sabayon linux 9 xfce contorno finestre

[Filottete]

Salve a tutti,
ho due pc con sabayon con un problema apparentemente simile:

sabayon 9 32 bit nvidia: dopo l'aggiornamento domenica, si avvia XFCE ma senza bordi alle finestre, senza che funzionino le scorciatoie da tastiera, mancano impostazioni tipo i 4 pannelli nel panel (li posso rimettere ma dopo il riavvio di nuovo ne compare uno solo). Con il comando XFwm 4 --replace, tornano i contorni e più. Al riavvio è di nuovo tutto buggato.

sabayon 9 64 bit ati: dopo l'aggiornamento ha funzionato correttamente (riavviato dopo aggiornamento driver ati), ma poi anche questo si apre senza bordi alle finestre. Funziona il mouse ma non la testiera (quindi niente --replace).

Ho pensato che fosse un problema legato ai nuovi drive ati, ma i due pc hanno schede ati e nvidia.

Switchando su Gnome 3 o fluxbox, funziano tutto normalmente.

Qualche configurazione di xfce andata?

Grazie per l'aiuto

[micia]

Penso che sia probabile qualche problema nelle impostazioni dei driver video.
Potresti farci vedere il risultato dei comandi:

Code: Select all

cat /var/log/Xorg.0.log
glxinfo | grep vendor
glxinfo | grep render
eselect opengl list


[Filottete]

Ecco qui:

Code: Select all

skywalker@skywalker ~ $ cat /var/log/Xorg.0.log
[    25.772]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    25.772] X Protocol Version 11, Revision 0
[    25.772] Build Operating System: Linux 3.2.0-server x86_64 Gentoo
[    25.772] Current Operating System: Linux skywalker 3.4.0-sabayon #1 SMP Wed Jul 18 23:06:31 UTC 2012 x86_64
[    25.772] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-3.4.0-sabayon ro init=/linuxrc splash=silent,theme:sabayon video=vesafb:ywrap,mtrr:3 vga=791 console=tty1 quiet dokeymap keymap=it domdadm resume=swap:/dev/mapper/vg_skywalker-lv_swap real_resume=/dev/mapper/vg_skywalker-lv_swap dolvm root=/dev/mapper/vg_skywalker-lv_root docrypt
[    25.772] Build Date: 18 July 2012  04:50:23PM
[    25.772] 
[    25.772] Current version of pixman: 0.24.4
[    25.772]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    25.772] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.772] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 24 21:19:37 2012
[    25.916] (==) Using config file: "/etc/X11/xorg.conf"
[    25.916] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.916] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.080] (==) ServerLayout "Main Layout"
[    26.080] (**) |-->Screen "Screen 0" (0)
[    26.080] (**) |   |-->Monitor "Generic Monitor"
[    26.100] (**) |   |-->Device "SabayonVga0"
[    26.100] (**) Option "AllowMouseOpenFail" "true"
[    26.100] (==) Automatically adding devices
[    26.100] (==) Automatically enabling devices
[    26.154] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    26.154]    Entry deleted from font path.
[    26.154] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    26.154]    Entry deleted from font path.
[    26.154] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    26.154]    Entry deleted from font path.
[    26.183] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    26.183]    Entry deleted from font path.
[    26.183]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    26.205] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    26.205]    Entry deleted from font path.
[    26.205]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    26.205] (==) FontPath set to:
   /usr/share/fonts/misc/
[    26.205] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    26.205] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.205] (II) Loader magic: 0x7d1ac0
[    26.205] (II) Module ABI versions:
[    26.205]    X.Org ANSI C Emulation: 0.4
[    26.205]    X.Org Video Driver: 12.0
[    26.205]    X.Org XInput driver : 16.0
[    26.205]    X.Org Server Extension : 6.0
[    26.206] (--) PCI:*(0:2:0:0) 1002:68e0:1025:033e rev 0, Mem @ 0xd0000000/268435456, 0xcfee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    26.206] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    26.206] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    26.206] (II) "dbe" will be loaded by default.
[    26.206] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    26.206] (II) "record" will be loaded by default.
[    26.206] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    26.206] (II) "dri2" will be loaded by default.
[    26.206] (II) LoadModule: "extmod"
[    26.279] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    26.343] (II) Module extmod: vendor="X.Org Foundation"
[    26.343]    compiled for 1.12.3, module version = 1.0.0
[    26.343]    Module class: X.Org Server Extension
[    26.343]    ABI class: X.Org Server Extension, version 6.0
[    26.343] (II) Loading extension MIT-SCREEN-SAVER
[    26.343] (II) Loading extension XFree86-VidModeExtension
[    26.343] (II) Loading extension DPMS
[    26.343] (II) Loading extension XVideo
[    26.343] (II) Loading extension XVideo-MotionCompensation
[    26.343] (II) Loading extension X-Resource
[    26.343] (II) LoadModule: "i2c"
[    26.343] (II) Module "i2c" already built-in
[    26.343] (II) LoadModule: "ddc"
[    26.343] (II) Module "ddc" already built-in
[    26.343] (II) LoadModule: "vbe"
[    26.703] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    26.722] (II) Module vbe: vendor="X.Org Foundation"
[    26.722]    compiled for 1.12.3, module version = 1.1.0
[    26.722]    ABI class: X.Org Video Driver, version 12.0
[    26.722] (II) LoadModule: "dri"
[    26.723] (WW) Warning, couldn't open module dri
[    26.723] (II) UnloadModule: "dri"
[    26.723] (II) Unloading dri
[    26.723] (EE) Failed to load module "dri" (module does not exist, 0)
[    26.723] (II) LoadModule: "glx"
[    26.723] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    26.752] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    26.752]    compiled for 6.9.0, module version = 1.0.0
[    26.752] (II) Loading extension GLX
[    26.752] (II) LoadModule: "synaptics"
[    26.752] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    26.840] (II) Module synaptics: vendor="X.Org Foundation"
[    26.840]    compiled for 1.12.2, module version = 1.6.2
[    26.840]    Module class: X.Org XInput Driver
[    26.840]    ABI class: X.Org XInput driver, version 16.0
[    26.840] (II) LoadModule: "dbe"
[    26.840] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    26.871] (II) Module dbe: vendor="X.Org Foundation"
[    26.871]    compiled for 1.12.3, module version = 1.0.0
[    26.871]    Module class: X.Org Server Extension
[    26.871]    ABI class: X.Org Server Extension, version 6.0
[    26.871] (II) Loading extension DOUBLE-BUFFER
[    26.871] (II) LoadModule: "record"
[    26.871] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    26.892] (II) Module record: vendor="X.Org Foundation"
[    26.892]    compiled for 1.12.3, module version = 1.13.0
[    26.892]    Module class: X.Org Server Extension
[    26.892]    ABI class: X.Org Server Extension, version 6.0
[    26.892] (II) Loading extension RECORD
[    26.892] (II) LoadModule: "dri2"
[    26.892] (WW) Warning, couldn't open module dri2
[    26.892] (II) UnloadModule: "dri2"
[    26.892] (II) Unloading dri2
[    26.892] (EE) Failed to load module "dri2" (module does not exist, 0)
[    26.892] (II) LoadModule: "fglrx"
[    26.893] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[    27.877] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    27.877]    compiled for 1.4.99.906, module version = 8.98.2
[    27.877]    Module class: X.Org Video Driver
[    27.877] (II) Loading sub module "fglrxdrm"
[    27.877] (II) LoadModule: "fglrxdrm"
[    27.877] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    27.928] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    27.928]    compiled for 1.4.99.906, module version = 8.98.2
[    27.928] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[    27.928] (II) AMD Proprietary Linux Driver Release Identifier: 8.98                                 
[    27.928] (II) AMD Proprietary Linux Driver Build Date: Jun 11 2012 11:57:59
[    27.928] (++) using VT number 7

[    27.957] (WW) Falling back to old probe method for fglrx
[    28.208] (II) Loading PCS database from /etc/ati/amdpcsdb
[    28.234] (--) Assigning device section with no busID to primary device
[    28.234] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[    28.260] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[    28.288] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    28.289] (II) AMD Video driver is signed
[    28.289] (II) fglrx(0): pEnt->device->identifier=0x1f83ea0
[    28.289] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    28.289] (II) Loading sub module "vgahw"
[    28.289] (II) LoadModule: "vgahw"
[    28.290] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[    28.311] (II) Module vgahw: vendor="X.Org Foundation"
[    28.311]    compiled for 1.12.3, module version = 0.1.0
[    28.311]    ABI class: X.Org Video Driver, version 12.0
[    28.311] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    28.311] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    28.311] (==) fglrx(0): Default visual is TrueColor
[    28.312] (==) fglrx(0): RGB weight 888
[    28.312] (II) fglrx(0): Using 8 bits per RGB
[    28.312] (==) fglrx(0): Buffer Tiling is ON
[    28.334] (II) Loading sub module "fglrxdrm"
[    28.334] (II) LoadModule: "fglrxdrm"
[    28.334] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    28.334] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    28.334]    compiled for 1.4.99.906, module version = 8.98.2
[    28.336] ukiDynamicMajor: found major device number 243
[    28.336] ukiDynamicMajor: found major device number 243
[    28.336] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    28.336] ukiOpenDevice: node name is /dev/ati/card0
[    28.336] ukiOpenDevice: open result is 14, (OK)
[    28.336] ukiOpenByBusid: ukiOpenMinor returns 14
[    28.336] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    28.336] (**) fglrx(0): NoAccel = NO
[    28.336] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    28.337] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5400 Series " (Chipset = 0x68e0)
[    28.337] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x033e)
[    28.337] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    28.337] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    28.337] (--) fglrx(0): MMIO registers at 0xcfee0000
[    28.337] (--) fglrx(0): I/O port at 0x00002000
[    28.337] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    28.365] (II) fglrx(0): AC Adapter is used
[    28.429] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    28.450] (II) Loading sub module "vbe"
[    28.450] (II) LoadModule: "vbe"
[    28.450] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    28.450] (II) Module vbe: vendor="X.Org Foundation"
[    28.450]    compiled for 1.12.3, module version = 1.1.0
[    28.450]    ABI class: X.Org Video Driver, version 12.0
[    28.484] (II) fglrx(0): VESA BIOS detected
[    28.484] (II) fglrx(0): VESA VBE Version 3.0
[    28.484] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    28.484] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    28.484] (II) fglrx(0): VESA VBE OEM Software Rev: 12.15
[    28.484] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[    28.484] (II) fglrx(0): VESA VBE OEM Product: PARK
[    28.484] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    28.521] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    28.521] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    28.521] (II) fglrx(0): PCIE card detected
[    28.521] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    28.521] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    28.544] (II) fglrx(0): Using adapter: 2:0.0.
[    28.588] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    29.341] (II) fglrx(0): Interrupt handler installed at IRQ 45.
[    29.342] (II) fglrx(0): RandR 1.2 support is enabled!
[    29.342] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    29.342] (==) fglrx(0): Center Mode is disabled
[    29.342] (II) Loading sub module "fb"
[    29.342] (II) LoadModule: "fb"
[    29.342] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    29.494] (II) Module fb: vendor="X.Org Foundation"
[    29.494]    compiled for 1.12.3, module version = 1.0.0
[    29.494]    ABI class: X.Org ANSI C Emulation, version 0.4
[    29.494] (II) Loading sub module "ddc"
[    29.494] (II) LoadModule: "ddc"
[    29.494] (II) Module "ddc" already built-in
[    30.234] (II) fglrx(0): Finished Initialize PPLIB!
[    30.252] (II) fglrx(0): Output LVDS using monitor section Generic Monitor
[    30.252] (II) fglrx(0): Output DFP1 has no monitor section
[    30.252] (II) fglrx(0): Output CRT1 has no monitor section
[    30.252] (II) Loading sub module "ddc"
[    30.252] (II) LoadModule: "ddc"
[    30.252] (II) Module "ddc" already built-in
[    30.252] (II) fglrx(0): Connected Display0: LVDS
[    30.252] (II) fglrx(0): Display0 EDID data ---------------------------
[    30.252] (II) fglrx(0): Manufacturer: SEC  Model: 4141  Serial#: 0
[    30.252] (II) fglrx(0): Year: 2009  Week: 0
[    30.252] (II) fglrx(0): EDID Version: 1.3
[    30.252] (II) fglrx(0): Digital Display Input
[    30.252] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    30.252] (II) fglrx(0): Gamma: 2.20
[    30.252] (II) fglrx(0): No DPMS capabilities specified
[    30.252] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    30.252] (II) fglrx(0): First detailed timing is preferred mode
[    30.252] (II) fglrx(0): redX: 0.615 redY: 0.355   greenX: 0.335 greenY: 0.610
[    30.252] (II) fglrx(0): blueX: 0.150 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
[    30.252] (II) fglrx(0): Manufacturer's mask: 0
[    30.252] (II) fglrx(0): Supported detailed timing:
[    30.252] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 193 mm
[    30.252] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    30.252] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    30.252] (II) fglrx(0): Unknown vendor-specific block f
[    30.252] (II) fglrx(0):  SAMSUNG
[    30.252] (II) fglrx(0):  156AT02-A02
[    30.252] (II) fglrx(0): EDID (in hex):
[    30.252] (II) fglrx(0):    00ffffffffffff004ca3414100000000
[    30.252] (II) fglrx(0):    00130103802213780a8da59d5b559c26
[    30.252] (II) fglrx(0):    19505400000001010101010101010101
[    30.252] (II) fglrx(0):    010101010101411c56a0500016303020
[    30.252] (II) fglrx(0):    250058c1100000190000000f00000000
[    30.252] (II) fglrx(0):    00000000001eb4027400000000fe0053
[    30.252] (II) fglrx(0):    414d53554e470a2020202020000000fe
[    30.252] (II) fglrx(0):    00313536415430322d4130320a2000f1
[    30.252] (II) fglrx(0): End of Display0 EDID data --------------------
[    30.253] (II) fglrx(0): EDID for output LVDS
[    30.253] (II) fglrx(0): Manufacturer: SEC  Model: 4141  Serial#: 0
[    30.253] (II) fglrx(0): Year: 2009  Week: 0
[    30.253] (II) fglrx(0): EDID Version: 1.3
[    30.253] (II) fglrx(0): Digital Display Input
[    30.253] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    30.253] (II) fglrx(0): Gamma: 2.20
[    30.253] (II) fglrx(0): No DPMS capabilities specified
[    30.253] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    30.253] (II) fglrx(0): First detailed timing is preferred mode
[    30.253] (II) fglrx(0): redX: 0.615 redY: 0.355   greenX: 0.335 greenY: 0.610
[    30.253] (II) fglrx(0): blueX: 0.150 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
[    30.253] (II) fglrx(0): Manufacturer's mask: 0
[    30.253] (II) fglrx(0): Supported detailed timing:
[    30.253] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 193 mm
[    30.253] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    30.253] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    30.253] (II) fglrx(0): Unknown vendor-specific block f
[    30.253] (II) fglrx(0):  SAMSUNG
[    30.253] (II) fglrx(0):  156AT02-A02
[    30.253] (II) fglrx(0): EDID (in hex):
[    30.253] (II) fglrx(0):    00ffffffffffff004ca3414100000000
[    30.253] (II) fglrx(0):    00130103802213780a8da59d5b559c26
[    30.253] (II) fglrx(0):    19505400000001010101010101010101
[    30.253] (II) fglrx(0):    010101010101411c56a0500016303020
[    30.253] (II) fglrx(0):    250058c1100000190000000f00000000
[    30.253] (II) fglrx(0):    00000000001eb4027400000000fe0053
[    30.253] (II) fglrx(0):    414d53554e470a2020202020000000fe
[    30.253] (II) fglrx(0):    00313536415430322d4130320a2000f1
[    30.253] (II) fglrx(0): EDID vendor "SEC", prod id 16705
[    30.253] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.253] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    30.254] (II) fglrx(0): Printing probed modes for output LVDS
[    30.254] (II) fglrx(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "1360x768"x60.0   72.33  1360 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "1280x768"x60.0   72.33  1280 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "1280x720"x60.0   72.33  1280 1414 1446 1526  720 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "1024x768"x60.0   72.33  1024 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "1024x600"x60.0   72.33  1024 1414 1446 1526  600 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "800x600"x60.0   72.33  800 1414 1446 1526  600 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "800x480"x60.0   72.33  800 1414 1446 1526  480 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): Modeline "640x480"x60.0   72.33  640 1414 1446 1526  480 770 775 790 -hsync -vsync (47.4 kHz)
[    30.254] (II) fglrx(0): EDID for output DFP1
[    30.254] (II) fglrx(0): EDID for output CRT1
[    30.254] (II) fglrx(0): Output LVDS connected
[    30.254] (II) fglrx(0): Output DFP1 disconnected
[    30.254] (II) fglrx(0): Output CRT1 disconnected
[    30.254] (II) fglrx(0): Using exact sizes for initial modes
[    30.254] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    30.254] (II) fglrx(0): Display dimensions: (340, 190) mm
[    30.254] (II) fglrx(0): DPI set to (102, 102)
[    30.254] (II) fglrx(0): Eyefinity capable adapter detected.
[    30.254] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5400 Series  has 4 configurable heads and 1 displays connected.
[    30.254] (==) fglrx(0):  PseudoColor visuals disabled
[    30.254] (II) Loading sub module "ramdac"
[    30.254] (II) LoadModule: "ramdac"
[    30.254] (II) Module "ramdac" already built-in
[    30.254] (==) fglrx(0): NoDRI = NO
[    30.254] (==) fglrx(0): Capabilities: 0x00000000
[    30.254] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    30.254] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    30.254] (==) fglrx(0): UseFastTLS=0
[    30.254] (--) Depth 24 pixmap format is 32 bpp
[    30.256] (II) Loading extension ATIFGLRXDRI
[    30.256] (II) fglrx(0): doing swlDriScreenInit
[    30.256] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    30.256] ukiDynamicMajor: found major device number 243
[    30.256] ukiDynamicMajor: found major device number 243
[    30.256] ukiDynamicMajor: found major device number 243
[    30.256] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    30.256] ukiOpenDevice: node name is /dev/ati/card0
[    30.256] ukiOpenDevice: open result is 15, (OK)
[    30.256] ukiOpenByBusid: ukiOpenMinor returns 15
[    30.256] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    30.256] (II) fglrx(0): [uki] DRM interface version 1.0
[    30.256] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[    30.256] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    30.256] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f73e8cb6000
[    30.256] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    30.256] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    30.256] (II) fglrx(0): swlDriScreenInit done
[    30.256] (II) fglrx(0): Kernel Module Version Information:
[    30.256] (II) fglrx(0):     Name: fglrx
[    30.256] (II) fglrx(0):     Version: 8.98.2
[    30.256] (II) fglrx(0):     Date: Jun 11 2012
[    30.256] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    30.256] (II) fglrx(0): Kernel Module version matches driver.
[    30.256] (II) fglrx(0): Kernel Module Build Time Information:
[    30.256] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.4.0-sabayon
[    30.256] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    30.256] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    30.256] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    30.257] (II) fglrx(0): [uki] register handle = 0x00004000
[    30.364] (II) fglrx(0): DRI initialization successfull
[    30.386] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    30.447] (==) fglrx(0): Backing store disabled
[    30.447] (II) Loading extension FGLRXEXTENSION
[    30.447] (==) fglrx(0): DPMS enabled
[    30.447] (II) fglrx(0): Initialized in-driver Xinerama extension
[    30.447] (**) fglrx(0): Textured Video is enabled.
[    30.447] (II) LoadModule: "glesx"
[    30.447] (II) Loading /usr/lib64/xorg/modules/glesx.so
[    31.059] (II) Module glesx: vendor="X.Org Foundation"
[    31.059]    compiled for 1.4.99.906, module version = 1.0.0
[    31.059] (II) Loading extension GLESX
[    31.059] (II) fglrx(0): GLESX enableFlags = 592
[    31.100] (II) fglrx(0): GLESX is enabled
[    31.100] (II) LoadModule: "amdxmm"
[    31.100] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[    31.200] (II) Module amdxmm: vendor="X.Org Foundation"
[    31.200]    compiled for 1.4.99.906, module version = 2.0.0
[    31.209] (II) Loading extension AMDXVOPL
[    31.209] (II) Loading extension AMDXVBA
[    31.285] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    31.288] (II) fglrx(0): Enable composite support successfully
[    31.288] (WW) fglrx(0): Option "LogoPath" is not used
[    31.288] (II) fglrx(0): X context handle = 0x1
[    31.288] (II) fglrx(0): [DRI] installation complete
[    31.289] (==) fglrx(0): Silken mouse enabled
[    31.289] (==) fglrx(0): Using HW cursor of display infrastructure!
[    31.290] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    31.290] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    31.290] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    31.764] (--) RandR disabled
[    31.764] (II) Initializing built-in extension Generic Event Extension
[    31.764] (II) Initializing built-in extension SHAPE
[    31.764] (II) Initializing built-in extension MIT-SHM
[    31.764] (II) Initializing built-in extension XInputExtension
[    31.764] (II) Initializing built-in extension XTEST
[    31.764] (II) Initializing built-in extension BIG-REQUESTS
[    31.764] (II) Initializing built-in extension SYNC
[    31.764] (II) Initializing built-in extension XKEYBOARD
[    31.764] (II) Initializing built-in extension XC-MISC
[    31.764] (II) Initializing built-in extension XINERAMA
[    31.764] (II) Initializing built-in extension XFIXES
[    31.764] (II) Initializing built-in extension RENDER
[    31.764] (II) Initializing built-in extension RANDR
[    31.764] (II) Initializing built-in extension COMPOSITE
[    31.764] (II) Initializing built-in extension DAMAGE
[    31.897] ukiDynamicMajor: found major device number 243
[    31.897] ukiDynamicMajor: found major device number 243
[    31.897] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    31.897] ukiOpenDevice: node name is /dev/ati/card0
[    31.897] ukiOpenDevice: open result is 17, (OK)
[    31.897] ukiOpenByBusid: ukiOpenMinor returns 17
[    31.897] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    33.151] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    33.151] (II) fglrx(0): Enable the clock gating!
[    33.151] (II) fglrx(0): Setting screen physical size to 361 x 203
[    33.982] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    33.982] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.982] (**) Power Button: Applying InputClass "keyboard"
[    33.982] (II) LoadModule: "evdev"
[    33.982] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    33.994] (II) Module evdev: vendor="X.Org Foundation"
[    33.994]    compiled for 1.12.2, module version = 2.7.0
[    33.994]    Module class: X.Org XInput Driver
[    33.994]    ABI class: X.Org XInput driver, version 16.0
[    33.994] (II) Using input driver 'evdev' for 'Power Button'
[    33.994] (**) Power Button: always reports core events
[    33.994] (**) evdev: Power Button: Device: "/dev/input/event2"
[    33.994] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.994] (--) evdev: Power Button: Found keys
[    33.994] (II) evdev: Power Button: Configuring as keyboard
[    33.994] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    33.994] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.994] (**) Option "xkb_rules" "evdev"
[    33.994] (**) Option "xkb_model" "evdev"
[    33.994] (**) Option "xkb_layout" "it"
[    33.994] (WW) Option "xkb_variant" requires an string value
[    33.994] (WW) Option "XkbVariant" requires an string value
[    33.994] (WW) Option "xkb_options" requires an string value
[    33.994] (WW) Option "XkbOptions" requires an string value
[    34.123] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    34.123] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.123] (**) Video Bus: Applying InputClass "keyboard"
[    34.123] (II) Using input driver 'evdev' for 'Video Bus'
[    34.123] (**) Video Bus: always reports core events
[    34.123] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    34.123] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    34.123] (--) evdev: Video Bus: Found keys
[    34.123] (II) evdev: Video Bus: Configuring as keyboard
[    34.123] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[    34.123] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    34.124] (**) Option "xkb_rules" "evdev"
[    34.124] (**) Option "xkb_model" "evdev"
[    34.124] (**) Option "xkb_layout" "it"
[    34.124] (WW) Option "xkb_variant" requires an string value
[    34.124] (WW) Option "XkbVariant" requires an string value
[    34.124] (WW) Option "xkb_options" requires an string value
[    34.124] (WW) Option "XkbOptions" requires an string value
[    34.125] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    34.125] (II) No input driver specified, ignoring this device.
[    34.125] (II) This device may have been added with another device file.
[    34.125] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    34.125] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    34.125] (**) Sleep Button: Applying InputClass "keyboard"
[    34.125] (II) Using input driver 'evdev' for 'Sleep Button'
[    34.125] (**) Sleep Button: always reports core events
[    34.125] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    34.125] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    34.125] (--) evdev: Sleep Button: Found keys
[    34.125] (II) evdev: Sleep Button: Configuring as keyboard
[    34.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    34.125] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    34.125] (**) Option "xkb_rules" "evdev"
[    34.125] (**) Option "xkb_model" "evdev"
[    34.125] (**) Option "xkb_layout" "it"
[    34.125] (WW) Option "xkb_variant" requires an string value
[    34.125] (WW) Option "XkbVariant" requires an string value
[    34.125] (WW) Option "xkb_options" requires an string value
[    34.125] (WW) Option "XkbOptions" requires an string value
[    34.126] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event12)
[    34.126] (II) No input driver specified, ignoring this device.
[    34.126] (II) This device may have been added with another device file.
[    34.127] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    34.127] (II) No input driver specified, ignoring this device.
[    34.127] (II) This device may have been added with another device file.
[    34.127] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    34.127] (II) No input driver specified, ignoring this device.
[    34.127] (II) This device may have been added with another device file.
[    34.128] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    34.128] (II) No input driver specified, ignoring this device.
[    34.128] (II) This device may have been added with another device file.
[    34.128] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[    34.128] (II) No input driver specified, ignoring this device.
[    34.128] (II) This device may have been added with another device file.
[    34.129] (II) config/udev: Adding input device Video WebCam (/dev/input/event7)
[    34.129] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[    34.129] (**) Video WebCam: Applying InputClass "keyboard"
[    34.129] (II) Using input driver 'evdev' for 'Video WebCam'
[    34.129] (**) Video WebCam: always reports core events
[    34.129] (**) evdev: Video WebCam: Device: "/dev/input/event7"
[    34.129] (--) evdev: Video WebCam: Vendor 0x64e Product 0xa103
[    34.129] (--) evdev: Video WebCam: Found keys
[    34.129] (II) evdev: Video WebCam: Configuring as keyboard
[    34.129] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7/event7"
[    34.129] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD, id 9)
[    34.129] (**) Option "xkb_rules" "evdev"
[    34.129] (**) Option "xkb_model" "evdev"
[    34.129] (**) Option "xkb_layout" "it"
[    34.129] (WW) Option "xkb_variant" requires an string value
[    34.129] (WW) Option "XkbVariant" requires an string value
[    34.129] (WW) Option "xkb_options" requires an string value
[    34.129] (WW) Option "XkbOptions" requires an string value
[    34.130] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    34.130] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.130] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[    34.130] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    34.130] (**) AT Translated Set 2 keyboard: always reports core events
[    34.130] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    34.130] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    34.130] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    34.131] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    34.131] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    34.131] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    34.131] (**) Option "xkb_rules" "evdev"
[    34.131] (**) Option "xkb_model" "evdev"
[    34.131] (**) Option "xkb_layout" "it"
[    34.131] (WW) Option "xkb_variant" requires an string value
[    34.131] (WW) Option "XkbVariant" requires an string value
[    34.131] (WW) Option "xkb_options" requires an string value
[    34.131] (WW) Option "XkbOptions" requires an string value
[    34.132] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[    34.132] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    34.132] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    34.132] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    34.132] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    34.132] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    34.132] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    34.132] (**) Option "Device" "/dev/input/event4"
[    34.171] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    34.171] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5720
[    34.171] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4780
[    34.171] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    34.172] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    34.172] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[    34.172] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    34.172] (**) Option "VertEdgeScroll" "1"
[    34.172] (**) Option "VertTwoFingerScroll" "1"
[    34.172] (**) Option "HorizTwoFingerScroll" "1"
[    34.172] (**) Option "TapButton1" "1"
[    34.172] (**) Option "TapButton2" "2"
[    34.172] (**) Option "TapButton3" "3"
[    34.172] (**) Option "CircularScrolling" "0"
[    34.172] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    34.172] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    34.187] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[    34.187] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    34.187] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    34.187] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    34.187] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    34.187] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    34.187] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    34.187] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    34.187] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    34.187] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    34.188] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    34.188] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    34.188] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    34.188] (II) No input driver specified, ignoring this device.
[    34.188] (II) This device may have been added with another device file.
[    34.196] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    57.910] (II) fglrx(0): EDID vendor "SEC", prod id 16705
[    57.910] (II) fglrx(0): Printing DDC gathered Modelines:
[    57.910] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    69.962] (II) fglrx(0): EDID vendor "SEC", prod id 16705
[    69.962] (II) fglrx(0): Printing DDC gathered Modelines:
[    69.962] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    69.970] (II) fglrx(0): EDID vendor "SEC", prod id 16705
[    69.970] (II) fglrx(0): Printing DDC gathered Modelines:
[    69.970] (II) fglrx(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    78.123] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse1)
[    78.123] (II) No input driver specified, ignoring this device.
[    78.123] (II) This device may have been added with another device file.
[    78.124] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event13)
[    78.124] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[    78.124] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[    78.124] (**) Logitech Optical USB Mouse: always reports core events
[    78.124] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event13"
[    78.124] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
[    78.124] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
[    78.124] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
[    78.124] (--) evdev: Logitech Optical USB Mouse: Found relative axes
[    78.124] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
[    78.124] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
[    78.124] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
[    78.124] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[    78.124] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    78.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input13/event13"
[    78.124] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 12)
[    78.124] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
[    78.124] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[    78.124] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[    78.125] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[    78.125] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
skywalker@skywalker ~ $ 

Poi:

Code: Select all

skywalker@skywalker ~ $ glxinfo | grep vendor
server glx vendor string: ATI
client glx vendor string: ATI
OpenGL vendor string: Advanced Micro Devices, Inc.

Poi:

Code: Select all

glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: ATI Mobility Radeon HD 5400 Series
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,

Code: Select all

skywalker@skywalker ~ $ eselect opengl list
Available OpenGL implementations:
  [1]   ati *
  [2]   nvidia
  [3]   xorg-x11


Pero ora ho risolto semplicemente aggiungendo il comando all'avvio: xfwm4 --replace e tutto funziona correttamente.