http://forum.sabayon.org/viewtopic.php?f=52&t=21835&p=126959#p126959
but it still doesn't work for me.
My
- Code: Select all
Bus 005 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
has been working perfectly until a few weeks ago when it, after an upgrade (was it from SL 5.3 to 5.4? -not sure!) suddenly stopped communicating. I have tried various remedies in the meantime but no success so far - also the thread above didn''t help. I use the nmapplet - and here, it is impossible to check the Enable Mobile Broadband option.
I don't find anything irregular during boot
- Code: Select all
augeatur rainer # dmesg | grep "usb 5-1"
[ 8.259044] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 8.406638] usb 5-1: New USB device found, idVendor=12d1, idProduct=1003
[ 8.406644] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.406649] usb 5-1: Product: HUAWEI Mobile
[ 8.406653] usb 5-1: Manufacturer: HUAWEI Technologies
[ 22.533405] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 22.533655] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1
I wouldn't know where else to look. Maybe there is new group membership requirement?
What is between my UMTS stick and access to the network?
Thanks for any hint,
Rainer