Sabayon 3rc2 x86_64 e Ati Radeon Xpress 200M

[ss4]

ciao a tutti:)ho anche io lo stesso problema

portatile hp nx6125,turion 64 e video ati x200

[rky]

Eccomi!

-boot parameters: gentoo xgl opengl=ati xserver=fglrx noacpi
dmesg:

Code: Select all

LE=/dev/tty1 quiet BOOT_IMAGE=/boot/smp noacpi xdriver=fglrx xgl opengl=ati)
[    0.000000] Linux version 2.6.17-reiser4-r1-smp (root@phobos) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Wed Aug 23 09:08:20 UTC 2006
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000017ea0000 (usable)
[    0.000000]  BIOS-e820: 0000000017ea0000 - 0000000017ea5000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000017ea5000 - 0000000017f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000017f00000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f85c0
[    0.000000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0000000017ea0302
[    0.000000] ACPI: FADT (v001 ATI    Piranha  0x06040000 ATI  0x000f4240) @ 0x0000000017ea4e20
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x0000000017ea4e94
[    0.000000] ACPI: MADT (v001 PTLTD      APIC   0x06040000  LTP 0x00000000) @ 0x0000000017ea4f6a
[    0.000000] ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x0000000017ea4fc4
[    0.000000] ACPI: DSDT (v001    ATI    SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000017ea0000
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-0000000017ea0000
[    0.000000] On node 0 totalpages: 94255
[    0.000000]   DMA zone: 1682 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 92573 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ 1808000000 size 32 MB
[    0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[    0.000000] No AGP bridge found
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=/dev/ram0 initrd=/boot/smp.igz init=/linuxrc cdroot doslowusb looptype=squashfs max_loop=64 loop=/livecd.squashfs splash=silent,theme:default vga=791 CONSOLE=/dev/tty1 quiet BOOT_IMAGE=/boot/smp noacpi xdriver=fglrx xgl opengl=ati
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[    0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[    0.000000] time.c: Detected 1790.878 MHz processor.
[  133.290089] Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized
[  133.290106] Console: colour dummy device 80x25
[  133.290822] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[  133.291289] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[  133.297695] Memory: 372436k/391808k available (5034k kernel code, 18980k reserved, 2033k data, 260k init)
[  133.356938] Calibrating delay using timer specific routine.. 3584.04 BogoMIPS (lpj=1792020)
[  133.357001] Security Framework v1.0.0 initialized
[  133.357009] Capability LSM initialized
[  133.357038] Mount-cache hash table entries: 256
[  133.357194] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[  133.357198] CPU: L2 Cache: 1024K (64 bytes/line)
[  133.357201] CPU 0/0(1) -> Node 0 -> Core 0
[  133.377783] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[  133.387785] Using local APIC timer interrupts.
[  133.443550] result 12436658
[  133.443552] Detected 12.436 MHz APIC timer.
[  133.443851] Brought up 1 CPUs
[  133.443887] testing NMI watchdog ... OK.
[  133.454069] migration_cost=0
[  133.454173] checking if image is initramfs... it is
[  133.678776] Freeing initrd memory: 3719k freed
[  133.679289] NET: Registered protocol family 16
[  133.679320] ACPI: bus type pci registered
[  133.684556] PCI: Using MMCONFIG at e0000000
[  133.684599] PCI: No mmconfig possible on device 0:18
[  133.685589] ACPI: Subsystem revision 20060127
[  133.685905] GSI 21 sharing vector 0xA9 and IRQ 21
[  133.691552] ACPI: Interpreter enabled
[  133.691555] ACPI: Using IOAPIC for interrupt routing
[  133.691995] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  133.691998] PCI: Probing PCI hardware (bus 00)
[  133.694308] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[  133.694637] Boot video device is 0000:01:05.0
[  133.695237] PCI: Transparent bridge - 0000:00:14.4
[  133.695309] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
[  133.695312] Please report the result to linux-kernel to fix this permanently
[  133.695342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  133.698667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[  133.699709] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[  133.699933] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[  133.700157] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[  133.700383] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[  133.700617] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[  133.700842] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[  133.701071] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[  133.701297] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[  133.702096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[  133.702424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[  133.702836] ACPI: Embedded Controller [EC] (gpe 16) interrupt mode.
[  133.702957] Linux Plug and Play Support v0.97 (c) Adam Belay
[  133.702966] pnp: PnP ACPI init
[  133.705421] pnp: PnP ACPI: found 10 devices
[  133.705595] SCSI subsystem initialized
[  133.705644] usbcore: registered new driver usbfs
[  133.705677] usbcore: registered new driver hub
[  133.705713] PCI: Using ACPI for IRQ routing
[  133.705717] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  133.705808] TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
[  133.705854] PCI-DMA: Disabling IOMMU.
[  133.706269] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[  133.706273] pnp: 00:08: ioport range 0x200-0x20f has been reserved
[  133.706305] PCI: Bridge: 0000:00:01.0
[  133.706307]   IO window: 2000-2fff
[  133.706311]   MEM window: c0100000-c01fffff
[  133.706314]   PREFETCH window: c8000000-cfffffff
[  133.706318] PCI: Bridge: 0000:00:06.0
[  133.706320]   IO window: 3000-3fff
[  133.706323]   MEM window: c0200000-c02fffff
[  133.706327]   PREFETCH window: 32000000-320fffff
[  133.706332] PCI: Bus 4, cardbus bridge: 0000:03:07.0
[  133.706335]   IO window: 00004000-000040ff
[  133.706341]   IO window: 00004400-000044ff
[  133.706347]   PREFETCH window: 30000000-31ffffff
[  133.706353]   MEM window: 34000000-35ffffff
[  133.706358] PCI: Bridge: 0000:00:14.4
[  133.706362]   IO window: 4000-4fff
[  133.706369]   MEM window: c0300000-c03fffff
[  133.706374]   PREFETCH window: 30000000-31ffffff
[  133.706393] PCI: Setting latency timer of device 0000:00:06.0 to 64
[  133.706418] GSI 16 sharing vector 0xB1 and IRQ 16
[  133.706421] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 20 (level, low) -> IRQ 16
[  133.706481] NET: Registered protocol family 2
[  133.715504] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[  133.715648] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[  133.715961] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[  133.716124] TCP: Hash tables configured (established 16384 bind 8192)
[  133.716127] TCP reno registered
[  133.716436] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[  133.718306] audit: initializing netlink socket (disabled)
[  133.718318] audit(1157842913.428:1): initialized
[  133.718372] Total HugeTLB memory allocated, 0
[  133.718510] VFS: Disk quotas dquot_6.5.1
[  133.718535] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  133.718565] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[  133.718701] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[  133.718798] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  133.719064] NTFS driver 2.1.27 [Flags: R/W].
[  133.719107] fuse init (API version 7.6)
[  133.719205] JFS: nTxBlock = 2938, nTxLock = 23509
[  133.722011] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[  133.722201] SGI XFS Quota Management subsystem
[  133.722242] Initializing Cryptographic API
[  133.722248] io scheduler noop registered
[  133.722257] io scheduler anticipatory registered
[  133.722266] io scheduler deadline registered
[  133.722288] io scheduler cfq registered (default)
[  134.374036] PCI: Setting latency timer of device 0000:00:06.0 to 64
[  134.374042] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[  134.374059] assign_interrupt_mode Found MSI capability
[  134.374063] Allocate Port Service[0000:00:06.0:pcie00]
[  134.374100] Allocate Port Service[0000:00:06.0:pcie01]
[  134.374136] Allocate Port Service[0000:00:06.0:pcie03]
[  134.395967] Real Time Clock Driver v1.12ac
[  134.395994] initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
[  134.396016] Linux agpgart interface v0.101 (c) Dave Jones
[  134.396102] vesafb: framebuffer at 0xc8000000, mapped to 0xffffc20010300000, using 3072k, total 131072k
[  134.396106] vesafb: mode is 1024x768x16, linelength=2048, pages=84
[  134.396109] vesafb: scrolling: redraw
[  134.396112] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[  134.487225] Console: switching to colour frame buffer device 128x48
[  134.488642] fbsplash: console 0 using theme 'default'
[  134.922113] fbsplash: switched splash state to 'on' on console 0
[  134.922529] fb0: VESA VGA frame buffer device
[  134.922844] ACPI: AC Adapter [AC] (on-line)
[  134.923049] ACPI: Battery Slot [BAT0] (battery absent)
[  134.923066] ACPI: Power Button (FF) [PWRF]
[  134.923071] ACPI: Power Button (CM) [PWRB]
[  134.923080] ACPI: Sleep Button (CM) [SLPB]
[  134.923090] ACPI: Lid Switch [LID]
[  134.923161] Using specific hotkey driver
[  134.923223] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[  134.923228] ACPI: Processor [CPU0] (supports 8 throttling states)
[  134.925570] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  134.926147] GSI 17 sharing vector 0xB9 and IRQ 17
[  134.926151] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[  134.926236] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[  134.928725] serio: i8042 AUX port at 0x60,0x64 irq 12
[  134.928793] serio: i8042 KBD port at 0x60,0x64 irq 1
[  134.928971] mice: PS/2 mouse device common for all mice
[  134.929165] mk712: device not present
[  134.956622] input: AT Translated Set 2 keyboard as /class/input/input0
[  135.544360] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
[  135.583537] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[  137.934823] floppy0: no floppy controllers found
[  137.935299] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[  137.937429] loop: loaded (max 64 devices)
[  137.937432] Compaq SMART2 Driver (v 2.6.0)
[  137.937475] HP CISS Driver (v 2.6.10)
[  137.937865] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  137.937870] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  137.937929] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[  137.937948] GSI 18 sharing vector 0xC1 and IRQ 18
[  137.937952] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[  137.937962] ATIIXP: chipset revision 128
[  137.937964] ATIIXP: not 100% native mode: will probe irqs later
[  137.937974]     ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
[  137.937990]     ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
[  137.938000] Probing IDE interface ide0...
[  138.201829] hda: FUJITSU MHV2080AT PL, ATA DISK drive
[  138.816005] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[  138.816064] Probing IDE interface ide1...
[  139.486825] hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
[  139.792352] ide1 at 0x170-0x177,0x376 on irq 15
[  139.793321] hda: max request size: 128KiB
[  139.865632] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[  139.870314] hda: cache flushes supported
[  139.870345]  hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[  139.911168] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[  139.911175] Uniform CD-ROM driver Revision: 3.20
[  141.522662] Adaptec aacraid driver (1.1-5[2409]-mh1)
[  141.522774] Emulex LightPulse Fibre Channel SCSI driver 8.1.6
[  141.522777] Copyright(c) 2004-2006 Emulex.  All rights reserved.
[  141.522922] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
[  141.522927] megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
[  141.522957] megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
[  141.523022] GDT-HA: Storage RAID Controller Driver. Version: 3.04
[  141.523099] GDT-HA: Found 0 PCI Storage RAID Controllers
[  141.523122] 3ware Storage Controller device driver for Linux v1.26.02.001.
[  141.523154] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[  141.523186] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[  141.523237] libata version 1.20 loaded.
[  141.523662] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[  141.523695] osst :I: Tape driver with OnStream support version 0.99.4
[  141.523697] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[  141.523797] SCSI Media Changer driver v0.25
[  141.523826] I2O subsystem v1.325
[  141.523830] i2o: max drivers = 8
[  141.523913] I2O Configuration OSM v1.323
[  141.523966] I2O Bus Adapter OSM v1.317
[  141.523994] I2O Block Device OSM v1.325
[  141.524074] I2O SCSI Peripheral OSM v1.316
[  141.524097] I2O ProcFS OSM v1.316
[  141.524123] Fusion MPT base driver 3.03.09
[  141.524125] Copyright (c) 1999-2005 LSI Logic Corporation
[  141.524130] Fusion MPT SPI Host driver 3.03.09
[  141.524166] Fusion MPT FC Host driver 3.03.09
[  141.524207] Fusion MPT SAS Host driver 3.03.09
[  141.524249] Fusion MPT misc device (ioctl) driver 3.03.09
[  141.524282] mptctl: Registered with Fusion MPT base driver
[  141.524285] mptctl: /dev/mptctl @ (major,minor=10,220)
[  141.524287] usbmon: debugfs is not available
[  141.524290] Initializing USB Mass Storage driver...
[  141.524317] usbcore: registered new driver usb-storage
[  141.524320] USB Mass Storage support registered.
[  141.524344] usbcore: registered new driver libusual
[  141.524370] usbcore: registered new driver hiddev
[  141.524394] usbcore: registered new driver usbhid
[  141.524398] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[  141.524417] md: linear personality registered for level -1
[  141.524419] md: raid0 personality registered for level 0
[  141.524422] md: raid1 personality registered for level 1
[  141.524425] md: raid10 personality registered for level 10
[  141.524428] md: raid5 personality registered for level 5
[  141.524430] md: raid4 personality registered for level 4
[  141.524433] raid5: automatically using best checksumming function: generic_sse
[  141.529192]    generic_sse:  5468.000 MB/sec
[  141.529195] raid5: using function: generic_sse (5468.000 MB/sec)
[  141.546166] raid6: int64x1   1632 MB/s
[  141.563159] raid6: int64x2   2066 MB/s
[  141.580139] raid6: int64x4   2011 MB/s
[  141.597123] raid6: int64x8   1445 MB/s
[  141.614068] raid6: sse2x1    2167 MB/s
[  141.631039] raid6: sse2x2    3003 MB/s
[  141.648016] raid6: sse2x4    3234 MB/s
[  141.648018] raid6: using algorithm sse2x4 (3234 MB/s)
[  141.648021] md: raid6 personality registered for level 6
[  141.648024] md: multipath personality registered for level -4
[  141.648027] md: faulty personality registered for level -5
[  141.648030] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[  141.648032] md: bitmap version 4.39
[  141.648117] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[  141.648282] Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
[  141.648285] ALSA device list:
[  141.648287]   No soundcards found.
[  141.648361] TCP bic registered
[  141.648363] Initializing IPsec netlink socket
[  141.648375] NET: Registered protocol family 1
[  141.648415] NET: Registered protocol family 10
[  141.648508] lo: Disabled Privacy Extensions
[  141.648571] IPv6 over IPv4 tunneling driver
[  141.648649] NET: Registered protocol family 17
[  141.648653] NET: Registered protocol family 15
[  141.648754] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[  141.648797] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[  141.648801] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
[  141.648804] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[  141.648809] cpu_init done, current fid 0xa, vid 0xa
[  141.648899] ACPI wakeup devices:
[  141.648902] SLPB  LID  PB6 MODM
[  141.648906] ACPI: (supports S0 S3 S4 S5)
[  141.648937] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[  141.649281] Freeing unused kernel memory: 260k freed
[  142.090246] GSI 19 sharing vector 0xC9 and IRQ 19
[  142.090251] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[  142.090681] ehci_hcd 0000:00:13.2: EHCI Host Controller
[  142.090813] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[  142.090880] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
[  142.090892] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[  142.090992] usb usb1: configuration #1 chosen from 1 choice
[  142.091033] hub 1-0:1.0: USB hub found
[  142.091042] hub 1-0:1.0: 8 ports detected
[  142.219588] USB Universal Host Controller Interface driver v3.0
[  142.239273] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[  142.239338] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[  142.239741] ohci_hcd 0000:00:13.0: OHCI Host Controller
[  142.239865] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[  142.239887] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
[  142.290122] usb usb2: configuration #1 chosen from 1 choice
[  142.290163] hub 2-0:1.0: USB hub found
[  142.290175] hub 2-0:1.0: 4 ports detected
[  142.390930] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[  142.391081] ohci_hcd 0000:00:13.1: OHCI Host Controller
[  142.391198] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[  142.391221] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
[  142.441872] usb usb3: configuration #1 chosen from 1 choice
[  142.441910] hub 3-0:1.0: USB hub found
[  142.441922] hub 3-0:1.0: 4 ports detected
[  142.565462] sl811: driver sl811-hcd, 19 May 2005
[  142.592201] ieee1394: Initialized config rom entry `ip1394'
[  142.607527] usb 2-2: new low speed USB device using ohci_hcd and address 2
[  142.616222] ACPI: PCI Interrupt 0000:03:07.2[C] -> GSI 21 (level, low) -> IRQ 21
[  142.666559] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[c0309000-c03097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[  142.690731] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[  142.690735] ieee1394: sbp2: Try serialize_io=0 for better performance
[  142.793520] usb 2-2: configuration #1 chosen from 1 choice
[  142.802507] input: Logitech Optical USB Mouse as /class/input/input2
[  142.802540] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2
[  174.227931] attempt to access beyond end of device
[  174.227936] hda4: rw=0, want=66, limit=2
[  174.227940] isofs_fill_super: bread failed, dev=hda4, iso_blknum=16, block=32
[  177.849257] ISO 9660 Extensions: Microsoft Joliet Level 3
[  177.854663] Unable to load NLS charset iso8859-1
[  177.859812] Unable to load NLS charset iso8859-1
[  177.937935] ISO 9660 Extensions: RRIP_1991A
[  225.254067] GSI 20 sharing vector 0xD1 and IRQ 20
[  225.254073] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 20
[  225.254087] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  225.254823] sky2 v1.5 addr 0xc0200000 irq 20 Yukon-EC (0xb6) rev 2
[  225.254961] sky2 eth0: addr 00:03:25:38:8b:4c
[  225.316790] ieee80211_crypt: registered algorithm 'NULL'
[  225.318388] ieee80211: 802.11 data/management/control stack, git-1.1.7
[  225.318391] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[  225.626562] sdhci: Secure Digital Host Controller Interface driver, 0.11
[  225.626567] sdhci: Copyright(c) Pierre Ossman
[  225.626638] ACPI: PCI Interrupt 0000:03:07.4[A] -> GSI 20 (level, low) -> IRQ 16
[  225.729492] mmc0: SDHCI at 0xc030a000 irq 16 PIO
[  225.832237] mmc1: SDHCI at 0xc0309c00 irq 16 PIO
[  225.932814] mmc2: SDHCI at 0xc0309800 irq 16 PIO
[  226.431121] bcm43xx driver
[  226.431267] GSI 22 sharing vector 0xD9 and IRQ 22
[  226.431272] ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 23 (level, low) -> IRQ 22
[  227.044630] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 20 (level, low) -> IRQ 16
[  227.044644] Yenta: CardBus bridge found at 0000:03:07.0 [161f:2043]
[  227.044669] Yenta: Using CSCINT to route CSC interrupts to PCI
[  227.044672] Yenta: Routing CardBus interrupts to PCI
[  227.044679] Yenta TI: socket 0000:03:07.0, mfunc 0x00001b22, devctl 0x44
[  227.549965] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
[  227.549971] Socket status: 30000006
[  227.549975] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[  227.549980] pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
[  227.549983] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[  231.083532] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[  231.607577] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[  232.361753] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  233.033548] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  233.300635] ts: Compaq touchscreen protocol output
[  350.134642] fbsplash: console 1 using theme 'default'
[  350.141145] fbsplash: switched splash state to 'on' on console 1
[  350.154534] fbsplash: console 2 using theme 'default'
[  350.160392] fbsplash: switched splash state to 'on' on console 2
[  350.172249] fbsplash: console 3 using theme 'default'
[  350.178116] fbsplash: switched splash state to 'on' on console 3
[  350.183038] fbsplash: console 4 using theme 'default'
[  350.188855] fbsplash: switched splash state to 'on' on console 4
[  350.193524] fbsplash: console 5 using theme 'default'
[  350.199395] fbsplash: switched splash state to 'on' on console 5
[  350.253014] fbsplash: console 11 using theme 'default'
[  350.258947] fbsplash: switched splash state to 'on' on console 11
[  355.386579] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[  355.390949] [fglrx] Maximum main memory to use for locked dma buffers: 306 MBytes.
[  355.390967] [fglrx] module loaded - fglrx 8.27.10 [Jul 27 2006] on minor 0
[  355.506316] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[  356.824400] Xorg: page allocation failure. order:0, mode:0x1024
[  356.824405]
[  356.824407] Call Trace: <ffffffff8020ed91>{__alloc_pages+651} <ffffffff8026cc3f>{dma_alloc_pages+155}
[  356.824427]        <ffffffff80221752>{dma_alloc_coherent+121} <ffffffff8812f15e>{:fglrx:firegl_alloc_page+222}
[  356.824470]        <ffffffff8812e80a>{:fglrx:firegl_bind_pcie+266} <ffffffff8812e805>{:fglrx:firegl_bind_pcie+261}
[  356.824522]        <ffffffff8812a7b2>{:fglrx:create_buffer_queue+402} <ffffffff881217ff>{:fglrx:firegl_addmap+1087}
[  356.824566]        <ffffffff88129bda>{:fglrx:firegl_alloc_bufs+298} <ffffffff80221603>{__up_read+19}
[  356.824594]        <ffffffff88129ab0>{:fglrx:firegl_alloc_bufs+0} <ffffffff88126385>{:fglrx:firegl_ioctl+437}
[  356.824641]        <ffffffff80241532>{do_ioctl+85} <ffffffff8022f642>{vfs_ioctl+594}
[  356.824651]        <ffffffff80216557>{vfs_write+316} <ffffffff8024c384>{sys_ioctl+89}
[  356.824664]        <ffffffff8025e28e>{system_call+126}
[  356.824675] Mem-info:
[  356.824677] Node 0 DMA per-cpu:
[  356.824680] cpu 0 hot: high 0, batch 1 used:0
[  356.824683] cpu 0 cold: high 0, batch 1 used:0
[  356.824685] Node 0 DMA32 per-cpu:
[  356.824688] cpu 0 hot: high 186, batch 31 used:30
[  356.824691] cpu 0 cold: high 62, batch 15 used:12
[  356.824693] Node 0 Normal per-cpu: empty
[  356.824696] Node 0 HighMem per-cpu: empty
[  356.824700] Free pages:        2296kB (0kB HighMem)
[  356.824705] Active:18237 inactive:52322 dirty:0 writeback:0 unstable:0 free:574 slab:19279 mapped:9413 pagetables:422
[  356.824708] Node 0 DMA free:1460kB min:40kB low:48kB high:60kB active:184kB inactive:0kB present:6728kB pages_scanned:0 all_unreclaimable? no
[  356.824714] lowmem_reserve[]: 0 361 361 361
[  356.824718] Node 0 DMA32 free:836kB min:2412kB low:3012kB high:3616kB active:72764kB inactive:209288kB present:370292kB pages_scanned:0 all_unreclaimable? no
[  356.824725] lowmem_reserve[]: 0 0 0 0
[  356.824728] Node 0 Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
[  356.824733] lowmem_reserve[]: 0 0 0 0
[  356.824736] Node 0 HighMem free:0kB min:128kB low:128kB high:128kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
[  356.824742] lowmem_reserve[]: 0 0 0 0
[  356.824745] Node 0 DMA: 1*4kB 0*8kB 1*16kB 1*32kB 0*64kB 3*128kB 2*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1460kB
[  356.824755] Node 0 DMA32: 1*4kB 0*8kB 0*16kB 0*32kB 1*64kB 0*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 836kB
[  356.824765] Node 0 Normal: empty
[  356.824767] Node 0 HighMem: empty
[  356.824771] Swap cache: add 0, delete 0, find 0/0, race 0+0
[  356.824773] Free swap  = 0kB
[  356.824775] Total swap = 0kB
[  356.824777] Free swap:            0kB
[  356.827153] 97952 pages of RAM
[  356.827156] 3849 reserved pages
[  356.827158] 40242 pages shared
[  356.827160] 0 pages swap cached
[  356.827169] [fglrx:firegl_alloc_page] *ERROR* Failed to get a free page at index 657
[  356.827173] [fglrx:firegl_bind_pcie] *ERROR* Failed to allocate page for ATI GART
[  356.827268] [fglrx:firegl_bind_pcie] *ERROR* Free the allocated pages
[  356.829917] [fglrx:firegl_unlock] *ERROR* Process 7606 using kernel context 0
[  358.680408] Bluetooth: Core ver 2.8
[  358.680412] NET: Registered protocol family 31
[  358.680414] Bluetooth: HCI device and connection manager initialized
[  358.680429] Bluetooth: HCI socket layer initialized
[  358.808733] Bluetooth: L2CAP ver 2.8
[  358.808737] Bluetooth: L2CAP socket layer initialized
[  359.484545] Bluetooth: RFCOMM socket layer initialized
[  359.484561] Bluetooth: RFCOMM TTY layer initialized
[  359.484564] Bluetooth: RFCOMM ver 1.7
[  362.722368] sky2 eth0: enabling interface
[  362.723628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  363.063186] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  364.183136] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  367.840879] fgconsole[9104]: segfault at 00000000a1be64b8 rip 00000000004005df rsp 00000000a1be64b0 error 4
[  370.994262] usb 1-1: new high speed USB device using ehci_hcd and address 3
[  371.047648] usb 1-1: configuration #1 chosen from 1 choice
[  371.047792] scsi0 : SCSI emulation for USB Mass Storage devices
[  371.047888] usb-storage: device found at 3
[  371.047891] usb-storage: waiting for device to settle before scanning
[  374.235808]   Vendor: Generic   Model: USB Flash Disk    Rev: 2.00
[  374.235821]   Type:   Direct-Access                      ANSI SCSI revision: 02
[  375.111772] ready
[  375.112044] SCSI device sda: 511488 512-byte hdwr sectors (262 MB)
[  375.112374] sda: Write Protect is off
[  375.112377] sda: Mode Sense: 03 00 00 00
[  375.112380] sda: assuming drive cache: write through
[  375.113760] SCSI device sda: 511488 512-byte hdwr sectors (262 MB)
[  375.114037] sda: Write Protect is off
[  375.114040] sda: Mode Sense: 03 00 00 00
[  375.114043] sda: assuming drive cache: write through
[  375.114045]  sda: unknown partition table
[  375.115411] sd 0:0:0:0: Attached scsi removable disk sda
[  375.115456] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  375.116188] usb-storage: device scan complete
[  376.233016] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  390.222424] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  404.317064] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  416.084523] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  431.554751] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  442.426806] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  461.794205] APIC error on CPU0: 00(40)
[  475.324663] APIC error on CPU0: 40(40)
[  499.225483] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  553.574604] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  607.923353] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  662.272767] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  716.621417] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  770.971053] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.


lspci:

Code: Select all

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 80)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
03:07.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
03:07.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
03:07.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
03:07.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
03:09.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)


lsmod:

Code: Select all

Module                  Size  Used by
nls_iso8859_1           6400  1
nls_cp437               8192  1
rfcomm                 37280  0
l2cap                  22784  5 rfcomm
bluetooth              46596  4 rfcomm,l2cap
snd_pcm_oss            39200  0
snd_mixer_oss          17152  1 snd_pcm_oss
snd_seq_dummy           4356  0
snd_seq_oss            34560  0
snd_seq_midi_event      8448  1 snd_seq_oss
snd_seq                56448  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
fglrx                 456692  0
snd_seq_device          8720  3 snd_seq_dummy,snd_seq_oss,snd_seq
pcmcia                 35352  0
joydev                 10752  0
tsdev                   8448  0
shpchp                 38700  0
pci_hotplug            14340  1 shpchp
snd_atiixp_modem       15500  0
snd_atiixp             19348  0
snd_ac97_codec        108120  2 snd_atiixp_modem,snd_atiixp
snd_ac97_bus            3712  1 snd_ac97_codec
snd_pcm                81032  4 snd_pcm_oss,snd_atiixp_modem,snd_atiixp,snd_ac97_codec
yenta_socket           26380  1
evdev                  10624  1
rsrc_nonstatic         12032  1 yenta_socket
bcm43xx               119180  0
pcmcia_core            38692  3 pcmcia,yenta_socket,rsrc_nonstatic
snd_timer              22792  2 snd_seq,snd_pcm
sdhci                  14720  0
mmc_core               23552  1 sdhci
serio_raw               7428  0
ieee80211softmac       26752  1 bcm43xx
snd_page_alloc          9360  3 snd_atiixp_modem,snd_atiixp,snd_pcm
ieee80211              30152  2 bcm43xx,ieee80211softmac
ieee80211_crypt         6656  1 ieee80211
sky2                   38916  0
sbp2                   23432  0
ohci1394               32072  0
ieee1394               96504  2 sbp2,ohci1394
sl811_hcd              13056  0
ohci_hcd               20228  0
uhci_hcd               23056  0
ehci_hcd               29320  0


[/code]

[rky]

-boot parameters: gentoo xgl opengl=ati xserver=fglrx noapic

poichè come detto il driver video impostato è comunque radeon e non fglrx vi posto dmesg dopo che a mano ho impostato fglrx in xorg.conf e ho fatto ripartire kdm:

dmesg:

Code: Select all

: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000017ea0000 (usable)
[    0.000000]  BIOS-e820: 0000000017ea0000 - 0000000017ea5000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000017ea5000 - 0000000017f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000017f00000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f85c0
[    0.000000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0000000017ea0302
[    0.000000] ACPI: FADT (v001 ATI    Piranha  0x06040000 ATI  0x000f4240) @ 0x0000000017ea4e20
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x0000000017ea4e94
[    0.000000] ACPI: MADT (v001 PTLTD      APIC   0x06040000  LTP 0x00000000) @ 0x0000000017ea4f6a
[    0.000000] ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x0000000017ea4fc4
[    0.000000] ACPI: DSDT (v001    ATI    SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000017ea0000
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-0000000017ea0000
[    0.000000] On node 0 totalpages: 94255
[    0.000000]   DMA zone: 1682 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 92573 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID:          Product ID:              APIC at: 0xFEE00000
[    0.000000] I/O APIC #1 Version 33 at 0xFEC00000.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Processors: 1
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ 1808000000 size 32 MB
[    0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[    0.000000] No AGP bridge found
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=/dev/ram0 initrd=/boot/smp.igz init=/linuxrc cdroot doslowusb looptype=squashfs max_loop=64 loop=/livecd.squashfs splash=silent,theme:default vga=791 CONSOLE=/dev/tty1 quiet BOOT_IMAGE=/boot/smp opengl=ati xgl xdriver=fglrx noapic
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[    0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[    0.000000] time.c: Detected 1790.891 MHz processor.
[   50.036219] Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized
[   50.036236] Console: colour dummy device 80x25
[   50.036954] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[   50.037425] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[   50.043834] Memory: 372436k/391808k available (5034k kernel code, 18980k reserved, 2033k data, 260k init)
[   50.103068] Calibrating delay using timer specific routine.. 3583.99 BogoMIPS (lpj=1791997)
[   50.103131] Security Framework v1.0.0 initialized
[   50.103138] Capability LSM initialized
[   50.103166] Mount-cache hash table entries: 256
[   50.103322] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   50.103326] CPU: L2 Cache: 1024K (64 bytes/line)
[   50.103329] CPU 0/0(1) -> Node 0 -> Core 0
[   50.109867] ACPI: setting ELCR to 0200 (from 0c80)
[   50.113600] Using local APIC timer interrupts.
[   50.169366] result 12436752
[   50.169368] Detected 12.436 MHz APIC timer.
[   50.170016] Brought up 1 CPUs
[   50.170025] testing NMI watchdog ... OK.
[   50.180206] migration_cost=0
[   50.180309] checking if image is initramfs... it is
[   50.406171] Freeing initrd memory: 3719k freed
[   50.406696] NET: Registered protocol family 16
[   50.406726] ACPI: bus type pci registered
[   50.411981] PCI: Using MMCONFIG at e0000000
[   50.412025] PCI: No mmconfig possible on device 0:18
[   50.413016] ACPI: Subsystem revision 20060127
[   50.419010] ACPI: Interpreter enabled
[   50.419012] ACPI: Using PIC for interrupt routing
[   50.419366] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   50.419369] PCI: Probing PCI hardware (bus 00)
[   50.421748] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[   50.422074] Boot video device is 0000:01:05.0
[   50.422693] PCI: Transparent bridge - 0000:00:14.4
[   50.422763] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
[   50.422766] Please report the result to linux-kernel to fix this permanently
[   50.422797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   50.426204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[   50.427267] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[   50.427492] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
[   50.427723] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *7
[   50.427943] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
[   50.428166] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[   50.428387] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[   50.428643] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[   50.428872] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[   50.429670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   50.430009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   50.430432] ACPI: Embedded Controller [EC] (gpe 16) interrupt mode.
[   50.430561] Linux Plug and Play Support v0.97 (c) Adam Belay
[   50.430571] pnp: PnP ACPI init
[   50.433047] pnp: PnP ACPI: found 10 devices
[   50.433216] SCSI subsystem initialized
[   50.433266] usbcore: registered new driver usbfs
[   50.433298] usbcore: registered new driver hub
[   50.433336] PCI: Using ACPI for IRQ routing
[   50.433339] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   50.433432] TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
[   50.433477] PCI-DMA: Disabling IOMMU.
[   50.433902] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[   50.433906] pnp: 00:08: ioport range 0x200-0x20f has been reserved
[   50.433936] PCI: Bridge: 0000:00:01.0
[   50.433939]   IO window: 2000-2fff
[   50.433943]   MEM window: c0100000-c01fffff
[   50.433946]   PREFETCH window: c8000000-cfffffff
[   50.433949] PCI: Bridge: 0000:00:06.0
[   50.433952]   IO window: 3000-3fff
[   50.433955]   MEM window: c0200000-c02fffff
[   50.433958]   PREFETCH window: 32000000-320fffff
[   50.433964] PCI: Bus 4, cardbus bridge: 0000:03:07.0
[   50.433967]   IO window: 00004000-000040ff
[   50.433972]   IO window: 00004400-000044ff
[   50.433979]   PREFETCH window: 30000000-31ffffff
[   50.433985]   MEM window: 34000000-35ffffff
[   50.433991] PCI: Bridge: 0000:00:14.4
[   50.433994]   IO window: 4000-4fff
[   50.434001]   MEM window: c0300000-c03fffff
[   50.434006]   PREFETCH window: 30000000-31ffffff
[   50.434022] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   50.434139] ACPI: PCI Interrupt Link [LNKE] disabled and referenced, BIOS bug.
[   50.434190] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[   50.434193] PCI: setting IRQ 11 as level-triggered
[   50.434199] ACPI: PCI Interrupt 0000:03:07.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[   50.434258] NET: Registered protocol family 2
[   50.443661] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[   50.443809] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[   50.444116] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[   50.444280] TCP: Hash tables configured (established 16384 bind 8192)
[   50.444283] TCP reno registered
[   50.444580] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   50.446479] audit: initializing netlink socket (disabled)
[   50.446490] audit(1157844498.410:1): initialized
[   50.446549] Total HugeTLB memory allocated, 0
[   50.446684] VFS: Disk quotas dquot_6.5.1
[   50.446709] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   50.446741] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[   50.446869] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[   50.446968] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   50.447232] NTFS driver 2.1.27 [Flags: R/W].
[   50.447274] fuse init (API version 7.6)
[   50.447367] JFS: nTxBlock = 2938, nTxLock = 23509
[   50.450211] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   50.450404] SGI XFS Quota Management subsystem
[   50.450447] Initializing Cryptographic API
[   50.450452] io scheduler noop registered
[   50.450463] io scheduler anticipatory registered
[   50.450471] io scheduler deadline registered
[   50.450493] io scheduler cfq registered (default)
[   51.102197] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   51.102203] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[   51.102220] assign_interrupt_mode Found MSI capability
[   51.102224] Allocate Port Service[0000:00:06.0:pcie00]
[   51.102260] Allocate Port Service[0000:00:06.0:pcie01]
[   51.102294] Allocate Port Service[0000:00:06.0:pcie03]
[   51.124086] Real Time Clock Driver v1.12ac
[   51.124113] initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
[   51.124135] Linux agpgart interface v0.101 (c) Dave Jones
[   51.124225] vesafb: framebuffer at 0xc8000000, mapped to 0xffffc20010300000, using 3072k, total 131072k
[   51.124229] vesafb: mode is 1024x768x16, linelength=2048, pages=84
[   51.124232] vesafb: scrolling: redraw
[   51.124235] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   51.215857] Console: switching to colour frame buffer device 128x48
[   51.217266] fbsplash: console 0 using theme 'default'
[   51.652846] fbsplash: switched splash state to 'on' on console 0
[   51.653267] fb0: VESA VGA frame buffer device
[   51.653585] ACPI: AC Adapter [AC] (on-line)
[   51.653793] ACPI: Battery Slot [BAT0] (battery absent)
[   51.653812] ACPI: Power Button (FF) [PWRF]
[   51.653817] ACPI: Power Button (CM) [PWRB]
[   51.653826] ACPI: Sleep Button (CM) [SLPB]
[   51.653834] ACPI: Lid Switch [LID]
[   51.653909] Using specific hotkey driver
[   51.653970] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   51.653975] ACPI: Processor [CPU0] (supports 8 throttling states)
[   51.656614] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   51.657356] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[   51.657360] PCI: setting IRQ 10 as level-triggered
[   51.657366] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[   51.657458] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   51.659868] serio: i8042 AUX port at 0x60,0x64 irq 12
[   51.659936] serio: i8042 KBD port at 0x60,0x64 irq 1
[   51.660112] mice: PS/2 mouse device common for all mice
[   51.660571] mk712: device not present
[   51.688146] input: AT Translated Set 2 keyboard as /class/input/input0
[   52.277702] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
[   52.317068] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[   54.666980] floppy0: no floppy controllers found
[   54.667460] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[   54.669594] loop: loaded (max 64 devices)
[   54.669596] Compaq SMART2 Driver (v 2.6.0)
[   54.669638] HP CISS Driver (v 2.6.10)
[   54.670027] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   54.670031] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   54.670097] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[   54.670353] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   54.670357] ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   54.670368] ATIIXP: chipset revision 128
[   54.670371] ATIIXP: not 100% native mode: will probe irqs later
[   54.670380]     ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
[   54.670397]     ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
[   54.670407] Probing IDE interface ide0...
[   54.933987] hda: FUJITSU MHV2080AT PL, ATA DISK drive
[   55.548150] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   55.548206] Probing IDE interface ide1...
[   56.218983] hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
[   56.524703] ide1 at 0x170-0x177,0x376 on irq 15
[   56.525657] hda: max request size: 128KiB
[   56.598787] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[   56.603501] hda: cache flushes supported
[   56.603536]  hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[   56.644478] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[   56.644485] Uniform CD-ROM driver Revision: 3.20
[   56.662703] Adaptec aacraid driver (1.1-5[2409]-mh1)
[   56.662814] Emulex LightPulse Fibre Channel SCSI driver 8.1.6
[   56.662817] Copyright(c) 2004-2006 Emulex.  All rights reserved.
[   56.662973] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
[   56.662979] megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
[   56.663009] megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
[   56.663072] GDT-HA: Storage RAID Controller Driver. Version: 3.04
[   56.663172] GDT-HA: Found 0 PCI Storage RAID Controllers
[   56.663195] 3ware Storage Controller device driver for Linux v1.26.02.001.
[   56.663223] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
[   56.663258] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
[   56.663304] libata version 1.20 loaded.
[   56.663730] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[   56.663765] osst :I: Tape driver with OnStream support version 0.99.4
[   56.663767] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   56.663880] SCSI Media Changer driver v0.25
[   56.663909] I2O subsystem v1.325
[   56.663912] i2o: max drivers = 8
[   56.663992] I2O Configuration OSM v1.323
[   56.664044] I2O Bus Adapter OSM v1.317
[   56.664066] I2O Block Device OSM v1.325
[   56.664152] I2O SCSI Peripheral OSM v1.316
[   56.664175] I2O ProcFS OSM v1.316
[   56.664198] Fusion MPT base driver 3.03.09
[   56.664201] Copyright (c) 1999-2005 LSI Logic Corporation
[   56.664206] Fusion MPT SPI Host driver 3.03.09
[   56.664242] Fusion MPT FC Host driver 3.03.09
[   56.664278] Fusion MPT SAS Host driver 3.03.09
[   56.664319] Fusion MPT misc device (ioctl) driver 3.03.09
[   56.664345] mptctl: Registered with Fusion MPT base driver
[   56.664348] mptctl: /dev/mptctl @ (major,minor=10,220)
[   56.664351] usbmon: debugfs is not available
[   56.664353] Initializing USB Mass Storage driver...
[   56.664385] usbcore: registered new driver usb-storage
[   56.664388] USB Mass Storage support registered.
[   56.664411] usbcore: registered new driver libusual
[   56.664435] usbcore: registered new driver hiddev
[   56.664459] usbcore: registered new driver usbhid
[   56.664462] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   56.664477] md: linear personality registered for level -1
[   56.664480] md: raid0 personality registered for level 0
[   56.664482] md: raid1 personality registered for level 1
[   56.664485] md: raid10 personality registered for level 10
[   56.664488] md: raid5 personality registered for level 5
[   56.664490] md: raid4 personality registered for level 4
[   56.664494] raid5: automatically using best checksumming function: generic_sse
[   56.668832]    generic_sse:  5440.000 MB/sec
[   56.668835] raid5: using function: generic_sse (5440.000 MB/sec)
[   56.685834] raid6: int64x1   1625 MB/s
[   56.702798] raid6: int64x2   2058 MB/s
[   56.719762] raid6: int64x4   2003 MB/s
[   56.736734] raid6: int64x8   1433 MB/s
[   56.753724] raid6: sse2x1    2230 MB/s
[   56.770688] raid6: sse2x2    2992 MB/s
[   56.787661] raid6: sse2x4    3214 MB/s
[   56.787663] raid6: using algorithm sse2x4 (3214 MB/s)
[   56.787667] md: raid6 personality registered for level 6
[   56.787670] md: multipath personality registered for level -4
[   56.787672] md: faulty personality registered for level -5
[   56.787675] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   56.787678] md: bitmap version 4.39
[   56.787767] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[   56.787937] Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
[   56.787940] ALSA device list:
[   56.787942]   No soundcards found.
[   56.788012] TCP bic registered
[   56.788014] Initializing IPsec netlink socket
[   56.788027] NET: Registered protocol family 1
[   56.788068] NET: Registered protocol family 10
[   56.788165] lo: Disabled Privacy Extensions
[   56.788230] IPv6 over IPv4 tunneling driver
[   56.788309] NET: Registered protocol family 17
[   56.788313] NET: Registered protocol family 15
[   56.788414] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[   56.788456] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[   56.788460] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
[   56.788463] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[   56.788468] cpu_init done, current fid 0xa, vid 0xa
[   56.788562] ACPI wakeup devices:
[   56.788565] SLPB  LID  PB6 MODM
[   56.788569] ACPI: (supports S0 S3 S4 S5)
[   56.788600] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   56.788949] Freeing unused kernel memory: 260k freed
[   57.233926] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   57.233932] ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   57.234323] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   57.234462] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[   57.234523] ehci_hcd 0000:00:13.2: irq 11, io mem 0xc0002000
[   57.234536] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   57.234648] usb usb1: configuration #1 chosen from 1 choice
[   57.234688] hub 1-0:1.0: USB hub found
[   57.234697] hub 1-0:1.0: 8 ports detected
[   57.363524] USB Universal Host Controller Interface driver v3.0
[   57.383331] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[   57.383399] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   57.383837] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   57.383956] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[   57.383978] ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0000000
[   57.434752] usb usb2: configuration #1 chosen from 1 choice
[   57.434795] hub 2-0:1.0: USB hub found
[   57.434807] hub 2-0:1.0: 4 ports detected
[   57.535564] ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   57.535716] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   57.535832] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[   57.535854] ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0001000
[   57.586506] usb usb3: configuration #1 chosen from 1 choice
[   57.586544] hub 3-0:1.0: USB hub found
[   57.586556] hub 3-0:1.0: 4 ports detected
[   57.710147] sl811: driver sl811-hcd, 19 May 2005
[   57.737238] ieee1394: Initialized config rom entry `ip1394'
[   57.752160] usb 2-2: new low speed USB device using ohci_hcd and address 2
[   57.761792] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[   57.761796] ACPI: PCI Interrupt 0000:03:07.2[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
[   57.812130] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[c0309000-c03097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   57.836561] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[   57.836566] ieee1394: sbp2: Try serialize_io=0 for better performance
[   57.938150] usb 2-2: configuration #1 chosen from 1 choice
[   57.947144] input: Logitech Optical USB Mouse as /class/input/input2
[   57.947175] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2
[   89.388701] attempt to access beyond end of device
[   89.388706] hda4: rw=0, want=66, limit=2
[   89.388710] isofs_fill_super: bread failed, dev=hda4, iso_blknum=16, block=32
[   92.331556] ISO 9660 Extensions: Microsoft Joliet Level 3
[   92.336952] Unable to load NLS charset iso8859-1
[   92.342114] Unable to load NLS charset iso8859-1
[   92.420557] ISO 9660 Extensions: RRIP_1991A
[  122.189694] usb 1-1: new high speed USB device using ehci_hcd and address 3
[  122.308877] usb 1-1: configuration #1 chosen from 1 choice
[  122.309367] scsi0 : SCSI emulation for USB Mass Storage devices
[  122.309507] usb-storage: device found at 3
[  122.309510] usb-storage: waiting for device to settle before scanning
[  127.302733]   Vendor: Generic   Model: USB Flash Disk    Rev: 2.00
[  127.302743]   Type:   Direct-Access                      ANSI SCSI revision: 02
[  128.359281] ready
[  128.360026] SCSI device sda: 511488 512-byte hdwr sectors (262 MB)
[  128.360648] sda: Write Protect is off
[  128.360651] sda: Mode Sense: 03 00 00 00
[  128.360653] sda: assuming drive cache: write through
[  128.363272] SCSI device sda: 511488 512-byte hdwr sectors (262 MB)
[  128.363894] sda: Write Protect is off
[  128.363896] sda: Mode Sense: 03 00 00 00
[  128.363898] sda: assuming drive cache: write through
[  128.363902]  sda: unknown partition table
[  128.366714] sd 0:0:0:0: Attached scsi removable disk sda
[  128.367109] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  128.367552] usb-storage: device scan complete
[  139.887884] ACPI: PCI Interrupt 0000:03:07.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[  139.887899] Yenta: CardBus bridge found at 0000:03:07.0 [161f:2043]
[  139.887924] Yenta: Using CSCINT to route CSC interrupts to PCI
[  139.887927] Yenta: Routing CardBus interrupts to PCI
[  139.887934] Yenta TI: socket 0000:03:07.0, mfunc 0x00001b22, devctl 0x44
[  139.995272] sdhci: Secure Digital Host Controller Interface driver, 0.11
[  139.995276] sdhci: Copyright(c) Pierre Ossman
[  140.084217] ieee80211_crypt: registered algorithm 'NULL'
[  140.085870] ieee80211: 802.11 data/management/control stack, git-1.1.7
[  140.085873] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[  140.110302] Yenta: ISA IRQ mask 0x00f8, PCI irq 11
[  140.110308] Socket status: 30000006
[  140.110312] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[  140.110317] pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
[  140.110321] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[  140.145473] ACPI: PCI Interrupt 0000:03:07.4[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[  140.246216] mmc0: SDHCI at 0xc030a000 irq 11 PIO
[  140.352427] mmc1: SDHCI at 0xc0309c00 irq 11 PIO
[  140.454348] mmc2: SDHCI at 0xc0309800 irq 11 PIO
[  140.521907] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[  140.521914] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[  140.521929] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  140.522714] sky2 v1.5 addr 0xc0200000 irq 10 Yukon-EC (0xb6) rev 2
[  140.572831] sky2 eth0: addr 00:03:25:38:8b:4c
[  141.069337] bcm43xx driver
[  141.069716] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[  141.069720] ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[  144.360154] ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[  145.123974] ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[  145.754986] MC'97 1 converters and GPIO not ready (0xf00f)
[  148.709224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  148.843568] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  151.452659] ts: Compaq touchscreen protocol output
[  182.169301] spurious 8259A interrupt: IRQ7.
[  264.499856] fbsplash: console 1 using theme 'default'
[  264.505038] fbsplash: switched splash state to 'on' on console 1
[  264.518184] fbsplash: console 2 using theme 'default'
[  264.523317] fbsplash: switched splash state to 'on' on console 2
[  264.531301] fbsplash: console 3 using theme 'default'
[  264.536417] fbsplash: switched splash state to 'on' on console 3
[  264.541164] fbsplash: console 4 using theme 'default'
[  264.571649] fbsplash: switched splash state to 'on' on console 4
[  264.587782] fbsplash: console 5 using theme 'default'
[  264.592900] fbsplash: switched splash state to 'on' on console 5
[  264.596619] fbsplash: console 11 using theme 'default'
[  264.601767] fbsplash: switched splash state to 'on' on console 11
[  269.755835] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[  269.759987] [fglrx] Maximum main memory to use for locked dma buffers: 306 MBytes.
[  269.760002] [fglrx] module loaded - fglrx 8.27.10 [Jul 27 2006] on minor 0
[  269.876678] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[  271.102617] Xorg: page allocation failure. order:0, mode:0x1024
[  271.102626]
[  271.102627] Call Trace: <ffffffff8020ed91>{__alloc_pages+651} <ffffffff8026cc3f>{dma_alloc_pages+155}
[  271.102657]        <ffffffff80221752>{dma_alloc_coherent+121} <ffffffff8816215e>{:fglrx:firegl_alloc_page+222}
[  271.102741]        <ffffffff88161805>{:fglrx:firegl_bind_pcie+261} <ffffffff8815d7b2>{:fglrx:create_buffer_queue+402}
[  271.102788]        <ffffffff881547ff>{:fglrx:firegl_addmap+1087} <ffffffff8815cbda>{:fglrx:firegl_alloc_bufs+298}
[  271.102835]        <ffffffff80221603>{__up_read+19} <ffffffff8815cab0>{:fglrx:firegl_alloc_bufs+0}
[  271.102862]        <ffffffff88159385>{:fglrx:firegl_ioctl+437} <ffffffff80241532>{do_ioctl+85}
[  271.102894]        <ffffffff8022f642>{vfs_ioctl+594} <ffffffff80216557>{vfs_write+316}
[  271.102906]        <ffffffff8024c384>{sys_ioctl+89} <ffffffff8025e28e>{system_call+126}
[  271.102925] Mem-info:
[  271.102927] Node 0 DMA per-cpu:
[  271.102931] cpu 0 hot: high 0, batch 1 used:0
[  271.102934] cpu 0 cold: high 0, batch 1 used:0
[  271.102936] Node 0 DMA32 per-cpu:
[  271.102939] cpu 0 hot: high 186, batch 31 used:30
[  271.102942] cpu 0 cold: high 62, batch 15 used:13
[  271.102944] Node 0 Normal per-cpu: empty
[  271.102947] Node 0 HighMem per-cpu: empty
[  271.102952] Free pages:        2292kB (0kB HighMem)
[  271.102957] Active:19122 inactive:51718 dirty:0 writeback:0 unstable:0 free:573 slab:19020 mapped:9783 pagetables:488
[  271.102960] Node 0 DMA free:1460kB min:40kB low:48kB high:60kB active:228kB inactive:0kB present:6728kB pages_scanned:0 all_unreclaimable? no
[  271.102966] lowmem_reserve[]: 0 361 361 361
[  271.102970] Node 0 DMA32 free:832kB min:2412kB low:3012kB high:3616kB active:76260kB inactive:206872kB present:370292kB pages_scanned:0 all_unreclaimable? no
[  271.102977] lowmem_reserve[]: 0 0 0 0
[  271.102981] Node 0 Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
[  271.102986] lowmem_reserve[]: 0 0 0 0
[  271.102989] Node 0 HighMem free:0kB min:128kB low:128kB high:128kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
[  271.102995] lowmem_reserve[]: 0 0 0 0
[  271.102998] Node 0 DMA: 1*4kB 0*8kB 1*16kB 1*32kB 0*64kB 3*128kB 2*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1460kB
[  271.103008] Node 0 DMA32: 0*4kB 0*8kB 0*16kB 0*32kB 1*64kB 0*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 832kB
[  271.103018] Node 0 Normal: empty
[  271.103020] Node 0 HighMem: empty
[  271.103025] Swap cache: add 0, delete 0, find 0/0, race 0+0
[  271.103028] Free swap  = 0kB
[  271.103029] Total swap = 0kB
[  271.103031] Free swap:            0kB
[  271.106677] 97952 pages of RAM
[  271.106680] 3849 reserved pages
[  271.106682] 40991 pages shared
[  271.106684] 0 pages swap cached
[  271.106688] [fglrx:firegl_alloc_page] *ERROR* Failed to get a free page at index 526
[  271.106692] [fglrx:firegl_bind_pcie] *ERROR* Failed to allocate page for ATI GART
[  271.106776] [fglrx:firegl_bind_pcie] *ERROR* Free the allocated pages
[  271.107372] [fglrx:firegl_unlock] *ERROR* Process 7758 using kernel context 0
[  273.306466] Bluetooth: Core ver 2.8
[  273.306470] NET: Registered protocol family 31
[  273.306473] Bluetooth: HCI device and connection manager initialized
[  273.306488] Bluetooth: HCI socket layer initialized
[  273.536210] Bluetooth: L2CAP ver 2.8
[  273.536213] Bluetooth: L2CAP socket layer initialized
[  274.418981] Bluetooth: RFCOMM socket layer initialized
[  274.418995] Bluetooth: RFCOMM TTY layer initialized
[  274.418998] Bluetooth: RFCOMM ver 1.7
[  276.544539] sky2 eth0: enabling interface
[  276.546263] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  276.763254] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  277.856510] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  281.678978] fgconsole[9256]: segfault at 00000000251c0a98 rip 00000000004005df rsp 00000000251c0a90 error 4
[  288.511932] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  301.127630] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  312.465226] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  322.460989] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  332.430640] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  342.398653] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  373.994732] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[  377.396202] [fglrx] total      GART = 134217728
[  377.396209] [fglrx] free       GART = 118226944
[  377.396213] [fglrx] max single GART = 118226944
[  377.396216] [fglrx] total      LFB  = 128839680
[  377.396220] [fglrx] free       LFB  = 122548224
[  377.396223] [fglrx] max single LFB  = 122548224
[  377.396226] [fglrx] total      Inv  = 0
[  377.396228] [fglrx] free       Inv  = 0
[  377.396231] [fglrx] max single Inv  = 0
[  377.396234] [fglrx] total      TIM  = 0


lspci ovviamente è quello di prima, mentre lsmod presente solo il modulo fglrx in più.

Ciao