driver eth0 lacks bus and class support for being resumed.
[ 26.437802] eth0: RTL8168b/8111b at 0xffffc20000354000, 00:1b:24:67:09:4d, IRQ 17
[ 26.698442] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 0.0.25k
[ 26.698448] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 26.698830] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.698862] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 26.699500] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 26.699808] Device driver 0000:02:00.0 lacks bus and class support for being resumed.
[ 26.935053] sdhci: Secure Digital Host Controller Interface driver
[ 26.935057] sdhci: Copyright(c) Pierre Ossman
[ 27.265499] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 27.265731] Device driver i2c-0 lacks bus and class support for being resumed.
[ 27.274528] sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
[ 27.274555] ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 27.275435] Device driver mmc0 lacks bus and class support for being resumed.
[ 27.275450] mmc0: SDHCI at 0xf8200800 irq 21 DMA
[ 27.281642] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 27.282247] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 27.559811] nvidia: module license 'NVIDIA' taints kernel.
[ 27.656859] iwl4965: Channel 12 [2.4GHz] is Tx only -- skipping.
[ 27.656863] iwl4965: Channel 13 [2.4GHz] is Tx only -- skipping.
[ 27.656866] iwl4965: Channel 14 [2.4GHz] is Tx only -- skipping.
[ 27.656868] iwl4965: Channel 183 [5.2GHz] is Tx only -- skipping.
[ 27.656871] iwl4965: Channel 184 [5.2GHz] is Tx only -- skipping.
[ 27.656873] iwl4965: Channel 185 [5.2GHz] is Tx only -- skipping.
[ 27.656876] iwl4965: Channel 187 [5.2GHz] is Tx only -- skipping.
[ 27.656878] iwl4965: Channel 188 [5.2GHz] is Tx only -- skipping.
[ 27.656880] iwl4965: Channel 189 [5.2GHz] is Tx only -- skipping.
[ 27.656883] iwl4965: Channel 192 [5.2GHz] is Tx only -- skipping.
[ 27.656886] iwl4965: Channel 196 [5.2GHz] is Tx only -- skipping.
[ 27.656889] iwl4965: Channel 7 [5.2GHz] is Tx only -- skipping.
[ 27.656891] iwl4965: Channel 8 [5.2GHz] is Tx only -- skipping.
[ 27.656893] iwl4965: Channel 11 [5.2GHz] is Tx only -- skipping.
[ 27.656896] iwl4965: Channel 12 [5.2GHz] is Tx only -- skipping.
[ 27.656898] iwl4965: Channel 16 [5.2GHz] is Tx only -- skipping.
[ 27.656901] iwl4965: Channel 34 [5.2GHz] is Tx only -- skipping.
[ 27.656903] iwl4965: Channel 38 [5.2GHz] is Tx only -- skipping.
[ 27.656905] iwl4965: Channel 42 [5.2GHz] is Tx only -- skipping.
[ 27.656908] iwl4965: Channel 46 [5.2GHz] is Tx only -- skipping.
[ 27.656910] iwl4965: Channel 100 [5.2GHz] is Tx only -- skipping.
[ 27.656913] iwl4965: Channel 104 [5.2GHz] is Tx only -- skipping.
[ 27.656915] iwl4965: Channel 108 [5.2GHz] is Tx only -- skipping.
[ 27.656918] iwl4965: Channel 112 [5.2GHz] is Tx only -- skipping.
[ 27.656920] iwl4965: Channel 116 [5.2GHz] is Tx only -- skipping.
[ 27.656923] iwl4965: Channel 120 [5.2GHz] is Tx only -- skipping.
[ 27.656925] iwl4965: Channel 124 [5.2GHz] is Tx only -- skipping.
[ 27.656927] iwl4965: Channel 128 [5.2GHz] is Tx only -- skipping.
[ 27.656930] iwl4965: Channel 132 [5.2GHz] is Tx only -- skipping.
[ 27.656932] iwl4965: Channel 136 [5.2GHz] is Tx only -- skipping.
[ 27.656935] iwl4965: Channel 140 [5.2GHz] is Tx only -- skipping.
[ 27.656937] iwl4965: Channel 145 [5.2GHz] is Tx only -- skipping.
[ 27.656940] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 27.657028] Device driver phy0 lacks bus and class support for being resumed.
[ 27.657897] Device driver wmaster0 lacks bus and class support for being resumed.
[ 27.657924] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 27.677912] Device driver wlan0 lacks bus and class support for being resumed.
[ 27.907497] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.907509] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 27.907652] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007
[ 31.660440] EXT3 FS on dm-0, internal journal
[ 31.990556] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 31.990560] vboxdrv: Successfully done.
[ 32.458488] kjournald starting. Commit interval 5 seconds
[ 32.458724] EXT3 FS on sdb1, internal journal
[ 32.458732] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.538509] Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
[ 52.493440] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 52.512490] NFSD: starting 90-second grace period
[ 53.352819] fbsplash: console 1 using theme 'sabayon'
[ 53.360171] fbsplash: switched splash state to 'on' on console 1
[ 53.373344] fbsplash: console 2 using theme 'sabayon'
[ 53.380630] fbsplash: switched splash state to 'on' on console 2
[ 53.391917] fbsplash: console 3 using theme 'sabayon'
[ 53.400365] fbsplash: switched splash state to 'on' on console 3
[ 53.412325] fbsplash: console 4 using theme 'sabayon'
[ 53.419477] fbsplash: switched splash state to 'on' on console 4
[ 53.431384] fbsplash: console 5 using theme 'sabayon'
[ 53.438521] fbsplash: switched splash state to 'on' on console 5
[ 53.447664] fbsplash: console 11 using theme 'sabayon'
[ 53.453812] fbsplash: switched splash state to 'on' on console 11
[ 57.288040] Device driver i2c-1 lacks bus and class support for being resumed.
[ 57.288066] Device driver i2c-2 lacks bus and class support for being resumed.
[ 57.288089] Device driver i2c-3 lacks bus and class support for being resumed.
[ 60.029160] r8169: eth0: link down
[ 66.196212] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 67.199276] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 185.357781] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 186.362755] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 196.515574] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 197.519413] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 264.072501] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 265.074647] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 403.060507] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 404.064066] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 468.950819] iwl4965: REPLY_ADD_STA failed
[ 468.950895] wlan0: Initial auth_alg=0
[ 468.950900] wlan0: authenticate with AP 00:1a:70:87:9f:76
[ 468.952694] wlan0: RX authentication from 00:1a:70:87:9f:76 (alg=0 transaction=2 status=0)
[ 468.952701] wlan0: authenticated
[ 468.952706] wlan0: associate with AP 00:1a:70:87:9f:76
[ 468.955042] wlan0: RX AssocResp from 00:1a:70:87:9f:76 (capab=0x1 status=0 aid=2)
[ 468.955048] wlan0: associated
- UberMan
- Baby Hen
- Posts: 3
- Joined: Mon Sep 10, 2007 6:34
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest