Vodafone HUAWEI K3715 "HSPA USB Stick"

[the_surfer]

Hallo everybody.
I've installed Sabayon 5 on my notebook and i've a problem with internet connection

I've try this package:

1)https://forge.betavine.net/frs/download.php/269/vodafone-mobile-connect-card-driver-for-linux-2.0.beta3-ALL-i386-installer.run
with these commands:
2)chmod +x vodafone-mobile-connect-card-driver-for-linux-2.0.beta3-ALL-i386-installer.run

3)sudo ./vodafone-mobile-connect-card-driver-for-linux-2.0.beta3-ALL-i386-installer.run

When i try to launch the software :nothing!!

I've also try with wvdial with this configuration:

[Dialer Defaults]

Init1 = ATZ

Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Init3 = AT+CGDCONT=1,”IP”,”web.omnitel.it”

Modem = /dev/ttyUSB0

Phone = *99***1#

Idle Seconds = 10000

Auto DNS = 208.67.222.222

Password = vodafone

Modem Type = Analog Modem

Stupid Mode = 1

Compuserve = 0

Baud = 7200000

New PPPD = yes

Dial Command = ATDT

Ask Password = 0

ISDN = 0

Username = vodafone
Auto DNS = on

And this is the answer :

--> WvDial: Internet dialer version 1.60

--> Cannot get information for serial port.

--> Initializing modem.

--> Sending: ATZ

ATZ

OK

--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

OK

--> Sending: AT+CGDCONT=1,”IP”,”web.omnitel.it”

AT+CGDCONT=1,b [1d]IPb [1d],b [1d]web.omnitel.itb [1d]

ERROR

--> Bad init string.

--> Cannot get information for serial port.

--> Initializing modem.

--> Sending: ATZ

ATZ

OK

--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

OK

--> Sending: AT+CGDCONT=1,”IP”,”web.omnitel.it”

AT+CGDCONT=1,b [1d]IPb [1d],b [1d]web.omnitel.itb [1d]

ERROR

--> Bad init string.

--> Cannot get information for serial port.

--> Initializing modem.

--> Sending: ATZ

ATZ

OK

--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

OK

--> Sending: AT+CGDCONT=1,”IP”,”web.omnitel.it”

AT+CGDCONT=1,b [1d]IPb [1d],b [1d]web.omnitel.itb [1d]

ERROR

--> Bad init string.
.

Anyone can help me?
Tnx.

[kandimba]

I managed to install VMC and it runs if I select "root and username" when the installer asks for users with permissions to use the program. But then the program doesn't recognize the pen.
Before using Sabayon I was using Mint and VMC was running fine.

[svantoviit]

I Use Huawei E1752 USB Broadband Stick
- usb was recognized by the system, but only as storage device, not as a modem
- tried to run the software which came with the stick, but it did not worked
- finally get it working with usb_modeswitch
you can find it using portage, but it is better to download it from developers website I think
there you will find the most recent version, latest database of supported devices, instructions for install, use, etc.
http://www.draisberghof.de/usb_modeswitch/

these links are definitely worth to read too:
O2 Broadband E1752 Dongle Working on Ubuntu
Ubuntu 9.10 and mobistar stick