In need of some install advice. [Solved]

[Prime]

Here is my issue, I have 3 1TB drives that I want to setup as a RAID, they are already setup as a RAID for Ubuntu Server but I don't know if Sabayon setup is different. The RAID is setup like so dev/md1 is dev/sda3 /dev/sdb3 /dev/sdc3 RAID5, regular swap setup not in a RAID, and dev/md0 is dev/sda1 /dev/sdb1 /dev/sdc1 RAID1. I will be using the RAID to run my home server which is also my desktop system, I will give all my specs at the end. My server will only be used to run a blog and and some Rails development, after I finish teaching myself Ruby and that is about it. I will be using Bitnami's Drupal and it comes with a typical LAMP stack. If you need anymore info let me know and I will try to find it out for you. I don't have hardware virtualization, which sucks, so that is not an option. Thanks!

System Specs:
Intel Core 2 Quad CPU Q8200 @ 2.33 GHz per processor 64-bit
8 GB RAM
3 1TB Western Digital Caviler Black hard drives that spin at 7200 rpm and all disks have dual processors and are all SATA
Nvidia GeForce GT 120 PCI-E 16x with 1 GB dedicated RAM at 550 MHz

[Thev00d00]

Im pretty sure that your cpu supports hardware virtualisation, maybe its not turned on in the bios?

[edit]
Just checked wikipedia and your chip does support vtx.

As for the install issue it would be prefable to use lvm unless you have a hardware raid chip.

[Prime]

No I ran egrep '(vmx|svm)' /proc/cpuinfo and got back no response and I looked in the BIOS and did not see anything. No worries though I got the RAID up and running the old fashion way by trail and error.